Use of stereo camera systems for assessment of rockfish abundance in untrawlable areas and for recording pollock behavior during midwater trawls

We describe the application of two types of stereo camera systems in fisheries research, including the design, calibration, analysis techniques, and precision of the data obtained with these systems. The first is a stereo video system deployed by using a quick-responding winch with a live feed to provide species- and size- composition data adequate to produce acoustically based biomass estimates of rockfish. This system was tested on the eastern Bering Sea slope where rockfish were measured. Rockfish sizes were similar to those sampled with a bottom trawl and the relative error in multiple measurements of the same rockfish in multiple still-frame images was small. Measurement errors of up to 5.5% were found on a calibration target of known size. The second system consisted of a pair of still-image digital cameras mounted inside a midwater trawl. Processing of the stereo images allowed fish length, fish orientation in relation to the camera platform, and relative distance of the fish to the trawl netting to be determined. The video system was useful for surveying fish in Alaska, but it could also be used broadly in other situations where it is difficult to obtain species-composition or size-composition information. Likewise, the still-image system could be used for fisheries research to obtain data on size, position, and orientation of fish.

Establishing species–habitat associations for 4 eteline snappers with the use of a baited stereo-video camera system

With the use of a baited stereo-video camera system, this study semiquantitatively defined the habitat associations of 4 species of Lutjanidae: Opakapaka (Pristipomoides filamentosus), Kalekale (P. sieboldii), Onaga (Etelis coruscans), and Ehu (E. carbunculus). Fish abundance and length data from 6 locations in the main Hawaiian Islands were evaluated for species-specific and size-specific differences between regions and habitat types. Multibeam bathymetry and backscatter were used to classify habitats into 4 types on the basis of substrate (hard or soft) and slope (high or low). Depth was a major influence on bottomfish distributions. Opakapaka occurred at depths shallower than the depths at which other species were observed, and this species showed an ontogenetic shift to deeper water with increasing size. Opakapaka and Ehu had an overall preference for hard substrate with low slope (hard-low), and Onaga was found over both hard-low and hard-high habitats. No significant habitat preferences were recorded for Kalekale. Opakapaka, Kalekale, and Onaga exhibited size-related shifts with habitat type. A move into hard-high environments with increasing size was evident for Opakapaka and Kalekale. Onaga was seen predominantly in hard-low habitats at smaller sizes and in either hard-low or hard-high at larger sizes. These ontogenetic habitat shifts could be driven by reproductive triggers because they roughly coincided with the length at sexual maturity of each species. However, further studies are required to determine causality. No ontogenetic shifts were seen for Ehu, but only a limited number of juveniles were observed. Regional variations in abundance and length were also found and could be related to fishing pressure or large-scale habitat features.

A video method for quantifying size distribution, density, and three-dimensional spatial structure of reef fish spawning aggregations

There is a clear need to develop fisheries independent methods to quantify individual sizes, density, and three dimensional characteristics of reef fish spawning aggregations for use in population assessments and to provide critical baseline data on reproductive life history of exploited populations. We designed, constructed, calibrated, and applied an underwater stereo-video system to estimate individual sizes and three dimensional (3D) positions of Nassau grouper (Epinephelus striatus) at a spawning aggregation site located on a reef promontory on the western edge of Little Cayman Island, Cayman Islands, BWI, on 23 January 2003. The system consists of two free-running camcorders mounted on a meter-long bar and supported by a SCUBA diver. Paired video “stills” were captured, and nose and tail of individual fish observed in the field of view of both cameras were digitized using image analysis software. Conversion of these two dimensional screen coordinates to 3D coordinates was achieved through a matrix inversion algorithm and calibration data. Our estimate of mean total length (58.5 cm, n = 29) was in close agreement with estimated lengths from a hydroacoustic survey and from direct measures of fish size using visual census techniques. We discovered a possible bias in length measures using the video method, most likely arising from some fish orientations that were not perpendicular with respect to the optical axis of the camera system. We observed 40 individuals occupying a volume of 33.3 m3, resulting in a concentration of 1.2 individuals m–3 with a mean (SD) nearest neighbor distance of 70.0 (29.7) cm. We promote the use of roving diver stereo-videography as a method to assess the size distribution, density, and 3D spatial structure of fish spawning aggregations.

A study of populations of the anchoveta, Cetengraulis mysticetus, based on meristic characters

ENGLISH: This study was undertaken to determine whether meristic characters indicate that more than one major population of anchovetas occurs in the range of the species from Mexico to Peru. Interest in this species lies in the fact that it is the principal bait fish used to catch yellowfin and skipjack tunas in the Eastern Pacific. Specimens examined were from collections made by California tuna fishing vessels at six major baiting localities covering nearly the entire range of the species, namely, Almejas Bay on the outer coast of Baja California, Guaymas and Ahome Point in the Gulf of California, Gulf of Fonseca, Gulf of Panama, and Gulf of Guayaquil. Four meristic characters were selected for study: vertebrae, dorsal fin rays, anal fin rays, and gill rakers on the first gill arch. Vertebral counts, using X-ray film, were taken from a total of 1,500 fish, 250 each from each of the six localities. For the other characters, 125 anchovetas were examined from each locality for a total of 750, the counts being made with the aid of a binocular microscope. Specimens were between 80 and 165 mm. standard length. SPANISH: Este estudio ha sido hecho con el propósito de determinar si los caracteres numéricos de las anchovetas indican que existe más de una población de este pez en la zona en que se encuentra la especie, comprendida entre México y Perú. El interés en dicha especie radica en el hecho de que éste es el pez de carnada usado principalmente para la pesca de los atunes "aleta amarilla" y "barrilete" en el Pacífico Oriental. Los especímenes que han sido examinados, se tomaron de las muestras recogidas por los barcos atuneros de California en seis de las mejores localidades en que se pesca la anchoveta, las cuales comprenden casi toda la zona en donde se encuentra la especie, a saber, Bahía de Almejas en la costa exterior de Baja California, Guaymas y Punta Ahorne en el Golfo de California, el Golfo de Fonseca, el Golfo de Panamá y el Golfo de Guayaquil. Cuatro caracteres numéricos fueron escogidos para su estudio: los que presentan 1) las vértebras, 2) los radios de la aleta dorsal, 3) los radios de la aleta anal y 4) las branquispinas del primer arco branquial. Mediante el uso de películas con rayos X, se contaron las vértebras en un total de 1,500 peces, es decir, 250 de cada una de las seis mencionadas localidades. En relación con los otros caracteres, se examinaron 125 anchovetas de cada área, o sea, un total de 750 ejemplares, habiendo sido hecho el conteo por medio de un microscopio binocular. Los especímenes tenían un largo standard entre 80 y 165 milímetros. (PDF contains 24 pages.)

Embryogenesis of Heterobranchus longifilis (Curvier and Valenciennes, 1840)

Studies on development of H. longifilis (Curvier and Valenciennes, 1840) were conducted at a temperature of 25EC ( 1Ec) in aquaria tanks continuous development were monitored with the use of wild Heerbrugy photomacroscope and length of yolk and larva were monitored using Stereo Olympus microscope with ocular micrometer. The division into animal and vegetal poles was observed 22 minutes after activation. The first cleavage occurred 65 minutes after activation while the second division which was perpendicular to the first line of division occurred 74 minutes after activation. This was quickly followed by the third and fourth cleavage at 80th and 82nd minutes after activation respectively. Morular stage was reached at 4 hours 20 minutes with formation of optic bud at 14 hours 35 minutes. (DBO) Developing embryo hatched after 27 hours of activation at a mean length of 6.63 and mean yolk length of 2.17. Yolk size decrease at an average rate of 38.5 % till the 5th day of total absorption. Growth of larvae proceeded faster in tail-anus region than in anus-snout portion of the body. The rate of yolk absorption and larva development (survival) as monitored in this work gives important information in Research and development programme for H. longifilis larva - an important aspect of Research development and implementation of appropriate technologies in small scale fisheries

BotCam: a baited camera system for nonextractive monitoring of bottomfish species

A stereo-video baited camera system (BotCam) has been developed as a fishery-independent tool to monitor and study deepwater fish species and their habitat. During testing, BotCam was deployed primarily in water depths between 100 and 300 m for an assessment of its use in monitoring and studying Hawaiian bottomfish species. Details of the video analyses and data from the pilot study with BotCam in Hawai`i are presented. Multibeam bathymetry and backscatter data were used to delineate bottomfish habitat strata, and a stratified random sampling design was used for BotCam deployment locations. Video data were analyzed to assess relative fish abundance and to measure f ish size composition. Results corroborate published depth ranges and zones of the target species, as well as their habitat preferences. The results indicate that BotCam is a promising tool for monitoring and studying demersal fish populations associated with deepwater habitats to a depth of 300 m, at mesohabitat scales. BotCam is a flexible, nonextractive, and economical means to better understand deepwater ecosystems and improve science-based ecosystem approaches to management.

Estimating species and size composition of rockfishes to verify targets in acoustic surveys of untrawlable areas

Rockfish (Sebastes spp.) biomass is difficult to assess with standard bottom trawl or acoustic surveys because of their propensity to aggregate near the seafloor in highrelief areas that are inaccessible to sampling by trawling. We compared the ability of a remotely operated vehicle (ROV), a modified bottom trawl, and a stereo drop camera system (SDC) to identify rockfish species and estimate their size composition. The ability to discriminate species was highest for the bottom trawl and lowest for the SDC. Mean lengths and size distributions varied among the gear types, although a larger number of length measurements could be collected with the bottom trawl and SDC than with the ROV. Dusky (S. variabilis), harlequin (S. variegatus), and northern rockfish (S. polyspinis), and Pacific ocean perch (S. alutus) were the species observed in greatest abundance. Only dusky and northern rockfish regularly occurred in trawlable areas, whereas these two species and many more occurred in untrawlable areas. The SDC was able to resolve the height of fish off the seafloor, and some of the rockfish species were observed only near the seafloor in the acoustic dead zone. This finding is important, in that fish found exclusively in the acoustic dead zone cannot be assessed acoustically. For these species, methods such as bottom trawls, long-lines, or optical surveys using line transect or area swept methods will be the only adequate means to estimate the abundance of these fishes. Our results suggest that the selection of appropriate methods for verifying targets will depend on the habitat types and species complexes to be examined.

Evaluation of rockfish abundance in untrawlable habitat: combining acoustic and complementary sampling tools

Rockfishes (Sebastes spp.) are an important component of North Pacific marine ecosystems and commercial fisheries. Because the rocky, high-relief substrate that rockfishes often inhabit is inaccessible to standard survey trawls, population abundance assessments for many rockfish species are difficult. As part of a large study to classify substrate and compare complementary sampling tools, we investigated the feasibility of using an acoustic survey in conjunction with a lowered stereo-video camera, a remotely operated vehicle, and a modified bottom trawl to estimate rockfish biomass in untrawlable habitat. The Snakehead Bank south of Kodiak Island, Alaska, was surveyed repeatedly over 4 days and nights. Dusky rockfish (S. variabilis), northern rockfish (S. polyspinis), and harlequin rockfish (S. variegatus) were the most abundant species observed on the bank. Backscatter attributed to rockfish were collected primarily near the seafloor at a mean height off the bottom of 1.5 m. Total rockfish backscatter and the height of backscatter off the bottom did not differ among survey passes or between night and day. Biomass estimates for the 41 square nautical-mile area surveyed on this small, predominantly untrawlable bank were 2350 metric tons (t) of dusky rockfish, 331 t of northern rockfish, and 137 t of harlequin rockfish. These biomass estimates are 5–60 times the density estimated for these rockfish species by a regularly conducted bottom trawl survey covering the bank and the surrounding shelf. This finding shows that bottom trawl surveys can underestimate the abundance of rockfishes in untrawlable areas and, therefore, may underestimate overall population abundance for these species.

Forty Years of Winter: Cetaceans Observed During the Southbound Migration of Gray Whales, Eschrichtius robustus, Near Granite Canyon, Central California

From December to February in most years from 1967 to 2007, observers counted gray whales, Eschrichtius robustus, from shore sites south of Carmel in central California. In addition to gray whales, other cetacean species were also recorded. These observations were summarized and compared among survey platforms and to ocean conditions. Eleven cetacean species were identified including eight odontocete species (killer whale, Orcinus orca; Pacific white-sided dolphin, Lagenorhynchus obliquidens; common dolphin, Delphinus spp.; bottlenose dolphin, Tursiops truncatus, northern right whale dolphin, Lissodelphis borealis; Risso’s dolphin, Grampus griseus; Dall’s porpoise, Phocoenoides dalli; and harbor porpoise, Phocoena phocoena) and three mysticete species (humpback whale, Megaptera novaeangliae; minke whale, Balaenoptera acutorostrata; and blue whale, Balaenoptera musculus). As expected, the detection of certain species among survey platforms (shore-based census watches, 25-power “Big Eye” binocular watches, and aerial surveys) was limited by species surfacing behavior and/or bathymetric preference. Comparisons among the shore-based census efforts showed a significant difference in sightings rates from 1967–84 (n = 14, mean = 0.11, SD = 0.11) to 1985–2007 (n = 11, mean = 1.48, SD = 0.47; t-Test: p < 0.001, df = 23). The warm period observed during the 1990’s may partially explain the increase in sighting rates and diversity of species observed at the census site compared to the much cooler temperatures of the 1970’s.

Seabed classification for trawlability determined with a multibeam echo sounder on Snakehead Bank in the Gulf of Alaska

Rockfishes (Sebastes spp.) tend to aggregate near rocky, cobble, or generally rugged areas that are difficult to survey with bottom trawls, and evidence indicates that assemblages of rockfish species may differ between areas accessible to trawling and those areas that are not. Consequently, it is important to determine grounds that are trawlable or untrawlable so that the areas where trawl survey results should be applied are accurately identified. To this end, we used multibeam echosounder data to generate metrics that describe the seafloor: backscatter strength at normal and oblique incidence angles, the variation of the angle-dependent backscatter strength within 10° of normal incidence, the scintillation of the acoustic intensity scattered from the seafloor, and the seafloor rugosity. We used these metrics to develop a binary classification scheme to estimate where the seafloor is expected to be trawlable. The multibeam echosounder data were verified through analyses of video and still images collected with a stereo drop camera and a remotely operated vehicle in a study at Snakehead Bank, ~100 km south of Kodiak Island in the Gulf of Alaska. Comparisons of different combinations of metrics derived from the multibeam data indicated that the oblique-incidence backscatter strength was the most accurate estimator of trawlability at Snakehead Bank and that the addition of other metrics provided only marginal improvements. If successful on a wider scale in the Gulf of Alaska, this acoustic remote-sensing technique, or a similar one, could help improve the accuracy of rockfish stock assessments.