47 resultados para Application techniques
em Aquatic Commons
Resumo:
After several years of surveys on the Kainji Lake fisheries activities by the Nigerian German Kainji Lake Fish promotion Project (KLFPP) trends regarding catches, yield and other parameter begin to emerge. However, it became obvious that some of the data were not quite as accurate as they were believed to be. Looking at the different editions of the statistical bulletin of Kainji Lake, concerning one given fisheries parameter, sometimes it is possible to reveal inconsistencies and unexplained trends. As compared to the survey method, PRA is primarily for analysis of differences in local phenomenon and processes. Therefore, PRA was used as a complementary tool to enhance the knowledge on issues like fisher women, entrepreneurs, gear ownership structure, mode of operation by owners of large gear number, preference in the use of twine and nylon gill nets, and reasons for misinformation on the number of fishing equipment owned by entrepreneurs, which cannot be done with frame survey. PRA techniques like timeline, mapping, seasonal calendar, transect walk and key informant interviews were utilized in the study process
Resumo:
Proper release of marine fishes has become increasingly important to anglers. The use of fisheries management tools such as size limits, bag limits and closed seasons as well as stronger conservation ethics have resulted in more and more fish being released. In order to maintain healthy fish populations, each angler is responsible for fishing legally, carefully handling fish that are hooked and releasing fish that are not harvested so they can spawn or perhaps be caught again. (PDF contains 4 pages.)
Resumo:
The goal of this study was to test a technology that may help ensure a reliable and consistent supply of high quality and inexpensive clam seed to growers, thus fostering an emerging aquaculture industry by eliminating a seed shortage that limits sustainability. The overall objectives were to develop, test and demonstrate technical procedures and determine the financial feasibility of transferring remote setting technology from the Pacific Northwest molluscan shellfish industry to the hard clam aquaculture industry in Florida. (PDF has 44 pages.)
Resumo:
The mapping and geospatial analysis of benthic environments are multidisciplinary tasks that have become more accessible in recent years because of advances in technology and cost reductions in survey systems. The complex relationships that exist among physical, biological, and chemical seafloor components require advanced, integrated analysis techniques to enable scientists and others to visualize patterns and, in so doing, allow inferences to be made about benthic processes. Effective mapping, analysis, and visualization of marine habitats are particularly important because the subtidal seafloor environment is not readily viewed directly by eye. Research in benthic environments relies heavily, therefore, on remote sensing techniques to collect effective data. Because many benthic scientists are not mapping professionals, they may not adequately consider the links between data collection, data analysis, and data visualization. Projects often start with clear goals, but may be hampered by the technical details and skills required for maintaining data quality through the entire process from collection through analysis and presentation. The lack of technical understanding of the entire data handling process can represent a significant impediment to success. While many benthic mapping efforts have detailed their methodology as it relates to the overall scientific goals of a project, only a few published papers and reports focus on the analysis and visualization components (Paton et al. 1997, Weihe et al. 1999, Basu and Saxena 1999, Bruce et al. 1997). In particular, the benthic mapping literature often briefly describes data collection and analysis methods, but fails to provide sufficiently detailed explanation of particular analysis techniques or display methodologies so that others can employ them. In general, such techniques are in large part guided by the data acquisition methods, which can include both aerial and water-based remote sensing methods to map the seafloor without physical disturbance, as well as physical sampling methodologies (e.g., grab or core sampling). The terms benthic mapping and benthic habitat mapping are often used synonymously to describe seafloor mapping conducted for the purpose of benthic habitat identification. There is a subtle yet important difference, however, between general benthic mapping and benthic habitat mapping. The distinction is important because it dictates the sequential analysis and visualization techniques that are employed following data collection. In this paper general seafloor mapping for identification of regional geologic features and morphology is defined as benthic mapping. Benthic habitat mapping incorporates the regional scale geologic information but also includes higher resolution surveys and analysis of biological communities to identify the biological habitats. In addition, this paper adopts the definition of habitats established by Kostylev et al. (2001) as a “spatially defined area where the physical, chemical, and biological environment is distinctly different from the surrounding environment.” (PDF contains 31 pages)
Resumo:
The need to develop techniques that can make the male grow faster in many species of fish as well as the female in some other species cannot be over-emphasized. Monosex culture of the faster growing sex can increase production if the method is reliable. The use of such techniques as manual sexing, sterilisation, hybridization, gynogenesis, androgenesis polyploidy and sex-reversal can provide solutions or partial solutions to the problems associated with sexual difference, sexual maturation and unwanted reproduction
Resumo:
This report gives the details of water sampling methods and chemical analyses used during MLML participation in the EOS MODIS investigations. It is intended to be used as a reference manual for those engaged in shipboard work. (PDF contains 50 pages)
Resumo:
The advent of molecular biology has had a dramatic impact on all aspects of biology, not least applied microbial ecology. Microbiological testing of water has traditionally depended largely on culture techniques. Growing understanding that only a small proportion of microbial species are culturable, and that many microorganisms may attain a viable but non-culturable state, has promoted the development of novel approaches to monitoring pathogens in the environment. This has been paralleled by an increased awareness of the surprising genetic diversity of natural microbial populations. By targeting gene sequences that are specific for particular microorganisms, for example genes that encode diagnostic enzymes, or species-specific domains of conserved genes such as 16S ribosomal RNA coding sequences (rrn genes), the problems of culture can be avoided. Technical developments, notably in the area of in vitro amplification of DNA using the polymerase chain reaction (PCR), now permit routine detection and identification of specific microorganisms, even when present in very low numbers. Although the techniques of molecular biology have provided some very powerful tools for environmental microbiology, it should not be forgotten that these have their own drawbacks and biases in sampling. For example, molecular techniques are dependent on efficient lysis and recovery of nucleic acids from both vegetative forms and spores of microbial species that may differ radically when growing in the laboratory compared with the natural environment. Furthermore, PCR amplification can introduce its own bias depending on the nature of the oligonucleotide primers utilised. However, despite these potential caveats, it seems likely that a molecular biological approach, particularly with its potential for automation, will provide the mainstay of diagnostic technology for the foreseeable future.
Resumo:
The effectiveness of 2 mark and recapture techniques was evaluated using tiger fish, Hydrocynus vittatus. The 2 techniques used were: tagging with a plastic tag and fluorescent spray marking. While the tagging method resulted as the logical method to use within the constraints of the tiger fish study, it cannot be considered completely reliable for the estimation of population size in Lake Kariba.
Resumo:
The study began on the 7th January 1991 and was completed in June 1991. Two reports have been produced. This report published as R&D Note 33 describes NRA tracking studies, tracking techniques and fish counter technology. The second report published as R&D Note 34 evaluates NRA tracking studies and recommends future research. The latter will be used solely for NRA management purposes. This report briefly outlines the programme of the NRA, placing the Fisheries programme in the context of the work of the NRA as a whole, and viewing the tracking work against the broader requirements of the NRA Fisheries research programme. Two techniques currently exist for studying the detailed timing and extent of movements of adult salmon: tracking of individually identifiable fish, and counting the numbers of fish moving past a fixed point in the river. Further details of these techniques and their development are given in Sections 2 and 3. Section 4 summarises and assesses completed and current NRA tracking Studies. Complete project descriptions for the studies are contained in Appendix A. Section 5 discusses the scientific content of these studies in relation to similar work carried out elsewhere in the UK. Section 6 details the future development of tracking techniques. Tracking work on migratory salmonids has tended to concentrate largely upon the movements of adult salmon. Much of this report will therefore be concerned with salmon tracking studies. NRA studies involving sea trout are referred to where appropriate. The methodological problems of sea trout tracking studies are summarised in Section 2.1.3.
Resumo:
Dissection can provide unique information on the physiology, biology and ecology of organisms. This document describes protocols for dissecting lionfish (Pterois volitans and P. miles). Protocols were developed to provide guidance to trained research personnel. Lionfish are native to the Indo-Pacific, but have become established in marine habitats within the Western Atlantic, Gulf of Mexico and Caribbean. The protocols described within this document were designed to help standardize handling and dissection methodologies for these species, with the goal of improving the coordination of research (e.g., Lionfish Tissue Repository; Appendix V). We focus on dissection methods, which yield data that contribute to our understanding of lionfish biology and ecology. By pairing dissection information with environmental and biotic data, researchers and managers can better understand lionfish population structure and dynamics, age and growth, reproductive biology, and food web ecology on various temporal and spatial scales.
Resumo:
We evaluated measures of bioelectrical impedance analysis (BIA) and Fulton’s condition factor (K) as potential nonlethal indices for detecting short-term changes in nutritional condition of postsmolt Atlantic salmon (Salmo salar). Fish reared in the laboratory for 27 days were fed, fasted, or fasted and then refed. Growth rates and proximate body composition (protein, fat, water) were measured in each fish to evaluate nutritional status and condition. Growth rates of fish responded rapidly to the absence or reintroduction of food, whereas body composition (% wet weight) remained relatively stable owing to isometric growth in fed fish and little loss of body constituents in fasted fish, resulting in nonsignificant differences in body composition among feeding treatments. The utility of BIA and Fulton’s K as condition indices requires differences in body composition. In our study, BIA measures were not significantly different among the three feeding treatments, and only on the final day of sampling was K of fasted vs. fed fish significantly different. BIA measures were correlated with body composition content; however, wet weight was a better predictor of body composition on both a content and concentration (% wet weight) basis. Because fish were growing isometrically, neither BIA nor K was well correlated with growth rate. For immature fish, where growth rate, rather than energy reserves, is a more important indicator of fish condition, a nonlethal index that reflects shortterm changes in growth rate or the potential for growth would be more suitable as a condition index than either BIA measures or Fulton�
Resumo:
Multibeam sonar mapping techniques provide detailed benthic habitat information that can be combined with the data on species-specific habitat preferences to provide highly accurate calculations of populations in a particular area. The amount of suitable habitat available for the endangered white abalone (Haliotis sorenseni) was quantified to aid in obtaining an accurate estimate of the number of remaining individuals at two offshore banks and one island site off the coast of southern California. Habitat was mapped by using multibeam sonar survey techniques and categorized by using rugosity and topographic position analysis. Abalone densities were evaluated by using a remotely operated vehicle and video transect methods. The total amount of suitable habitat at these three sites was far greater than that previously estimated. Therefore, although present estimates of white abalone densities are several orders of magnitude lower than historic estimates, the total population is likely larger than previously reported because of the additional amount of habitat surveyed in this study.
Resumo:
A discussion is presented on endocrine sex reversal and chromosome manipulation techniques for producing 1005 male tilapia. Details are given of methods for the administration of steroids and the induction of ploidy.
Resumo:
The high demand for the stinging catfish (Heteropneustes fossilis) and declining wild stocks led the Centre for Aquaculture Research and Extension of India to look for methods for the culture of the species. This paper presents a low-cost, simple breeding technique developed and tested by the Centre that can be easily adopted by rural farmers.