Technological status and development prospects of small-scale fishing crafts in Nigerian coastal water

A study of fishing crafts was conducted in some coastal states of Nigeria to elucidate findings on the existing crafts as the baseline for further developments. Based on the technical designs, three types of fishing crafts were identified; planked, dug-out and half dug-out canoes. The planked canoes have the largest cubic number and dug-out canoes the least. At loadwater line, the ratio of freeboard to draft was 2 : 1 for planked canoes, indicating reserved buoyancy. Trim of planked canoe is by stern; the beam-length ratio for dug-out canoes showed high drag. Most of the sea-going canoes have U-shaped bottom hull profile capable of withstanding the rigours of surf landing and displayed good stability against longitudinal water wave. Gunwale and thwarts provided respectively the longitudinal and transverse strength of planked and half dug-out canoes. With its characteristics 'weight low down' construction, planked canoe represent the climax of small scale fishing crafts developments in Nigerian coastal waters. It's only draw back is durability. Further improvement in this canoe should be aimed at increasing the hull size and stiffness, water tightness of deck by coating, caulking, fastening, increasing level of motorization and installation of deck working equipments. Experimental design and use of fibre glass, aluminium and ferrocement hulls, together with improved planked canoe is highly advocated

Comparative efficiencies of mechanized fishing crafts introduced in India

India started mechanization of fishing craft in early 1950. The traditional craft was subjected to technical scrutiny and some of them mechanized with good results. However, due to limitations inherent in the traditional craft, it was found necessary to develop new series of crafts suitable for the operation of modern fishing gears in areas hitherto unexplored. The impetus given to the development of infrastructure like freezing, canning and ice plants, and quickly expanding export market, increased the demand for marine products, hence craft for immediate, as well as long-term needs had to be introduced. In this article the author discusses design of fishing vessels, information from experience used in development of vessels, designs of distant water vessels, productivity studies, income and expenditure, economic values, production cost, and productivity.

Photographic database development of Nigerian fisheries: a complementary source of information documentation

The paper traces the history of the different documentation media used for information dissemination. Such early media are clay tablets, papyrus, and vellum or parchment codex. The invention of printing however revolutionized the information industry, enabling the production of books in multiple copies. Photography came into documentation mainly to preserve rare materials and those that easily deteriorate. This paper reports the efforts of National Institute for Freshwater Fisheries Research (NIFFR) and Kainji Lake Fisheries Promotion Project (KLFPPP), Nigeria, to develop an Object Oriented Database (OOD) using photographs. The photographs are stored in digitized form on commercial computers, using the program ACDSee 32 for classification, description and retrieval. Specifically the paper focuses on photographs in fisheries as visual communication and expression. Presently, the database contains photo documents about the following aspects of Kainji Lake fisheries: fishing gears and crafts, fish preservation methods

Incidence of mayfly (Povilla sp.) infestation of wooden infrastructures of artisanal fishers in the lagoon and marine fisheries locations of Ogun State, Nigeria

A diagnostic survey of the incidence of mayfly (Povilla sp.) infestation of wooden infrastructures of the artisanal fishers in ten (10) lagoons and marine fishing villages of Ogun States (Nigeria) was carried out through the application of structured questionnaire and participatory Rural Appraisal interviews. The demographic, infrastructural and socioeconomic characteristics of the ten fishing villages sampled were derived and analyzed. The infestation which occurs all year round is found to be most prevalent (70%) in the wet season, increasing proportionally with salinity from 56% (brackish water); to 63% (marine water). The life-span of Povilla sp. is reduced from 55% to 62% (freshwater); 41% (brackish water) and 38% (marine water). Annual financial loss of N10,000.00 per fisher or N80,000,000.00 to the 8000 artisanal fishers affected in Ogun State is discussed. It is recommended that fishers should preferably use non-wood crafts and infrastructures while adopting appropriate management strategies for containing the existing infestation

Marketing of fishing gear materials and fishing gear making in parts of Kainji Lake basin

The importance of fishing gear in fishing cannot be over-emphasized; as without it fish cannot be obtained. The method used to catch fish affects the condition in which the product is landed. This means that a bad-catching method would produced bad fish to the consumer. To achieve the goal of self-sufficiency in fish production in Nigeria, there is need to address the lingering problems of fishing gear and craft technology, especially in terms of availability of materials and their cost. The sale and making of fishing gear materials are two areas of fisheries, which are yet to be exploited by the general public as forms of businesses for livelihood. The study is conducted in villages around the lower part of Kainji Lake, towards the dam, including New Bussa. It reveals that only the fishermen themselves are involved in making their own fishing gears while those involved in the selling of fishing gear materials like the sheet netting, ropes, twines, floats, sinkers etc are business men and women who may not have any experience of fishing. Also considered in the study is the art of making fishing crafts like the canoe and gourd. Very few entrepreneurs are involved and they are so skilled that each is specialized in the making of only one kind of craft or gear

Management of inland capture fisheries and challenges in fish production in Nigeria

The paper critically examines the trend in fish production in Nigeria. The problem of excessive mismanagement and lack of attention by relevant agencies are still common place in inland water bodies. The paper discusses these mismanagement practices which are non compliance with the existing rules and regulations on good fishing methods, uncontrollable, unorthodox and obnoxious fishing practices, destruction of the natural breeding grounds and the collapse of the fishery due to massive over fishing. The challenges posed by the fishing methods as well as the effect of different gears and mechanization of fishing crafts on fish production are discussed. The paper recommends ways to increase domestic fish production in inland water bodies, which include a well planned strategy of restocking the existing reservoirs after careful scientific study, enforcement of the existing laws and regulation based on community participation. Training of stakeholders on the code of practice for responsible fisheries (CPRF), extension of subsidies to fisher folks, the traditional practices, which encourage the adherence to close season and other fish conservation and utilization strategies, are also advocated

Pesca experimental de atum com "long line" na ZEE moçambicana

Results of the analysis of statistical data gathered aboard 2 crafts licensed for experimental commercial tuna fishing with long-line in the EEZ of Mozambique are presented.

Pesca experimental no banco de S. Làzaro

Experimental fishing at S. Lazaro Bank, Mozambique is reported, during which stocks of pelagic and big demersal species as well as the most suitable gears and crafts for their commercial fishing were studied.

Standardisation and mass production of shrimp trawlers and other fishing boats in India

This paper deals with the existing fishing crafts, new vessel types, boat building programmes, their standardisation and mass-production in India.

Transportation of fish in India: problems and prospects

India has a long coast line of about 4,800 km along which fish landing centers are scattered. Fish catches are showing an upward trend consequent on rapid mechanization of fishing crafts. Economic utilization of the landed fish is an essential prerequisite for the proper development of Indian fishing and fish processing industries.

Report of the Frame Survey of Lake Albert conducted in May 2012

Lake Albert and Albert Nile are a major source of fisheries resources sustaining the riparian communities in Uganda and the Democratic Republic of Congo (DRC). Like all shared bodies of Uganda Lake Albert and Albert Nile fisheries are faced with immense exploitation pressure one time described as the tragedy of the commons. In Uganda, the lake is shared by five riparian districts namely: Buliisa, Bundibugyo, Hoima, Kibaale and Nebbi. The lake covers a total estimated surface area of 5,270 square kilometers with approximately 60% within Ugandan waters. It is located in the western part of the great rift-valley at an altitude of 618 m above Sea level. The central parts of the lake are characterized by steep escarpments whereas the northern and southern parts lie in a plain of the rift valley. The plains are gently sloping, resulting in shallow swampy inshore waters in many places. The major inflowing rivers are the Semliki and Kafu in the south, and the Victoria Nile at the northern tip. The lake has a diverse fish fauna with a gradient of multi-species fisheries in different parts of the lake. The overall objective of the Frame Survey was to provide information on the facilities and services at landing sites and the composition, magnitude and distribution of fishing effort to guide development and management of the fisheries resources of Lake Albert and Albert Nile. The specific objectives were to provide information on: a) The number of fish landing sites; b) The facilities available at the fish landing sites to service the sector including accessibility; c) The service providers especially fisheries staff at fish landing sites; d) The number of fishers; e) The number and types of fishing crafts and their mode of propulsion; f) The number, types and sizes of fishing gears used on the lake and their mode of operation.

Report of Catch Assessment Survey of Lake Albert – Albert Nile conducted in July 2012

A Catch Assessment Surveys (CAS) with the overall objective of generating information on the fish production and commercial value of the fisheries of Lake Albert and Albert Nile system was implemented by the National Fisheries Resources Research Institute (NAFIRRI) in collaboration with the Department of Fisheries Resources (DFR), Local Government staff (FOs) and BMU members at selected landing sites on Lake Albert (12 landing sites) and Albert Nile (26 landing sites) in July 2012. A total 622 and 313 boat days on Lake Albert and Albert Nile respectively were sampled for a period of 9 days. Results indicate an annual landing of 151,600 and 5,900 tonnes (t) of fish with an estimated beach value of 122.5 and 14 Billion (UShs) from Lake Albert and Albert Nile respectively. Over 80% of the catch from Lake Albert comprised the small pelagic species; Neobola bredoi (Muziri) and Brycinus nurse (Ragoogi) followed by Nile perch (6%). However, due to low market value of the small fishes and the high prices attached to Nile perch for industrial processing and export market, the contribution of the latter to beach value rose to 34% of the total. The contribution of the light fishery based on small pelagic species (B. nurse and N. bredoi) are insignificant on Albert Nile. Even if the small pelagic species may be present in the river system, a light fishery based on these two is yet to be developed. Proportionally, Albert Nile still remain a multispecies fishery with over 20 fish species harvested commercially. Interestingly, the Albert Nile fishery still remains primitive with simple crafts and gears (mainly dugout canoes, traps, and gillnets). This could suggest that the more developed the system becomes the higher the level of transformation in its fisheries leading to simplification, characterized by reduction in multispecies nature and dominance of few species. Illegal gears especially undersized gillnet of mesh size less than 4 inches were the most dominant in the Lake Albert and Albert Nile fisheries. They captured large quantities of immature fish particularly when used to target Nile perch, Bagrus, Nile tilapia, and large Barbus spp. Their impact when used to target the smaller species (Ragoogi, Angara & Ngasia) is yet to be evaluated. A specific study to analyze selectivity and impacts of these nets is a recommended. However, the dominance of 1.5” mesh sizes especially on Albert Nile to target Angara, Ngassia and Barbus, is definitely destructive to their fisheries and should be checked forthwith. In addition, there is an emerging fishing method locally referred to as “Salsio or Luzira” whereby fishers stay on the lake from 3 days up to 2 weeks without returning to the landing site. They carry with them food and salt for processing the catches on the lake, and in the case of Albert Nile on make shift shelters on islands and in the game park. They normally use gillnets of 3-3½ inch mesh size and caught mainly Nile perch & Bagrus (Pethi & Munama). On return they land several tons of fish. Most of these Catches are not captured in the estimates presented in our analyses since we target daily fishing boats. The possible impacts of this fishing method should be studied and appropriate action recommended.

Coastal fisheries

The coastal zone of Sri Lanka is the most important area of fish production at present. This coastal zone is limited seawards to the edge of our relatively narrow continental shelf. The fishing methods employed are such that only a fraction of the shelf area is exploited. The extent to which the coastal zone is exploited depends on the craft and gear used in the fishing operations. The non-mechanized traditional crafts such as the teppams and orus generally operate within about five miles from shore. The mechanized traditional crafts and the small mechanized boats introduced around 1957 carry out fishing operations up to the continental shelf or beyond. The gear used by these fishing crafts is determined by the habits of the type of fish to be caught, the nature of the sea bed and other related conditions. For the pelagic fishes they use trolling lines or float long lines or drift nets. For the demersal fishes hand lines, bottom long lines, bottom set nets or drag nets are used. However, the net is the preferred fishing gear. The beach seines or madels, the traditional crafts such as orus, teppams and vallams and the small mechanized boats are the important contributors in the coastal fishery. Of these the madels are considered the most important since a high percentage (25-35%) of the Island's landings are produced by the operation of these nets.

National report of the frame survey 2010 on the Uganda side of Lake Victoria

This is a report on the results of the Frame Survey conducted in the Uganda side of Lake Victoria during August 2010 by the LVFO Institutions, namely: the Department of Fisheries Resources (DFR) Uganda and the National Fisheries Resources Research Institute (NaFIRRI) in close collaboration with the District Fisheries offices of Busia, Bugiri, Mayuge, Jinja, Mukono, Kampala, Wakiso, Mpigi, Masaka, Kalangala and Rakai. The authors are grateful to the LVEMP II, for providing funds for the survey and the LVFO secretariat coordination. Fisheries Frame surveys have been carried out on Lake Victoria biannually since 2000 to determine the number of fishers, fish landing sites, and facilities at the landing sites, as well as the composition of fishing crafts, their mode of propulsion, fishing gears and the fish species they target. This information is used to guide development and management of the lake’s fisheries. Following the reorganisation of landing sites into Beach Management Units (BMUs), the number of landing sites decreased from 597 in 2000 to 435 in 2008. The survey in 2010 showed an increase to 503 landing sites, an indication that new landing sites are coming up. The fish landing sites continue to have inadequate facilities such as fish shades, cold rooms to service the fisheries industry and very few (5%) have access to electricity and 32% had access to all weather roads. There has been some progressive improvement in the landing site coverage of basic hygiene and sanitation facilities, especially public toilet facilities from 17% in 2000 to 39% in 2010; and portable water from 4% to 17% respectively. However more effort is required to cover all landing sites. Most landing sites (83%) have access to mobile phone networks which eases communication. 46% of landing sites had access to a Health clinic and 64% had a Primary school within a radius of 2 km.

Estimating the population density of prawns by the use of catch per effort data from prawn trawlers at Chilaw

The penaeid prawns of Sri Lanka from estuaries and sea are an important commercial fishery resource. This resource has been exploited over the last century or more by local fishermen using indigenous fishing gear from locally sail-driven or oar-driven fishing crafts. In more recent times, the Fisheries Research Division of the Department of Fisheries undertook surveys of the seas and lagoons of Sri Lanka with a view to ascertain whether any unexploited resources of prawns existed. These publications deal with the species composition, biology, distribution and abundance in the lagoons and inshore waters of Sri Lanka.