Quantitative and qualitative studies on the bacterial flora of fresh sardines

Plate counts at R T and 8 C on the skin with muscle and the gut contents of absolutely fresh sardines (Sardinella longiceps) caught off Cochin showed a seasonal variation when sampling was done over a period of 12 months. The counts of the gut contents ran parallel with those of the skin with muscle, but at a higher level of magnitude. Qualitatively, the analysis of 360 strains of bacteria isolated from the skin with muscle and 100 strains from the guts during a year's study revealed a very high preponderance of Gram negative rods, mainly of Achromobacter, Vibrio, and Pseudomonas groups. The percentage of Gram positive organism was very low or nil at times in the ocean fresh sardines.

Experiments on preservation and weathering of net twines

Koura (1963) reporting the results of the comparative studies on different preservation methods of cotton twines stated that "by the difference of rotting in the different waters, not ever one method may be the most economical one". The observations were simultaneously made at Alexandria in Egypt in the sub-tropical region and Cuxhaven in the estuary of the River Elbe in the temperate zone. The course of weathering and effect of immersion in water of man-made fibres have also been mentioned in this communication. Subsequently work on similar lines were extended to Cochin in the tropical region with Cuxhaven and Hamburg as the other places of observation and the results of these studies are presented in this paper.

Dietary cholesterol requirement of larvae and postlarvae of the prawn Penaeus indicus (H. Milne Edwards)

Two sets of experiments were conducted to determine the dietary cholesterol requirement of larvae and postlarvae 1-10 of Penaeus indicus. Seven approximately isocaloric and isonitrogenous purified experimental diets were tried with graded levels of cholesterol ranging from 0 to 4%. The control feed for larvae and postlarvae 1-10 were phytoplankton and compounded feed NPCL-17, developed by CMFRI, Cochin respectively. Result of these experiments indicates that cholesterol is an essential nutrient in the diet of larvae and postlarvae 1-10. Survival and growth of larvae and postlarvae 1-10 were greatly affected by cholesterol deficiency in the diet. The optimal cholesterol requirement for larvae appeared to be 0.5% of the diet, while it was higher for postlarvae where inclusion of cholesterol at a level of 2% in the diet gave higher growth.

Vertical temperature structure of 250 m. water layer around Sri Lanka at the tail-end of the north-east monsoon

Data collected during cruises of the Hoyo Maru in Jan-Mar 1975 are analysed. Data is tabulated to show vertical temp profile, surface water temp and temp gradient. Each of these features is discussed. Thermoclines are shown to be established off the coast of India, their depth varying according to time of year. Upwelling off the Cochin coast is discussed. This occurs during Oct-Nov. Surface temp is considerably influenced by the north-east monsoon. The 'clockwise current' (or 'transparent current) characterised by high salinity, high transparency, and rich nutrient conchs, and which prevails in Jan-May brings oceanic water into the Bay of Bengal and sweeps along the Ceylon coast.

Parallel twin-body trawl for shrimps, its design and efficiency

Comparative studies with a new 17 m parallel twin-body trawl and a 17 m bulged belly trawl conducted off Cochin during 1974-77 are reported. The parallel twin body trawl showed an increase of 28% in catch over that of bulged belly with a break up of 39.9% and 23.1 % for prawns and fishes respectively. The increase in catch is attributed to the extra wide mouth opening (26.6 %) of the parallel twin-body trawl. Parallel twin-body trawl had 8.96% lesser resistance which resulted in lower utilization of horse power.

Estimation of fishery resources by sonar surveys

The methodology adopted by the Pelagic Fishery Project, Cochin for surveying the surface fish schools with sonar equipment, is described. The estimates of the biomass arrived at from the surveys conducted during 1975-78 are presented.

Experiments with fibre-glass sheathing as a protection against marine wood-boring organisms

Wooden test panels of different species of wood sheathed with fibre-glass reinforced plastic were subjected to immersion tests along with corresponding controls in Cochin Port area and the effect of the protective coating studied.

Bacteriological investigations of prawn canneries 1. Incidence of aerobic sporeformers

A detailed bacteriological survey of the prawn canneries of Cochin area was carried out to study the nature and type of micro-organisms present in the factory environs and their role in causing contamination of the canned products. About 26% of the total of 1030 strains isolated was found to be gram positive spore-formers of the Bacillus type, the cooling water being their major source. Similar types of organisms formed the major group often met with in defective canned prawn samples picked up from the factories for examination, thus establishing a correlation between bacterial characteristics and load of cooling water and can contamination.

Some bacteria isolated from marine plankton and mud

57 bacterial strains isolated from marine plankton and mud from the inshore waters of Cochin, are described. The flora of the plankton was dominated by chromogens while mud sample and failed to produce chromogens. The different strains are divided into five arbitrary groups for the convenience of description. The flora is similar to that of Mandapam (east coast) while it differed from the flora of Calicut (west coast) in the paucity of Bacillus and other spore formers.

Studies on arsenical creosote as a wood preservative for marine structures. Part 2. Observation on leaching, corrosion and resistance to borer attack

A detailed study on arsenical creosote with reference to leaching, corrosion and anti-borer properties was carried out. Results showed that aging had very little effect on the preservative which suggested better fixation of the preservative into the wood. Corrosion of mild steel, galvanised iron, aluminium-magnesium alloy (M57S) and copper panels in the preservative was found to be negligible. Normal creosote and low temperature creosote of Regional Research Laboratory, Hyderabad, both fortified with arsenic trioxide resisted borer damage on wooden panels for a period of over five months in the port of Cochin. The performance of low temperature creosote fortified with arsenic was found to be equally satisfactory when compared to normal creosote fortified in the same manner. A loading of 208.6 Kgs/ml³ for Haldu (Adina cordifolia) and 138 Kgs/m³ for Mango (Mangifera indica) in the case of normal creosote and 177 Kgs/m³ for Mango the case of RRL creosote were found to be sufficient for treating the wood.

Bacteriological investigations of prawn canneries 2. Incidence of Clostridium perfringens

Prawn processing factories of the three major fish processing centres of the West Coast of India, viz., Cochin, Mangalore and Calicut were surveyed to determine the occurrence of Clostridium perfringens in processing areas, and in processed products. Direct plating on Sulphite-polymyxin- sulphadiazine Agar and enrichment techniques were used. Samples of prawn, prawn guts, frozen prawns, canned prawns, water, ice, swab from utensils and soil from the factory premises were examined. Among a total of 461 samples examined, only 32 (6.9%) gave positive results. The incidence of C. perfringens was more in prawn guts (80%), followed by soil (50%), prawn (38%), ice (33.3%), frozen prawns (11%), swab (5.0%) and water (1.1%). No C. perfringens was isolated from canned prawns.

A case history on the phenomenal corrosion of marine propellers in fishing boats

Although high tensile brassess of copper-zinc alloys (Manganese bronze) find extensive use in all marine applications, under aggressive sea-water, marine propellers cast out of such an alloy frequently suffer heavy corrosion damages due to dezincification. An interesting case history where a number of propellers have undergone dezincification in the Cochin backwaters is narrated in this paper.

On the design, operation and efficiency of 11 m dual purpose trawl for small machanised [i.e. mechanised] boats

Preliminary midwater fishing trials were conducted off Cochin with an 11m dual purpose trawl during the monsoon months when the prawns were available in the column layers. Further, with a view to assess its suitability as bottom trawl, the gear with suitable modifications in the rigging was towed in comparison with a 15m bottom trawl along the depth ranges of 5-10m and 10-20m and the fishing operations were found satisfactory.

Cathodic protection of the hulls of fishing trawlers in India

Nearly 10,000 mechanised fishing trawlers mostly built of wood and about 100 trawlers built of steel besides a few fiberglass reinforced plastic and a couple of ferro-cement boats constitute the modern fishing fleet of India at present. Metallic corrosion in sea water is a very well-known phenomenon in all ships and various other marine structures; the exact financial loss and the material breakdowns have never been fully realized among the trawler owners in India. The Central Institute of Fisheries Technology at Cochin has been studying these problems for some years and has been able to assess the significance of underwater corrosion particularly of the hull below water line in the trawlers and suitable remedial measures have been suggested in this paper.

Selectivity of gill nets for Scomberomorus commersoni

Selectivity of gill nets for S. commersoni was studied with nets made of 4 different mesh sizes fabricated with 4 different specifications of nylon twines. Fishing operations were conducted off Cochin through the fishing seasons 1968-72. The commercially significant size group of S. commersoni was found to fall in the length range of 850-950 mm. The optimum mesh size required for the capture of this group of S. commersoni was estimated as 76 mm. bar in nylon twine 210/12/3. The relationship between the twine size and mesh size was also worked out.