Survey of reproductive physiology on Epinephelus coioides in Khozestan province, Persian Gulf

Epinephelus coioides (family serranidae) is protogynous. This species is one of the most important fishes in food chain of marine proteins of persian Gulf. Therefore knowing about the reproductive biology and physiology of this species is an important role on aquaculture procedures. Monthly samples of Epinephelus coioides were obtained in khozestan Bahrekan province from 2001 to 2002 for annual variation of base line of reproductive hormone. The hormones such as: 17-B estradiol, Testosteron, Progesterone, Gonadotropin I ,II GTHI, II) and cortisol have assayed and also different stages of gonads from the histological point of view were studied by light and electron microscope. Aditional to morphometric and fecundity measurements, the important factors such as : Gonadosomatic index (GSI) Hepatosomotic index (HSI) and Condition factor (KF) were also studied. Environmental factors such as temperature, salinity, photoperiod and pH were analyzed for the determination of effective factors responsible for the changes of reproductive cycles. The flactmation of estroid hormones and gonadotropines show a significant variation in different stages of maturation, e.g 17-B estradiol's concentration in the third stages, GTH II in fourth stages of sexual maturation or final oocyte maturation, plasma Testosteron in post ovulation and Progesterone during maturation indicates the highest levels of above mentioned hormones. The total calcium concentration was high in all year. calcium concentration was correlated with GTH II synthesis and increases with GTH II in June. 17-B estradiol concentration was also correlated with GSI. The high concentration of cortisol throughout the year was an index of stress and development of ovary maturational processes. This species was protogynous synchronous hermaphrodites , and belongs to annual spawning species, being monandric. The sexual transition was found to occure in individuals of 51.2- 105 cm in length. GSI and HSI level confirms the time of spawning period is in April- June. Electrone microscopic studies of gonad tissues showed some changes in mitochondria and endoplasmic reticulum in the post ovulation, maturation and post spawning periods. During the monthly sampling the biochemistry of tissues variations indicated decrease in protein and lipid content, but an increase in water content of spawning fishes which was correlated to the maturation of Epinephelus coioides . sex ratio indicative of higher frequences of females to males during monthly sampling periods. The females were smaller than males in sizes, therefore the females lived in 8-15m depth, but males were living in upper limits of depth. The results indicated that the temperature was the most effective parameter in reproductive cycle of Epinephelus coioides and the mean 24°c was a convenient temperature for spawning. Photoperiod was the second effective. factor on the reproductive cycle for this species. It seemed that the increase in the photoperiod between January to May caused a development of the oocyte. Regarding to the results of this research, it seems that the period of spawning in Epinephelus coioides is in May- June and the aquaculture procedure of Epinephelus coioides could be performed in the above mentioned periods.

Sequence stratigraphy and sea-level history of Kangan formation in south pars field

Dehram group includes Faraghan, Dalan and Kangan formations. Kangan formation ages lower terias. That is one of the important reservoir rocks of southern Iran and Persian Gulf. In this research Kangan formation is studied in two A and B wells. Based on 75 studies on thin section, four carbonate litho acies association A, B, C, D with 12 subfacies are identified. A lithofacies association includes 4 subfacies: A1, A2, A3 and A4. B lithofacies association consists of 3 subfacies: B1, B2 and B3. C lithofacies association consists of 3 subfacies: C1, C2, C3 and D lithofacies association includes 2 subfacies: D1 and D2. On the base of studies lithofacies association of Kangan formations are formed in 3 environments of: Tidal Flat, Lagoon and Barrier Shore Complex in a Carbonated Platform Ramp type. Diagenetic processes have effected this formation. The most important Diagenetic processes are: Cementation, Anhydritization, Micrization, Neomorphism, Bioturbation, Dissolution, Compaction, Dolomitization and Porosity. Sequence staratigraphy studies were performed base on the vertical and horizontal relationship of lithofacies association and well logging in gamma ray and sonic type that causes the identification of two sedimentary sequences: First sedimentary sequence includes: Transgressive System Tract (TST) and High Stand System Tract (HST). The lower boundary of this sequence is in Sequence Boundary 1 (SB1) which shows unconformities of Dalan and Kangan that are Permian-terias unconformities. The upper boundary is in Sequence Boundary 2 (SB2) type that is identified by carbonate facies associated by anhydrite nodular. Second sedimentary sequence includes: TST and HST. Lower and upper boundaries of these sequences are both in SB2 type. The lower and upper boundary is made of carbonate facies with anhydrite nodular.

STREAM country strategy paper: Cambodia

Cambodia is one of the poorest countries in the world; much of its population live in rural areas and many live below the local poverty line. The management of common property aquatic resources is of over-riding importance to food security and sustainable rural development in Cambodia. The key groups of poor people who use aquatic resources as part of their diverse livelihoods portfolios are subsistence fishers, small-scale aquaculture practitioners and aquatic resources collectors. Subsistence fishers access mainly the rivers, lakes and inundated forests in Tonle Sap provinces, the lower Mekong and Bassac regions and the upper part of the Mekong. Small-scale aquaculture and/or the collection of aquatic resources are most important in provinces that are not rich in fisheries resources including Kompong Speu, Ratnakiri, Mondulkiri, Preah Vihear and Ortdar Meanchey. Freshwater capture fisheries probably contribute more to national food security and the national economy in Cambodia than in any other country in the world. (19 p.)

Verringerung der Dorschbeifänge in der Schleppnetzfischerei auf Plattfische mit einem im Oberblatt reduziertem Grundschleppnetz

Trials with the “topless” version (with reduced upper panel) of the bottom trawl resulted in a 63 % reduction of cod bycatch in numbers, compared to the complete trawl. Flounder catches increased by 120 % on average. Further modification of the net opening height to optimize the trawl performance are underway.

Horizontale Trennblätter in Trawls zur Verringerung von Discards in der Ostsee

A primary objective of the Common Fishery Policy of the European Union is the reduction of discards and unwanted by-catches in the fishery. In principle this could be achieved if the catching methods were optimised for this. Still high numbers of undersized flatfish are caught in the bottom trawls. Although EU regulations make the use of the BACOMA codend mandatory in the Baltic Sea cod areable to escape through square mesh escape window of the BACOMA net the whereas flatfish still remain in the cod-end. Gear experiments have been carried out with the aim to better separate cod from the flatfish fraction already when entering the rear belly, making use of the natural behaviour of the fish, i. e. the preferred swimming distance from the bottom of the net in the funnel. As cod have a natural tendency to keep a relativly great distance from the bottom, flatfish tend to stay close to it. It was attempted to separate both fractions by splitting the funnel into an upper and lower part with a horizontal panel. This wastested for two different nets, a cod trawl to separate cod from flatfish, and an eel-trawl to separate cod and flatfish from eel. Cod and flatfish separation is best at a panel distance of 50 cm from the bottom. Thus, 74 % of the cod were found in the upper panel, whereas 75 % of the flounder were in the lower section. A separation of eel from cod was however not possible, since eel tend to rise to the upper part of the net, together with cod.

Erster Einsatz von Trenngittern in der kommerziellen Garnelenfischerei

Comparative fishing trials were conducted in the river Elbe estuary using 9 m commercial brown shrimp beam trawls. To avoid the bycatch of fish a metal sorting grid of the Nordmöre type was used. The elliptical grid was constructed of 6 mm stainless steel bar with a spacing of 20 mm between the bars and housed in a cylindrical frame of 800 mm diameter. It was installed in the extension piece just in front of the codend. The inclination of the grid was 45 degrees. A fish outlet was provided in the upper panel of the trawl at the upper edge of the grid. A series of 8 tows of 15 min duration at a towing speed of 3 kns was done. For evaluation the catch of the main codend was compared to the portion of the catch escaped through the grid. The presence of the grid caused a 97.4 % reduction of the catch of lump sucker, a 90.6 % reduction of the catch of sea scorpion, a 79.3 % reduction of the catch of cod, a 58.8 % reduction of the catch of armed bullhead, a 39.6 % reduction of the catch of dab, a 34.7 % reduction of the catch of flounder, a 32.3 % reduction of the catch of smelt, a 19.8 % reduction of the catch of plaice and a 14.5 % reduction of the catch of brown shrimp.

Sea-level rise in Hawaii: Implications for future shoreline locations and Hawaii coastal management

Management of coastal development in Hawaii is based on the location of the certified shoreline, which is representative of the upper limit of marine inundation within the last several years. Though the certified shoreline location is significantly more variable than long-term erosion indicators, its migration will still follow the coastline's general trend. The long-term migration of Hawaii’s coasts will be significantly controlled by rising sea level. However, land use decisions adjacent to the shoreline and the shape and nature of the nearshore environment are also important controls to coastal migration. Though each of the islands has experienced local sea-level rise over the course of the last century, there are still locations across the islands of Kauai, Oahu, and Maui, which show long- term accretion or anomalously high erosion rates relative to their regions. As a result, engineering rules of thumb such as the Brunn rule do not always predict coastal migration and beach profile equilibrium in Hawaii. With coastlines facing all points of the compass rose, anthropogenic alteration of the coasts, complex coastal environments such as coral reefs, and the limited capacity to predict coastal change, Hawaii will require a more robust suite of proactive coastal management policies to weather future changes to its coastline. Continuing to use the current certified shoreline, adopting more stringent coastal setback rules similar to Kauai County, adding realistic sea-level rise components for all types of coastal planning, and developing regional beach management plans are some of the recommended adaptation strategies for Hawaii. (PDF contains 4 pages)

Studies on heterotrophic nitrification in a lake. [Translation from: Z.allg.Mikrobiol. 12 567-574, 1973. ]

In a lake the nitrogen compounds are liable to regular cycling in which nitrate is reduced and ammonium oxidised. As a nitrate maximum is regularly established in the upper part of the hypolimnion of a stratified summer lake, the authors have dealt in particular with the oxidising side of the nitrogen cycle. Described here are partial results of the nitrification in Plusssee. The Plusssee was chosen, since it is almost entirely without inflows, and, lying in a wooded basin, is well protected from the wind, and therefore stably stratified. In order to determine the number of autotrophic nitrificants the distribution of the Nitrosomonas and Nitrobacter spores in the lake were analysed. From the estimates on the determination of spore numbers of the heterotrophic nitrificants, 14 species in the pure culture were isolated and examined from morphological, biochemical and taxonomic viewpoints.

Design for Survival: Sustainability for Planet and Structure

Buildings in Port Aransas encounter drastic environmental challenges: the potential catastrophic storm surge and high winds from a hurricane, and daily conditions hostile to buildings, vehicles, and even most vegetation. Its location a few hundred feet from the Gulf of Mexico and near-tropical latitude expose buildings to continuous high humidity, winds laden with scouring sand and corrosive salt, and extremes of temperature and ultraviolet light. Building construction methods are able to address each of these, but doing so in a sustainable way creates significant challenges. The new research building at the Marine Science Institute has been designed and is being constructed to meet the demand for both survivability and sustainability. It is tracking towards formal certification as a LEED Gold structure while being robust and resistant to the harsh coastal environment. The effects of a hurricane are mitigated by elevating buildings and providing a windproof envelope. Ground-level enclosures are designed to be sacrificial and non-structural so they can wash or blow away without imposing damage on the upper portions of the building, and only non-critical functions and equipment will be supported within them. Design features that integrate survivability with sustainability include: orientation of building axis; integral shading from direct summer sunlight; light wells; photovoltaic arrays; collection of rainwater and air conditioning condensate for use in landscape irrigation; reduced impervious cover; xeriscaping and indigenous plants; recycling of waste heat from air conditioning systems; roofing system that reflects light and heat; long life, low maintenance stainless steel, high-tensile vinyl, hard-anodized aluminum and hot-dipped galvanized mountings throughout; chloride-resistant concrete; reduced visual impact; recycling of construction materials.