165 resultados para RESERVOIR


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Cow Green is a new reservoir situated in Pennine moorland. It has an area of 312 ha, a capacity of 40 . 9 x 10 SUP-6 m SUP-3 and a maximum depth of 22 . 8 m. The function of the reservoir is to regulate flow in the River Tees to provide industrial Teesside with sufficient water during the dry spells. Invertebrate studies were carried out in the Tees to monitor changes resulting from the construction of the reservoir both in the flooded basin and below the dam. The overall effect of the reservoir on the Tees has been to increase the numbers and biomass of certain taxa, but generally not at the expense of previous fauna. Some of the positive effects, ie. increase in number and biomass, and maintenance of faunal diversity, may in part be attributable to the presence of the rapids and waterfall. Turbulence resulting from this rapid flow over heterogeneous bottom is sufficient to prevent clogging of interstitial spaces by silt and to maintain the variety of ecological niches necessary for a diverse fauna.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Post impoundment observations on the fish populations of the River Tees, downstream from the Cow Green Reservoir were made between 1971 and 1980. Both bullhead (Cottus gobio L.) and brown trout (Salmo trutta L.) population densities increased in the river after impoundment but changes in growth rate were small. Investigations into the stomach contents of the two species reflects the results of other work on increases of benthos in the river. Following regulation there was an increase in the quantity of Ephemerella ignita found in trout stomachs while in the bullhead, regulation caused an increase in the importance of Mollusca and a decrease in importance of Ephemeroptera and Plecoptera.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Since 1989, intensive studies have been made on a relatively new (1983-84) oligotrophic reservoir and its pre-reservoir in the Black Forest. This paper briefly reports on the hydrochemistry, especially annual variations in phosphorus loadings, and the seasonal development of phytoplankton in 1989 and 1990.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Steady-state procedures, of their very nature, cannot deal with dynamic situations. Statistical models require extensive calibration, and predictions often have to be made for environmental conditions which are often outside the original calibration conditions. In addition, the calibration requirement makes them difficult to transfer to other lakes. To date, no computer programs have been developed which will successfully predict changes in species of algae. The obvious solution to these limitations is to apply our limnological knowledge to the problem and develop functional models, so reducing the requirement for such rigorous calibration. Reynolds has proposed a model, based on fundamental principles of algal response to environmental events, which has successfully recreated the maximum observed biomass, the timing of events and a fair simulation of the species succession in several lakes. A forerunner of this model was developed jointly with Welsh Water under contract to Messrs. Wallace Evans and Partners, for use in the Cardiff Bay Barrage study. In this paper the authors test a much developed form of this original model against a more complex data-set and, using a simple example, show how it can be applied as an aid in the choice of management strategy for the reduction of problems caused by eutrophication. Some further developments of the model are indicated.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Stocks Reservoir is situated amidst the Forest of Bowland in the upper reaches of the old river valley of the Hodder. The reservoir was built in 1927 for the Fylde Water Board who primarily supplied water to Blackpool. The objective of this study is to assess the degree and likelihood of fish ingress onto the fish plates at the present and proposed stocking densities. An additional aim is to evaluate the operational implications, and if necessary suggest methods of alleviating the problem. Three spheres of study have been undertaken to achieve these objectives, these being: 1. To selectively stock the reservoir and monitor the angling club catches in order to assess the total population, relating it to fish plate losses and proposed stocking densities. 2. To monitor the fish taken from the fish plates and assess the reasons for their ingress. 3. To study the draw off tower and fish plates, and suggest ways of ameliorating or halting the loss of fish and consequent operational problems.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This report comprises a mean weekly summary of the raw data of the fish population of the Stocks Reservoir major tributaries in conjunction with completed maps, diagrams, tables and figures. These cover the Stocks tributary stream survey, the Fishery and fish plate impingement. This paper does not constitute a final report which the author intends to submit as a Ph.D. thesis. However, it does present much of the data and analysis completed in its final draft, which may be of immediate use and benefit to the Authority.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Estimates of the growth (K), natural mortality (M), consumption/biomass (Q/B) rate and trophic level (TL) for 35 species in the upper Paraná river floodplain and the Itaipu reservoir (interconnected ecosystems) are presented. A compilation of these biological statistics is made for comparison purposes and some general trends are briefly discussed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Parameters and related statistics of the length-weight relationship of the form W=aL super(b) are presented for 72 species of fish caught in the area of the Itaipu Reservoir in Parana, Brazil. The b values varied between 2.34 and 3.35, with the mean b=2.986 (s.d.=0.230) not significantly different from 3.0 (df=7, p=0.05).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Consensus, compromise and cooperation. That was how more than 100 fishers reached agreement on how they would manage their own fishery in a small reservoir in northeastern Brazil. The long hard road that led to the agreement, the final congress in which fishers made minor history and the lessons that others may draw from the experience are described in this article. The fishers agreed on a nonfishing period of protected areas and a seasonal ban on certain nets in the face of a government department that told them the measures were non-building and essentially illegal.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The case presented in this article clearly indicates that reservoir and lake resource systems, reservoirs in the Asian context lakes plus reservoirs in the African context, have been given a lower priority than deserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Estimates for the growth parameters (L sub( infinity ) and K) mortality coefficients (Z,M and F) and exploitation rate (E) for the sciaenid Plagioscion squamosissimus are presented. The following results were obtained: 1) for male: L sub( arrow right )=44.2 cm, K=0.30 yr super(1), Z=0.82 yr super(1), M=0.66 yr super(1), F=0.16 yr super(1), and E=0.20; and 2) for females: L sub( arrow right )=68.4, K=0.22 yr super(1), Z=0.91 yr super(1), M=0.47 yr super(1), F=0.44 yr super(1) and E=0.49. Females are more heavily fished than males. Artisanal fishing carried out with gillnets, is mainly directed toward the young section of the population and individuals reproducing for the first time.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The length-girth relationships of Javanese carp (Barbodes gonionotus) and hampal carp (Hampala macrolepidota) in the Jatilujur Reservoir, Indonesia were examined. The equations derived from estimating the maximum girth of Javanese carp are G sub(m) = -1.19 + 0.80L, and for the hampal carp, G super(m) = -0.47 + 0.62L. Models relating head girth to total length are also given. The relationship between G sub(m) (maximum girth) of fish caught and gillnet mesh size is also briefly discussed.