Standardisation and mass production of shrimp trawlers and other fishing boats in India

This paper deals with the existing fishing crafts, new vessel types, boat building programmes, their standardisation and mass-production in India.

Fishing gear and methods of the river Brahmaputra in Assam

Potentially the inland fishery resources of the country are of very high order. But the present level of their exploitation is far from optimum, mainly because of the inadequacies of the existing fishing gear and methods. There is vast scope for increasing the fish production from inland waters by improving the existing gear and methods. This would require a thorough study of the fishing gear and methods in vogue, of which very little is known at present. In the present communication the authors discuss the fishing gear and methods of the river Brahmaputra, in Assam, based on a survey carried out by them during January-February 1964. The survey covers a 640 km stretch of the Brahmaputra River, its important tributaries and connected bheels, from Dhubri to Dibrugarh. As a result of the survey about 19 types of fishing nets, which could be grouped into eight classes, were identified. The salient technological features of the gears and their methods of operation are discussed class-wise. The characteristics of the individual types are shown in tables. The materials used for gear and gear accessories, are briefly discussed. The classification and relative importance of different types of gear are examined. Besides, the influence of the ecological and topographical features of the river on the development of different types of fishing gears, is also discussed.

An interpretation of the data from "The effect of mesh size on the fishing efficiency of sardine gill nets"

The paper "The effect of mesh size on the fishing efficiency of sardine gill nets" [K.M. Joseph and A.V. Sebastian, Fish. Tech; 1(2), 180-182 (1964)] marks an important step in the progress of fisheries technology and biology in India.

Preliminary experiments on electrical fishing in fresh watter [i.e. water]

Fishing using electricity is a new technique and is still in the experimental stages in many of the advanced countries. While no published records are available in India, considerable work has been done in Germany, United States, Canada, and United Kingdom. These papers mainly deal with the behavior of the fish in the electrical field, the physiological effects of electrical current on fishes, methods of electrofishing, electric fencing etc. The following experiments on electrical fishing were conducted with a view to studying the distribution of electrical field when an alternating current is passed through two fixed electrodes in fresh water and to study the reaction of different fresh water fishes to the field.

Experiments in fishing with shrimp trawls: on the standardisation of tickler chain

The communication deals with the results of experiments conducted off Gujarat coast for the standardisation of "Tickler chain" for shrimp trawls. Of the short link chains made of 3.2 mm, 4.8 mm and 6.2 mm rods the second was observed to increase the yield of shrimp in the net and without in any way adversely affecting the performance of the gear. The chains used had no influence on the fish catch.

Impulse generator for electrical fishing

Since impulse current has been found to be more economical and more effective for conducting electrical fishing an impulse generator was designed and fabricated. The principle and description of the impulse generator are given in the paper. Even though it is not giving theoretical value of the impulse voltages it has been found that for conducting electrical fishing it is producing necessary voltages.

Mechanization of fishing craft and the use of improved fishing gear

Since the year 1925, attention has been focused periodically on the stagnation in the local fishing industry, and those who have studied the subject have been unanimous about the need to introduce modern fishing craft which are capable of working more fishing gear. This report outlines the stages through which the evolution of more effective fishing operations has progressed, both in the gradually increasing use of mechanical propulsion for boats and in the adoption of more modern gear and techniques by local fishermen. No reference is made in this report to the operation of deep-sea trawlers (Sivalingam, 1956) a phase of development which has hitherto not influenced the local fishing industry to any appreciable extent.

Lobster fishing in Ceylon

The presence of spiny lobsters in the reefs lying off the coasts of Ceylon is known to local fishermen and skin divers. However, a well-established fishery for these lobsters does not exist as fishermen engaged occasionally in this activity catch only a few lobsters during the course of a day's fishing. Considering the present state of development of lobster fishing in Ceylon, it is not possible to state whether lobsters are found in sufficient numbers in the seas off Ceylon. This knowledge is very important before the introduction of new methods of fishing can be made. Experiments were therefore conducted to determine the most efficient type of trap that could be used to appraise the resources present in the coral reefs and other rocky areas. Designs of traps, similar to those used in Scotland, England, Wales and Canada, were made locally. These were tested for efficiency in areas known to be inhabited by spiny lobsters.

Fishing gear research at the Central Institute of Fisheries Technology

The Craft and Gear Wing of the Central Institute of Fisheries Technology was established to develop the country's fishing boats and implements scientifically and systematically. The Wing was organized in the year 1957 as a part of the fisheries development schemes included under the Second Five Year Plan.

Comparative fishing ability and economic efficiency of mechanised trawlers operating along the Kerala coast

This study was undertaken with a view to finding out the comparative fishing ability and economic performance of different fishing vessel sizes 9.15m (30'), 9.76m (32') and 10.97m (36') designed by the Central Institute of Fisheries Technology and operating along the Kerala coast. Data were collected from selected vessels of these sizes for four consecutive fishing seasons from 1964-65 to 1967-68. The catch/unit effort and total effort per year for the 10.97m (36') vessels were much better than those for the 9.76m (32') vessels. The yearly landings and the crew remuneration for the former were about twice those of the 9.76m (32') vessels. The economic efficiency of the 10.97m (36') vessels was also much better. The decline in landings per year in both size groups was more due to the reduction in the effort per year than the decline in catch/unit effort.

Experimental fishing in Hirakud Reservoir, Orissa (1965-67)

The comparative efficiencies of simple gill net, vertical line net and framed net in exploiting the fishery of Hirakud Reservoir in Orissa were studied. Though comparatively costlier to fabricate, the framed net gave better results than the other two.

Indigenous substitutes for "Lignum vitae" for making stern bearings for fishing boats

Difficulties are very often encountered in selecting proper material for making stern bearings for fishing boats. Conventional materials such as white metal, bronze etc. wear out too fast also causing considerable wear to the propeller shaft. Lignum-vitae, a natural wood commonly used for this purpose, is not available on a commercial scale in our country. Results of trials carried out to find out suitable substitutes for lignum-vitae from among indigenous timbers are presented in this paper.

On the troll line investigations off Cochin during five fishing seasons. Pt. 1. Investigations during 1960-61 and 1961-62 seasons

There is apparently great scope for improvement of the design and operational aspects of the gear particularly for the effective exploitation of seasonal fisheries like that of seer, tuna, barracuda etc. In order to evolve improved, yet cheap trolling gear regular investigations were undertaken by the Craft & Gear Wing of the Central Institute of Fisheries Technology, off Cochin for five fishing seasons and the results of these studies are incorporated in this paper.

Scantlings for small wooden fishing vessels

Studies are carried out to find a suitable basis of specifying scantlings for wooden fishing vessels for India, especially for the range 30' to 50' length overall. Equations of the type y=a (where 'y' is scantling in inches, N is cubic numeral in ft³ and 'a', 'b' are constants) are fitted to the scantling tables (applicable to vessels 50’ and above) available from USA, Newfoundland, Denmark, France and Scotland and they are found to represent the regulations accurately. These lines are corrected for standard frame and beam spacing and molded/sided dimensions to bring them on a common basis for comparison and minimum scantling lines for the main structural members are derived. These lines are extended to cover the range 30' to 50' which is generally outside the range of the above regulations.

On the troll line investigations off Cochin during five fishing seasons. Pt. 2. Investigations during 1963-64 season

During this season the investigations were mainly directed towards elucidation of the selective action of trolling lures. Feather jigs, buffalo horn jigs, stainless steel jigs, Japanese whale bone jigs and plastic jigs were selected. Operations were carried out from Fisheries technology No. 5.