Influence of number of valves on catch composition of a fishing pot trap (Lege) in River Rima, north western Nigeria

Three types of prototype (Lege) traps with different numbers of entrance valves were evaluated in River Rima, north western Nigeria. The traps contained 4,6 and 8 valves, tagged 4-V, 6-V and 8-V respectively. The experiment was carried out in a randomized complete block design with one factor each replicated three times. Data collected on fish diversity, number biomass and sizes were subjected to descriptive statistics and analysis of variance. The results of the catch composition showed close diversity index of 0.86 for 6-V, 0.80 for 8-V and 0.60 for 4-V Lege traps. However, the number (41%) and biomass 48%) of fish caught in the 6-V Lege trap were significantly (P0.05) higher than those caught in the other traps. There was no definite trend in the sizes (length and girth) of fish caught in the traps. On the basis of species diversity, and the number and biomass of fish caught, the 6-V Lege showed preference for adoption than the other two traps. However, further studies are recommended on the appropriate mesh size net for the trap in line with the provisions of fisheries edicts

Influence of number of valves on catch composition of a fishing pot trap (Lege) in River Rima, north western Nigeria

Three types of prototype (Lege) traps with different numbers of entrance valves were evaluated in River Rima, north western Nigeria. The traps contained 4,6 and 8 valves, tagged 4-V, 6-V and 8-V respectively. The experiment was carried out in a randomized complete block design with one factor each replicated three times. Data collected on fish diversity, number, biomass and sizes were subjected to descriptive statistics and analysis of variance. The results of the catch composition showed close diversity index of 0.86 for 6-V, 0.80 for 8-V and 0.60 for 4-V Lege traps. However, the number (41%) and biomass (48%) of fish caught in the 6-V Lege trap were significantly (P<0.05) higher than those caught in the other traps. There was no definite trend in the sizes (length and girth) of fish caught in the traps. On the basis of species diversity, and the number and biomass of fish caught, the 6-V Lege showed preference for adoption than the other two traps. However, further studies are recommended on the appropriate mesh size net for the trap in line with the provisions of fisheries edicts

Pesca experimental de atum com "long line" na ZEE moçambicana

Results of the analysis of statistical data gathered aboard 2 crafts licensed for experimental commercial tuna fishing with long-line in the EEZ of Mozambique are presented.

Electric fishing survey of the gravel addition sites on the River Wyre, Grizedale Beck and Joshua's Beck.

Although geographically the River Wyre lies between two rivers containing major migrations of adult salmon and sea trout, its rod & line fisheries have for a number of years produced exceptionally low catches. In order to determine the causes of this the Wyre Salmon and Sea trout Restoration Group (WSSRG) was conceived in 1994 as a partnership between the then National Rivers Authority (now Environment Agency), local landowners, angling clubs and interested parties. Two studies of 1994 and 1995 stated that there is a shortage of useable spawning gravels on the river. This is compounded by Abbeystead Reservoir acting as a gravel trap, the siltation of gravels on several side becks and problems with access to available gravels by returning adults. There was also perceived to be a need for accurate fishery data from the river encompassing redd counts, catch data and surveys of fry populations. The 1995 report suggested a number of management proposals which might be adopted in order to improve and create available spawning habitat for migratory salmonids. Funding was made available to create three spawning gravels on each of two side becks (Grizedale Beck and Joshua's Beck) and the addition of gravels to a site oh the main river below Abbeystead Reservoir. Modifications were also made to the fish pass at Abbeystead to allow easier passage of fish. These improvements were made in the autumn of 1995. Salmonid spawning redd counting was undertaken on the whole Wyre catchment in 1995/1996 and specific surveys by electric fishing on the gravel enhancement sites in the summer of 1996. This report details the current state of the improvement works that were undertaken and presents the results of electric fishing surveys in September 1996. A number of lessons have been learnt which will be of great benefit to the Fisheries Function in other parts of the Wyre catchment and the Central Area in general.

Analysis of permanent magnets as elasmobranch bycatch reduction devices in hook-and-line and longline trials

Previous studies indicate that elasmobranch fishes (sharks, skates and rays) detect the Earth’s geomagnetic field by indirect magnetoreception through electromagnetic induction, using their ampullae of Lorenzini. Applying this concept, we evaluated the capture of elasmobranchs in the presence of permanent magnets in hook-and-line and inshore longline fishing experiments. Hooks with neodymium-iron-boron magnets significantly reduced the capture of elasmobranchs overall in comparison with control and procedural control hooks in the hook-and-line experiment. Catches of Atlantic sharpnose shark (Rhizoprionodon terraenovae) and smooth dogfish (Mustelus canis) were signif icantly reduced with magnetic hook-and-line treatments, whereas catches of spiny dogfish (Squalus acanthias) and clearnose skate (Raja eglanteria) were not. Longline hooks with barium-ferrite magnets significantly reduced total elasmobranch capture when compared with control hooks. In the longline study, capture of blacktip sharks (Carcharhinus limbatus) and southern stingrays (Dasyatis americana) was reduced on magnetic hooks, whereas capture of sandbar shark (Carcharhinus plumbeus) was not affected. Teleosts, such as red drum (Sciaenops ocellatus), Atlantic croaker (Micropogonias undulatus), oyster toadfish (Opsanus tau), black sea bass (Centropristis striata), and the bluefish (Pomatomas saltatrix), showed no hook preference in either hook-and-line or longline studies. These results indicate that permanent magnets, although eliciting species-specific capture trends, warrant further investigation in commercial longline and recreational fisheries, where bycatch mortality is a leading contributor to declines in elasmobranch populations.

No evidence of bias from fish behavior in the selectivity of size and sex of the protogynous red porgy (Pagrus pagrus, Sparidae) by hook-and-line gear

Most fisheries select the size of fish to be caught (are size selective), and many factors, including gear, market demands, species distributions, fishery laws, and the behavior of both fishermen and fish, can contribute to that selectivity. Most fishing gear is size-selective and some, such as gill nets, are more so than others. The targeting behavior of fishermen is another key reason commercial and recreational fisheries tend to be size-selective. The more successful fishermen constantly seek areas and methods that yield larger or more profitable sizes of fish. Fishery regulations, especially size limits, produce size-selective harvests. Another factor with the potential to cause selectivity in a hook-and-line fishery is the different behavioral responses of fish to the bait or lure, whether the different responses arise among different fish sizes or between the sexes.

Gross energy requirement in fishing operations

Energy is a key input into the fish harvesting process. Efficient use of energy helps in reducing operational costs and environmental impact, while increasing profits. Energy optimisation is an important aspect of responsible fishing as enunciated in the Code of Conduct for Responsible Fisheries. Gross Energy Requirement (GER) is the sum of all non-renewable energy resources consumed in making available a product or service and is expressed in energy units per physical unit of product or service delivered. GER is a measure of intensity of non-renewable resource use and it reflects the amount of depletion of earth’s inherited store of non-renewable energy in order to create and make available a product or service. In this study, GER in fish harvesting up to the point of landing is estimated in selected fish harvesting systems in the small-mechanised sectors of Indian fisheries and compared with reported results from selected non mechanised and motorised fishing systems to reflect the situation during 1997-1998. Among the fish harvesting systems studied, GER t fish-1 ranged from 5.54 and 5.91 GJ, respectively, for wooden and steel purse seiners powered by 156 hp engines; 6.40 GJ for wooden purse seiner with 235 hp engine; 25.18 GJ for mechanised gillnet/line fishing vessel with 89 hp engines; to 31.40 and 36.97 GJ, respectively, for wooden and steel trawlers powered by 99-106 hp engines.

Traditional fishing methods of Lakshadweep

Economy of the Lakshadweep islanders depends mainly on coconut farming and fishing. About 30-40% of the population are full time fishermen. Some of the fishing methods practised by the islanders are still traditional, Tuna forms the main established fishery of the island. Pole and line fishing is the most effective fishing method for surface tuna shoals. Most of the traditional fishing operations prevailing in the islands are unique and conducted during neap tides only.

On the use of different natural baits for sea-fishing in India

Rod and line, hand-line, trolling line and fish-traps are the different types of fishing gears wherein suitable fish baits are employed with a view to luring the catch. The coastal fishermen of India mostly use different types of natural fish-baits to catch fishes like Perches, Carangids, Sciaenids, Scombroids and Elasmobranchs. The reactions of the fishes caught to the different baits used are quite varied. Successful line fishing operations very much depend on the fish-baits. A detailed record of the variety of fishes caught, types of fishing and different baits used by the coastal fishermen of India has been made.

A preliminary account and review of the simple methods for determining the operational parameters of fishing gear, underwater, with notes on its application

An account and review of the simple methods for determining the operational parameters of fishing gear, underwater, such a tilt of otter boards (outwards or inwards, forwards or afterwards), vertical height of net, its horizontal spread, angle of divergence at bosom, spread between wing tips, angle of inclination of danlenos, butterfly, slope of legs and sweep-line has been given. The relationship of distance between the otter boards spread and the vertical height of net has been obtained as generally linear. The possibilities of regulating the vertical height of net (dependent variate) and spread of otter boards (independent variate) for increasing the fishing efficiency has been discussed. The angle of attack of oval shaped otter boards used during the operations still remain undetermined, however, it has been explained how the best angle of attack for increasing the efficiency of gear can be obtained by regulating the ratio of depth to warp for a given net. The inadequacy of the mere indices of catch per hour of trawling in comparing the relative efficiency of trawls in gear research studies has been indicated. The importance of estimating the operational parameters and its application to commercial fisheries depending upon the distribution pattern of fish and in gear research has been discussed. The efficiency of the jelly bottle method has been compared statistically with the observations made on the trawl gear underwater with instruments.

Experimental fishing in Hirakud Reservoir, Orissa (1965-67)

The comparative efficiencies of simple gill net, vertical line net and framed net in exploiting the fishery of Hirakud Reservoir in Orissa were studied. Though comparatively costlier to fabricate, the framed net gave better results than the other two.

Preliminary report on experimental fishing with purse seine and lampara nets for small pelagic fish varieties around Sri Lanka

Government of Sri Lanka initiated a project for conducting a experimental skipjack fishery using modern pole and line method and an experimental fishery for live bait and small pelagic fish using purse seine and lampara nets, with the, assistance of UNDP and FAO. Accordingly, the survey for small pelagic fish varieties using the purse seine and lampara nets commenced in April, 1972 and will continue until the end of 1975. This paper is a preliminary report on the results of the survey carried out between Septernber 1972 to October 1978.

Problems facing the deep-sea fishing industry in Sri Lanka

Fishing in Sri Lanka has been carried on largely with the use of traditional methods and in recent years there has been a marked increase in the use of mechanized craft for fishing. Although some effort has been made in the sphere of deep-sea fishing both by trawlers and long line tuna boats, such efforts have not made a significant contribution towards improving the industry. The progress of deep-sea fishing in Sri Lanka has been hindered due to a number of reasons described by the author.

Fishing gear and methods for off-shore fishing in Sri Lanka

The author describes the commercial viable off-shore fishing methods for catching known commercial resources available around Sri Lanka. He also describes the in-shore fishing methods such as bait fishery which are related and of prime importance for carrying out certain off-shore methods. The paper is intended as a background for the description of fishing methods. The methods discussed are: (1) Longlining for large pelagic species such as large tuna (yellow fin, big eye), shark, spearfish and others; (2) Drift-netting for small and large tuna species (skipjack, yellow fin and others), shark, spearfish, etc.; (3) Pole and line for all deep-sea pelagic species such as skipjack, yellow fin, frigate mackerel, etc.; and (4) Purse seining (small scale) for small pelagic species suitable as bait fish for pole and line and longline fisheries.

Cathodic protection of the hulls of fishing trawlers in India

Nearly 10,000 mechanised fishing trawlers mostly built of wood and about 100 trawlers built of steel besides a few fiberglass reinforced plastic and a couple of ferro-cement boats constitute the modern fishing fleet of India at present. Metallic corrosion in sea water is a very well-known phenomenon in all ships and various other marine structures; the exact financial loss and the material breakdowns have never been fully realized among the trawler owners in India. The Central Institute of Fisheries Technology at Cochin has been studying these problems for some years and has been able to assess the significance of underwater corrosion particularly of the hull below water line in the trawlers and suitable remedial measures have been suggested in this paper.