23 resultados para Wood harvesting
Resumo:
Influence of moisture and specific gravity on the strength of mango wood is discussed. The co-efficient of correlation between specific gravity and breaking strength was found to be non-significant. The relation of strength and moisture was found to be highly significant. The mean strength values indicated a reduction in strength when the moisture increased from 8.5 to 18.8%. However no appreciable difference in strength values could be observed when moisture increased above 37%. The strength-moisture relationship is a straight line, passing approximately through the fibre saturation point. By using the exponential formula, the breaking strength corresponding to any moisture level between zero and fibre saturation can be determined.
Resumo:
Wooden test panels of different species of wood sheathed with fibre-glass reinforced plastic were subjected to immersion tests along with corresponding controls in Cochin Port area and the effect of the protective coating studied.
Resumo:
A detailed study of the fortification of normal creosote and low temperature creosote with As sub(2) O sub(3) at 40°C, 50°C, 60°C, 70°C, 80°C and 90°C was carried out. When compared to normal creosote, low temperature creosote has been found to combine more easily with As sub(2) O sub(3) when temperature was . raised from 40 to 90°C. The incorporated arsenic values obtained shows that low temperature creosote with high phenolic content, retains considerably more As sub(2) O sub(3) and a maximum of 0.2180% w/w can be incorporated in low temperature creosote at 90°C.
Resumo:
A detailed study on arsenical creosote with reference to leaching, corrosion and anti-borer properties was carried out. Results showed that aging had very little effect on the preservative which suggested better fixation of the preservative into the wood. Corrosion of mild steel, galvanised iron, aluminium-magnesium alloy (M57S) and copper panels in the preservative was found to be negligible. Normal creosote and low temperature creosote of Regional Research Laboratory, Hyderabad, both fortified with arsenic trioxide resisted borer damage on wooden panels for a period of over five months in the port of Cochin. The performance of low temperature creosote fortified with arsenic was found to be equally satisfactory when compared to normal creosote fortified in the same manner. A loading of 208.6 Kgs/ml³ for Haldu (Adina cordifolia) and 138 Kgs/m³ for Mango (Mangifera indica) in the case of normal creosote and 177 Kgs/m³ for Mango the case of RRL creosote were found to be sufficient for treating the wood.
Resumo:
Modern fishing boats have to be built not only on perfect lines but also with sound and strong construction materials that will ensure a long lasting trouble free service commensurate with the heavy capital investment involved. Choice of construction materials for fishing boats need careful scrutiny as they have to perform too well under most aggressive environments-sea-water and marine atmosphere. A number of alternative boat-building materials are now available whose comparative merits and demerits as well as comparative costs are brought out in this paper.
Resumo:
An interesting assemblage of commensalic organisms ranging from Protozoa to Arthropoda has been identified from the wood boring animals (molluscs and crustaceans) from the south-west coast of India. Certain aspects of the general biology of the associated ciliates such as the nature of incidence, division in relation to environmental parameters, survival outside the body of the host and reactions related to the general condition of the host are described. Results are also presented of the tolerance of the rare commensalic hydroid Eutima commensalis to different salinities of the medium.
Resumo:
Vertical distribution of marine wood boring and fouling organisms from three different estuarine areas namely, the Ernakulam channel in the Cochin backwaters, Ayiramthengu in the Kayamkulam Lake and Neendakara in the Asthamudi Lake during the post-monsoon, the pre-monsoon and the monsoon periods is presented. The boring organisms noticed during the present study were Martesia striata, Teredo furcifera, Nausitora hedleyi and Sphaeroma terebrans. The dominant fouling organisms were Balanus amphitrite amphitrite, calcareous worms and Modiolus sp. Algae and diatoms were very common on the sub-tidal panels during the monsoon. The incidence of Teredo, Nausitora and calcareous tube worms were significantly high on the bottom panels. Sphaeroma, Balanus and Modiolus occurred in greater numbers on the intertidal panels.
Resumo:
Diatom culture and larval feeding experiments were conducted to test the viability and acceptability of preserved algal concentrates. C. calcitrans is characterised by the presence of setae which keep them suspended in cultures and make autoflocculation very difficult. Flocculation was induced by the addition of a floc-forming chemical. Using the optimum conditions, it was possible to harvest the algae within 1-h settling time and with about 84% recovery. The viability of frozen Chaetoceros was determined by actual cell reproduction. Preliminary feeding experiments showed that Chaetoceros can be successfully used as a substitute for fresh diatoms as feed for Penaeus monodon larvae. Simple freezing techniques, with or without the use of protectants has been found convenient for preserving algal concentrates in small volumes for both feeding and culture purposes.