Small scale manufacture of crude agar from Gracilaria seaweeds

A simplified process was worked out to prepare crude agar from red seaweeds (Gracilaria sp.). The process required careful preliminary cleaning and bleaching (sun-drying) of the weed. The agar was extracted by boiling with water in a mixture (2%) strong enough to set as a jelly. Freezing the jelly over a 3—day period in an ice-making machine, adjusted to work slowly, separated out ice and agar. The blocks were thawed out and the agar dried in the sun. The efficiency of extraction was over 800/A.

Survey on the quality of Jaadi available [in] Sri Lankan market

A quality of survey was conducted at the fish curing yards in a northwest coast and the southern coast in Sri Lanka. A total of 40 samples different varieties of fishes were collected from the market and jaadi curing yards and all were evaluated for the quality, fungal and insect infestation. Samples were analyzed for proximate composition chemical, microbiological and sensory quality. Thirty percent of the total analyzed samples of fish were found to be unfit for consumption. Samples collected from Negombo were found to the infected with maggots. Only 42% samples had dry matter above 50%. All the samples showed a protein content above 20%. The highest protein content was 27.92% in hurulla. Over 90% of the samples had TVN at acceptable quality limits (>40). The TBC for 33% of the samples were in the range 104-105/g range, while 48% were in the range of 107-108/g due to contamination of maggots and fungi. The Survey showed jaadi had a high level of protein in its composition. But defects of curing process such on imperfect cleaning inadequate salting resulted in low (Chemical and microbiological) quality of the product.

Effect of pond aeration on growth and survival of Penaeus monodon Fab.

The effect of paddle wheel aeration on shrimp growth and survival were studied at a commercial farm at Chandipur coast of Orissa, India, at different stocking densities of Penaeus monodon. Four different aeration patterns were adopted and evaluated. Influence of individual aeration pattern on average survival rate was not highly significant (p<0.05) at different stocking densities, while different aeration patterns had significant influence (p

A proforma for assessment of the levels of sanitation in fish processing establishments

Over the past 15 years of its development, the fish processing industry in India has shown considerable improvement in maintenance of hygiene during handling of the raw material, processing and marketing of the finished product. This is best manifested in the lowering of upper limits of bacterial loads in factory environs and in processed products (Pillai, 1971). More care and attention is given by the processors in recent years in the scientific cleaning and sanitizing of utensils and equipment, chlorination of water supplies and personnel hygiene. An example of sanitation score form is given to help scientists and technologists to evaluate the hygienic status of the processing units.

Quality of cured fishery products from Malabar and Kanara coasts

Results of chemical, bacteriological and organoleptic quality studies of cured fishery products of commerce collected from six major fish curing centres on the west coast of India are presented. 77.12% of the samples had moisture above 35%, 97.18% showed salt content below 25% and all samples had acid insoluble ash above 1.5%. 42.32% gave standard plate counts above 10,000 and 45.77% were contaminated with 'Red' halophiles. The major defects in curing were imperfect cleaning, inadequate salting and unhygienic conditions of processing.

Modified water spray chumming system for pole and line fishing of tuna

A water spray chumming system consisting of a 65 x 50 mm centrifugal pump driven by the propulsion engine through a PTO clutch and 'V' pulley power transmission system has been developed for the pole and line fishing of tuna. Water is sprayed through pipe loop system fitted on the edge of the fishing platform of the boat through small holes. The distance of the spray length can be adjusted by controlling the flow of the pump discharge water through a wheel valve.

Development of a fishing log for use in trawlers

The paper describes the technical and operational features of a composite equipment for simultaneous measurement of five important parameters, warp load, boat speed, water temperature, water salinity and air temperature pertaining to the craft, gear and the environment. The equipment is designed for continuous measurement in small and medium crafts easily without disturbance to routine fishing operations. The system operated on 9V supply, is suitable for portable operations from one vessel to another. The compact electronic meter kept in the wheel-house displays the data one by one in engineering units.