On the effect of tickler chain on the catches landed by a 55 ft. trawl net

The communication deals with the results of comparative tests conducted from Cochin base to study the effect of a tickler chain on the catches landed by a 55' shrimp otter trawl. The net was operated with and without chain and 82 hauls of 61 hours and 28 minutes total duration were made. The following are the conclusions: (a) the catch of shrimp per hour of trawling is increased by about 71% due to attachment of the chain to the ground rope; (b) the attachment of the tickler chain also increased the catch of fish by 25%. The increase in the catch of shrimps and fish is probably due to the disturbance caused by moving chain attached to the foot-rope.

An experiment conducted with a floating trawl net off Cochin

The paper deals with an experiment with a floating trawl net off Cochin, using a pair of curved otter boards and a transducer mounted on the head rope of the net. 32 hauls were made with different towing speeds and warp length keeping one factor constant for varying parameters of the other factor. The working data for 32 hauls are presented and the effect in the fishing depth of the net due to the variation in one factor is mentioned. The 'fishing depth' is indicated in this paper as the distance between the head rope and the bottom. The usefulness of similar experiments with added information on the angle of leading warp at the stern for the exploitation of column fishes in Indian waters is indicated.

General principles of the design of trawl net

The classification and the principles of design and construction of trawls in general are described. The method of calculating the length of rope required at each part for mounting the net and the requirements of floats and sinkers are given. The cutting rates to tailor machine made webbing are also indicated.

Results of comparative fishing trials with rectangular flat and rectangular curved otter boards

The communication deals with the results of comparative fishing operations conducted to study the effectiveness of rectangular flat and rectangular curved otter boards. Based on the analysis of data gathered during the course of actual field trials, following conclusions have been drawn: the average catch per hour of trawling was more by 22 kg during attachment of rectangular curved otter boards. The average horizontal spread between rectangular curved otter boards in action was more by 13% and works out to 50% of the head-rope length of the net including sweeps. The towing resistance of the gear with horizontally curved otter boards was more by 10%.

A new large mesh trawl for dermersal fishery

A new large mesh demersal trawl of 32 m head rope length is found more efficient for the exploitation of demersal fishes off Veraval. Increased catch with a proportionate increase of demersal fishes was obtained when compared to a standard bottom trawl of 32 m head rope length with small meshes, suggesting the possibility of increasing the mesh size of trawl nets in the forepart. This increases the mouth area of net which enhances the fishing power by covering a large area per tow. The net is simple in construction, easy to repair and maintain and fewer in the number of meshes.

On sun-drying of Bombay duck

Sun-drying of Bombay duck by hanging on scaffolds gave better products than those obtained by drying them in trays. Optimum rate of drying and quality of dried product were obtained when the fish were suspended at the rate of 50 to 60 per meter length of the rope. The quality of the raw material as affected by the delays in different hauls in the fishing trip was reflected in the dried products also.

Development of electro-trawl system in marine environment

High voltage pulsed current produced on board a trawler is fed to electrodes distributed along the foot rope of a trawl net through two core TRS cable which builds up a homogeneous electrical field around the net mouth. By comparative fishing tests with the electrified and non-electrified 32 m long wing trawl net, the increase in total catch of shrimps and fishes was found to be 19.8 and 36%, respectively.

Double-rig shrimp trawling, its rigging, comparative efficiency and economics

A radical and revolutionary change from the hitherto employed shrimp trawling is reported for better productivity and economy in deep sea trawling with medium and large vessels. Studies carried out off Veraval with a 13.7 m. four seam shrimp trawl as conventional single-rig and two 6.8 m four seam shrimp trawls as double-rig from a 15.2 m fishing vessel showed an increase of 98% shrimp catch by double-rig over single-rig at 86.3 % of the power utilised by the latter. It has also been worked out, theoretically, how better this available power can be utilised for further improvement of catch. An increase of 15% head rope length in case of double-rig over the optimum single-rig gear of any vessel is recommended.

Twin trawling for shrimp with dummy doors

Twin trawling; a new concept in shrimp trawling is described in this paper. It essentially involves towing of two trawls of equal size connected in sequence at the inner head and foot rope legs and using a pair of outer otter boards and central neutral door or dummy door with triple bridles and single tow warp. A comparative study with conventional stern trawling using a standard 13.7 m four seam shrimp trawl and two 6 8 m standard four seam trawls as twin-rig has shown considerable reduction in the utilization of power (20 %) with better efficiency in shrimp fishing.

Biology and farming of the green mussel Mytilus smaragdinus

Biological investigations were carried out in Sapian Bay, Capiz from November 1975 to December 1976 with samplings conducted fortnightly. Histological studies on the gonad reveal a high percentage of ripe and spent females during the month of April and May, and ripe to near ripe during November to December. However, larval counts were highest on February 25, 1976 with 253 mytilid larvae per haul compared to 0-79 per haul during all other months. The high larval count was followed by the highest spat settlement during the next sampling period two weeks later, with the spat collector set in the water during the February 25 sampling. The four materials tested, blue polypropylene fiber rope, black polypropylene fiber, and coir rope, all had their highest spat counts during this period with an average of 471 spats per standard 10 cm rope piece. The range during the other time periods is 2-283 spats. Of the 4 materials tested, the black fibrillated polypropylene film had the highest larval counts in 15 out of a total of 25 sampling periods. The blue rope was the poorest spat collector. Coconut husk was tested later on and it proved to have a very high catchability, with spats completely enveloping the husk surface. Growth monitored from one cohort in Sapian Bay averaged 10 mm per month. 50-60 mm is considered marketable size. Trial growth experiments with transplanted mussels were also conducted at Igang Bay in Guimaras Island, Makato River in Aklan, and a milkfish pond in Leganes, Iloilo. Survival in Igang was less than 50% after the second week, and the condition of the surviving mussels can be described only as 'watery' with the mantle completely transparent. Mortality was minimal in Makato but the growth rate was only 30% that of Sapian Bay. The pond experiments were terminated due to severe crab predation.

Performance of 25m large mesh demersal trawl off Veraval, north west coast of India

Performance of a 25m large mesh demersal trawl, with 150mm mesh size in the fore parts of the trawl was evaluated in comparison with one boat high opening trawl of the Bay of Bengal Programme (BOBP) with 360 meshes of 160mm mesh size and 25.6m head rope length. An 8.2% increase in catch was obtained by 25m large mesh demersal trawl. The gear is comparatively cheaper, lighter in construction and offered better horizontal spread with significantly lower towing resistance. Commercial suitability of the gear for efficient harvesting of demersal fish resources of the region is discussed.

Comparative feature on design, construction and installation of three different model of low cost solar tunnel dryers

The study was conducted in collaboration with the ECFC project of the FAO (BGD/97/017) in Cox's Bazar to develop a low cost solar tunnel dryer for the production of high quality marine dried fish. The study areas were Kutubdiapara, Maheshkhali and Shahparirdip under Cox's Bazar district. Three different models of low cost solar dryer were constructed with locally available materials such as bamboo, wood, bamboo mat, hemp, canvas, wire, nails, rope, tin, polythene and net. Size of the dryers were: 20x4x3 ft ; 30x3x3 ft and 65x3x3 ft with the costs of Tk. 3060, 3530, 9600 for dryer 1, 2 and 3, respectively having different models. The drying capacities were 50, 150, 500 kg for dryer 1, 2 and 3 respectively. The average temperature range inside the dryers were 29-43°C, 34-51°C and 37-57°C for dryer 1, 2 and 3 respectively as recorded at 8:30h to 16:30h. The relative humidity were in the ranges of 22-42%, 27-39% and 24-41 % in dryer 1, 2 and 3 respectively. The fish samples used were Bombay duck, Silver Jew fish and Ribbon fish. The total drying time was in the range of 30-42, 28-38 and 24-34 hours to reach the moisture content of 12.3-14.5, 11.8-14.3, and 11.6-14.1% in dryer 1, 2 and 3 respectively. Among these three fish samples the drying was faster in Silver Jew fish followed by Bombay duck and Ribbon fish in all the three dryer.