An interpretation of the data from "The effect of mesh size on the fishing efficiency of sardine gill nets"

The paper "The effect of mesh size on the fishing efficiency of sardine gill nets" [K.M. Joseph and A.V. Sebastian, Fish. Tech; 1(2), 180-182 (1964)] marks an important step in the progress of fisheries technology and biology in India.

Bottom trawl codend mesh selectivity for Bagrus docmac (Forskahl) from Lake Victoria, with some remarks on the proposed trawl fishery

The methods of estimating codend selectivity for alternate hauls are briefly described and applied to Bagrus docmac (forskahl) data from Lake Victoria. Certain inconsistencies are noted and it is postulated that they may be due to differential escapement of larger Bagrus docmac through the trawl meshes when the different codends were fitted. The calculated 50% selection lengths yielded a fair regression on measured weigh give a fork length selection factor of 2.33, consistent with data from the smallest codend mesh size used. The implications of the findings are briefly discussed in relation to the proposed Haplochromis trawl fishery 1971.

Small mesh trawling

Experimental trawling operations for bottom fish were first begun in 1920 and consisted of surveys of the continental shelf around Ceylon and the west and east coasts of India. These preliminary surveys showed that the continental shelf of Ceylon was either very poor in bottom fish or that the ground was so rough that trawling has proved to be economically not sustainable (Malpas, 1926). Although a considerable amount of trawling has been carried out using small-meshed trawls, there is no record of the details of the gear used or any account of the relative efficiency of the different designs of trawls used in the operations. Experimental operations were, therefore, carried out off 80 h.p. boats such as m.f.v. Canadian and North Star, to select the most effective gear for these boats. In more recent times experiments were also conducted to select the most effective trawling gear for the 11-Ton boats of the Ceylon Fisheries Corporation. The results are reported in this publication.

A new large mesh trawl for dermersal fishery

A new large mesh demersal trawl of 32 m head rope length is found more efficient for the exploitation of demersal fishes off Veraval. Increased catch with a proportionate increase of demersal fishes was obtained when compared to a standard bottom trawl of 32 m head rope length with small meshes, suggesting the possibility of increasing the mesh size of trawl nets in the forepart. This increases the mouth area of net which enhances the fishing power by covering a large area per tow. The net is simple in construction, easy to repair and maintain and fewer in the number of meshes.

Mesh selectivity for spotted seer, Scomberomorus guttatus (Bloch & Schneider)

An attempt has been made to evolve a suitable mesh size for the commercially significant size group of S. guttatus. To obtain maximum sustainable yield taking biological factors also into consideration, 52 mm mesh bar nets are suggested for exploiting the fishery on both the East coasts of India.

Mesh regulation in backwater prawn fishing gear

Size grade composition of different species of prawn caught by various back water fishing gear have been enumerated. 57 to 75% of P. indicus captured was less than 10 cm in length. M. dobsoni and M. monoceros captured were less than 10 cm in length. A cod end mesh size of 20-25 mm has been recommended for stake nets for the capture of P. indicus of 10 cm length along with other species.

Shore seines for reservoirs - Part 2 - Studies on optimum mesh size

Fish landings by shore seines operated in the Hirakud reservoir were analysed species wise and their morphometrical details were recorded. Based on the above investigation proportionality coefficients in respect of important species of fish were worked out in order to detetmine the optimum mesh size as this was important from the conservation point of view. This communication discusses the significance of mesh regulation for shore seines.

Discriminant analysis for mesh selectivity studies

Discriminant analysis takes into consideration the natural correlation existing between different characteristics of fish when studying mesh selectivity. Some specimen data are presented for two different sets of fish and it is shown that the discriminant analysis shows a significant difference between the two sets where F test failed.

Effect of variation in mesh size on trawl efficiency

Result of comparative fishing trials with a bulged belly design with three different mesh ranges in the body and wing to study the effect of mesh size difference on the performance of gear is discussed. While there is no significant difference in catch rate, predictably the 40 mm mesh size trawl fared wen when small sized fish like anchovies formed the major catch. The trawls with 60 and 80 mm mesh size gave better horizontal spread at a lower resistance showing savings in fuel.

On the optimum mesh size for the capture of Barbus tor (Hamilton)

Results of mesh selectivity experiments on B. tor are presented in this paper. Selectivity curve on the basis of maximum girth of fish in relation to perimeter of mesh was worked out. The optimum girth/mesh perimeter ratio was found to be 1.31. A linear regression of G+0.445L=12.8 was fitted for conversion of length to girth.

Performance of 25m large mesh demersal trawl off Veraval, north west coast of India

Performance of a 25m large mesh demersal trawl, with 150mm mesh size in the fore parts of the trawl was evaluated in comparison with one boat high opening trawl of the Bay of Bengal Programme (BOBP) with 360 meshes of 160mm mesh size and 25.6m head rope length. An 8.2% increase in catch was obtained by 25m large mesh demersal trawl. The gear is comparatively cheaper, lighter in construction and offered better horizontal spread with significantly lower towing resistance. Commercial suitability of the gear for efficient harvesting of demersal fish resources of the region is discussed.

Trolling for Nile perch (Lates niloticus) in Lake Kyoga

Nile perch were introduced into Lake Kyoga in the mid·1950s from Lake Albert. Murchison Falls on the River Nile, between the two lakes, prevented Nile Perch and other elements of the typical nilotic fish population from naturally reaching Lake Kyoga. The introduction has been successful and considerable stocks of Nile Perch now exist in Lake Kyoga. In 1967, 13,000 tons of Nile Perch were estimated to have been landed by the commercial fishermen, fish of 200 lb. being now caught and specimens of 100 lb. being fairly common. Large Nile perch are caught commercially on long lines baited with live Protopterus' spp. or Clarias spp. Large mesh gillnets uccasionally take Nile Perch of up to 30 lb., but the high cost of the nets does not, at the moment, appear to justify this method of fishing; a 10 in. net, stretched 100 yards long (unmounted). 15 meshes deep and 60-ply nylon. costs approximately U. Shs. 300. The long·lines used are extremely simple and cheap to make, but considerable labour is needed to catch bait. Small Protopterus are normally caught by turning over floating rafts of grasses and papyrus, and extracting the fish from the root mass; this is hard and dirty work. Other small fish, more readily available, do not, according to fishermen, work as well, possibly because they are not as durable as the Protopterus or Clarias. Dead bait is never used.

Observations on the influences of codend mesh size on bottom trawl catches in Lake Victoria, with emphasis on the Haplochromis population

Codends of four different mesh size" were compared during exploratory bottom trawling on Lake Victoria. Small mesh sizes (19 and 38 mm) generally caught greater quantities of fish than large mesh sizes (64 and 76 mm) with haplochromis species responsible for the difference. The differences in catch rates were most pronounced where dense concentration of small haplochromis were found. This was generally in shallow water since the average size of haplochromis tends to increase with depth. Catch rates for species other than haplochromis were fairly similar for the codends tested, although there were indications of lower catches in small mesh coderlds fished through dense haplochromis concentrations. For haplochromis fished with 64 and 38 mm eodends, the estimated 50% retention lengths were 13.6 and 8.0 cm, respectively. The predicted value for the 19 mm codend was 4.5 cm.