A new large mesh trawl for dermersal fishery

A new large mesh demersal trawl of 32 m head rope length is found more efficient for the exploitation of demersal fishes off Veraval. Increased catch with a proportionate increase of demersal fishes was obtained when compared to a standard bottom trawl of 32 m head rope length with small meshes, suggesting the possibility of increasing the mesh size of trawl nets in the forepart. This increases the mouth area of net which enhances the fishing power by covering a large area per tow. The net is simple in construction, easy to repair and maintain and fewer in the number of meshes.

Mesh selectivity for spotted seer, Scomberomorus guttatus (Bloch & Schneider)

An attempt has been made to evolve a suitable mesh size for the commercially significant size group of S. guttatus. To obtain maximum sustainable yield taking biological factors also into consideration, 52 mm mesh bar nets are suggested for exploiting the fishery on both the East coasts of India.

Mesh regulation in backwater prawn fishing gear

Size grade composition of different species of prawn caught by various back water fishing gear have been enumerated. 57 to 75% of P. indicus captured was less than 10 cm in length. M. dobsoni and M. monoceros captured were less than 10 cm in length. A cod end mesh size of 20-25 mm has been recommended for stake nets for the capture of P. indicus of 10 cm length along with other species.

Shore seines for reservoirs - Part 2 - Studies on optimum mesh size

Fish landings by shore seines operated in the Hirakud reservoir were analysed species wise and their morphometrical details were recorded. Based on the above investigation proportionality coefficients in respect of important species of fish were worked out in order to detetmine the optimum mesh size as this was important from the conservation point of view. This communication discusses the significance of mesh regulation for shore seines.

Discriminant analysis for mesh selectivity studies

Discriminant analysis takes into consideration the natural correlation existing between different characteristics of fish when studying mesh selectivity. Some specimen data are presented for two different sets of fish and it is shown that the discriminant analysis shows a significant difference between the two sets where F test failed.

Effect of variation in mesh size on trawl efficiency

Result of comparative fishing trials with a bulged belly design with three different mesh ranges in the body and wing to study the effect of mesh size difference on the performance of gear is discussed. While there is no significant difference in catch rate, predictably the 40 mm mesh size trawl fared wen when small sized fish like anchovies formed the major catch. The trawls with 60 and 80 mm mesh size gave better horizontal spread at a lower resistance showing savings in fuel.

On the optimum mesh size for the capture of Barbus tor (Hamilton)

Results of mesh selectivity experiments on B. tor are presented in this paper. Selectivity curve on the basis of maximum girth of fish in relation to perimeter of mesh was worked out. The optimum girth/mesh perimeter ratio was found to be 1.31. A linear regression of G+0.445L=12.8 was fitted for conversion of length to girth.

Performance of 25m large mesh demersal trawl off Veraval, north west coast of India

Performance of a 25m large mesh demersal trawl, with 150mm mesh size in the fore parts of the trawl was evaluated in comparison with one boat high opening trawl of the Bay of Bengal Programme (BOBP) with 360 meshes of 160mm mesh size and 25.6m head rope length. An 8.2% increase in catch was obtained by 25m large mesh demersal trawl. The gear is comparatively cheaper, lighter in construction and offered better horizontal spread with significantly lower towing resistance. Commercial suitability of the gear for efficient harvesting of demersal fish resources of the region is discussed.

Approaches to the evaluation and management of the fish stock in Kainji Lake, Nigeria

Estimates of potential yield for Kainji Lake, and the methods of analysis by earlier workers are discussed. Also summarized is the state of the fishery after impoundment, between 1969 and 1971, based on experimental gillnet catches. Recent sampling of the young of the year along the littoral margin indicates that most of the commercially important species have spawned successful1y in the lake. An intense fishing mortality of juvenile fish, owing to the use of small mesh nets by local fishermen, presents a possible threat to the future establishment of the fish in the lake. The results of gill-net selection studies based on HOLT'S (1957) method are given. The data have been extracted from experimental gill-net catches with graded fleets of nets between 1969 and 1971. Recommendations based on the above studies have been made to ensure a successful establishment of the fish species in the lake and an increase in catch-per~unit effort in subsequent years.

Observations on the influences of codend mesh size on bottom trawl catches in Lake Victoria, with emphasis on the Haplochromis population

Codends of four different mesh size" were compared during exploratory bottom trawling on Lake Victoria. Small mesh sizes (19 and 38 mm) generally caught greater quantities of fish than large mesh sizes (64 and 76 mm) with haplochromis species responsible for the difference. The differences in catch rates were most pronounced where dense concentration of small haplochromis were found. This was generally in shallow water since the average size of haplochromis tends to increase with depth. Catch rates for species other than haplochromis were fairly similar for the codends tested, although there were indications of lower catches in small mesh coderlds fished through dense haplochromis concentrations. For haplochromis fished with 64 and 38 mm eodends, the estimated 50% retention lengths were 13.6 and 8.0 cm, respectively. The predicted value for the 19 mm codend was 4.5 cm.

The impact of gillnet mesh sizes on Oreochromis niloticus: a proposed management strategy

Gillnets are popularly used in commercial fishing on both Lake kioga and lake Victoria. On Lake kioga the legal mesh size is from 4½ (114) upwards while on Lake Victoria, a multifishery lake, various mesh sizes are in operation. However, the fishermen on these lakes still use the smaller meshes to be able to harvest certain categories of fish especially Oreochromis species group whose catch rates are already on the decline due to either use of small mesh size nets, high fishing pressure and to L.Kioga in particular, predation by lates niloticus.