A preliminary investigation into the effect of different storage methods on the keeping quality of smoked Oreochromis niloticus

The study was carried out to asses the nutritional qualities of smoked O. niloticus and to discover the best methods of storage to minimize spoilage and infestation of smoked fish. Result showed that the protein contents in A and D decreased while the protein contents of b and C increased. The lipid content increased only in A while it decreased in B-C and D. The moisture content generally increased over the period of storage and there was an increase in ash content only in C while it decreased in A, B and D. The samples packed in polythene bag suffered about 35% mould infection and a few were attached by rodents with some fouling. Samples packed in jute bag were in good condition but were slightly attached by insect. All samples packed in carton and basket were still in good state but there were insect attack in those packed in carton

Performance of Typha australis cut at three different heights

The response of Typha australis to stem cut at three different heights was studied for four weeks. This was carried out in the field between August and September 2003. Matured Typha australis naturally occuring along the stream within the Institute Integrated Fish Pond Complex, New Bussa were randomly selected. The shoots were cut at 10cm, 20cm, and 30cm, above the soil level. The responses of the plant were assessed. Plant cut at 10cm showed re-growth for one week and later died, while those cut at 20cm and 30cm showed re-growth through out the period of experiment. Result showed previous height between 10cm and 20cm is significant (P>0.05) between 10cm and 30cm height re-growth rates. But plant cut at 20cm and 30cm showed no significant (P>0.05), in height. The results show the susceptibility of Typha australis to stem cut at 10cm or below. Typha australis cut at 10cm above soil level are not likely to survival

Evaluation of the body burdens of heavy metals in five commercially important fishes from different locations in Kainji Lake

The level and distribution of some heavy metals viz Cadmium, Lead, Copper Zinc, and Cobalt in five commercially important fishes, water and sediments at three different locations in Kainj Lake were determined using standard methods. The results show that the ranges of heavy metals mu g/g in fishes in Dam site Laotian are: Cd (0.05~c0.01-20~c01), (Pb(ND-1.12 plus or minus )1), Cu (0.81~c25-2.93~c06), Zn (20.89 arrow right .15-36.78~c2.97), Co(0.08~c01-0.27~c02); in cover Dam, the ranges are Cd (0.04~c02-0.16~c0.2), Pb (nd-02~c01), Cu(0.75~c05-2.61~c13), Zn(15.70~c1.55-32.23~c2.70), Co(0.04~c02-0.25~c0.01) and in Yuna they are Cd (0.05~c01-0.14~c02), Pb (nd-0.32~c01), Cu (0.23~c07-2.70~c05), Zn(15.50 plus or minus `.35-25.62~c2.47), Co(0.07~c02-23~c0.01). The metals concentration (mg/l) in the water sample from Dam site, cover dam and Yuna respectively are Cd(0.007~c001,. 004~c001 and 0.005~001), Pb(013~c001, ND and ND), Cu(.055~c008.030~c007, 05 plus or minus .010), Zn(0.13~c01, 0.060 plus or minus .0055) and Co (.026 plus or minus .022 plus or minus .004, .024 plus or minus .004), while the metals concentration ( mu g/g) in sediments sample from Dam site, cover dam and Yuna are respectively Cd(.05 plus or minus .01, .02 plus or minus .01), Pb(16.00~c1.00, ND and 9.33~c1.01), Cu(24.00~c1.34, 4.26 plus or minus .91 and 11.08~c1.32), Zn(42.00~c1.00, 35~c10 and 38.00 plus or minus .45), Co(15.00~c1.17, 8.69~c1.21 and 10.91~c44). The concentrations of the tested heavy metals are within the acceptable standards of WHO (1987a)

Assessing the quality of water quality assessments: An analytical quality control protocol for benthic diatoms

In this paper, the background to the development of an analytical quality control procedure for the Trophic Diatom Index (TDI) is explained, highlighting some of the statistical and taxonomic problems encountered, and going on to demonstrate how the system works in practice. Most diatom-based pollution indices, including the TDI, use changes in the relative proportions of different taxa to indicate changing environmental conditions. The techniques involved are therefore much simpler than those involved in many studies of phytoplankton, for example, where absolute numbers are required.

A simple approach for the estimation of food consumption from growth rates at different environmental conditions and its application to juvenile cod (Gadus morhua L.) of a fjordic sea loch on the west coast of Scotland

Abstract Growth and condition of fish are functions of available food and environmental conditions. This led to the idea of using fish as a “consumption sensor” for the measurement of food intake over a defined period of time. A bio-physical model for the estimation of food consumption was developed based on the von Bertalanffy model. Whereas some of the input variables of the model, the initial and final lengths and masses of a fish and the temperature within the time period considered can easily be measured, internal characteristics of the species have to be determined indirectly. Three internal parameters are used in the model: the maintenance consumption at 0°C, the temperature dependence of this consumption and the food efficiency, the percentage of the ingested food utilized. Estimates of the parameters for a given species can be determined by feeding experiments. Here, data from published feeding experiments on juvenile cod, Gadus morhua L., were used to validate the model. The average of the relative error for the food intake predicted by the model for individual fish was about 24 %, indicating that fish used the food with different efficiencies. However, grouping the fish according to size classes and temperature lowered the relative error of the predicted food intake for the group to typically 5 %. For a group containing all fish of the feeding experiment the relative prediction error was about 2 %. Zusammenfassung Wachstum und Kondition der Fische sind von der verfügbaren Nahrung und von Umweltbedingungen abhängig. Dies führte zur Idee, Fisch als „Konsum-Sensor“ für die Messung der Nahrungsaufnahme über einen definierten Zeitraum zu verwenden. Auf Grundlage des von Bertalanffy-Modells wurde ein bio-physikalisches Modell zur Schätzung der Futteraufnahme entwickelt. Während einige der Eingangsgrößen des Modells leicht gemessen werden können (Anfangs- und Endlänge und -körpermasse der Fische und die Temperatur innerhalb des betrachteten Zeitraum), können interne Parameter der betrachteten Art nur indirekt bestimmt werden. Drei interne Parameter werden in dem Modell verwendet: Die Erhaltungskonsumtion bei 0° C, die Temperaturabhängigkeit dieser Rate und der Wirkungsgrad der Nahrung (der Anteil der Nahrung ,der aufgenommen und verwendet und nicht ungenutzt wieder ausgeschieden wird). Die Modellparameter für eine bestimmte Art können durch Fütterungsversuche bestimmt werden. Um das Modell zu validieren wurden Daten aus veröffentlichten Fütterungsversuchen mit juvenilen Kabeljau (Gadus morhua L.) verwendet. Modell und Wirklichkeit weichen in der Regel voneinander ab. Der durchschnittliche relative Fehler der durch das Modell vorhergesagten Nahrungsaufnahme betrug für Einzelfische etwa 24%, was darauf hinweist, dass einzelne Fisch die Nahrung mit unterschiedlichen Wirkungsgraden verwerten. Allerdings senkte die Gruppierung der Fische nach Größenklassen und Temperatur den relativen Vorhersagefehler für die Nahrungsaufnahme der Gruppe auf etwa 5%. Für alle Fische im Fütterungsversuch ist der relative Vorhersagefehler etwa 2%.

Different patterns of uptake and depuration of cadmium by periphyton community and a grazer species (Physa sp.): A mesocosm evalution

Widespread pollution by heavy metals generated by various industries has serious adverse effects on human health and the environment. Cadmium is a heavy metal recognised as one of the most hazardous environmental pollutants. It is a non-essential and non-beneficial element to organisms, causing toxicity and other deleterious effects on various components of the aquatic environment. The ability of algal periphyton to concentrate cadmium from fresh water is well known. Moreover, periphyton communities are able to accumulate large amounts of cadmium despite its low concentration in fresh water. Many researchers use algal periphyton as an indicator of water quality in aquatic environments. In the present study, the authors ask two basic questions: Does cadmium accumulate along a food chain consisting of the periphyton community and a grazer species (Physa sp.) under semi-natural conditions provided by artificial streams? If not, which one can better indicate the water quality?

Individual weight, development time and yield of different stages of Tropodiaptomus incognitus (Crustacea: Copepoda). [Translation from: Cahiers ORSTOM, Serie Hydrobiologie 4(1) 63-70, 1970. ]

Observations of individual weight, duration of development and production of different stages of Tropodiaptomus incognitus are presented. The study is based on data gathered from Lake Chad in 1968.

Feeding of Gammarus lacustris Sars under different conditions of habitation [Translation from: [Trophic relations of freshwater invertebrates.] (ed. G. G. Vinberg) pp.94-98. Leningrad, Zool.Inst.AN SSSR, 1980]

The amphipod Gammarus lacustris, a regular representative of lacustrine communities, often plays a significant role in the transformation of matter and energy. The object of the present work was to clarify the quantitative side of the feeding of the amphipod under different conditions of habitation. Experimental works on determination of the rate of consumption of food and its dependence on body-weight were carried out in the summer periods 1975-1978 on three water-bodies of the Krasnoyarsk region, of different conditions of habitation for the amphipods.

Aspects of the washout of salmonid eggs. 3. Observations on the settlement of artifical eggs in a section of natural stream channel at several different discharges

It is of value to know the approximate distance of travel at different stream discharges and/or water velocities, of salmonid eggs which have been displaced from redds by spates. This report describes studies in 20 m of stream channel upstream of the fish trap in Dubby Sike. Observations were made on the relation- ships between discharge and water depth and velocity and also on the relationships between water velocity and the settlement of artificial trout eggs. The main aim was to test the hypothesis that, at any given water velocity, eggs would drift smaller distances in a natural stream than in the experimental channels.

Aspects of the washout of salmonid eggs. 4. Effects of a standard mechanical shock, applied at different stage of development, upon survival and development of eggs of brown trout (Salmo trutta L.)

It is generally accepted by fish culturists that salmonid eggs are sensitive to mechanical shock and that the sensitivity varies with the stage of development of the eggs. In general, the period of greatest sensitivity is thought to occur between fertilization and ”eyeing”. However, it is reasonable to expect that, during a period (perhaps of several hours) following fertilization, sensitivity will be low because in nature during this period the eggs may be subject to some mechanical shock caused by the parent fish covering them with gravel. In 1983-4 and 1984-5 experiments were performed on brown trout (Salmo trutta L.) eggs to examine the effect of a standard mechanical shock (c. 2,500 eggs in 1983-4 and c. 8,400 eggs in 1984-5) at various stages of development upon survival to hatching and time of hatching.The results of these experiments are reported in this study.

Corroborative studies on the effects of sample variation on three macroinvertebrate biological assessment methods at different water quality states

In recent collaborative biological sampling exercises organised by the Nottingham Regional Laboratory of the Severn-Trent Water Authority, the effect of handnet sampling variation on the quality and usefulness of the data obtained has been questioned, especially when this data is transcribed into one or more of the commonly used biological methods of water quality assessment. This study investigates if this effect is constant at sites with similar typography but differing water quality states when the sampling method is standardized and carried out by a single operator. An argument is made for the use of a lowest common denominator approach to give a more consistent result and obviate the effect of sampling variation on these biological assessment methods.

The ecological impact of different mechanisms of chronic sub-lethal toxicity on feeding and respiratory physiology

Sub-lethal toxicity tests, such as the scope-for-growth test, reveal simple relationships between measures of contaminant concentration and effect on respiratory and feeding physiology. Simple models are presented to investigate the potential impact of different mechanisms of chronic sub-lethal toxicity on these physiological processes. Since environmental quality is variable, even in unimpacted environments, toxicants may have differentially greater impacts in poor compared to higher quality environments. The models illustrate the implications of different degrees and mechanisms of toxicity in response to variability in the quality of the feeding environment, and variability in standard metabolic rate. The models suggest that the relationships between measured degrees of toxic stress, and the maintenance ration required to maintain zero scope-for-growth, may be highly nonlinear. In addition it may be possible to define critical levels of sub-lethal toxic effect above which no environment is of sufficient quality to permit prolonged survival.

Aspects of mineral composition of male and female Heterobranchus bidorsalis adults exposed to different concentrations of Bonny-light crude oil

Studies were carried out to assess some macro and trace elements of mineral composition of the male and female Heterobranchus bidorsalis adults exposed to graded concentrations (1.00-8.00m/L-1) of Bonny-light crude oil (BLCO). The experiment was monitored for 4 days (toxicity) and 42days (recovery) periods. Significant decreases (P < 0.05)in the sodium (Na), potassium (K), magnesium (Mg), calcium (Ca), phosphorus (P), zinc (Zn), iron (Fe), vanadium (Va), lead (Pb) and manganese (Mn) contents of the male H. bidorsalis corresponded with the increasing concentrations of BLCO. In contrast, the female fishes recorded significant increases (P < 0.05) in the values of the above elements in their tissues as the concentrations of BLCO increased. Furthermore, the values of Na, K, Mg, Ca, P, Zn, Fe, Va, Pb and Mn recorded in the male fishes where generally lower than those of their female counterparts and the control fish. Increased values of these elements were also recorded during the recovery periods (days 14, 28 and 42) of this study in the magnitudes of 15% at day 14, 20% at day 28 and 20% at day 42. This implied that the removal of crude oil stress during this period improved the quantity of these minerals deposited in the fish tissues. The highest percent proportion of Zn and the lowest proportion of Pb recorded in both male and female H. bidorsalis adults agreed with the report of other workers for other fish species. KEYWORDS: Heterobranchus bidorsalis, Mineral composition, Bonny-light crude oil, Toxicity, Recovery.

The durability of different fish cage materials and the pros and cons of cage rotation

The procedures described are standard methods used in the European Union to quantify wood quality. Samples used here were smaller than the standards laid down in the DIN system (12 x 12 x 16 cm) as Litsea is a small tree and planks of the required size are unobtainable. The use of quality sized samples means that the results presented here can be compared with each other but unfortunately not with data in the literature. Wood is dried first at ambient temperature in the shade to reduce moisture content to an even 11-12%. Part of the sample was then oven-dried to 0% moisture content and its specific density determined by weighing a subsample of 128 cm super(3) (4 x 4 x 8 cm). Strength of expansion of the wood is determined as the percentage by which the wood sample can be pulled apart parallel and vertical to the grain before it breaks. Compression and bending strengths and elasticity are measured by compressing, bending and pulling wood sample in a machine specially designedto determine the forces required.