Cathodic protection of the hulls of fishing trawlers in India

Nearly 10,000 mechanised fishing trawlers mostly built of wood and about 100 trawlers built of steel besides a few fiberglass reinforced plastic and a couple of ferro-cement boats constitute the modern fishing fleet of India at present. Metallic corrosion in sea water is a very well-known phenomenon in all ships and various other marine structures; the exact financial loss and the material breakdowns have never been fully realized among the trawler owners in India. The Central Institute of Fisheries Technology at Cochin has been studying these problems for some years and has been able to assess the significance of underwater corrosion particularly of the hull below water line in the trawlers and suitable remedial measures have been suggested in this paper.

Studies on maturation, spawning, fecundity and sex ratio in Barbus (Puntius) sarana (Hamilton-Buchanan) from Lake Kolleru, Andhra Pradesh

Barbus sarana contains only one batch of mature ova in the mature ovaries to be spawned in one spawning act. It spawns during July-September. The fecundity ranges from 11,201 to 224,248 ova. There is a positive curvilinear correlation between total length and fecundity, the latter increasing with length at a rate of less than cube of length. The stock of this species from Lake Kolleru appears to be more fecund than that inhabiting Loni reservoir. The sex ratio indicates that females outnumber males in all months and in larger length groups. Females appear to reach a larger length than males.

Biology of fouling in Neendakara port, a tropical estuary in the south west coast of India

Species composition and some aspects of the biology of the fouling community in Neendakara port (southwest coast of India) has been examined for a period of one year. Fouling organisms were collected with a system of glass panels exposed for varying durations and during different months in the port. One species of sponge, nine species of coelenterates, thirteen species of polyzoans, four species of mud-tube dwelling polychaetes, four species of serpulids, one species each of mud-tube forming amphipod and tanaid, two species of oysters, six species of mussels and not less than eight species of tunicates were the macro fouler which settled over the panels. Monthly and seasonal settlement of the different species has been recorded. Fouling has been a continuous process occurring throughout the year in Neendakara port with slightly fluctuating biomass and considerably varying species composition. Alternate species dominance of marine and brackish water forms has been an important feature of fouling in the area. Number of species of the sedentary fouling animals represented on test panels has been high during the highly saline pre-monsoon period and low during the monsoon period.

Survey on the idle capacity of fish processing (freezing) plants in India - 1. West Coast

The extent of idle capacity in fish processing (freezing) plants estimated by stratified random sampling is reported. The estimates for 1978 and 1979 for the processing plants on the west coast of India were 76.9 % and 73.2 % respectively at the rate of 250 working days per annum and two shifts per day. The percentage error of estimates worked out to 6.04 for 1978 and 6.98 for 1979. Substantial under utilization of processing plants noticed in all the states accounts mainly to the non-availability of raw material (prawn), high cost of production and shortage of power.

Influence of sex, spawning, starvation and water temperature on fatty acid composition in Tilapia mossambica

The influence of sex, spawning, starvation and water temperature on the fatty acid composition of Tilapia mossambica has been studied. Tilapia egg lipid was found to have unusually high percentage of C sub(22:6) fatty acids (9.09%) compared to body and intestinal lipids. The C sub(16:1) acid was much less in the egg lipids (3.5%) whereas it was 11% in the body lipids. There was no significant difference in the fatty acid composition of body and intestinal lipids of male and female tilapia. Starvation caused the presence of high content of lower fatty acids (C sub(6), C sub(8), C sub(30), C sub(12) and C sub(33)) in the body lipids. Water temperature also influenced the fatty acid composition of Tilapia; the difference was more significant in body lipids than in intestinal lipids.

Survey on the idle capacity of fish processing (freezing) plants in India - 2. East coast

The extent of idle capacity in the fish processing (freezing) plants in the east coast of India estimated by stratified random sampling and the factors responsible for the same are reported. The estimates of idle capacity of fish processing plants in the east coast for the years 1978 and 1979 were respectively 75.9% and 72.5% on the basis of 250 working days per annum and double shift per day. The percentage errors of estimates worked out to 6.9 for 1978 and 4.7 for 1979. The corresponding figures were worked out on the basis of 200 working days also. Substantial under-utilisation of plants in all the maritime states in the east coast accounted mainly to non-availability of raw material, high cost of production, shortage of power, scarcity of ice and potable water during peak season and frequent labour troubles.

Observations on the parasites and associates of wood boring molluscs and crustaceans of the south-west coast of India

An interesting assemblage of commensalic organisms ranging from Protozoa to Arthropoda has been identified from the wood boring animals (molluscs and crustaceans) from the south-west coast of India. Certain aspects of the general biology of the associated ciliates such as the nature of incidence, division in relation to environmental parameters, survival outside the body of the host and reactions related to the general condition of the host are described. Results are also presented of the tolerance of the rare commensalic hydroid Eutima commensalis to different salinities of the medium.

Isolation of Salmonella roan for the first time in India

The isolation of Salmonella roan for the first time in India is reported.

On the comparative efficiency of "V" shaped and rectangular flat otter boards for trawling off Veraval, north west coast of India

V shaped all steel boards, with their inherent stability to tide over obstacles and mud, interchangeability of starboard and portside boards are found to be superior to conventional flat rectangular boards for bottom trawling. These are cheaper in construction, offer less resistance and give longer service. Comparative trials with the two types of boards showed significant difference in tension between the boards but not in catch or horizontal opening.

Vertical distribution of marine wood boring and fouling organisms from the estuarine areas of the south west coast of India

Vertical distribution of marine wood boring and fouling organisms from three different estuarine areas namely, the Ernakulam channel in the Cochin backwaters, Ayiramthengu in the Kayamkulam Lake and Neendakara in the Asthamudi Lake during the post-monsoon, the pre-monsoon and the monsoon periods is presented. The boring organisms noticed during the present study were Martesia striata, Teredo furcifera, Nausitora hedleyi and Sphaeroma terebrans. The dominant fouling organisms were Balanus amphitrite amphitrite, calcareous worms and Modiolus sp. Algae and diatoms were very common on the sub-tidal panels during the monsoon. The incidence of Teredo, Nausitora and calcareous tube worms were significantly high on the bottom panels. Sphaeroma, Balanus and Modiolus occurred in greater numbers on the intertidal panels.

Length-weight and tail length-total length relationship in Panulirus homarus Linnaeus on the south-west coast of India

Length-weight relationships of Panulirus homarus caught from the Kanniyakumari coast was found to be W=0.000566 L super(2-50). The relationship between tail length and total length was also investigated and compared with that of Panulirus polyphagus. Same relationship did not hold good for the two sexes as in the case of P. polyphagus. For a given tail length, the head length, the total length and the weight appear to be relatively larger for females of small sizes of P. homarus.

Notes on the external sex characters of Chanos chanos Forskal spawners

In the present study, no visible differences between the sexes of C. chanos with reference to external features such as colouration, shape of head, snout and operculum, presence of tubercles or nasal pores, length, size and shape as well as any roughness in the various fins, could be found. However, the anal region of the mature milkfish (sabalo) exhibits discernible anatomical differences in the male and female. The male has two main openings visible externally: the anterior anus and the posterior urogenital opening at the tip of the urogenital papilla. The female has three main openings instead of two: the anteriormost anus, followed by the genital pore and the urinary pore located posterior to the genital pore at the tip of the urogenital papilla. Internal examinations were also made on both sexes. In ripe sabalo, it is easier to distinguish the sexes since milk oozes out of the urogenital pore by pressing the abdomen of the ripe male fish. Gravid females are identified by their distended abdomens.

Effect of different sex ratios of ablated wild-stock Penaeus monodon Fabricius on maturation, fecundity and hatching rates

The study was conducted to determine other sex ratios of ablated wild-stock Penaeus monodon other than the most commonly practiced 1 male: 1 female. Four different sex ratios, 0:1, 1:1, 1:2, and 1:4 male: female were tested in four 4m diameter circular tanks for a period of 55 days. During the first run the 1 male: 2 females ratio gave: (a) the highest percentage of first (42.20%), second (30.00%) and third (33.33%) spawning; and (b) the highest total and average fecundity (3.9 million eggs and 300,692 eggs, respectively). The 1 male: 2 females ratio is recommended on the basis of highest percentage for the first, second and third spawners, total and average fecundity.

Shark long line gear of India

Sharks are mainly harvested with long lines which is less expensive compared to other methods of fishing. Though this is a common gear operated along the coast, the gear in every region has its own peculiarities in construction and rigging. This communication furnishes detailed description of the gear operated in different centres. Suggestions are also offered to improve the gear and methods for enhancing production.

Performance of 25m large mesh demersal trawl off Veraval, north west coast of India

Performance of a 25m large mesh demersal trawl, with 150mm mesh size in the fore parts of the trawl was evaluated in comparison with one boat high opening trawl of the Bay of Bengal Programme (BOBP) with 360 meshes of 160mm mesh size and 25.6m head rope length. An 8.2% increase in catch was obtained by 25m large mesh demersal trawl. The gear is comparatively cheaper, lighter in construction and offered better horizontal spread with significantly lower towing resistance. Commercial suitability of the gear for efficient harvesting of demersal fish resources of the region is discussed.