Analysis of growth layers in the teeth of Tursiops truncatus using light microscopy, microradiography, and SEM

Preliminary results show microradiography and scanning electron microscopy (SEM) to be more accurate methods of accessing growth layer groups (GLGs) in the teeth of Tursiops truncatus than transmitted light microscopy. Microradiography shows the rhythmic deposition of mineral as alternating radiopaque and radiolucent layers. It improves the resolution of GLGs near the pulp cavity in older individuals, better than either SEM or light microscopy. SEM of etched sections show GLGs as ridges and grooves which are easily counted from the micrograph. SEM also shows GLGs to be composed of fine incremental layers of uniform size and number which may allow for more precise age determination. Accessory layers are usually hypomineralized layers within the hypermineralized layer of the GLG and are more readily distinguishable as such in SEM of etched sections and microradiographs than in thin sections viewed under transmitted light. The neonatal line is hypomineralized, appearing translucent under transmitted light, radiolucent in a microradiograph, and as a ridge in SEM. (PDF contains 6 pages.)

Improving pinniped diet analyses through identification of multiple skeletal structures in fecal samples

Marine mammal diet is typically characterized by identifying fish otoliths and cephalopod beaks retrieved from stomachs and fecal material (scats). The use and applicability of these techniques has been the matter of some debate given inherent biases associated with the method. Recent attempts to identify prey using skeletal remains in addition to beaks and otoliths are an improvement; however, difficulties incorporating these data into quantitative analyses have limited results for descriptive analyses such as frequency of occurrence. We attempted to characterize harbor seal (Phoca vitulina) diet in an area where seals co-occur with several salmon species, some endangered and all managed by state or federal agencies, or both. Although diet was extremely variable within sampling date, season, year, and between years, the frequency and number of individual prey were at least two times greater for most taxa when prey structures in addition to otoliths were identified. Estimating prey mass in addition to frequency and number resulted in an extremely different relative importance of prey in harbor seal diet. These data analyses are a necessary step in generating estimates of the size, total number, and annual biomass of a prey species eaten by pinnipeds for inclusion in fisheries management plans.

Gulf menhaden, Brevoortia patronus, Purse Seine Fishery, 1974-85, with a brief discussion of age and size composition of the landings

Routine biostatistical port sampling data and landings records collected from the gulf menhaden purse seine fishery between 1974 and 1985 are updated. During most of the period, a total of 11 menhaden reduction plants operated in Mississippi and Louisiana, and the number of vessels in the purse seine fleet varied from 71 to 82. Total annual landings ranged from 447,100 metric tons in 1977 to the record landings for the fishery of 982,800 metric tons in 1984. Age-I and -2 gulf menhaden annually comprised almost 96% of the landings. Estimated total numbers of menhaden landed varied from 4,510.5 million in 1975 to 11,154.9 million in 1985. Annual mean lengths and weights of sampled fish-at-age showed lillie variation. Nominal or observed fishing effort gradually increased through Ihe 1970s and 1980s, reaching 655,800 vessel-ton-weeks in 1983. (PDF file contains 14 pages.)

Comparative study on the catch efficiency and size selection of entangling nets in Lake Kainji, Nigeria

The relative catch performance and selectively of gillnets and trammel nets were investigated in 12 sampling stations in Lake Kainji, Nigeria. 3 types of nets with dimensions 50mx3m were constructed using 76mm and 178mm meshsizes for two gillnets, 76mm and 178mm meshsizes for the lint and ar mour nets of the trammelnets respectively. All the nets were randomly ganged together to form a fleet of nine nets each, and were set twice in each of the 12 stations which gave a total of 24 fishing operations. A total of 365 fish weighing 88.9kg and belonging to 16 different species were caught in all the nets. The trammelnet had the highest catch by number and weight constituting 60% and 69.22% of the total catch and weight respectively with a relative species Diversity Index of 0.82. This was followed by 76mm gillnet which constituted 38.63% by number, 28.09% by weight, 0.69 relative Species Diversity Index. The 178mm gillnet had the least catch of 1.37% and 2.9% by number and weight respectively with 0.25 relative Species Diversity Index. There was significant difference (P<0.05) in the number and weight of fish caught in the different nets. The minimum selection length for these species caught were the same for each net. The trammel net had a wider selection range that skewed to the right, a higher modal and median length indicating larger individual species being entangled in the net

The effects of brood stock size on the economy of catfish (Clarias anguillaris) fry production using the hormone induced natural breeding technique

89 ripe female brooders of the catfish, Clarias anguillaris (Body wt. Range 150g-1, 200g) were induced to spawn by hormone (Ovaprim) induced natural spawning technique over a period of 10 weeks. Matching ripe males were used for pairing the females at the ratio of two males to a female. Six ranges of brood stock body weights were considered as follows; <200g; 200g-399g; 400g-599g; 600-799g; 800g-999g; > 1000g and the number of fry produced by each female brooder was scored/recorded against the corresponding body weight range. The number of fry per unit quantity of hormone and the cost of production a fry based on the current price of Ovaprim (hormon) were determined so as to ascertain most economic size range. The best and most economic size range was between 400g-599g body weight with about 20,000 fry per ml of hormone and N0.028 per fry, while the females above 1000g gave the poorest results of 9,519 fry per ml of hormone and N0.059 per fry. For optimum production of Clarias anguillaris fry and maximum return on investment female brooders of body weights ranging between 400g-599g are recommended for hormone induced natural breeding exercises

Influence of number of valves on catch composition of a fishing pot trap (Lege) in River Rima, north western Nigeria

Three types of prototype (Lege) traps with different numbers of entrance valves were evaluated in River Rima, north western Nigeria. The traps contained 4,6 and 8 valves, tagged 4-V, 6-V and 8-V respectively. The experiment was carried out in a randomized complete block design with one factor each replicated three times. Data collected on fish diversity, number biomass and sizes were subjected to descriptive statistics and analysis of variance. The results of the catch composition showed close diversity index of 0.86 for 6-V, 0.80 for 8-V and 0.60 for 4-V Lege traps. However, the number (41%) and biomass 48%) of fish caught in the 6-V Lege trap were significantly (P0.05) higher than those caught in the other traps. There was no definite trend in the sizes (length and girth) of fish caught in the traps. On the basis of species diversity, and the number and biomass of fish caught, the 6-V Lege showed preference for adoption than the other two traps. However, further studies are recommended on the appropriate mesh size net for the trap in line with the provisions of fisheries edicts

The effects of brood stock size on the economy of catfish (Clarias anguillaris) fry production using the hormone induced natural breeding technique

89 ripe female brooders of the catfish, Clarias anguillaris (Body wt. Range 150g-1, 200g) were induced to spawn by hormone (Ovaprim) induced natural spawning technique over a period of 10 weeks. Matching ripe males were used for pairing the females at the ratio of two males to a female. Six ranges of brood stock body weights were considered as follows; <200g; 200g-399g; 400g-599g; 600-799g; 800g-999g; > 1000g and the number of fry produced by each female brooder was scored/recorded against the corresponding body weight range. The number of fry per unit quantity of hormone and the cost of production a fry based on the current price of Ovaprim (hormon) were determined so as to ascertain most economic size range. The best and most economic size range was between 400g-599g body weight with about 20,000 fry per ml of hormone and N0.028 per fry, while the females above 1000g gave the poorest results of 9,519 fry per ml of hormone and N0.059 per fry. For optimum production of Clarias anguillaris fry and maximum return on investment female brooders of body weights ranging between 400g-599g are recommended for hormone induced natural breeding exercises

Influence of number of valves on catch composition of a fishing pot trap (Lege) in River Rima, north western Nigeria

Three types of prototype (Lege) traps with different numbers of entrance valves were evaluated in River Rima, north western Nigeria. The traps contained 4,6 and 8 valves, tagged 4-V, 6-V and 8-V respectively. The experiment was carried out in a randomized complete block design with one factor each replicated three times. Data collected on fish diversity, number, biomass and sizes were subjected to descriptive statistics and analysis of variance. The results of the catch composition showed close diversity index of 0.86 for 6-V, 0.80 for 8-V and 0.60 for 4-V Lege traps. However, the number (41%) and biomass (48%) of fish caught in the 6-V Lege trap were significantly (P<0.05) higher than those caught in the other traps. There was no definite trend in the sizes (length and girth) of fish caught in the traps. On the basis of species diversity, and the number and biomass of fish caught, the 6-V Lege showed preference for adoption than the other two traps. However, further studies are recommended on the appropriate mesh size net for the trap in line with the provisions of fisheries edicts

On the methods of determining size/weight characteristics of food organisms of fish. (Determination of the length of Copepoda in larval stages by egg-laying females of the free living freshwater Copepoda). [Translation from: Voprosy Ikhtiologii 14, 182-194, 1960. ]

As is known, copepods play an important role in the nutrition of fish. Therefore with a view to facilitating research on the study of the quantitative side of feeding, there have recently appeared a considerable number of papers devoted to the development of methods for determining the wet. weight of these crustaceans. For the further facilitating of research in the nutrition of fish it would be of great interest to clarify the problem, is there not some kind of rule in the growth of the crustaceans during metamorphosis, and if there is such a rule is it not possible, to determine the length of the larvae at each stage, not by measuring them, but by using the formulae derived on the basis of these rules. This article examines the growth curves of different species of freshwater Copepoda, obtained on the basis of experimental observations in cultures or by way of measurement of mass material at all stages of development in samples from water-bodies. The authors study in particular the ratio of the mean diameter of the eggs to the mean length of the egg-bearing females.

The relationship between boat size and fish catches in the gillnet fishery of Lake Victoria, Uganda

The number and size composition of gillnets, fishing grounds, and the quantity and composition of fish catches were related to the size of fishing boat. The overall number of gillnets per boat increased from 20.9 + or - 2.3 nets in 5-6 m long boats to 88.6 + or - 11.8 nets in 11-12 m long boats. The proportion of large mesh sizes, + or more than 127 mm, also increased from 40% in 5-6 m long boats to 100% in boats longer than 10 m. Fish catches are related to the size of boat and this should be considered when formulating management guidelines of the lake's fishery. Promotion of large fishing boats 8 m or longer and restriction on the number and/or mesh size of gillnets of smaller boats could increase ecological and socio-economic benefits.

Reconstruction of original body size and estimation of allometric relationships for the longfin inshore squid (Loligo pealeii) and northern shortfin squid (Illex illecebrosus)

Quantification of predator-prey body size relationships is essential to understanding trophic dynamics in marine ecosystems. Prey lengths recovered from predator stomachs help determine the sizes of prey most influential in supporting predator growth and to ascertain size-specific effects of natural mortality on prey populations (Bax, 1998; Claessen et al., 2002). Estimating prey size from stomach content analyses is often hindered because of the degradation of tissue and bone by digestion. Furthermore, reconstruction of original prey size from digested remains requires species-specific reference materials and techniques. A number of diagnostic guides for freshwater (Hansel et al., 1988) and marine (Watt et al., 1997; Granadeiro and Silva, 2000) prey species exist; however they are limited to specific geographic regions (Smale et al., 1995; Gosztonyi et al., 2007). Predictive equations for reconstructing original prey size from diagnostic bones in marine fishes have been developed in several studies of piscivorous fishes of the Northwest Atlantic Ocean (Scharf et al., 1998; Wood, 2005). Conversely, morphometric relationships for cephalopods in this region are scarce despite their importance to a wide range of predators, such as finfish (Bowman et al., 2000 ; Staudinger, 2006), elasmobranchs (Kohler, 1987), and marine mammals (Gannon et al., 1997; Williams, 1999).

Estimating species and size composition of rockfishes to verify targets in acoustic surveys of untrawlable areas

Rockfish (Sebastes spp.) biomass is difficult to assess with standard bottom trawl or acoustic surveys because of their propensity to aggregate near the seafloor in highrelief areas that are inaccessible to sampling by trawling. We compared the ability of a remotely operated vehicle (ROV), a modified bottom trawl, and a stereo drop camera system (SDC) to identify rockfish species and estimate their size composition. The ability to discriminate species was highest for the bottom trawl and lowest for the SDC. Mean lengths and size distributions varied among the gear types, although a larger number of length measurements could be collected with the bottom trawl and SDC than with the ROV. Dusky (S. variabilis), harlequin (S. variegatus), and northern rockfish (S. polyspinis), and Pacific ocean perch (S. alutus) were the species observed in greatest abundance. Only dusky and northern rockfish regularly occurred in trawlable areas, whereas these two species and many more occurred in untrawlable areas. The SDC was able to resolve the height of fish off the seafloor, and some of the rockfish species were observed only near the seafloor in the acoustic dead zone. This finding is important, in that fish found exclusively in the acoustic dead zone cannot be assessed acoustically. For these species, methods such as bottom trawls, long-lines, or optical surveys using line transect or area swept methods will be the only adequate means to estimate the abundance of these fishes. Our results suggest that the selection of appropriate methods for verifying targets will depend on the habitat types and species complexes to be examined.

Population structure and variance effective size of red snapper (Lutjanus campechanus) in the northern Gulf of Mexico*

We assayed allelic variation at 19 nuclear-encoded microsatellites among 1622 Gulf red snapper (Lutjanus campechanus) sampled from the 1995 and 1997 cohorts at each of three offshore localities in the northern Gulf of Mexico (Gulf). Localities represented western, central, and eastern subregions within the northern Gulf. Number of alleles per microsatellite per sample ranged from four to 23, and gene diversity ranged from 0.170 to 0.917. Tests of conformity to Hardy-Weinberg equilibrium expectations and of genotypic equilibrium between pairs of micro-satellites were generally nonsignificant following Bonferroni correction. Significant genic or genotypic heterogeneity (or both) among samples was detected at four microsatellites and over all microsatellites. Levels of divergence among samples were low (FST ≤0.001). Pairwise exact tests revealed that six of seven “significant” comparisons involved temporal rather than spatial heterogeneity. Contemporaneous or variance effective size (NeV) was estimated from the temporal variance in allele frequencies by using a maximum-likelihood method. Estimates of NeV ranged between 1098 and >75,000 and differed significantly among localities; the NeV estimate for the sample from the northcentral Gulf was >60 times as large as the estimates for the other two localities. The differences in variance effective size could ref lect differences in number of individuals successfully reproducing, differences in patterns and intensity of immigration, or both, and are consistent with the hypothesis, supported by life-history data, that different “demographic stocks” of red snapper are found in the northern Gulf. Estimates of NeV for red snapper in the northern Gulf were at least three orders of magnitude lower than current estimates of census size (N). The ratio of effective to census size (Ne/N) is far below that expected in an ideal population and may reflect high variance in individual reproductive success, high temporal and spatial variance in productivity among subregions or a combination of the two.

Blue Crab, Callinectes sapidus, Trap Selectivity Studies: Mesh Size

Catch rates and sizes of blue crabs, Callinectes sapidus, were compared in traps with 2.54 cm (1.0 inch), 3.81 cm (1.5 inches), and 5.08 cm (2.0 inches) square mesh, 2.54 by 5.08 cm rectangular mesh, and 3.81 cm hexagonal mesh. Catch of legal blue crabs by number was significantly greater in the traditional hexagonal mesh trap than in all other trap types. Sublegal catch by number was highest (34.1-63.3% of total) in the 2.54 cm and 3.81 cm square mesh and rectangular mesh traps and lowest in the 5.08 cm square mesh trap. The hexagonal mesh trap had significantly lower catch rates of sublegal blue crabs than all other trap types except the 5.08 cm square mesh. Mean size of blue crabs by trap type exhibited an inverse pattern to that shown by catch of sublegal crabs. The most effective trap to maximize legal catch and minimize sublegal catch was the 3.81 cm hexagonal mesh trap followed by the 5.08 cm square mesh trap.

The Effects of Fish Trap Mesh Size on Reef Fish Catch off Southeastern Florida

Catch and mesh selectivity of wire-meshed fish traps were tested for eleven different mesh sizes ranging from 13 X 13 mm (0.5 x 0.5") to 76 x 152 mm (3 X 6"). A total of 1,810 fish (757 kg) representing 85 species and 28 families were captured during 330 trap hauls off southeastern Florida from December 1986 to July 1988. Mesh size significantly affected catches. The 1.5" hexagonal mesh caught the most fish by number, weight, and value. Catches tended to decline as meshes got smaller or larger. Individual fish size increased with larger meshes. Laboratory mesh retention experiments showed relationships between mesh shape and size and individual retention for snapper (Lutjanidae), grouper (Serranidae), jack (Carangidae), porgy (Sparidae), and surgeonfish (Acanthuridae). These relationships may be used to predict the effect of mesh sizes on catch rates. Because mesh size and shape greatly influenced catchability, regulating mesh size may provide a useful basis for managing the commercial trap fishery.