Tn5/IS50 target recognition

This communication reports an analysis of Tn5/IS50 target site selection by using an extensive collection of Tn5 and IS50 insertions in two relatively small regions of DNA (less than 1 kb each). For both regions data were collected resulting from in vitro and in vivo transposition events. Since the data sets are consistent and transposase was the only protein present in vitro, this demonstrates that target selection is a property of only transposase. There appear to be two factors governing target selection. A target consensus sequence, which presumably reflects the target selection of individual pairs of Tn5/IS50 bound transposase protomers, was deduced by analyzing all insertion sites. The consensus Tn5/IS50 target site is A-GNTYWRANC-T. However, we observed that independent insertion sites tend to form groups of closely located insertions (clusters), and insertions very often were spaced in a 5-bp periodic fashion. This suggests that Tn5/IS50 target selection is facilitated by more than two transposase protomers binding to the DNA, and, thus, for a site to be a good target, the overlapping neighboring DNA should be a good target, too. Synthetic target sequences were designed and used to test and confirm this model.

TnTIN and TnTAP: Mini-transposons for site-specific proteolysis in vivo

Tobacco etch virus (TEV) protease recognizes a 7-aa consensus sequence, Glu-Xaa-Xaa-Tyr-Xaa-Gln-Ser, where Xaa can be almost any amino acyl residue. Cleavage occurs between the conserved Gln and Ser residues. Because of its distinct specificity, TEV protease can be expressed in the cytoplasm without interfering with viability. Polypeptides that are not natural substrates of TEV protease are proteolyzed if they carry the appropriate cleavage site. Thus, this protease can be used to study target proteins in their natural environment in vivo, as well as in vitro. We describe two Tn5-based mini-transposons that insert TEV protease cleavage sites at random into target proteins. TnTIN introduces TEV cleavage sites into cytoplasmic proteins. TnTAP facilitates the same operation for proteins localized to the bacterial cell envelope. By using two different target proteins, SecA and TolC, we show that such modified proteins can be cleaved in vivo and in vitro by TEV protease. Possible applications of the site-specific proteolysis approach are topological studies of soluble as well as of inner and outer membrane proteins, protein inactivation, insertion mutagenesis experiments, and protein tagging.

The insect endosymbiont Sodalis glossinidius utilizes a type III secretion system for cell invasion

Sodalis glossinidius is a maternally transmitted secondary endosymbiont residing intracellularly in tissues of the tsetse flies, Glossina spp. In this study, we have used Tn5 mutagenesis and a negative selection procedure to derive a S. glossinidius mutant that is incapable of invading insect cells in vitro and is aposymbiotic when microinjected into tsetse. This mutant strain harbors Tn5 integrated into a chromosomal gene sharing high sequence identity with a type III secretion system invasion gene (invC) previously identified in Salmonella enterica. With the use of degenerate PCR, we have amplified a further six Sodalis inv/spa genes sharing high sequence identity with type III secretion system genes encoded by Salmonella pathogenicity island 1. Phylogenetic reconstructions based on the inv/spa genes of Sodalis and other members of the family Enterobacteriaceae have consistently identified a well-supported clade containing Sodalis and the enteric pathogens Shigella and Salmonella. These results suggest that Sodalis may have evolved from an ancestor with a parasitic intracellular lifestyle, possibly a latter-day entomopathogen. These observations lend credence to a hypothesis suggesting that vertically transmitted mutualistic endosymbionts evolve from horizontally transmitted parasites through a parasitism–mutualism continuum.

Further Studies of the Role of Cyclic β-Glucans in Symbiosis. An ndvC Mutant of Bradyrhizobium japonicum Synthesizes Cyclodecakis-(1→3)-β-Glucosyl1

The cyclic β-(1→3),β-(1→6)-d-glucan synthesis locus of Bradyrhizobium japonicum is composed of at least two genes, ndvB and ndvC. Mutation in either gene affects glucan synthesis, as well as the ability of the bacterium to establish a successful symbiotic interaction with the legume host soybean (Glycine max). B. japonicum strain AB-14 (ndvB::Tn5) does not synthesize β-glucans, and strain AB-1 (ndvC::Tn5) synthesizes a cyclic β-glucan lacking β-(1→6)-glycosidic bonds. We determined that the structure of the glucan synthesized by strain AB-1 is cyclodecakis-(1→3)-β-d-glucosyl, a cyclic β-(1→3)-linked decasaccharide in which one of the residues is substituted in the 6 position with β-laminaribiose. Cyclodecakis-(1→3)-β-d-glucosyl did not suppress the fungal β-glucan-induced plant defense response in soybean cotyledons and had much lower affinity for the putative membrane receptor protein than cyclic β-(1→3),β-(1→6)-glucans produced by wild-type B. japonicum. This is consistent with the hypothesis presented previously that the wild-type cyclic β-glucans may function as suppressors of a host defense response.

The chaperone/usher pathways of Pseudomonas aeruginosa: Identification of fimbrial gene clusters (cup) and their involvement in biofilm formation

Pseudomonas aeruginosa, an important opportunistic human pathogen, persists in certain tissues in the form of specialized bacterial communities, referred to as biofilm. The biofilm is formed through series of interactions between cells and adherence to surfaces, resulting in an organized structure. By screening a library of Tn5 insertions in a nonpiliated P. aeruginosa strain, we identified genes involved in early stages of biofilm formation. One class of mutations identified in this study mapped in a cluster of genes specifying the components of a chaperone/usher pathway that is involved in assembly of fimbrial subunits in other microorganisms. These genes, not previously described in P. aeruginosa, were named cupA1–A5. Additional chaperone/usher systems (CupB and CupC) have been also identified in the genome of P. aeruginosa PAO1; however, they do not appear to play a role in adhesion under the conditions where the CupA system is expressed and functions in surface adherence. The identification of these putative adhesins on the cell surface of P. aeruginosa suggests that this organism possess a wide range of factors that function in biofilm formation. These structures appear to be differentially regulated and may function at distinct stages of biofilm formation, or in specific environments colonized by this organism.

Endogenous mutagenesis by an insertion sequence element identifies Aeromonas salmonicida AbcA as an ATP-binding cassette transport protein required for biogenesis of smooth lipopolysaccharide.

Analysis of an Aeromonas salmonicida A layer-deficient/O polysaccharide-deficient mutant carrying a Tn5 insertion in the structural gene for A protein (vapA) showed that the abcA gene immediately downstream of vapA had been interrupted by the endogenous insertion sequence element ISAS1. Immunoelectron microscopy showed that O polysaccharides did not accumulate at the inner membrane-cytoplasm interface of this mutant. abcA encodes an unusual protein; it carries both an amino-terminal ATP-binding cassette (ABC) domain showing high sequence similarity to ABC proteins implicated in the transport of certain capsular and O polysaccharides and a carboxyl-terminal potential DNA-binding domain, which distinguishes AbcA from other polysaccharide transport proteins in structural and evolutionary terms. The smooth lipopolysaccharide phenotype was restored by complementation with abcA but not by abcA carrying site-directed mutations in the sequence encoding the ATP-binding site of the protein. The genetic organization of the A. salmonicida ABC polysaccharide system differs from other bacteria. abcA also differs in apparently being required for both O-polysaccharide synthesis and in energizing the transport of O polysaccharides to the cell surface.

Disulfide oxidoreductase activity of Shigella flexneri is required for release of Ipa proteins and invasion of epithelial cells.

Secretion of IpaB, IpaC, and IpaD proteins of Shigella flexneri, essential for the invasion of epithelial cells, requires a number of proteins encoded by the spa and mxi loci on the large plasmid. Introduction of dsbA::Tn5 into S.flexneri from Escherichia coli K-12 reduced invasiveness, which resulted from a decrease in the capacity to release IpaB, IpaC, and IpaD proteins into the external medium. Examination of the surface-presented Ipa proteins of the dsbA mutant, however, revealed Ipa proteins at levels similar to those on wild-type cells. Since the defective phenotype was similar to that of the spa32 mutant of S. flexneri and the Spa32 sequence possessed two Cys residues, the effect of dsbA mutation of the folding structure of Spa32 under reducing conditions and on the surface expression of Spa32 was investigated. The results indicated that Spa32 was a disulfide-containing protein whose correctly folded structure was required for its presentation on the outer membrane. Indeed, replacing either one of the two Cys residues in Spa32 with Ser by site-directed mutagenesis reduced its capacity to release Ipa proteins into the external medium and led to the accumulation of Spa32 protein in the periplasm. These results indicated that the DsbA protein performs an essential function during the invasion of mammalian cells, by facilitating transport of the Spa32 protein across the outer membrane.