Study of PM10 and PM2.5 levels in three European cities: Analysis of intra and inter urban variations

In the present paper, 1-year PM10 and PM 2.5 data from roadside and urban background monitoring stations in Athens (Greece), Madrid (Spain) and London (UK) are analysed in relation to other air pollutants (NO,NO2,NOx,CO,O3 and SO2)and several meteorological parameters (wind velocity, temperature, relative humidity, precipitation, solar radiation and atmospheric pressure), in order to investigate the sources and factors affecting particulate pollution in large European cities. Principal component and regression analyses are therefore used to quantify the contribution of both combustion and non-combustion sources to the PM10 and PM 2.5 levels observed. The analysis reveals that the EU legislated PM 10 and PM2.5 limit values are frequently breached, forming a potential public health hazard in the areas studied. The seasonal variability patterns of particulates varies among cities and sites, with Athens and Madrid presenting higher PM10 concentrations during the warm period and suggesting the larger relative contribution of secondary and natural particles during hot and dry days. It is estimated that the contribution of non-combustion sources varies substantially among cities, sites and seasons and ranges between 38-67% and 40-62% in London, 26-50% and 20-62% in Athens, and 31-58% and 33-68% in Madrid, for both PM10 and PM 2.5. Higher contributions from non-combustion sources are found at urban background sites in all three cities, whereas in the traffic sites the seasonal differences are smaller. In addition, the non-combustion fraction of both particle metrics is higher during the warm season at all sites. On the whole, the analysis provides evidence of the substantial impact of non-combustion sources on local air quality in all three cities. While vehicular exhaust emissions carry a large part of the risk posed on human health by particle exposure, it is most likely that mitigation measures designed for their reduction will have a major effect only at traffic sites and additional measures will be necessary for the control of background levels. However, efforts in mitigation strategies should always focus on optimal health effects.

Time required to stabilize thermographic images at rest

Thermography for scientific research and practical purposes requires a series of procedures to obtain images that should be standardized; one of the most important is the time required for acclimatization in the controlled environment. Thus, the objective of this study was to identify the appropriate acclimatization time in rest to reach a thermal balance on young people skin. Forty-four subjects participated in the study, 18 men (22.3 ± 3.1 years) and 26 women (21.7 ± 2.5 years). Thermographic images were collected using a thermal imager (Fluke ®), totaling 44 images over a period of 20 minutes. The skin temperature (TSK) was measured at the point of examination which included the 0 minute, 2, 4, 6, 8, 10, 12, 14, 16, 18 and 20. The body regions of interest (ROI) analyzed included the hands, forearms, arms, thighs, legs, chest and abdomen. We used the Friedman test with post hoc Dunn?s in order to establish the time at rest required to obtain a TSK balance and the Mann-Whitney test was used to compare age, BMI, body fat percentage and temperature variations between men and women, considering always a significance level of pmenor que0.05. Results showed that women had significantly higher temperature variations than men (pmenor que0.01) along the time. In men, only the body region of the abdomen obtained a significant variance (pmenor que0.05) on the analyzed period, both in the anterior and posterior part. In women, the anterior abdomen and thighs, and the posterior part of the hands, forearms and abdomen showed significant differences (pmenor que0.05). Based on our results, it can be concluded that the time in rest condition required reaching a TSK balance in young men and women is variable, but for whole body analysis it is recommended at least 10 minutes for both sexes.

Los cerramientos verticales de Jean Prouvé variables de intercambio con el exterior

A finales del siglo XIX y principios del XX, la aparición de nuevos materiales, como el acero y el hormigón armado, y la experimentación en procedimientos industriales provocan un cambio en el concepto de cerramiento y en la forma de construir. La fachada se libera y se independiza de la estructura principal, y el nuevo cerramiento debe responder a los principios arquitectónicos y constructivos de este momento. Se busca, por tanto, un cerramiento nuevo. Un cerramiento ligero, de poco peso, de poco espesor, autoportante, multicapa, montado en seco, de grandes dimensiones y que cumpla las exigencias de todo cerramiento. Se puede afirmar que, hasta que Jean Prouvé experimenta con distintos materiales y sistemas de fabricación, la técnica de los cerramientos ligeros no se desarrolla por completo. En sus trabajos se pueden encontrar aplicaciones de los nuevos materiales y nuevas técnicas, e investigaciones sobre prefabricación ligera en acero y aluminio, en un intento de aplicar la producción industrial y en serie a la construcción. Esta Tesis realiza un análisis en profundidad, tanto gráfico como escrito, de los cerramientos verticales desarrollados por Jean Prouvé, sin tratarlos como objetos aislados, entendiendo que forman parte de una obra arquitectónica concreta y completa. Dicho análisis sirve para clasificarlos según las funciones esenciales que debe garantizar un cerramiento: aislar, iluminar, ventilar y proteger, y para comprender cuáles son las claves, los recursos e intenciones, utilizadas por el autor para conseguir este propósito. El resultado de la investigación se plasma de dos formas diferentes. En la primera, se realizan reflexiones críticas para extraer los temas importantes de los elementos analizados, lo que posibilita el acercamiento a otros arquitectos y ampliar el campo de visión. En la segunda, de tipo gráfico, se elabora un atlas de los distintos tipos de cerramientos verticales desarrollados por Jean Prouvé. ABSTRACT In the late nineteenth and the early twentieth century, the appearance of new materials, like steel or reinforced concrete, and the experimentation in industrial procedures cause a change in the concept of façade and in the way of build. The façade is released and become independent of the main structural frame, and the new building enclosure must answer the architectural and construction principles of that moment. A new façade is therefore looked for. A light, thin, self supported, multi layer, dry mounted and big dimensions façade that meet the exigencies of all building enclosure. You can ensure that until Jean Prouvé experiment with several materials and fabrication systems, the light façade technic does not develop completely. In his work we can find new materials applications and new technics and studies about light prefabrication with steel and aluminium, in an attempt of apply the mass production to construction. This Thesis carries out a deep analysis, graphic and written, of the vertical enclosure panels of Jean Prouvé’s work. This is made without studying them like isolated objects, but understanding that they are part of a particular architectural work, as a whole. The analysis is used for classify the panels according to main functions that a façade must satisfy: isolate, light up, ventilate and protect. And also to understand which are the keys, the resources and intentions used by Prouvé to achieve this goal. The result of the research is presented in two different ways. In the first one, a critical reflection is made in order to extract the important issues of the analyzed elements. That makes possible the approach to other architects and gives us a bigger range of vision. In the second, graphic, an atlas of the different types of vertical façade panels of Jean Prouvé is made.

Characterization of rock joints by fractal analysis

From a physical perspective, a joint experiences fracturing processes that affect the rock at both microscopic and macroscopic levels. The result is a behaviour that follows a fractal structure. In the first place, for saw-tooth roughness profiles, the use of the triadic Koch curve appears to be adequate and by means of known correlations the JRC parameter is obtained from the angle measured on the basis of the height and length of the roughnesses. Therefore, JRC remains related to the geometric pattern that defines roughness by fractal analysis. In the second place, to characterise the geometry of irregularities with softened profiles, consequently, is proposed a characterisation of the fractal dimension of the joints with a circumference arc generator that is dependent on an average contact angle with regard to the mid-plane. The correlation between the JRC and the fractal dimension of the model is established with a defined statistical ratio.