Producción de pólvoras salinas por vía húmeda

Valuable black powder has been produced traditionally by the wheel-mill grinding process. It is a process which evolved since the 12th century until his crowning moment ca. 1850. The current system of manufacturing black powder has barely changed in 150 years. This traditional system has and inherent risk of explosion in several stages which is not avoidable. Laws and restrictions are constantly increasing. So do the transportation costs, whatever are his final use. Nowadays the consumer price could be multiplied by easily more than ten times the original production cost. Traditional factories tend to group, merge and move away from settled areas. Obviously this protects the factories from public opinion in case of an accident thus increases the final cost of the propellant. The wet production could allow plants to scatter and decrease production costs. A wet method of production is proposed and developed in this project. The components are mixed in presence of water and extracted with an organic solvent. This conditions insures there is no risk of explosion. The method uses low and cheap technology. Precise calculations are presented among thermodynamic, legal and economic factors. Although the work is based in traditional (KNO3-C-S) black powder, other oxidizers with present interest like are studied. Furthermore, traditional production systems and quality processes are also discussed. Obtener pólvora negra ha sido posible gracias a la producción por vía seca con el molino de ruedas. Es un procedimiento que ha estado en evolución desde el siglo XII hasta su cénit a mediados del siglo XIX. Las producciones actuales utilizan este sistema que apenas ha variado en 150 años. El proceso clásico implica riesgos inherentes e inevitables de explosión en varias de sus etapas. Cada día la legislación es progresivamente más restrictiva con el transporte de explosivos. Las pólvoras, sean usadas para pirotecnia, cartuchería o materiales energéticos, están sujetas a gravámenes por el transporte. Hoy día el precio al consumidor puede llegar a estar multiplicado hasta más de diez veces el coste de producción. Las producciones tradicionales tienden a agruparse y alejarse de las poblaciones. Esto las protege, en caso de accidente, de la opinión pública aunque a costa de encarecer el producto. La producción húmeda es fácilmente escalable y apenas requiere inversión pudiendo dispersar las producciones y abaratar los costes. En este proyecto se propone un sistema de producción de explosivos salinos por vía húmeda, a través de una incorporación acuosa y una extracción con un disolvente orgánico. Las condiciones de operación aseguran que no hay riesgo ninguno de explosión. El sistema utiliza tecnología muy accesible y económica. Se han incorporado cálculos meticulosos además de discutir aspectos termodinámicos, legislativos y económicos. Aunque el trabajo se centra en la pólvora clásica (KNO3-C-S), se estudian alternativas con mayor interés actual. Así mismo se analizan los métodos de producción tradicionales y los efectos sobre la calidad de la pólvora.

Correlation Between Processing Conditions, Microstructure and Mechanical Behavior in Regenerated Silkworm Silk Fibers

Regenerated silkworm fibers spun through a wet-spinning process followed by an immersion postspinning drawing step show a work to fracture comparable with that of natural silkworm silk fibers in a wide range of spinning conditions. The mechanical behavior and microstructure of these high performance fibers have been characterized, and compared with those fibers produced through conventional spinning conditions. The comparison reveals that both sets of fibers share a common semicrystalline microstructure, but significant differences are apparent in the amorphous region. Besides, high performance fibers show a ground state and the possibility of tuning their tensile behavior. These properties are characteristic of spider silk and not of natural silkworm silk, despite both regenerated and natural silkworm silk share a common composition different from that of spider silk.

Fabrication process of Mo/Au TES at RT

We report on the fabrication details of TES based on Mo/Au bilayers. The Mo layer is deposited by radio frequency (RF) sputtering and capped with a sputter deposited thin Au protection layer. Afterwards, a second Au layer of suitable (lower) resistivity is deposited ex‐situ by e‐beam evaporation, until completion of the total desired Au thickness. The deposition was performed at room temperature (RT) on LPCVD Si3 N4 membranes. Such a deposition procedure is very reproducible and allow controlling the critical temperature (Tc) and normal electrical resistance (RN ) of the Mo/Au bilayer. The process is optimized to achieve low stress bilayers, thus avoiding the undesirable curvature of the membranes. Bilayers are patterned using photolithographic techniques and wet etching procedures. Mo superconducting paths are used to contact the Mo/Au bilayers, thus ensuring good electrical conductivity and thermal isolation. The entire fabrication process let to stable and reproducible sensors with required and tunable functional properties