Detection of Biological CO2 and 1,3-Pentadiene Using Non-refrigerated Low-Cost MWIR Detectors

The early detection of spoiling metabolic products in contaminated food is a very important tool to control quality. Some volatile compounds produce unpleasant odours at very low concentrations, making their early detection very challenging. This is the case of 1,3-pentadiene produced by microorganisms through decarboxylation of the preservative sorbate. In this work, we have developed a methodology to use the data produced by a low-cost, compact MWIR (Mid-Wave IR) spectrometry device without moving parts, which is based on a linear array of 128 elements of VPD PbSe coupled to a linear variable filter (LVF) working in the spectral range between 3 and 4.6 ?m. This device is able to analyze food headspace gases through dedicated sample presentation setup. This methodology enables the detection of CO2 and the volatile compound 1,3-pentadiene, as compared to synthetic patrons. Data analysis is based on an automated multidimensional dynamic processing of the MWIR spectra. Principal component and discriminant analysis allow segregating between four yeast strains including producers and no producers. The segregation power is accounted as a measure of the discrimination quality.

PEPSI: Privacy-Enhanced Participatory Sensing Infrastructure.

Participatory Sensing combines the ubiquity of mobile phones with sensing capabilities of Wireless Sensor Networks. It targets pervasive collection of information, e.g., temperature, traffic conditions, or health-related data. As users produce measurements from their mobile devices, voluntary participation becomes essential. However, a number of privacy concerns -- due to the personal information conveyed by data reports -- hinder large-scale deployment of participatory sensing applications. Prior work on privacy protection, for participatory sensing, has often relayed on unrealistic assumptions and with no provably-secure guarantees. The goal of this project is to introduce PEPSI: a Privacy-Enhanced Participatory Sensing Infrastructure. We explore realistic architectural assumptions and a minimal set of (formal) privacy requirements, aiming at protecting privacy of both data producers and consumers. We design a solution that attains privacy guarantees with provable security at very low additional computational cost and almost no extra communication overhead.

Ultra Low Power FPGA-Based Architecture for Wake-up Radio in Wireless Sensor Networks

In this paper the capabilities of ultra low power FPGAs to implement Wake-up Radios (WuR) for ultra low energy Wireless Sensor Networks (WSNs) are analyzed. The main goal is to evaluate the utilization of very low power configurable devices to take advantage of their speed, flexibility and low power consumption instead of the more common approaches based on ASICs or microcontrollers. In this context, energy efficiency is a key aspect, considering that usually the instant power consumption is considered a figure of merit, more than the total energy consumed by the application.

Wake up Radio Architecture for Wireless Sensor Networks Using an Ultra Low Power FPGA

In this paper an implementation of a Wake up Radio(WuR) with addressing capabilities based on an ultra low power FPGA for ultra low energy Wireless Sensor Networks (WSNs) is proposed. The main goal is to evaluate the utilization of very low power configurable devices to take advantage of their speed, flexibility and low power consumption instead of the traditional approaches based on ASICs or microcontrollers, for communication frame decoding and communication data control.

Low-speed longitudinal controllers for mass-produced cars: A comparative study

Four longitudinal control techniques are compared: a classical Proportional-Integral (PI) control; an advanced technique-called the i-PI-that adds an intelligent component to the PI; a fuzzy controller based on human experience; and an adaptive-network-based fuzzy inference system. The controllers were designed to tackle one of the challenging topics as yet unsolved by the automotive sector: managing autonomously a gasoline-propelled vehicle at very low speeds. The dynamics involved are highly nonlinear and constitute an excellent test-bed for newly designed controllers. A Citroën C3 Pluriel car was modified to permit autonomous action on the accelerator and the brake pedals-i.e., longitudinal control. The controllers were tested in two stages. First, the vehicle was modeled to check the controllers' feasibility. Second, the controllers were then implemented in the Citroën, and their behavior under the same conditions on an identical real circuit was compared.

Cadena de valor de papas nativas (Solanum andigenum sp.) en la provincia de Jauja, Perú

La Asamblea General de la ONU, a solicitud del gobierno peruano, declara en el año 2008 el Año Internacional de la Papa, (AIP). Desde el año 2005, el gobierno peruano ha puesto en marcha estrategias en torno a la importancia de la papa, como la declaración del 30 de Mayo como el Día Nacional de la Papa. El año 2014 es declarado por la FAO, (Food and Agriculture Organization of the United Nations), Año Internacional de la Agricultura Familiar, con un enfoque compartido por esta Tesis Doctoral en el apoyo a la familia campesina peruana. El gobierno peruano utiliza las cadenas de valor como una estrategia de promoción de desarrollo sostenible, que ha permitido contribuir a la inclusión social y económica de productores pobres de zonas alto andinas, como las localizadas en la mancomunidad municipal del Yacus, (MMY), provincia de Jauja, departamento de Junín. Esta estrategia, en la que el mercado incorpora a los pequeños agricultores de las zonas altas de los Andes, (que disponen de recursos económicos muy bajos), en procesos productivos rentables, implica una serie de cambios a realizar, como la transformación de los patrones de producción tradicional hacia aquellos productos o servicios que tienen demanda en el mercado, o la variación de la mentalidad del agricultor pequeño hacia una concepción empresarial de su producción. (Fabián, 2013). Por otra parte, la sostenibilidad de las cadenas de valor depende del eslabón más débil, lo que obliga a conocer la situación de todos los eslabones para poder integrar y reforzar la cadena. Se requiere un sistema de transparencia adecuado que facilite el flujo de la información entre los distintos eslabones. (Briz et al., 2012). Además, el establecimiento de la cadena de valor debe hacerse con cuidado, ya que la eficacia y supervivencia de las empresas están cada vez más ligadas a la cadena de valor a la que pertenece y a la coordinación de la misma. (Briz, 2011). En esta situación, adquiere importancia el estudio de la cadena de valor de la papa nativa, para una vez establecidas sus características, poder determinar la viabilidad o no de una cadena de valor de este producto que repercuta parte de la riqueza generada en los pequeños agricultores alto andinos, e incluso, de su extensión hasta España. Existen estudios sobre las papas nativas, realizadas por diferentes universidades de distintos países, e incluso, de diferentes continentes. Sin embargo, la mayoría de los estudios se centran en la mejora de la producción de la papa nativa. La novedad de la investigación realizada en la presente Tesis Doctoral radica en el estudio de la viabilidad de la comercialización de la papa nativa, mediante el establecimiento de una cadena de valor que se inicie en la provincia de Jauja, Perú, y finalice tanto en los mercados peruanos de las regiones de Junín y Lima, como en España. El objetivo planteado en esta investigación es la mejora de las condiciones económicas y sociales de las comunidades agrícolas de la provincia de Jauja en el Perú, así como fomentar su desarrollo tecnológico e industrial, mediante el fomento de la cadena de valor de la papa nativa y sus derivados. Se establecen como objetivos específicos la caracterización de los eslabones de la cadena de valor de la papa nativa y sus derivados en la provincia de Jauja del Perú y en España, de manera que se determine el valor agregado en los mismos; el fortalecimiento de las organizaciones de productores de papas nativas para la comercialización de sus producciones y para el fomento de la cultura empresarial; y el desarrollo de una cadena de comercialización papas nativas y sus derivados con origen en la Provincia de Jauja, Perú, y que finalice en España, con la venta al consumidor español. Para alcanzar estos objetivos la metodología utilizada es la cadena de valor agroalimentaria, utilizando como herramientas de análisis el análisis DAFO de la cadena de valor de la papa nativa. Las fuentes de información primarias utilizadas proceden en parte del proyecto de cooperación de UPM, “Mejora de la cadena de valor de la patata andina como impulso al desarrollo rural. Caso de tres Comunidades Campesinas en la Provincia de Jauja del Perú”, en el que participó el doctorando, y en parte proceden de la batería de encuestas específicamente diseñadas para los diferentes eslabones de la cadena de valor de la papa nativa. Las fuentes de información secundarias proceden de artículos académicos publicados, de artículos publicados por revistas especializadas del sector y de informes realizados por diferentes instituciones gubernamentales, tanto españolas como peruanas. Las conclusiones de la investigación son las siguientes. La creación de la mancomunidad del Yacus ha beneficiado a los pequeños agricultores. Estos consiguen mejores condiciones de venta y mejores precios para sus productos, lo que repercute en la mejora de sus condiciones de vida. Estas mejoras en las condiciones de venta de los productos se deben a su pertenencia a una cadena de valor de papa nativa que está funcionando de forma eficaz. Las empresas consideradas para constituir la cadena de valor han mostrado interés por formar parte de ella: los campesinos para obtener mejores precios por sus productos y unas mejores condiciones de venta; los distribuidores para asegurarse una calidad determinada de unas variedades fijas de papa nativa; la industria transformadora por disponer de un suministro de producto adecuado al derivado de papa nativa correspondiente, (hojuelas, tunta, etc.); las empresas exportadoras para tener suministro garantizado de los productos que ellos requieren en los volúmenes adecuados. Es una situación ventajosa para todas las empresas participantes. A pesar de trabajar con un producto tradicional, la cadena de valor de la papa nativa presenta innovación en los productos comercializados, tanto en la papa nativa fresca como en sus derivados, en los formatos de los productos, en la red de distribución, en las instituciones peruanas y en el consumidor final. Se percibe una demanda de papa nativa y de sus productos derivados en aquellos países donde existen comunidades de latinoamericanos que han emigrado de sus países de origen. España está entre los países que han acogido a un importante número de personas de origen latinoamericano. A pesar de la fuerte crisis económica sufrida por España, que ha llevado consigo la vuelta a sus países de origen de parte de su comunidad latinoamericana, el tamaño de esta población sigue siendo importante. Esta población demanda productos originarios de sus propios países, y los consumirían de forma frecuente si los precios son adecuados a su capacidad de consumo. El precio de venta de la papa nativa y sus derivados en España es de gran importancia. La importación de estos productos desde Perú hace que este eleve a niveles que le resta competitividad, en especial en la papa fresca. Se aconseja la búsqueda de empresas que puedan adaptar la producción de la papa fresca de forma local, y mantener para los derivados la exportación directa a España. Las preferencias de los consumidores peruanos y españoles en cuanto a formatos y marcas se refieren no son coincidentes. De las encuestas realizadas, se concluye que no puede seguirse la misma estrategia de marketing en ambos países, debiéndose diferenciar los formatos de los paquetes de la papa nativa y de sus derivados en España y en Perú, para así lograr llegar a los consumidores potenciales de ambos países. ABSTRACT At the request of the Peruvian government, the UN General Assembly declared the International Year of the Potato in 2008. Since 2005, the Peruvian government has implemented strategies around the importance of the potato, as the declaration of the 30th of May as the National Day of the Potato. FAO (Food and Agriculture Organization of the United Nations) has declared 2014 as the International Year of Family Farming, with an approach shared by this Ph.D. dissertation about the Peruvian peasant family. The Peruvian government uses value chains as a strategy to promote sustainable development, which has allowed to contribute to the social and economic inclusion of poor farmers in the high Andean regions as those located in the municipal commonwealth of Yacus (MMY) province of Jauja, department of Junín. This strategy, which incorporates small farmers in the high Andean regions, (who have very low income), to the market with profitable production processes, implies a number of changes that should take place, such as changing patterns of traditional production to those products or services that are in demand in the market, or changes in the mentality of the small farmer into a concept of production business. (Fabián, 2013). Moreover, the sustainability of value chains depends on the weakest link, which demands a knowledge of the status of all the links, in order to integrate and strengthen the chain. It is required an adequate transparency to facilitate the flow of information between the various actors. (Briz et al., 2012). Furthermore, the establishment of the value chain should be done carefully, since the effectiveness and the survival of the businesses are increasingly linked to the value chain where the firm is included and to its coordination. (Briz, 2011). In this situation, it becomes important to study the value chain of the native potato, once we establish its features, to be able to determine the feasibility or not of a value chain of this product, which has an impact of the generated wealth in small farms of the high Andean regions, and even the extension of this value chain to Spain. There are studies on native potatoes, made by different universities in several countries and even in more than one continent. However, most studies focus on improving the production of native potato. The originality of the research conducted in this Ph.D. dissertation is the study of the feasibility of commercialization of native potato, by the creation of a value chain that starts in the province of Jauja, Perú, and ends both in Peruvian markets in the region of Lima, and in Spain. The main goal of this research is to improve the economic and social conditions of farming communities in the province of Jauja in Perú, while promoting its technological and industrial development, by the establishment of a value chain of the native potato and derivatives. The specific objectives of the research are the characterization of the links in the value chain of the native potato and its derivatives in the province of Jauja, (Perú) and in Spain, in order to determine the added value; the strengthening of organizations of native potato producers, to commercialize their products and the promotion of enterprise culture; and the development of a chain to market native potato and its derivatives, with its origin in the province of Jauja, (Perú), and its end in Spain, with the sale to the Spanish consumer. In order to achieve these objectives, the used methodology is the agrifood value chain, using as a tool to analysis it the SWOT analysis of the value chain of the native potato. The primary sources of information used in the research come partly from UPM cooperation project, "Improving the value chain of Andean potato as a boost to rural development. Case Three Rural Communities in the Province of Jauja, (Perú)", in which the Ph.D. student was involved, and partly from the surveys, which were specifically designed for the different links of the value chain of the native potato. The secondary sources of information come from academic articles, from articles published by magazines of the industry, and from reports of several government institutions, both Spanish and Peruvian. The conclusions of the research are as follows. The creation of the commonwealth of Yacus has benefited small farmers. They get better sales conditions and better prices for their products, which results in the improvement of their living conditions. These improvements are due to a value chain of native potato which is working effectively. All the firms invited to constitute the value chain have shown interest in being part of it: the farmers to get better prices for their products and better sale conditions; the distributors to ensure a certain quality of fixed varieties of native potato, the processing industry in order to have an adequate supply of product to the corresponding derivative of native potato (chips, “tunta”, etc.); exporting firms to have a guaranteed supply of the products that they require with the right volumes. It's a win-win situation for all participating companies. Despite being a traditional product, the value chain of the native potato presents innovation in marketed products, (both fresh native potato and its derivatives), in the formats of products, in the distribution network, in Peruvian institutions and in relation with the consumer. There is a perceived demand of native potato and its products in countries where communities of Latin Americans have settled down. Spain is among the countries that have received a significant number of people from Latin America. Despite the strong economic crisis suffered by Spain, which has lead to a return to their home countries of part of the Latin American community, the size of this population is still considerable. This population demands products from their own countries, and they frequently consume them if the prices are suitable to their standard of living. The selling price of the native potato and its derivatives in Spain is of great importance. The import of these products from Perú makes the prices rise to levels that reduce competitiveness, especially in fresh native potatoes. It is advised to look for companies which can adapt the fresh potato production in our country, and keep direct export to Spain for the derivatives products. The preferences of Peruvian and Spanish consumers in terms of formats and brands are not the same. The surveys concluded that the same marketing strategy cannot be followed in both countries. Packet formats of native potato and its derivatives should be differentiated in Spain and Perú, in order to reach the potential consumers of both countries.

Los residuos de envases y embalajes en edificación residencial. Patrones de generación y estrategias de mejora de su gestión

Uno de los retos a los que se enfrenta la humanidad es la demanda de una sociedad con casi cero residuos: la búsqueda de una economía más eficiente en el uso de los recursos teniendo en cuenta el cambio climático y un abastecimiento sostenible de materias primas que permitan satisfacer las necesidades de una población mundial cada vez mayor, dentro de los límites sostenibles de los recursos naturales del planeta. Abordar este desafío implica la recuperación y reciclaje de materiales para reducir consumos de materias primas y, para ello, debe promoverse la innovación en la prevención y gestión de residuos, como estrategia hacia un desarrollo urbano sostenible. Los envases y embalajes forman parte de la cultura actual, relacionándose con el grado de desarrollo de países y regiones; el sector de la construcción no es ajeno a la problemática y genera un importante volumen de embalajes en las obras que no se gestionan de forma adecuada. El modelo de gestión de Residuos de Construcción Demolición (RCD) actual es poco eficaz, ya que los vertederos siguen recibiendo grandes cantidades de residuos valorizables. La normativa ha conseguido minimizar las prácticas ilegales, pero se comprueba que la gestión actual de los RCD en obra deja en manos de las plantas de tratamiento la misión de separar los residuos según su naturaleza y los datos aportados por las distintas plantas no permiten afirmar el grado de alcance de dicho objetivo, ni el destino de los mismos. Los envases y embalajes son un tipo de residuos que por su naturaleza suponen una fuente de recursos valorizables y por ello están presentes en directivas y leyes, dirigidas fundamentalmente al sector de la alimentación. En el ámbito de la construcción, hasta la fecha, no se habían tratado de forma específica, motivo que justifica este trabajo. Esta Tesis Doctoral tiene como objetivo principal mejorar la gestión de residuos de embalajes procedentes de materiales de construcción. Para ello se estudia un importante conjunto de obras de edificación residencial colectiva de 1173 viviendas, análisis que llevará a conocer los patrones de producción de los Residuos de Envases y Embalajes en Construcción (REEC) e identificar los productos o materiales responsables de su generación. La monitorización realizada, permitirá diseñar estrategias específicas que minimicen la generación de estos residuos y optimicen su valorización. Se ha podido comprobar que el tratamiento particularizado de los REEC puede mejorar los resultados de la gestión del conjunto de RCD, debido a que, al no mezclarse, se elimina un importante agente contaminador de los residuos inertes. Las obras analizadas alcanzan un nivel de segregación in situ muy bajo, y los capítulos de cerramientos e instalaciones suman más del 50% del global de REEC. Particularizando en cada tipo de material, el cartón predomina en los trabajos de electricidad, el plástico en las particiones y la madera en fachadas. Se evalúa la opción del eco-­‐rediseño para uno de los embalajes predominantes, y se identifican estrategias para minimizar su impacto. Se comprueba que el ahorro en la gestión de RCD en caso de impulsar la segregación in situ no es muy significativo en las obras estudiadas, si bien se demuestra que la viabilidad económica es el factor más importante para motivar a las empresas constructoras. Las Administraciones Públicas deberían incentivar la gestión responsable, estableciendo medidas de control en las plantas de tratamiento e implementando en sus obras medidas de gestión de RCD ejemplares para el mercado. Una adecuada planificación de la obra, y formación específica para el personal son medidas que facilitan la segregación in situ y mejoran los resultados. Los promotores, mediante su relación contractual con el resto de agentes, tienen la capacidad de establecer objetivos de reducción, planificación y gestión sostenible de los REEC. Por último, se propone un sistema de gestión de REEC, integrable dentro del Sistema de Gestión de la empresa constructora, que permite evitar que residuos valorizables tales como los envases y embalajes se envíen a vertedero, guiando al sector hacia un futuro más respetuoso, alineado con el desarrollo sostenible. ABSTRACT One of the challenges humanity faces is the demand of an almost zero waste society: the search for a more efficient economy in the use of resources, taking into account climate change and a sustainable supply of raw materials, that meet the needs of an increasing world population within the sustainable limits of the planet's natural resources. Addressing this challenge involves the recovery and recycling of materials to reduce consumption of raw materials, so innovation must therefore be promoted in the prevention and management of waste, as a strategy towards a sustainable urban development. Packaging is part of our current culture and is related to the degree of development of countries and regions; the construction sector is no stranger to this problem and generates a significant amount of packaging waste in the site works, which nowadays is not managed properly. The current Construction Demolition Waste (CDW) management model is ineffective, since landfills continue to receive large amounts of recoverable waste. The legislation has managed to minimize illegal practices, but it has been observed that the current management of CDW in the analysed works leaves the mission of separating waste according to their nature to the plants, and data provided by the latter does not allow for checking the scope of this objective, nor the destiny of the waste. Packaging is a type of waste which, by its nature, represents a source of recoverable resources and is therefore present in directives and laws, focused primarily on the food industry. It has not been specifically treated to date in the construction field, hence the reason that justifies this work. This Thesis aims to improve the management of packaging waste from construction materials. An important set of residential building works with 1173 dwellings is analysed, which leads to knowledge on the production patterns of packaging waste (PW) in the construction industry, and the identification of the products responsible for its generation. The monitorization also allows for the design of specific strategies which minimise the generation of waste and optimize recovery. It has been found that the individualized treatment of PW can improve the results of the management of the whole CDW since, when not mixed, a major pollutant of inert waste is removed. The analysed works reached a very low segregation level and the façades and building services phases account for more than 50% of the overall PW. Focusing on each type of material, cardboard predominates electricity works, plastic on partitions and wood on façades. Eco-­‐redesign is evaluated for one of the predominant packages, and strategies are identified to minimise their impact are . There is evidence that the savings in the CDW management in case of promoting segregation on site are not very significant at the studied works, although economic feasibility is the most important factor to motivate the construction companies. Public Administrations should encourage responsible management, establishing control measures in treatment plants and implementing CDW management exemplary measures on their work sites for the market. A proper planning of the works and specific training for the personnel are measures that facilitate in situ segregation and improve outcomes. The developers, through their contractual relationship with the other agents, have the ability to set reduction targets, planning and sustainable management of PW. Finally, a management system for PW is proposed, integrated within the Management System of the construction company, which aims to avoid that recoverable waste such as packaging is sent to landfill, leading the industry towards a more environmentally friendly future, aligned with sustainable development.

A novel high-sensitivity, low-power, liquid crystal temperature sensor

A novel temperature sensor based on nematic liquid crystal permittivity as a sensing magnitude, is presented. This sensor consists of a specific micrometric structure that gives considerable advantages from other previous related liquid crystal (LC) sensors. The analytical study reveals that permittivity change with temperature is introduced in a hyperbolic cosine function, increasing the sensitivity term considerably. The experimental data has been obtained for ranges from −6 °C to 100 °C. Despite this, following the LC datasheet, theoretical ranges from −40 °C to 109 °C could be achieved. These results have revealed maximum sensitivities of 33 mVrms/°C for certain temperature ranges; three times more than of most silicon temperature sensors. As it was predicted by the analytical study, the micrometric size of the proposed structure produces a high output voltage. Moreover the voltage’s sensitivity to temperature response can be controlled by the applied voltage. This response allows temperature measurements to be carried out without any amplification or conditioning circuitry, with very low power consumption.