Vehicular traffic surveillance and road lane detection using radar interferometry

Speed enforcement on public roadways is an important issue in order to guarantee road security and to reduce the number and seriousness of traffic accidents. Traditionally, this task has been partially solved using radar and/or laser technologies and, more recently, using video-camera based systems. All these systems have significant shortcomings that have yet to be overcome. The main drawback of classical Doppler radar technology is that the velocity measurement fails when several vehicles are in the radars beam. Modern radar systems are able to measure speed and range between vehicle and radar. However, this is not enough to discriminate the lane where the vehicle is driving on. The limitation of several vehicles in the beam is overcome using laser technology. However, laser systems have another important limitation: They cannot measure the speed of several vehicles simultaneously. Novel video-camera systems, based on license plate identification, solve the previous drawbacks, but they have the problem that they can only measure average speed but never top-speed. This paper studies the feasibility of using an interferometric linear frequency modulated continuous wave radar to improve top-speed enforcement on roadways. Two different systems based on down-the-road and across-the-road radar configurations are presented. The main advantage of the proposed solutions is they can simultaneously measure speed, range, and lane of several vehicles, allowing the univocal identification of the offenders. A detailed analysis about the operation and accuracy of these solutions is reported. In addition, the feasibility of the proposed techniques has been demonstrated with simulations and real experiments using a Ka-band interferometric radar developed by our research group.

Evaluation of the influence of toll systems on energy consumption and CO2 emissions: A case study of a Spanish highway

This paper studies the energy consumption and subsequent CO2 emissions of road highway transportation under three toll systems in Spain for four categories of vehicles: cars, vans, buses and articulated trucks. The influence of toll systems is tested for a section of AP-41 highway between Toledo and Madrid. One system is free flow, other is traditional stop and go and the last toll system operates with an electronic toll collection (ETC) technology. Energy consumption and CO2 emissions were found to be closely related to vehicle mass, wind exposure, engine efficiency and acceleration rate. These parameters affect, directly or indirectly, the external forces which determine the energy consumption. Reducing the magnitude of these forces through an appropriate toll management is an important way of improving the energy performance of vehicles. The type of toll system used can have a major influence on the energy efficiency of highway transportation and therefore it is necessary to consider free flow.

Prediction of PM10 concentrations using Fuzzy c-Means and ANN

Salamanca has been considered among the most polluted cities in Mexico. The vehicular park, the industry and the emissions produced by agriculture, as well as orography and climatic characteristics have propitiated the increment in pollutant concentration of Particulate Matter less than 10 μg/m3 in diameter (PM10). In this work, a Multilayer Perceptron Neural Network has been used to make the prediction of an hour ahead of pollutant concentration. A database used to train the Neural Network corresponds to historical time series of meteorological variables (wind speed, wind direction, temperature and relative humidity) and air pollutant concentrations of PM10. Before the prediction, Fuzzy c-Means clustering algorithm have been implemented in order to find relationship among pollutant and meteorological variables. These relationship help us to get additional information that will be used for predicting. Our experiments with the proposed system show the importance of this set of meteorological variables on the prediction of PM10 pollutant concentrations and the neural network efficiency. The performance estimation is determined using the Root Mean Square Error (RMSE) and Mean Absolute Error (MAE). The results shown that the information obtained in the clustering step allows a prediction of an hour ahead, with data from past 2 hours

Environmental analysis of residential building facades through energy consumption, GHG emissions and costs

This paper provides some results on the potential to minimize environmental impacts in residential buildings life cycle, through façade design strategies, analyzing also their impact on costs from a lifecycle perspective. On one hand, it assesses the environmental damage produced by the materials of the building envelope, and on the other, the benefits they offer in terms of habitability and liveability in the use phase. The analysis includes several design parameters used both for rehabilitation of existing facades, as for new facades, trying to cover various determinants and proposing project alternatives. With this study we intended to contribute to address the energy challenges for the coming years, trying also to propose pathways for innovative solutions for the building envelope.

Influence of driving style on fuel consumption and Emissions in diesel-powered passenger car

This paper presents the main results of a study on the influence of driving style on fuel consumption and pollutant emissions of diesel passenger car in urban traffic. Driving styles (eco, normal or aggressive) patterns were based on the “eco-driving” criteria. The methodology is based on on-board emission measurements in real urban traffic in the city of Madrid. Five diesel passenger cars, have been tested. Through a statistical analysis, a Dynamic Performance Index was defined for diesel passenger cars. Likewise, the CO, NOX and HC emissions were compared for each driving style for the tested vehicles. Eco-driving reduces by 14% fuel consumption and CO2 emissions, but aggressive driving increase consumption by 40%. Aggressive driving increases NOX emission by more than 40%. CO and HC, show different trends, but being increased in eco-driving style.

Proposal of a dynamic performance index to analyze driving pattern effect on car emissions

The contributions of driver behaviour as well as surrounding infrastructure are decisive on pollutant emissions from vehicles in real traffic situations. This article deals with the preliminary study of the interaction between the dynamic variables recorded in a vehicle (driving pattern) and pollutant emissions produced over a given urban route. It has been established a “dynamic performance index”-DPI, which is calculated from some driving pattern parameters, which in turn depends on traffic congestion level and route characteristics, in order to determine whether the driving has been aggressive, normal or calm. Two passenger cars instrumented with a portable activity measurement system -to record dynamic variables- and on-board emission measurement equipment have been used. This study has shown that smooth driving patterns can reduce up to 80% NOX emissions and up to 20% of fuel in the same route

Quantity of CO2 Emissions in the Life Cycle of a Highway Infrastructure

There is strong evidence to indicate that carbon dioxide and other greenhouse gases are accumulating at unprecedented concentrations in out atmosphere contributing to global climate change. Evidence is equally strong that human activities, mainly the burning of fossil fuels, are driving force in this process (IPCC 2007). While different industries contribute varying amounts to total anthropogenic greenhouse gases, it is incumbent upon each to understand its contribution and search for sensible ways to reduce overall greenhouse gas production. The aim of this paper is the development of a methodology to determine the amount of CO2 emissions of a highway, allowing providing solutions that can improve the energy footprint and reduce its emissions

Emissions and economic costs of cycling compact fluorescent lamps with integrated ballasts

This paper proposes a way to quantify the emissions of mercury (Hg) and CO2 associated with the manufacture and operation of compact fluorescent lamps with integrated ballasts (CFLis), as well as the economic cost of using them under different operating cycles. The main purpose of this paper is to find simple criteria for reducing the polluting emissions under consideration and the economic cost of CFLi to a minimum. A lifetime model is proposed that allows the emissions and costs to be described as a function of degradation from turning CFLi on and their continuous operation. An idealized model of a CFLi is defined that combines characteristics stated by different manufacturers. In addition, two CFLi models representing poor-quality products are analyzed. It was found that the emissions and costs per unit of time of operation of the CFLi depend linearly on the number of times per unit of time it is turned on and the time of continuous operation. The optimal conditions (lowest emissions and costs) depend on the place of manufacture, the place of operation and the quality of the components of the lamp/ballast. Finally, it was also found that for each lamp, there are intervals when it is turned off during which emissions of pollutants and costs are identical regardless of how often the lamp is turned on or the time it remains on. For CO2 emissions, the lamp must be off up to 5 minutes; for the cost, up to 7 minutes and for Hg emissions, up to 43 minutes. It is advisable not to turn on a CFLi sooner than 43 minutes from the last time it was turned off.

Influence of the composition of natural gas-hydrogen blends (HCNG) on performance an CO2 emissions of a spark ignition engine

Addition of hydrogen to natural gas could be a short-term alternative to nowadays fossil fuels as the emissions of greenhouse gases may be reduced. The aim of this study is to evaluate the performance and emissions of a park ignition engine fuelled with pure natural gas, pure hydrogen and different blends of hydrogen and natural gas (HCNG). The increase of the hydrogen fraction leads to variations in the cylinder pressure and CO2 emissions. In this work, a combustion model based on thermodynamic equations is used considering separated zones for the burned and unburned gases. The results show that the maximum cylinder pressure gets higher as the fraction of hydrogen in the blend increases. The presence of hydrogen in the blend leads to a drecrease in the CO2 emissions. Due to hydrogen properties, leaner fuel-air mixtures can be used along with the appropiate spark timing, leading to an engine emissions improvement without a performance worsening.

Development of a methodology and tool to evaluate the impact of ICT measures on road transport emissions

The paper presents the main elements of a project entitled ICT-Emissions that aims at developing a novel methodology to evaluate the impact of ICT-related measures on mobility, vehicle energy consumption and CO2 emissions of vehicle fleets at the local scale, in order to promote the wider application of the most appropriate ICT measures. The proposed methodology combines traffic and emission modelling at micro and macro scales. These will be linked with interfaces and submodules which will be specifically designed and developed. A number of sources are available to the consortium to obtain the necessary input data. Also, experimental campaigns are offered to fill in gaps of information in traffic and emission patterns. The application of the methodology will be demonstrated using commercially available software. However, the methodology is developed in such a way as to enable its implementation by a variety of emission and traffic models. Particular emphasis is given to (a) the correct estimation of driver behaviour, as a result of traffic-related ICT measures, (b) the coverage of a large number of current vehicle technologies, including ICT systems, and (c) near future technologies such as hybrid, plug-in hybrids, and electric vehicles. The innovative combination of traffic, driver, and emission models produces a versatile toolbox that can simulate the impact on energy and CO2 of infrastructure measures (traffic management, dynamic traffic signs, etc.), driver assistance systems and ecosolutions (speed/cruise control, start/stop systems, etc.) or a combination of measures (cooperative systems).The methodology is validated by application in the Turin area and its capacity is further demonstrated by application in real world conditions in Madrid and Rome.

VISIONS Vehicular communication Improvement : solution based on IMS Operational Nodes and Services

Digital services and communications in vehicular scenarios provide the essential assets to improve road transport in several ways like reducing accidents, improving traffic efficiency and optimizing the transport of goods and people. Vehicular communications typically rely on VANET (Vehicular Ad hoc Networks). In these networks vehicles communicate with each other without the need of infrastructure. VANET are mainly oriented to disseminate information to the vehicles in certain geographic area for time critical services like safety warnings but present very challenging requirements that have not been successfully fulfilled nowadays. Some of these challenges are; channel saturation due to simultaneous radio access of many vehicles, routing protocols in topologies that vary rapidly, minimum quality of service assurance and security mechanisms to efficiently detect and neutralize malicious attacks. Vehicular services can be classified in four important groups: Safety, Efficiency, Sustainability and Infotainment. The benefits of these services for the transport sector are clear but many technological and business challenges need to be faced before a real mass market deployment. Service delivery platforms are not prepared for fulfilling the needs of this complex environment with restrictive requirements due to the criticism of some services To overcome this situation, we propose a solution called VISIONS “Vehicular communication Improvement: Solution based on IMS Operational Nodes and Services”. VISIONS leverages on IMS subsystem and NGN enablers, and follows the CALM reference Architecture standardized by ISO. It also avoids the use of Road Side Units (RSUs), reducing complexity and high costs in terms of deployment and maintenance. We demonstrate the benefits in the following areas: 1. VANET networks efficiency. VISIONS provide a mechanism for the vehicles to access valuable information from IMS and its capabilities through a cellular channel. This efficiency improvement will occur in two relevant areas: a. Routing mechanisms. These protocols are responsible of carrying information from a vehicle to another (or a group of vehicles) using multihop mechanisms. We do not propose a new algorithm but the use of VANET topology information provided through our solution to enrich the performance of these protocols. b. Security. Many aspects of security (privacy, key, authentication, access control, revocation mechanisms, etc) are not resolved in vehicular communications. Our solution efficiently disseminates revocation information to neutralize malicious nodes in the VANET. 2. Service delivery platform. It is based on extended enablers, reference architectures, standard protocols and open APIs. By following this approach, we reduce costs and resources for service development, deployment and maintenance. To quantify these benefits in VANET networks, we provide an analytical model of the system and simulate our solution in realistic scenarios. The simulations results demonstrate how VISIONS improves the performance of relevant routing protocols and is more efficient neutralizing security attacks than the widely proposed solutions based on RSUs. Finally, we design an innovative Social Network service based in our platform, explaining how VISIONS facilitate the deployment and usage of complex capabilities. RESUMEN Los servicios digitales y comunicaciones en entornos vehiculares proporcionan herramientas esenciales para mejorar el transporte por carretera; reduciendo el número de accidentes, mejorando la eficiencia del tráfico y optimizando el transporte de mercancías y personas. Las comunicaciones vehiculares generalmente están basadas en redes VANET (Vehicular Ad hoc Networks). En dichas redes, los vehículos se comunican entre sí sin necesidad de infraestructura. Las redes VANET están principalmente orientadas a difundir información (por ejemplo advertencias de seguridad) a los vehículos en determinadas zonas geográficas, pero presentan unos requisitos muy exigentes que no se han resuelto con éxito hasta la fecha. Algunos de estos retos son; saturación del canal de acceso de radio debido al acceso simultáneo de múltiples vehículos, la eficiencia de protocolos de encaminamiento en topologías que varían rápidamente, la calidad de servicio (QoS) y los mecanismos de seguridad para detectar y neutralizar los ataques maliciosos de manera eficiente. Los servicios vehiculares pueden clasificarse en cuatro grupos: Seguridad, Eficiencia del tráfico, Sostenibilidad, e Infotainment (información y entretenimiento). Los beneficios de estos servicios para el sector son claros, pero es necesario resolver muchos desafíos tecnológicos y de negocio antes de una implementación real. Las actuales plataformas de despliegue de servicios no están preparadas para satisfacer las necesidades de este complejo entorno con requisitos muy restrictivos debido a la criticidad de algunas aplicaciones. Con el objetivo de mejorar esta situación, proponemos una solución llamada VISIONS “Vehicular communication Improvement: Solution based on IMS Operational Nodes and Services”. VISIONS se basa en el subsistema IMS, las capacidades NGN y es compatible con la arquitectura de referencia CALM estandarizado por ISO para sistemas de transporte. También evita el uso de elementos en las carreteras, conocidos como Road Side Units (RSU), reduciendo la complejidad y los altos costes de despliegue y mantenimiento. A lo largo de la tesis, demostramos los beneficios en las siguientes áreas: 1. Eficiencia en redes VANET. VISIONS proporciona un mecanismo para que los vehículos accedan a información valiosa proporcionada por IMS y sus capacidades a través de un canal de celular. Dicho mecanismo contribuye a la mejora de dos áreas importantes: a. Mecanismos de encaminamiento. Estos protocolos son responsables de llevar información de un vehículo a otro (o a un grupo de vehículos) utilizando múltiples saltos. No proponemos un nuevo algoritmo de encaminamiento, sino el uso de información topológica de la red VANET a través de nuestra solución para enriquecer el funcionamiento de los protocolos más relevantes. b. Seguridad. Muchos aspectos de la seguridad (privacidad, gestión de claves, autenticación, control de acceso, mecanismos de revocación, etc) no están resueltos en las comunicaciones vehiculares. Nuestra solución difunde de manera eficiente la información de revocación para neutralizar los nodos maliciosos en la red. 2. Plataforma de despliegue de servicios. Está basada en capacidades NGN, arquitecturas de referencia, protocolos estándar y APIs abiertos. Siguiendo este enfoque, reducimos costes y optimizamos procesos para el desarrollo, despliegue y mantenimiento de servicios vehiculares. Para cuantificar estos beneficios en las redes VANET, ofrecemos un modelo de analítico del sistema y simulamos nuestra solución en escenarios realistas. Los resultados de las simulaciones muestran cómo VISIONS mejora el rendimiento de los protocolos de encaminamiento relevantes y neutraliza los ataques a la seguridad de forma más eficientes que las soluciones basadas en RSU. Por último, diseñamos un innovador servicio de red social basado en nuestra plataforma, explicando cómo VISIONS facilita el despliegue y el uso de las capacidades NGN.

Energy consumption and carbon dioxide emissions in rail and road freight transport in Spain: a case study of car carriers and bulk petrochemicals

This article provides a new methodology for estimating fuel consumption and emissions by enabling a correct comparison between freight transportation modes. The approach is developed and integrated as a part of an intelligent transportation system dealing with goods movement. A key issue is related to energy consumption ratios and consequent CO2 emissions. Energy consumption ratios are often used based on transport demand. However, including other ratios based on transport supply can be useful. Furthermore, it is important to indicate which factors are associated with variations in energy consumption and emissions; especially of interest are parameters that have a higher incidence and order of magnitude, in order to fairly compare and understand the difference between transport modes and sub-modes. The study finds that the use of an energy consumption equation can improve the quality of the estimates. The study proposes that coefficients that define the energy consumption equation should be tested to determine market niches and sources of improvement in energy consumption according to the category of vehicles, fuel types used, and classes of products transported.

CO2 emissions from a spark ignition engine operatin on natural-hydrogen blends (HCNG)

The addition of hydrogen to natural gas could be a short-term alternative to today’s fossil fuels, as greenhouse gas emissions may be reduced. The aim of this study is to evaluate the emissions and performance of a spark ignition engine fuelled by pure natural gas, pure hydrogen, and different blends of hydrogen and natural gas (HCNG). Increasing the hydrogen fraction leads to variations in cylinder pressure and CO2 emissions. In this study, a combustion model based on thermodynamic equations is used, considering separate zones for burned and unburned gases. The results show that the maximum cylinder pressure rises as the fraction of hydrogen in the blend increases. The presence of hydrogen in the blend leads to a decrease in CO2 emissions. Due to the properties of hydrogen, leaner fuel–air mixtures can be used along with the appropriate spark timing, leading to an improvement in engine emissions with no loss of performance.

The application of inverse-dispersion and gradient methods to estimate ammonia emissions from a penguin colony.

Penguin colonies represent some of the most concentrated sources of ammonia emissions to the atmosphere in the world. The ammonia emitted into the atmosphere can have a large influence on the nitrogen cycling of ecosystems near the colonies. However, despite the ecological importance of the emissions, no measurements of ammonia emissions from penguin colonies have been made. The objective of this work was to determine the ammonia emission rate of a penguin colony using inverse-dispersion modelling and gradient methods. We measured meteorological variables and mean atmospheric concentrations of ammonia at seven locations near a colony of Adélie penguins in Antarctica to provide input data for inverse-dispersion modelling. Three different atmospheric dispersion models (ADMS, LADD and a Lagrangian stochastic model) were used to provide a robust emission estimate. The Lagrangian stochastic model was applied both in ‘forwards’ and ‘backwards’ mode to compare the difference between the two approaches. In addition, the aerodynamic gradient method was applied using vertical profiles of mean ammonia concentrations measured near the centre of the colony. The emission estimates derived from the simulations of the three dispersion models and the aerodynamic gradient method agreed quite well, giving a mean emission of 1.1 g ammonia per breeding pair per day (95% confidence interval: 0.4–2.5 g ammonia per breeding pair per day). This emission rate represents a volatilisation of 1.9% of the estimated nitrogen excretion of the penguins, which agrees well with that estimated from a temperature-dependent bioenergetics model. We found that, in this study, the Lagrangian stochastic model seemed to give more reliable emission estimates in ‘forwards’ mode than in ‘backwards’ mode due to the assumptions made.

Nitrous oxide emissions from European agriculture - an analysis of variability and drivers of emissions from field experiments

Nitrous oxide emissions from a network of agricultural experiments in Europe were used to explore the relative importance of site and management controls of emissions. At each site, a selection of management interventions were compared within replicated experimental designs in plot-based experiments. Arable experiments were conducted at Beano in Italy, El Encin in Spain, Foulum in Denmark, Logarden in Sweden, Maulde in Belgium CE1, Paulinenaue in Germany, and Tulloch in the UK. Grassland experiments were conducted at Crichton, Nafferton and Peaknaze in the UK, Godollo in Hungary, Rzecin in Poland, Zarnekow in Germany and Theix in France. Nitrous oxide emissions were measured at each site over a period of at least two years using static chambers. Emissions varied widely between sites and as a result of manipulation treatments. Average site emissions (throughout the study period) varied between 0.04 and 21.21 kg N2O-N ha−1yr−1, with the largest fluxes and variability associated with the grassland sites. Total nitrogen addition was found to be the single most important deter- minant of emissions, accounting for 15 % of the variance (using linear regression) in the data from the arable sites (p<0.0001), and 77 % in the grassland sites. The annual emissions from arable sites were significantly greater than those that would be predicted by IPCC default emission fac- tors. Variability of N2O emissions within sites that occurred as a result of manipulation treatments was greater than that resulting from site-to-site and year-to-year variation, highlighting the importance of management interventions in contributing to greenhouse gas mitigation