Relationship between fibre orientation and tensile strength of natural collagen membranes for heart valve leaflets

Heart valve prostheses are used to replace native heart valves which that are damaged because of congenital diseases or due to ageing. Biological prostheses made of bovine pericardium are similar to native valves and do not require any anticoagulation treatment, but are less durable than mechanical prostheses and usually fail by tearing. Researches are oriented in improving the resistance and durability of biological heart valve prostheses in order to increase their life expectancy. To understand the mechanical behaviour of bovine pericardium and relate it to its microstructure (mainly collagen fibres concentration and orientation) uniaxial tensile tests have been performed on a model material made of collagen fibres. Small Angle Light Scattering (SALS) has been also used to characterize the microstructure without damaging the material. Results with the model material allowed us to obtain the orientation of the fibres, relating the microstructure to mechanical performance

Effect of sugar beet pulp fibre fractions on growth performance, fecal digestibility and digestive physiology in rabbits around weaning

The present study investigated the effect of the different fibre components of sugar beet pulp (SBP) on growth performance and some digestive traits. Four semi-synthetic diets were formulated with similar NDF (33% DM) and protein (16% DM) level. Control diet was formulated to contain the lowest level of soluble fibre (3% DM) and SBP diet the highest (9%). The soluble (pectins) and insoluble fractions of SBP were studied in other two diets (Pectin and InsSBP diets). A total of 136 weanling rabbits (25 d of age) was housed individually, randomly assigned to 4 experimental groups, and fed ad libitum with the experimental diets during 10 days after weaning. The type of diet did not affect growth rate and stomach pH. Animals fed with SBP diet showed higher DM and NDF digestibility (4 and 83%, respectively), gain:feed ratio (13%), cecal and total tract weight (13 and 9%) and ileal viscosity (148%) than rabbits fed the Control diet, but lower cecal pH (9%). Pectin diet increased ileal viscosity and decreased the weight of stomach content with respect to SBP diet. Rabbits fed InsSBP diet showed similar results to SBP diet but lower ileal viscosity and cecal pH than those fed Pectin diet. In conclusion, SBP and their soluble and insoluble fractions are well digested in young rabbits. However the soluble and insoluble fibre of SBP produce different effects in the gastrointestinal tract.

A robust numerical framework for the analysis of material failure of fibre reinforced soft tissue

In this work, robustness and stability of continuum damage models applied to material failure in soft tissues are addressed. In the implicit damage models equipped with softening, the presence of negative eigenvalues in the tangent elemental matrix degrades the condition number of the global matrix, leading to a reduction of the computational performance of the numerical model. Two strategies have been adapted from literature to improve the aforementioned computational performance degradation: the IMPL-EX integration scheme [Oliver,2006], which renders the elemental matrix contribution definite positive, and arclength-type continuation methods [Carrera,1994], which allow to capture the unstable softening branch in brittle ruptures. The IMPL-EX integration scheme has as a major drawback the need to use small time steps to keep numerical error below an acceptable value. A convergence study, limiting the maximum allowed increment of internal variables in the damage model, is presented. Finally, numerical simulation of failure problems with fibre reinforced materials illustrates the performance of the adopted methodology.

Which could be the role of Hybrid Fibre Coax in Next Generation Access networks?

Next generation access networks (NGAN) will support a renewed communication structure where opportunities lie in the provision of ubiquitous broadband connectivity, a wide variety of new applications, appealing contents and a general support to the sustainable growth of diverse sectors. From their deployment it is expected a wealth of innovations, jobs creation and a new wave of economic growth. In this paper we discuss which could be the role of Hybrid Fibre Coax (HFC) in the Next Generation Access Network (NGAN) roadmap. Thus, we propose a simplified model for making approximate cost calculations for HFC deployment based on the geographic and sociodemographic characteristics of Spain. Considering the latest evolution of HFC based on DOCSIS 3.0 from integrated (I-CMTS) towards modular (M-CMTS), the results from the model are compared with the most competitive NGAN for ultrabroadband speeds: Fibre to the Home (FTTH) based on Gigabitcapable Passive Optical Networks (GPON)

Infraestructura verde: un espacio para la innovación de la cubierta vegetal.

Las ciudades se prevé que continúen creciendo en los próximos años. Esto agudizará la demanda de servicios y recursos. Día tras día, somos testigos de los cambios rápidos y conflictivos que modifican a la ciudad, sus suelos, sus paisajes, afectando su entorno como nunca antes. Estos ambientes dominados por el hombre crean condiciones que degradan los ecosistemas. Si las ciudades han de reducir su impacto ambiental, se deben desarrollar las prácticas innovadoras para reemplazar los servicios de los ecosistemas que se pierden durante el proceso de urbanización. La infraestructura verde ofrece un enfoque contemporáneo a la conceptualización y gestión de estos recursos. Este concepto se ha desarrollado rápidamente y transformado en estratégico, al reunir los retos ecológicos, económicos y sociales del planeamiento del territorio, incluyendo a la ciudad. La infraestructura verde le ha prestado especial atención al crecimiento, y por ello, las investigaciones relacionados con este tema se orientan sobre una comprensión en múltiples capas de la naturaleza cambiante de los recursos naturales. Las infraestructuras verdes resultan, por ende, en una gran variedad de tipologías, esto creó la necesidad de estudiar una mejor articulación y precisar distinciones entre ellas. Con esta visión este estudio evaluó las condiciones y viabilidad de utilizar sistemas de techos con vegetación o verde para la recuperación del ecosistema urbano. Para ello se relacionaron estos sistemas con otra dinámica que comparte algunos de sus principios y que forma parte de la infraestructura verde de la ciudad, la agricultura urbano, específicamente los huertos comunitarios. Para comprender sus respectivas ventajas y desventajas, las diferencias y similitudes de los modos dispares de IV, se necesita un método integral que permite un análisis comparativo y su valoración. El marco de evaluación desarrollado para esta investigación es una herramienta para la evaluación de infraestructuras verde con un conjunto de criterios e indicadores amplios y actualizados. Puede ser utilizado para generar datos, o de apoyo e inspiración para arquitectos, ingenieros, urbanistas, diseñadores, responsables políticos y miembros de la comunidad que buscan maximizar el potencial de los proyectos existentes o realizar nuevos. Mientras que el camino hacia modos de desarrollo sostenible no están del todo claros, la comprensión de sus múltiples beneficios e impactos positivos a nivel local y global es imprescindible.

Degradation in seawater of structural adhesives for hybrid fibre-metal laminated materials

The adhesives used for applications in marine environments are subject to particular chemical conditions, which are mainly characterised by an elevated chlorine ion content and intermittent wetting/drying cycles, among others.These conditions can limit the use of adhesives due to the degradation processes that they experience. In this work, the chemical degradation of two different polymers, polyurethane and vinylester, was studied in natural seawater under immersion for different periods of time.The diffusion coefficients and concentration profiles of water throughout the thickness of the adhesiveswere obtained.Microstructural changes in the polymer due to the action of water were observed by SEM, and the chemical degradation of the polymer was monitored with the Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The degradation of the mechanical properties of the adhesive was determined by creep tests withMixed Cantilever Beam (MCB) specimens at different temperatures. After 180 days of immersion of the specimens, it was concluded that the J-integral value (depending on the strain) implies a loss of stiffness of 51% and a decrease in the failure load of 59% for the adhesive tested.

Mode II fracture energy in the adhesive bonding of dissimilar substrates: carbon fibre composite to aluminium joints

The end-notched flexure (ENF) test calculates the value of mode II fracture energy in adhesive bonding between the substrates of same nature. Traditional methods of calculating fracture energy in the ENF test are not suitable in cases where the thickness of the adhesive is non-negligible compared with adherent thicknesses. To address this issue, a specific methodology for calculating mode II fracture energy has been proposed in this paper. To illustrate the applicability of the proposed method, the fracture energy was calculated by the ENF test for adhesive bonds between aluminium and a composite material, which considered two different types of adhesive (epoxy and polyurethane) and various surface treatments. The proposed calculation model provides higher values of fracture energy than those obtained from the simplified models that consider the adhesive thickness to be zero, supporting the conclusion that the calculation of mode II fracture energy for adhesives with non-negligible thickness relative to their adherents should be based on mathematical models, such as the method proposed in this paper, that incorporate the influence of this thickness.

Exceptionally well-preserved vegetal remains from the Upper Cretaceous of "Lo Hueco", Cuenca, Spain

Vegetal remains are considered labile structures that quickly become decayed in ecosystems. However, certain lignified tissues (woody plants) can largely resist decomposition, becoming sometimes exceptionally well preserved. At the Upper Cretaceous site of ?Lo Hueco? (Cuenca, Spain), those woody remains (trunks and branches) with resinous material in the inner tracheids and parenchyma cells that were buried rapidly under anoxic conditions experienced a low degree of maturation, becoming exceptionally well preserved. Those woody remains deposited under oxic conditions (subaerial or sub-aquatic exposure) were more intensely biodegraded and subsequently carbonified, partially or completely mineralized in gypsum and covered by a ferruginous crust. These two modes of preservation are scarce, with silicification or carbonification processes much more common, and both can be considered as ?exceptional preservation?. Other vegetal remains, such as carbonified leaves, stems and roots, were collected in the site. The different modes of preservation depend directly on: depositional micro-environment (sandy distributary channel, muddy flood plain); and type (trunk, branch, stem, leave, root) and state (presence or absence of resinous material) of the material. The great abundance and diversity of fossils in ?Lo Hueco? identify it as Konzentrat-Lagersta¿tten, sequentially formed by alternated events of flooding and drying depositional events, but the exceptional quality and rarity of determinate vegetal macroremains preservation suggest that certain deposits of this site can be considered as conservation deposits.

Metodología de ecoinnovación PDCA, aplicada al prototipo de fachada vegetal aljibe Naturpanel en el Proyecto SOS-Natura

Este artículo expone la metodología de trabajo desarrollada en las investigaciones del Departamento de Construcción y Tecnología Arquitectónicas de la UPM, basada en el concepto de ecoinnovación, y en la normativa AENOR de Ecodiseño (UNE-EN ISO 14006), en normativas relacionadas como la UNE-EN ISO 9001 y 14001, entre otras. Dicha metodología considera los aspectos medioambientales desde las primeras fases de la investigación, para aumentar la ecoeficiencia de las propuestas producidas, de manera que satisfagan las necesidades humanas y proporcionen una mejor calidad de vida, a la vez que reduzcan progresivamente los impactos ambientales y la intensidad de consumo de recursos a lo largo de su ciclo de vida, hasta un nivel, al menos, en línea con la capacidad de asimilación de la Tierra. El objetivo de esta comunicación es explicar y dar a conocer, mediante ejemplos concretos, dicha metodología; los beneficios de la misma y cómo influye su utilización en el diseño arquitectónico de fachadas vegetales.

Smooth light extraction in lighting optical fibre

Smooth light extraction in lighting optical fibre

A Simplified Energy Consumption Model for Fibre-Based Next Generation Access Networks

Presentación realizada en el PhD Seminar del ITS 2011 en Budapest. ICTs (Information and Communication Technologies) currently account for 2% of total carbon emissions. However, although modern standards require strict measures to reduce energy consumption across all industrial and services sectors, the ICT sector also faces an increase in services and bandwidth demand. The deployment of Next Generation Networks (NGN) will be the answer to this new demand; more specifically, Next Generation Access Networks (NGANs) will provide higher bandwidth access to users. Several policy and cost analyses are being carried out to understand the risks and opportunities of new deployments, but the question of what role energy consumption plays in NGANs seems off the table. Thus, this paper proposes a model to analyse the energy consumption of the main fibre-based NGAN architectures: Fibre To The House (FTTH), in both Passive Optical Network (PON) and Point-to-Point (PtP) variations, and FTTx/VDSL. The aim of this analysis is to provide deeper insight on the impact of new deployments on the energy consumption of the ICT sector and the effects of energy consumption on the life-cycle cost of NGANs. The paper also presents an energy consumption comparison of the presented architectures, particularised to the specific geographic and demographic distribution of users of Spain but easily extendable to other countries.

Metodología de ecoinnovación PDCA, aplicada al prototipo de Fachada Vegetal Aljibe Natura. Proyecto SOS Natura-UPM Arquitectura,

Metodología de ecoinnovación PDCA, aplicada al prototipo de Fachada Vegetal Aljibe Natura. Proyecto SOS Natura-UPM Arquitectura

A robust numerical framework to the analysis of material failure of fibre reinforced soft tissue

In this work, robustness and stability of continuum damage models applied to material failure in soft tissues are addressed. In the implicit damage models equipped with softening, the presence of negative eigenvalues in the tangent elemental matrix degrades the condition number of the global matrix, leading to a reduction of the computational performance of the numerical model. Two strategies have been adapted from literature to improve the aforementioned computational performance degradation: the IMPL-EX integration scheme [Oliver,2006], which renders the elemental matrix contribution definite positive, and arclength-type continuation methods [Carrera,1994], which allow to capture the unstable softening branch in brittle ruptures. The IMPL-EX integration scheme has as a major drawback the need to use small time steps to keep numerical error below an acceptable value. A convergence study, limiting the maximum allowed increment of internal variables in the damage model, is presented. Finally, numerical simulation of failure problems with fibre reinforced materials illustrates the performance of the adopted methodology.

Estudio sobre posibilidad y procedimientos de fabricacion de aglomerados de carbon vegetal en España

Para la realización del presente trabajo, hemos procurado seguir una norma de conducta que, persiguiendo primordialmente la finalidad que lo motivó, salvase, en lo posible, las dos dificultades esenciales que se nos presentaban desde el primer momento que de él nos ocupamos

Comparative characterization of dietary fibre-Enriched Frozen/thawed mashed potatoes

The potential use of commercial fibres (pea fibre, inulin, and their blends), as fibre-enriching agents in frozen/thawed mashed potatoes was reported. Pea fibre and inulin supplementations conferred hardness and softness to the product, respectively. Differences were attributed to the relationship of the fibre with the potato starch matrix. The association of pea fibre at low concentration (<15 g/kg mashed potatoes) and inulin at high concentration (>45 g/kg) is strongly encouraged to fortify the diet without promoting negative effects on textural and rheological properties of frozen/thawed mashed potatoes or colour and overall acceptability of the resulting products.