Application of user-centered design in the development of an atomated/assisted testing system for self-service devices

Automated Teller Machines (ATMs) are sensitive self-service systems that require important investments in security and testing. ATM certifications are testing processes for machines that integrate software components from different vendors and are performed before their deployment for public use. This project was originated from the need of optimization of the certification process in an ATM manufacturing company. The process identifies compatibility problems between software components through testing. It is composed by a huge number of manual user tasks that makes the process very expensive and error-prone. Moreover, it is not possible to fully automate the process as it requires human intervention for manipulating ATM peripherals. This project presented important challenges for the development team. First, this is a critical process, as all the ATM operations rely on the software under test. Second, the context of use of ATMs applications is vastly different from ordinary software. Third, ATMs’ useful lifetime is beyond 15 years and both new and old models need to be supported. Fourth, the know-how for efficient testing depends on each specialist and it is not explicitly documented. Fifth, the huge number of tests and their importance implies the need for user efficiency and accuracy. All these factors led us conclude that besides the technical challenges, the usability of the intended software solution was critical for the project success. This business context is the motivation of this Master Thesis project. Our proposal focused in the development process applied. By combining user-centered design (UCD) with agile development we ensured both the high priority of usability and the early mitigation of software development risks caused by all the technology constraints. We performed 23 development iterations and finally we were able to provide a working solution on time according to users’ expectations. The evaluation of the project was carried out through usability tests, where 4 real users participated in different tests in the real context of use. The results were positive, according to different metrics: error rate, efficiency, effectiveness, and user satisfaction. We discuss the problems found, the benefits and the lessons learned in the process. Finally, we measured the expected project benefits by comparing the effort required by the current and the new process (once the new software tool is adopted). The savings corresponded to 40% less effort (man-hours) per certification. Future work includes additional evaluation of product usability in a real scenario (with customers) and the measuring of benefits in terms of quality improvement.

System Integration in a UAS design. An example of undergraduate student's tasks.

Systems integration is the origin of most major difficulties found in the engineering design of aeronautical vehicles. The whole design team must assure that each subsystem accomplishes its particular goals and that, together with the rest of the systems, they all meet the general aircraft requirements.Design and building of UAS is a field of actuation to which leading Universities, research Centers and Aeronautical designers have dedicated a lot of effort. In recent years, a team of students, lecturers and professors at the Escuela Universitaria de Ingeniería Técnica Aeronáutica (EUITA) have been working on the design and building of a UAS for civil observation. The design of multi-mission Unmanned Aerial Vehicles (UAVs) has seen a rapid progress in the last years. A wide variety of designs and applications, some of them really ingenious, have been proposed. The project, which has been going on as a teamwork experience for the last ten years, consists of the design and building of a UAV, and its peculiarity is that it has been carried out entirely by undergraduate students, as part of their Final Research Project. The students face a challenge that includes all the features and stages of an authentic engineering project. We present the current moment of evolution in the process, together with a description of the main difficulties the project has undergone, as a global experience in engineering design and development.

University authentication system based on Java card and digital X.509 certificate

This article presents a solution to the problem of strong authentication, portable and expandable using a combination of Java technology and storage of X.509 digital certificate in Java cards to access services offered by an institution, in this case, the technology of the University of Panama, ensuring the authenticity, confidentiality, integrity and non repudiation.

Integración de Fuentes con Información de Contexto y Sistemas Interactivos

Durante el transcurso de esta Tesis Doctoral se ha realizado un estudio de la problemática asociada al desarrollo de sistemas de interacción hombre-máquina sensibles al contexto. Este problema se enmarca dentro de dos áreas de investigación: los sistemas interactivos y las fuentes de información contextual. Tradicionalmente la integración entre ambos campos se desarrollaba a través de soluciones verticales específicas, que abstraen a los sistemas interactivos de conocer los procedimientos de bajo nivel de acceso a la información contextual, pero limitan su interoperabilidad con otras aplicaciones y fuentes de información. Para solventar esta limitación se hace imprescindible potenciar soluciones interoperables que permitan acceder a la información del mundo real a través de procedimientos homogéneos. Esta problemática coincide perfectamente con los escenarios de \Computación Ubicua" e \Internet de las Cosas", donde se apunta a un futuro en el que los objetos que nos rodean serán capaces de obtener información del entorno y comunicarla a otros objetos y personas. Los sistemas interactivos, al ser capaces de obtener información de su entorno a través de la interacción con el usuario, pueden tomar un papel especial en este escenario tanto como consumidores como productores de información. En esta Tesis se ha abordado la integración de ambos campos teniendo en cuenta este escenario tecnológico. Para ello, en primer lugar se ha realizado un an álisis de las iniciativas más importantes para la definición y diseño de sistemas interactivos, y de las principales infraestructuras de suministro de información. Mediante este estudio se ha propuesto utilizar el lenguaje SCXML del W3C para el diseño de los sistemas interactivos y el procesamiento de los datos proporcionados por fuentes de contexto. Así, se ha reflejado cómo las capacidades del lenguaje SCXML para combinar información de diferentes modalidades pueden también utilizarse para procesar e integrar información contextual de diferentes fuentes heterogéneas, y por consiguiente diseñar sistemas de interacción sensibles al contexto. Del mismo modo se presenta a la iniciativa Sensor Web, y a su extensión semántica Semantic Sensor Web, como una iniciativa idónea para permitir un acceso y suministro homogéneo de la información a los sistemas interactivos sensibles al contexto. Posteriormente se han analizado los retos que plantea la integración de ambos tipos de iniciativas. Como resultado se ha conseguido establecer una serie de funcionalidades que son necesarias implementar para llevar a cabo esta integración. Utilizando tecnologías que aportan una gran flexibilidad al proceso de implementación y que se apoyan en recomendaciones y estándares actuales, se implementaron una serie de desarrollos experimentales que integraban las funcionalidades identificadas anteriormente. Finalmente, con el fin de validar nuestra propuesta, se realizaron un conjunto de experimentos sobre un entorno de experimentación que simula el escenario de la conducción. En este escenario un sistema interactivo se comunica con una extensión semántica de una plataforma basada en los estándares de la Sensor Web para poder obtener información y publicar las observaciones que el usuario realizaba al sistema. Los resultados obtenidos han demostrado la viabilidad de utilizar el lenguaje SCXML para el diseño de sistemas interactivos sensibles al contexto que requieren acceder a plataformas avanzadas de información para consumir y publicar información a la vez que interaccionan con el usuario. Del mismo modo, se ha demostrado cómo la utilización de tecnologías semánticas en los procesos de consulta y publicación de información puede facilitar la reutilización de la información publicada en infraestructuras Sensor Web por cualquier tipo de aplicación, y de este modo contribuir al futuro escenario de Internet de las Cosas. ABSTRACT In this Thesis, we have addressed the difficulties related to the development of context-aware human-machine interaction systems. This issue is part of two research fields: interactive systems and contextual information sources. Traditionally both fields have been integrated through domain-specific vertical solutions that allow interactive systems to access contextual information without having to deal with low-level procedures, but restricting their interoperability with other applications and heterogeneous data sources. Thus, it is essential to boost the research on interoperable solutions that provide access to real world information through homogeneous procedures. This issue perfectly matches with the scenarios of \Ubiquitous Computing" and \Internet of Things", which point toward a future in which many objects around us will be able to acquire meaningful information about the environment and communicate it to other objects and to people. Since interactive systems are able to get information from their environment through interaction with the user, they can play an important role in this scenario as they can both consume real-world data and produce enriched information. This Thesis deals with the integration of both fields considering this technological scenario. In order to do this, we first carried out an analysis of the most important initiatives for the definition and design of interactive systems, and the main infrastructures for providing information. Through this study the use of the W3C SCXML language is proposed for both the design of interactive systems and the processing of data provided by different context sources. Thus, this work has shown how the SCXML capabilities for combining information from different modalities can also be used to process and integrate contextual information from different heterogeneous sensor sources, and therefore to develope context-aware interaction systems. Similarly, we present the Sensor Web initiative, and its semantic extension Semantic Sensor Web, as an appropriate initiative to allow uniform access and delivery of information to the context-aware interactive systems. Subsequently we have analyzed the challenges of integrating both types of initiatives: SCXML and (Semantic) Sensor Web. As a result, we state a number of functionalities that are necessary to implement in order to perform this integration. By using technologies that provide exibility to the implementation process and are based on current recommendations and standards, we implemented a series of experimental developments that integrate the identified functionalities. Finally, in order to validate our approach, we conducted different experiments with a testing environment simulating a driving scenario. In this framework an interactive system can access a semantic extension of a Telco plataform, based on the standards of the Sensor Web, to acquire contextual information and publish observations that the user performed to the system. The results showed the feasibility of using the SCXML language for designing context-aware interactive systems that require access to advanced sensor platforms for consuming and publishing information while interacting with the user. In the same way, it was shown how the use of semantic technologies in the processes of querying and publication sensor data can assist in reusing and sharing the information published by any application in Sensor Web infrastructures, and thus contribute to realize the future scenario of \Internet of Things".

In-field assessment of batteries and PV modules in a large photovoltaic rural electrification programme

Assuring the sustainability of quality in photovoltaic rural electrification programmes involves enhancing the reliability of the components of solar home systems as well as the characterization of the overall programme cost structure. Batteries and photovoltaic modules have a great impact on both the reliability and the cost assessment, the battery being the weakest component of the solar home system and consequently the most expensive element of the programme. The photovoltaic module, despite being the most reliable component, has a significant impact cost-wise on the initial investment, even at current market prices. This paper focuses on the in-field testing of both batteries and photovoltaic modules working under real operating conditions within a sample of 41 solar home systems belonging to a large photovoltaic rural electrification programme with more than 13,000 installed photovoltaic systems. Different reliability parameters such as lifetime have been evaluated, taking into account different factors, for example energy consumption rates, or the manufacturing quality of batteries. A degradation model has been proposed relating both loss of capacity and time of operation. The user e solar home system binomial is also analysed in order to understand the meaning of battery lifetime in rural electrification.

High-Power High-Efficiency Laser Power Transmission at 100m Using Optimized Multi-Cell GaAs Converter

A high-power high-efficiency laser power transmission system at 100m based on an optimized multi-cell GaAs converter capable of supplying 9.7W of electricity is demonstrated. An I-V testing system integrated with a data acquisition circuit and an analysis software is designed to measure the efficiency and the I-V characteristics of the laser power converter (LPC). The dependencies of the converter’s efficiency with respect to wavelength, laser intensity and temperature are analyzed. A diode laser with 793nm of wavelength and 24W of power is used to test the LPC and the software. The maximum efficiency of the LPC is 48.4% at an input laser power of 8W at room temperature. When the input laser power is 24W (laser intensity of 60000W/m2), the efficiency is 40.4% and the output voltage is 4 V. The overall efficiency from electricity to electricity is 11.6%.

Design of a remote controlled hovercraft

Este informe trata el diseño, desarrollo y construcción de un aerodeslizador de pequeño tamaño, equipado con control remoto que permite al usuario actuar sobre la velocidad y dirección del mismo. Este proyecto podrá ser utilizado en un futuro como base para el desarrollo de aplicaciones más complejas. Un aerodeslizador es un medio de transporte cuyo chasis se eleva sobre el suelo por medio de un motor impulsor que hincha una falda colocada en la parte inferior del mismo. Además, uno o más motores se colocan en la parte trasera del vehículo para propulsarlo. El hecho de que el aerodeslizador no este en contacto directo con la tierra, hace que pueda moverse tanto por tierra como sobre el agua o hielo y que sea capaz de superar pequeños obstáculos. Por otra parte, este hecho se convierte a su vez en un problema debido a que su fuerza de rozamiento al desplazarse es muy pequeña, lo que provoca que sea muy difícil de frenar, y tienda a girar por sí mismo debido a la inercia del movimiento y a las fuerzas provocadas por las corrientes de aire debajo del chasis. Sin embargo, para este proyecto no se ha colocado una falda debajo del mismo, debido a que su diseño es bastante complicado, por lo tanto la fricción con el suelo es menor, aumentando los problemas detallados con anterioridad. El proyecto consta de dos partes, mando a distancia y aerodeslizador, que se conectan a través de antenas de radiofrecuencia (RF). El diseño y desarrollo de cada una ha sido realizado de manera separada exceptuando la parte de las comunicaciones entre ambas. El mando a distancia se divide en tres partes. La primera está compuesta por la interfaz de usuario y el circuito que genera las señales analógicas correspondientes a sus indicaciones. La interfaz de usuario la conforman tres potenciómetros: uno rotatorio y dos deslizantes. El rotatorio se utiliza para controlar la dirección de giro del aerodeslizador, mientras que cada uno de los deslizantes se emplea para controlar la fuerza del motor impulsor y del propulsor respectivamente. En los tres casos los potenciómetros se colocan en el circuito de manera que actúan como divisores de tensión controlables. La segunda parte se compone de un microcontrolador de la familia PSoC. Esta familia de microcontroladores se caracteriza por tener una gran adaptabilidad a la aplicación en la que se quieran utilizar debido a la posibilidad de elección de los periféricos, tanto analógicos como digitales, que forman parte del microcontrolador. Para el mando a distancia se configura con tres conversores A/D que se encargan de transformar las señales procedentes de los potenciómetros, tres amplificadores programables para trabajar con toda la escala de los conversores, un LCD que se utiliza para depurar el código en C con el que se programa y un módulo SPI que es la interfaz que conecta el microcontrolador con la antena. Además, se utilizan cuatro pines externos para elegir el canal de transmisión de la antena. La tercera parte es el módulo transceptor de radio frecuencia (RF) QFM-TRX1-24G, que en el mando a distancia funciona como transmisor. Éste utiliza codificación Manchester para asegurar bajas tasas de error. Como alimentación para los circuitos del mando a distancia se utilizan cuatro pilas AA de 1,5 voltios en serie. En el aerodeslizador se pueden distinguir cinco partes. La primera es el módulo de comunicaciones, que utiliza el mismo transceptor que en el mando a distancia, pero esta vez funciona como receptor y por lo tanto servirá como entrada de datos al sistema haciendo llegar las instrucciones del usuario. Este módulo se comunica con el siguiente, un microcontrolador de la familia PSoC, a través de una interfaz SPI. En este caso el microcontrolador se configura con: un modulo SPI, un LCD utilizado para depurar el código y tres módulos PWM (2 de 8 bits y uno de 16 bits) para controlar los motores y el servo del aerodeslizador. Además, se utilizan cuatro pines externos para seleccionar el canal de recepción de datos. La tercera y cuarta parte se pueden considerar conjuntamente. Ambas están compuestas por el mismo circuito electrónico basado en transistores MOSFET. A la puerta de cada uno de los transistores llega una señal PWM de 100 kilohercios que proviene del microcontrolador, que se encarga de controlar el modo de funcionamiento de los transistores, que llevan acoplado un disipador de calor para evitar que se quemen. A su vez, los transistores hacen funcionar al dos ventiladores, que actúan como motores, el impulsor y el propulsor del aerodeslizador. La quinta y última parte es un servo estándar para modelismo. El servo está controlado por una señal PWM, en la que la longitud del pulso positivo establece la posición de la cabeza del servo, girando en uno u otra dirección según las instrucciones enviadas desde el mando a distancia por el usuario. Para el aerodeslizador se han utilizado dos fuentes de alimentación diferentes: una compuesta por 4 pilas AA de 1,5 voltios en serie que alimentarán al microcontrolador y al servo, y 4 baterías de litio recargables de 3,2 voltios en serie que alimentan el circuito de los motores. La última parte del proyecto es el montaje y ensamblaje final de los dispositivos. Para el chasis del aerodeslizador se ha utilizado una cubierta rectangular de poli-estireno expandido, habitualmente encontrado en el embalaje de productos frágiles. Este material es bastante ligero y con una alta resistencia a los golpes, por lo que es ideal para el propósito del proyecto. En el chasis se han realizado dos agujeros: uno circular situado en el centro del mismo en el se introduce y se ajusta con pegamento el motor impulsor, y un agujero con la forma del servo, situado en uno del los laterales estrechos del rectángulo, en el que se acopla el mismo. El motor propulsor está adherido al cabezal giratorio del servo de manera que rota a la vez que él, haciendo girar al aerodeslizador. El resto de circuitos electrónicos y las baterías se fijan al chasis mediante cinta adhesiva y pegamento procurando en todo momento repartir el peso de manera homogénea por todo el chasis para aumentar la estabilidad del aerodeslizador. SUMMARY: In this final year project a remote controlled hovercraft was designed using mainly technology that is well known by students in the embedded systems programme. This platform could be used to develop further and more complex projects. The system was developed dividing the work into two parts: remote control and hovercraft. The hardware was of the hovercraft and the remote control was designed separately; however, the software was designed at the same time since it was needed to develop the communication system. The result of the project was a remote control hovercraft which has a user friendly interface. The system was designed based on microprocessor technologies and uses common remote control technologies. The system has been designed with technology commonly used by the students in Metropolia University so that it can be readily understood in order to develop other projects based on this platform.

Gesture recognition using mobile phone's inertial sensors

The availability of inertial sensors embedded in mobile devices has enabled a new type of interaction based on the movements or “gestures” made by the users when holding the device. In this paper we propose a gesture recognition system for mobile devices based on accelerometer and gyroscope measurements. The system is capable of recognizing a set of predefined gestures in a user-independent way, without the need of a training phase. Furthermore, it was designed to be executed in real-time in resource-constrained devices, and therefore has a low computational complexity. The performance of the system is evaluated offline using a dataset of gestures, and also online, through some user tests with the system running in a smart phone.

Simulación de seguimiento de blancos en sistemas radar. Parte 2

El proyecto consiste en el diseño y estudio de un software cuyas prestaciones estén orientadas a gestionar una simulación de un sistema de radar. El prototipo de este entorno de simulación se ha realizado en el lenguaje Matlab debido a que inicialmente se considera el más adecuado para el tratamiento de las señales que los sistemas de radar manejan para realizar sus cálculos. Se ha escogido como modelo el software desarrollado por la compañía SAP para gestionar los E.R.P.s de grandes empresas. El motivo es que es un software cuyo diseño y funcionalidad es especialmente adecuado para la gestión ordenada de una cantidad grande de datos diversos de forma integrada. Diseñar e implementar el propio entorno es una tarea de enorme complejidad y que requerirá el esfuerzo de una cantidad importante de personas; por lo que este proyecto se ha limitado, a un prototipo básico con una serie de características mínimas; así como a indicar y dejar preparado el camino por el que deberán transcurrir las futuras agregaciones de funcionalidad o mejoras. Funcionalmente, esto es, independientemente de la implementación específica con la que se construya el entorno de simulación, se ha considerado dividir las características y prestaciones ofrecidas por el sistema en bloques. Estos bloques agruparán los componentes relacionados con un aspecto específico de la simulación, por ejemplo, el bloque 1, es el asignado a todo lo relacionado con el blanco a detectar. El usuario del entorno de simulación interactuará con el sistema ejecutando lo que se llaman transacciones, que son agrupaciones lógicas de datos a introducir/consultar en el sistema relacionados y que se pueden ejecutar de forma independiente. Un ejemplo de transacción es la que permite mantener una trayectoria de un blanco junto con sus parámetros, pero también puede ser una transacción la aplicación que permite por ejemplo, gestionar los usuarios con acceso al entorno. Es decir, las transacciones son el componente mínimo a partir del cual el usuario puede interactuar con el sistema. La interfaz gráfica que se le ofrecerá al usuario, está basada en modos, que se pueden considerar “ventanas” independientes entre sí dentro de las cuáles el usuario ejecuta sus transacciones. El usuario podrá trabajar con cuantos modos en paralelo desee y cambiar según desee entre ellos. La programación del software se ha realizado utilizando la metodología de orientación a objetos y se ha intentado maximizar la reutilización del código así como la configurabilidad de su funcionalidad. Una característica importante que se ha incorporado para garantizar la integridad de los datos es un diccionario sintáctico. Para permitir la persistencia de los datos entre sesiones del usuario se ha implementado una base de datos virtual (que se prevé se reemplace por una real), que permite manejar, tablas, campos clave, etc. con el fin de guardar todos los datos del entorno, tanto los de configuración que solo serían responsabilidad de los administradores/desarrolladores como los datos maestros y transaccionales que serían gestionados por los usuarios finales del entorno de simulación. ABSTRACT. This end-of-degree project comprises the design, study and implementation of a software based application able to simulate the various aspects and performance of a radar system. A blueprint for this application has been constructed upon the Matlab programming language. This is due to the fact that initially it was thought to be the one most suitable to the complex signals radar systems usually process; but it has proven to be less than adequate for all the other core processes the simulation environment must provide users with. The software’s design has been based on another existing software which is the one developed by the SAP company for managing enterprises, a software categorized (and considered the paradigm of) as E.R.P. software (E.R.P. stands for Enterprise Resource Planning). This software has been selected as a model because is very well suited (its basic features) for working in an orderly fashion with a pretty good quantity of data of very diverse characteristics, and for doing it in a way which protects the integrity of the data. To design and construct the simulation environment with all its potential features is a pretty hard task and requires a great amount of effort and work to be dedicated to its accomplishment. Due to this, the scope of this end-of-degree project has been focused to design and construct a very basic prototype with minimal features, but which way future developments and upgrades to the systems features should go has also been pointed. In a purely functional approach, i.e. disregarding completely the specific implementation which accomplishes the simulation features, the different parts or aspects of the simulation system have been divided and classified into blocks. The blocks will gather together and comprise the various components related with a specific aspect of the simulation landscape, for example, block number one will be the one dealing with all the features related to the radars system target. The user interaction with the system will be based on the execution of so called transactions, which essentially consist on bunches of information which logically belong together and can thus be managed together. A good example, could be a transaction which permits to maintain a series of specifications for target’s paths; but it could also be something completely unrelated with the radar system itself as for example, the management of the users who can access the system. Transactions will be thus the minimum unit of interaction of users with the system. The graphic interface provided to the user will be mode based, which can be considered something akin to a set of independent windows which are able on their own to sustain the execution of an independent transaction. The user ideally should be able to work with as many modes simultaneously as he wants to, switching his focus between them at will. The approach to the software construction has been based on the object based paradigm. An effort has been made to maximize the code’s reutilization and also in maximizing its customizing, i.e., same sets of code able to perform different tasks based on configuration data. An important feature incorporated to the software has been a data dictionary (a syntactic one) which helps guarantee data integrity. Another important feature that allow to maintain data persistency between user sessions, is a virtual relational data base (which should in future times become a real data base) which allows to store data in tables. The data store in this tables comprises both the system’s configuration data (which administrators and developers will maintain) and also master and transactional data whose maintenance will be the end users task.

Towards workflow ecosystems through standard representations

Workflows are increasingly used to manage and share scientific computations and methods. Workflow tools can be used to design, validate, execute and visualize scientific workflows and their execution results. Other tools manage workflow libraries or mine their contents. There has been a lot of recent work on workflow system integration as well as common workflow interlinguas, but the interoperability among workflow systems remains a challenge. Ideally, these tools would form a workflow ecosystem such that it should be possible to create a workflow with a tool, execute it with another, visualize it with another, and use yet another tool to mine a repository of such workflows or their executions. In this paper, we describe our approach to create a workflow ecosystem through the use of standard models for provenance (OPM and W3C PROV) and extensions (P-PLAN and OPMW) to represent workflows. The ecosystem integrates different workflow tools with diverse functions (workflow generation, execution, browsing, mining, and visualization) created by a variety of research groups. This is, to our knowledge, the first time that such a variety of workflow systems and functions are integrated.

A control theoretic approach to solve a constrained uplink power dynamic game

This paper addresses an uplink power control dynamic game where we assume that each user battery represents the system state that changes with time following a discrete-time version of a differential game. To overcome the complexity of the analysis of a dynamic game approach we focus on the concept of Dynamic Potential Games showing that the game can be solved as an equivalent Multivariate Optimum Control Problem. The solution of this problem is quite interesting because different users split the activity in time, avoiding higher interferences and providing a long term fairness.

Herramienta de interacción persona-ordenador para la operación de vehículos aéreos no tripulados

En la presente memoria se describe el trabajo de diseño de una herramienta de interacción persona-ordenador (HMI) para la operación y supervisión de vehículos aéreos no tripulados (UAV). En primer lugar se hace una introducción a los tipos de UAVs y aplicaciones más comunes, describiendo sus características técnicas y los componentes que integra en el sistema. Mediante la revisión y análisis de los diferentes niveles de autonomía y las diferentes soluciones de presentación existentes en el mercado, se identifican los modos de operación y componentes principales de la interfaz. A continuación se describe el diseño final del software de la interfaz y el proceso de desarrollo de la misma, para ello se hace un análisis previo del software robótico sobre el que opera el sistema abordo del UAV y se establecen los enlaces de comunicación entre cada uno de los componentes y los requisitos de integración con el sistema. Finalmente, se muestran las pruebas que se han realizado para validar la construcción de la herramienta. This report outlines the design and construction of a human-machine interface (HMI), designed to facilitate the supervision and operation with unmanned aerial vehicles (UAV). First, it is described an introduction to UAVs classification and application fields, reviewing the hardware features and software integration components. In order to define the basic components and operation modes in the general design, a brief review of the different presentation solutions and autonomous levels is described. As a result, it is presented the final software design, the components details and the system integration requirements. Finally, it is also concluded with some of the tests that have been conducted to validate the design and construction of the human-machine interface

Métodos no destructivos para la determinación de firmeza. Sensores de Aceleración. Impactadores.

Impact techniques can be used to evaluate firmness on fruit. Chen and Ruiz-Altisent developed and used a 50,4 g impactor with a 19 mm diameter spherical tip, dropping from different heights onto the fruit. Another impactor device is a semispherical impacting tip attached to the end of a pivoting arm. In both devices a small accelerometer is mounted behind the impacting tip. Prototype lateral impactor on-line sorting system for high-speed firmness sorting of fruits has been developed and tested. Preliminary results shows that is possible its use on-line. The last version of an impact device has new elements that improve the data resolution, the signal-noise ratio and the precision.

Integrating software testing and run-time checking in an assertion verification framework

We have designed and implemented a framework that unifies unit testing and run-time verification (as well as static verification and static debugging). A key contribution of our approach is that a unified assertion language is used for all of these tasks. We first propose methods for compiling runtime checks for (parts of) assertions which cannot be verified at compile-time via program transformation. This transformation allows checking preconditions and postconditions, including conditional postconditions, properties at arbitrary program points, and certain computational properties. The implemented transformation includes several optimizations to reduce run-time overhead. We also propose a minimal addition to the assertion language which allows defining unit tests to be run in order to detect possible violations of the (partial) specifications expressed by the assertions. This language can express for example the input data for performing the unit tests or the number of times that the unit tests should be repeated. We have implemented the framework within the Ciao/CiaoPP system and effectively applied it to the verification of ISO-prolog compliance and to the detection of different types of bugs in the Ciao system source code. Several experimental results are presented that ¡Ilústrate different trade-offs among program size, running time, or levéis of verbosity of the messages shown to the user.

Integrating software testing and run-time checking in an assertion verification framework.

We have designed and implemented a framework that unifies unit testing and run-time verification (as well as static verification and static debugging). A key contribution of our approach is that a unified assertion language is used for all of these tasks. We first propose methods for compiling runtime checks for (parts of) assertions which cannot be verified at compile-time via program transformation. This transformation allows checking preconditions and postconditions, including conditional postconditions, properties at arbitrary program points, and certain computational properties. The implemented transformation includes several optimizations to reduce run-time overhead. We also propose a minimal addition to the assertion language which allows defining unit tests to be run in order to detect possible violations of the (partial) specifications expressed by the assertions. This language can express for example the input data for performing the unit tests or the number of times that the unit tests should be repeated. We have implemented the framework within the Ciao/CiaoPP system and effectively applied it to the verification of ISO-prolog compliance and to the detection of different types of bugs in the Ciao system source code. Several experimental results are presented that illustrate different trade-offs among program size, running time, or levels of verbosity of the messages shown to the user.