Efficient top-down set-sharing analysis using cliques

Abstract. We study the problem of efficient, scalable set-sharing analysis of logic programs. We use the idea of representing sharing information as a pair of abstract substitutions, one of which is a worst-case sharing representation called a clique set, which was previously proposed for the case of inferring pair-sharing. We use the clique-set representation for (1) inferring actual set-sharing information, and (2) analysis within a top-down framework. In particular, we define the new abstract functions required by standard top-down analyses, both for sharing alone and also for the case of including freeness in addition to sharing. We use cliques both as an alternative representation and as widening, defining several widening operators. Our experimental evaluation supports the conclusión that, for inferring set-sharing, as it was the case for inferring pair-sharing, precisión losses are limited, while useful efficieney gains are obtained. We also derive useful conclusions regarding the interactions between thresholds, precisión, efficieney and cost of widening. At the limit, the clique-set representation allowed analyzing some programs that exceeded memory capacity using classical sharing representations.

Deriving a fixpoint computation algorithm for top-down abstract interpretation of logic programs

Bruynooghe described a framework for the top-down abstract interpretation of logic programs. In this framework, abstract interpretation is carried out by constructing an abstract and-or tree in a top-down fashion for a given query and program. Such an abstract interpreter requires fixpoint computation for programs which contain recursive predicates. This paper presents in detail a fixpoint algorithm that has been developed for this purpose and the motivation behind it. We start off by describing a simple-minded algorithm. After pointing out its shortcomings, we present a series of refinements to this algorithm, until we reach the final version. The aim is to give an intuitive grasp and provide justification for the relative complexity of the final algorithm. We also present an informal proof of correctness of the algorithm and some results obtained from an implementation.

Exploiting goal independence in the analysis of logic programs

This paper illustrates the use of a top-down framework to obtain goal independent analyses of logic programs, a task which is usually associated with the bottom-up approach. While it is well known that the bottomup approach can be used, through the magic set transformation, for goal dependent analysis, it is less known that the top-down approach can be used for goal independent analysis. The paper describes two ways of doing the latter. We show how the results of a goal independent analysis can be used to speed up subsequent goal dependent analyses. However this speed-up may result in a loss of precisión. The influence of domain characteristics on this precisión is discussed and an experimental evaluation using a generic top-down analyzer is described.

A fitting algorithm for random modeling the PLC channel

The characteristics of the power-line communication (PLC) channel are difficult to model due to the heterogeneity of the networks and the lack of common wiring practices. To obtain the full variability of the PLC channel, random channel generators are of great importance for the design and testing of communication algorithms. In this respect, we propose a random channel generator that is based on the top-down approach. Basically, we describe the multipath propagation and the coupling effects with an analytical model. We introduce the variability into a restricted set of parameters and, finally, we fit the model to a set of measured channels. The proposed model enables a closed-form description of both the mean path-loss profile and the statistical correlation function of the channel frequency response. As an example of application, we apply the procedure to a set of in-home measured channels in the band 2-100 MHz whose statistics are available in the literature. The measured channels are divided into nine classes according to their channel capacity. We provide the parameters for the random generation of channels for all nine classes, and we show that the results are consistent with the experimental ones. Finally, we merge the classes to capture the entire heterogeneity of in-home PLC channels. In detail, we introduce the class occurrence probability, and we present a random channel generator that targets the ensemble of all nine classes. The statistics of the composite set of channels are also studied, and they are compared to the results of experimental measurement campaigns in the literature.

Desarrollo de capacidades para el liderazgo en proyectos de desarrollo rural. Aplicación a comunidades Aymaras

Los proyectos de desarrollo en el medio rural han cambiado en las últimas décadas, desde un enfoque tecnocrático y descendente, que resultó insuficiente, a otro que otorga un papel principal a las personas locales. En este contexto, los nuevos modelos de planificación y gestión de los proyectos de desarrollo a menudo incluyen entre sus objetivos el desarrollo de las capacidades locales y el liderazgo, dedicándose a ellos anualmente billones de dólares. Ambos conceptos son considerados elementos indispensables para aumentar la sostenibilidad de las acciones desde un enfoque endógeno, lo que genera un gran interés tanto desde el ámbito científico como en los debates y objetivos de los organismos internacionales. Sin embargo no existe un consenso sobre el marco conceptual del desarrollo de capacidades ni sobre las metodologías adecuadas para evaluarlo. Por otra parte, en el caso del desarrollo de liderazgo, la mayoría de los estudios e investigaciones se han centrado en entornos empresariales, siendo escasos los trabajos centrados en el ámbito rural. En dicho contexto, la complejidad se incrementa debido a que a menudo la autoridad y poder de los líderes no están dados por puestos formales, sino por relaciones sociales y vínculos de confianza. Esta investigación presenta una primera fase conceptual, que aborda el marco teórico, analizando y clarificando los conceptos de desarrollo de capacidades, competencias y liderazgo en el contexto de los proyectos de desarrollo rural. Así mismo, en esta fase se clasifican los principales instrumentos para evaluar el desarrollo de capacidades, para así definir las variables que conforman el constructo de capacidades. Además se determina la multidimensionalidad del concepto de capacidades y por ello la conveniencia de abordarlo a nivel individual y colectivo. También se analizan los distintos estilos de liderazgo para llegar a una definición propia de desarrollo de capacidades y de liderazgo adaptadas al medio rural. El marco teórico anterior permite sentar, en una segunda fase de la investigación, las bases científicas del modelo que se propone: el modelo DCL de Desarrollo de Capacidades para el Liderazgo en los proyectos de desarrollo rural. Este modelo incorpora elementos del marco conceptual Working With People (Cazorla et al., 2013), fruto de 25 años de experiencia en el ámbito de la planificación de proyectos de desarrollo rural desde el grupo de investigación GESPLAN de la Universidad Politécnica de Madrid. El modelo DCL integra metodologías cuantitativas y cualitativas y una doble escala de análisis para promover y evaluar el desarrollo de capacidades en la población local desde tres componentes: técnico-empresarial, relacional y contextual. Además el modelo DCL incorpora un proceso metodológico para poder integrar el seguimiento y la evaluación de las capacidades a lo largo del ciclo del proyecto. Finalmente, en una fase de aplicación, se acomete la validación del modelo DCL a través del caso de estudio de un proyecto de desarrollo con una organización de mujeres artesanas de comunidades aymaras de Puno (Perú). Este proyecto, que incorpora el marco conceptual WWP, integra 5 años de experiencia con comunidades aymaras desde el grupo de investigación GESPLAN. La aplicación muestra cómo el modelo DCL permite evaluar el desarrollo de capacidades para el liderazgo. Así mismo, la incorporación de los aprendizajes tras las evaluaciones de desarrollo de capacidades permite reorientar las acciones del proyecto para mejorar su planificación y gestión y producir un verdadero empoderamiento y liderazgo de la organización local. Lo anterior se traduce en un aumento de la sostenibilidad del proyecto y de la resiliencia social de la organización. ABSTRACT Development projects in rural areas have changed in recent decades, from a technocratic and top-down approach, which proved insufficient, to another that gives a major role to local people. In this context, the new models of planning and management of development projects often include among their objectives the development of local capacities and leadership and engage billions of dollars annually. Both concepts are considered essential for enhancing the sustainability of the actions from an endogenous approach, generating great interest both from the scientific field and in the debates and objectives of international organizations. However there is no consensus on the conceptual framework of capacity development and on appropriate methodologies to evaluate it. Moreover, in the case of leadership development, most of the studies and research have focused on business environments, with few studies focusing on rural areas. In this context, the complexity is increased because often the authority and power of the leaders are not given for formal positions, but by social relationships and bonds of trust. This research presents an initial conceptual phase, which addresses the theoretical framework, analyzing and clarifying the concepts of capacity development, competencies and leadership in the context of rural development projects. Also, at this stage the main instruments to assess capacity development are classified so as to define the variables that shape the capacity construct. Besides the multidimensionality of the concept of capacity is determined and therefore the convenience of addressing it at an individual and colective level. Different leadership styles are also analyzed to propose a definition of capacity development and leadership adapted to the rural environment. The above theoretical framework allows to set, in a second research phase, the scientific basis of the proposed model: the model DCL of Capacity Development for Leadership in rural development projects. This model incorporates elements of the conceptual framework Working With People (Cazorla et al., 2013), the result of 25 years of experience in the field of project planning for rural development from the research group GESPLAN of the Technical University of Madrid. The DCL model integrates quantitative and qualitative methodologies and a double scale of analysis to promote and evaluate capacity development in the local population from three components: technical-entrepreneurial, relational and contextual. Besides the DCL model incorporates a methodological process to integrate monitoring and evaluation of capacities throughout the project cycle. Finally, in an application phase, DCL model validation is undertaken through the case study of a development project with an organization of women artisans of Aymara communities in Puno (Peru). This project, that incorporates the WWP conceptual framework, integrates 5 years of experience with Aymara communities from GESPLAN research group. The application shows how the DCL model allows to assess the development of capacities for leadership. Also, the incorporation of lessons learned after monitoring and evaluation of capacity development allows to redirect actions to improve project planning and management and produce a true empowerment and leadership of the local organization. This translates into increased project sustainability and social resilience of the organization.

Lock-free Parallel Dynamic Programming

We show a method for parallelizing top down dynamic programs in a straightforward way by a careful choice of a lock-free shared hash table implementation and randomization of the order in which the dynamic program computes its subproblems. This generic approach is applied to dynamic programs for knapsack, shortest paths, and RNA structure alignment, as well as to a state-of-the-art solution for minimizing the máximum number of open stacks. Experimental results are provided on three different modern multicore architectures which show that this parallelization is effective and reasonably scalable. In particular, we obtain over 10 times speedup for 32 threads on the open stacks problem.

Evaluación de la profundidad de la fisuración superficial descendente en pavimentos asfálticos mediante técnicas de ultrasonidos. Validación teórico-práctica y modelos

La fisuración iniciada en la superficie de los pavimentos asfálticos constituye uno de los más frecuentes e importantes modos de deterioro que tienen lugar en los firmes bituminosos, como han demostrado los estudios teóricos y experimentales llevados a cabo en la última década. Sin embargo, este mecanismo de fallo no ha sido considerado por los métodos tradicionales de diseño de estos firmes. El concepto de firmes de larga duración se fundamenta en un adecuado seguimiento del proceso de avance en profundidad de estos deterioros y la intervención en el momento más apropiado para conseguir mantenerlos confinados como fisuras de profundidad parcial en la capa superficial más fácilmente accesible y reparable, de manera que pueda prolongarse la durabilidad y funcionalidad del firme y reducir los costes generalizados de su ciclo de vida. Por lo tanto, para la selección de la estrategia óptima de conservación de los firmes resulta esencial disponer de metodologías que posibiliten la identificación precisa in situ de la fisuración descendente, su seguimiento y control, y que además permitan una determinación fiable y con alto rendimiento de su profundidad y extensión. En esta Tesis Doctoral se presentan los resultados obtenidos mediante la investigación sistemática de laboratorio e in situ llevada a cabo para la obtención de datos sobre fisuración descendente en firmes asfálticos y para el estudio de procedimientos de evaluación de la profundidad de este tipo de fisuras empleando técnicas de ultrasonidos. Dichos resultados han permitido comprobar que la metodología no destructiva propuesta, de rápida ejecución, bajo coste y sencilla implementación (principalmente empleada hasta el momento en estructuras metálicas y de hormigón, debido a las dificultades que introduce la naturaleza viscoelástica de los materiales bituminosos) puede ser aplicada con suficiente fiabilidad y repetibilidad sobre firmes asfálticos. Las medidas resultan asimismo independientes del espesor total del firme. Además, permite resolver algunos de los inconvenientes frecuentes que presentan otros métodos de diagnóstico de las fisuras de pavimentos, tales como la extracción de testigos (sistema destructivo, de alto coste y prolongados tiempos de interrupción del tráfico) o algunas otras técnicas no destructivas como las basadas en medidas de deflexiones o el georradar, las cuales no resultan suficientemente precisas para la investigación de fisuras superficiales. Para ello se han realizado varias campañas de ensayos sobre probetas de laboratorio en las que se han estudiado diferentes condiciones empíricas como, por ejemplo, distintos tipos de mezclas bituminosas en caliente (AC, SMA y PA), espesores de firme y adherencias entre capas, temperaturas, texturas superficiales, materiales de relleno y agua en el interior de las grietas, posición de los sensores y un amplio rango de posibles profundidades de fisura. Los métodos empleados se basan en la realización de varias medidas de velocidad o de tiempo de transmisión del pulso ultrasónico sobre una única cara o superficie accesible del material, de manera que resulte posible obtener un coeficiente de transmisión de la señal (mediciones relativas o autocompensadas). Las mediciones se han realizado a bajas frecuencias de excitación mediante dos equipos de ultrasonidos diferentes dotados, en un caso, de transductores de contacto puntual seco (DPC) y siendo en el otro instrumento de contacto plano a través de un material especialmente seleccionado para el acoplamiento (CPC). Ello ha permitido superar algunos de los tradicionales inconvenientes que presenta el uso de los transductores convencionales y no precisar preparación previa de las superficies. La técnica de autocalibración empleada elimina los errores sistemáticos y la necesidad de una calibración local previa, demostrando el potencial de esta tecnología. Los resultados experimentales han sido comparados con modelos teóricos simplificados que simulan la propagación de las ondas ultrasónicas en estos materiales bituminosos fisurados, los cuales han sido deducidos previamente mediante un planteamiento analítico y han permitido la correcta interpretación de dichos datos empíricos. Posteriormente, estos modelos se han calibrado mediante los resultados de laboratorio, proporcionándose sus expresiones matemáticas generalizadas y gráficas para su uso rutinario en las aplicaciones prácticas. Mediante los ensayos con ultrasonidos efectuados en campañas llevadas a cabo in situ, acompañados de la extracción de testigos del firme, se han podido evaluar los modelos propuestos. El máximo error relativo promedio en la estimación de la profundidad de las fisuras al aplicar dichos modelos no ha superado el 13%, con un nivel de confianza del 95%, en el conjunto de todos los ensayos realizados. La comprobación in situ de los modelos ha permitido establecer los criterios y las necesarias recomendaciones para su utilización sobre firmes en servicio. La experiencia obtenida posibilita la integración de esta metodología entre las técnicas de auscultación para la gestión de su conservación. Abstract Surface-initiated cracking of asphalt pavements constitutes one of the most frequent and important types of distress that occur in flexible bituminous pavements, as clearly has been demonstrated in the technical and experimental studies done over the past decade. However, this failure mechanism has not been taken into consideration for traditional methods of flexible pavement design. The concept of long-lasting pavements is based on adequate monitoring of the depth and extent of these deteriorations and on intervention at the most appropriate moment so as to contain them in the surface layer in the form of easily-accessible and repairable partial-depth topdown cracks, thereby prolonging the durability and serviceability of the pavement and reducing the overall cost of its life cycle. Therefore, to select the optimal maintenance strategy for perpetual pavements, it becomes essential to have access to methodologies that enable precise on-site identification, monitoring and control of top-down propagated cracks and that also permit a reliable, high-performance determination of the extent and depth of cracking. This PhD Thesis presents the results of systematic laboratory and in situ research carried out to obtain information about top-down cracking in asphalt pavements and to study methods of depth evaluation of this type of cracking using ultrasonic techniques. These results have demonstrated that the proposed non-destructive methodology –cost-effective, fast and easy-to-implement– (mainly used to date for concrete and metal structures, due to the difficulties caused by the viscoelastic nature of bituminous materials) can be applied with sufficient reliability and repeatability to asphalt pavements. Measurements are also independent of the asphalt thickness. Furthermore, it resolves some of the common inconveniences presented by other methods used to evaluate pavement cracking, such as core extraction (a destructive and expensive procedure that requires prolonged traffic interruptions) and other non-destructive techniques, such as those based on deflection measurements or ground-penetrating radar, which are not sufficiently precise to measure surface cracks. To obtain these results, extensive tests were performed on laboratory specimens. Different empirical conditions were studied, such as various types of hot bituminous mixtures (AC, SMA and PA), differing thicknesses of asphalt and adhesions between layers, varied temperatures, surface textures, filling materials and water within the crack, different sensor positions, as well as an ample range of possible crack depths. The methods employed in the study are based on a series of measurements of ultrasonic pulse velocities or transmission times over a single accessible side or surface of the material that make it possible to obtain a signal transmission coefficient (relative or auto-calibrated readings). Measurements were taken at low frequencies by two short-pulse ultrasonic devices: one equipped with dry point contact transducers (DPC) and the other with flat contact transducers that require a specially-selected coupling material (CPC). In this way, some of the traditional inconveniences presented by the use of conventional transducers were overcome and a prior preparation of the surfaces was not required. The auto-compensating technique eliminated systematic errors and the need for previous local calibration, demonstrating the potential for this technology. The experimental results have been compared with simplified theoretical models that simulate ultrasonic wave propagation in cracked bituminous materials, which had been previously deduced using an analytical approach and have permitted the correct interpretation of the aforementioned empirical results. These models were subsequently calibrated using the laboratory results, providing generalized mathematical expressions and graphics for routine use in practical applications. Through a series of on-site ultrasound test campaigns, accompanied by asphalt core extraction, it was possible to evaluate the proposed models, with differences between predicted crack depths and those measured in situ lower than 13% (with a confidence level of 95%). Thereby, the criteria and the necessary recommendations for their implementation on in-service asphalt pavements have been established. The experience obtained through this study makes it possible to integrate this methodology into the evaluation techniques for pavement management systems.

Automated attribute inference in complex service workflows based on sharing analysis

The properties of data and activities in business processes can be used to greatly facilítate several relevant tasks performed at design- and run-time, such as fragmentation, compliance checking, or top-down design. Business processes are often described using workflows. We present an approach for mechanically inferring business domain-specific attributes of workflow components (including data Ítems, activities, and elements of sub-workflows), taking as starting point known attributes of workflow inputs and the structure of the workflow. We achieve this by modeling these components as concepts and applying sharing analysis to a Horn clause-based representation of the workflow. The analysis is applicable to workflows featuring complex control and data dependencies, embedded control constructs, such as loops and branches, and embedded component services.

Goal dependent vs goal independent analysis of logic programs

Goal independent analysis of logic programs is commonly discussed in the context of the bottom-up approach. However, while the literature is rich in descriptions of top-down analysers and their application, practical experience with bottom-up analysis is still in a preliminary stage. Moreover, the practical use of existing top-down frameworks for goal independent analysis has not been addressed in a practical system. We illustrate the efficient use of existing goal dependent, top-down frameworks for abstract interpretation in performing goal independent analyses of logic programs much the same as those usually derived from bottom-up frameworks. We present several optimizations for this flavour of top-down analysis. The approach is fully implemented within an existing top-down framework. Several implementation tradeoffs are discussed as well as the influence of domain characteristics. An experimental evaluation including a comparison with a bottom-up analysis for the domain Prop is presented. We conclude that the technique can offer advantages with respect to standard goal dependent analyses.

Policy processes and collective action in water reforms: the cases of Nicaragua and Suriname

Las reformas de agua en países en desarrollo suelen llevarse a cabo junto con cambios institucionales más profundos o, incluso, acompañadas de cambios constitucionales o de régimen político. Por lo tanto, los marcos institucionales adaptados a países gobernados sujetos al estado de derecho pueden no ser apropiados para contextos gobernados fundamentalmente, al menos en sus inicios, por instituciones informales o poco maduras. Esta tesis toma las reformas de agua como punto de partida y pretende contribuir a la literatura mediante una serie de análisis empíricos tanto del ámbito general como del plano individual o sujeto personal de la política del agua. En el ámbito general, el foco se pone en los factores que explican el fallo de la acción colectiva en dos contextos diferentes: 1) en la implementación de la nueva Ley de Aguas de Nicaragua y 2) en el mantenimiento y revitalización de las instituciones de riego en Surinam. En el plano del individuo, la investigación se centra en las decisiones de los usuarios de los recursos y analiza el papel crítico de las variables sociales para la gestión de los recursos comunes. Para ello, el método de investigación utilizado es mixto, combinando el análisis de entrevistas, encuestas y experimentos. En el ámbito general, los resultados muestran que las principales barreras para la implementación de la nueva Ley de Aguas de Nicaragua podrían tener su reflejo en el lenguaje de la Ley y, por tanto, en la forma en la que se definen y configuran las instituciones incluidas en dicha Ley. Así, la investigación demuestra que la implementación de políticas no puede ser estudiada o entendida sin tener en cuenta tanto el diseño de la propia política como el marco socio-ecológico en el que se enmarca. El contexto específico de Nicaragua remarca la importancia de considerar tanto las instituciones formales como informales en los procesos de transición política. A pesar de que las reformas de agua requieren plazos largos para su implementación, el hecho de que exista una diferencia entre las reglas tal cual se definen formalmente y las reglas que operan en la realidad merece una mayor consideración en el diseño de políticas basadas fundamentalmente en instituciones formales. En el ámbito de la conducta individual, el análisis de la acción colectiva ofrece una serie de observaciones empíricas interesantes. En el caso de Nicaragua, los resultados indican que la intensidad de las relaciones sociales, el tipo de agentes dispuestos a proporcionar apoyo social y el nivel de confianza en la comunidad son factores que explican de manera significativa la participación en la comunidad. Sin embargo, el hecho de que la gestión colectiva de riego se produzca, en la mayoría de casos, en torno a lazos familiares sugiere que las variables de capital social críticas se definen en gran medida en la esfera familiar, siendo difícil que se extiendan fuera de estos nexos. El análisis experimental de los resultados de un juego de uso de recurso común y contribución al bien público muestra que las preferencias pro-sociales de los individuos y la heterogeneidad del grupo en términos de composición por sexo son factores que explican significativamente los resultados y las decisiones de apropiación a lo largo del juego. En términos del diseño de las políticas, es fundamental tener en cuenta las dinámicas de participación y uso de los recursos comunes de manera que los niveles de cooperación puedan mantenerse en el largo plazo, lo cual, como se observa en el caso de Surinam, no es siempre posible. Finalmente, el caso de Surinam es un ejemplo ilustrativo de los procesos de acción colectiva en economías en transición. El análisis del fallo de la acción colectiva en Surinam muestra que los procesos políticos vinculados al período colonial y de independencia explican en gran medida la falta de claridad en las reglas operacionales y colectivas que gobiernan la gestión de los sistemas de riego y drenaje. Los resultados empíricos sugieren que a pesar de que la acción colectiva para la provisión de los servicios de riego y drenaje estaba bien establecida bajo el régimen colonial, la auto-organización no prosperó en un contexto dependiente del apoyo externo y regido fundamentalmente por reglas diseñadas al nivel competencial del gobierno central. El sistema socio-ecológico que se desarrolló durante la transición post-colonial favoreció, así, la emergencia de comportamientos oportunistas, y posteriormente la inoperancia de los Water Boards (WBs) creados en la época colonial. En este sentido, cualquier intento por revitalizar los WBs y fomentar el desarrollo de la auto-organización de los usuarios necesitará abordar los problemas relacionados con los patrones demográficos, incluyendo la distribución de la tierra, el diseño de instituciones y la falta de confianza en el gobierno, además de las inversiones típicas en infraestructura y sistemas de información hidrológicos. El liderazgo del gobierno, aportando empuje de arriba-abajo, es, además, otro elemento imprescindible en Surinam. ABSTRACT Water reforms in developing countries take place along deeper institutional and even constitutional. Therefore, institutional frameworks that might result in positive outcomes in countries governed by the rule of law might not fit in contexts governed mainly by informal or immature institutions. This thesis takes water reforms as the starting point and aims to contribute to the literature by presenting several conceptual and empirical analyses at both general and individual levels. At the general national level, the focus is on the factors explaining failure of collective action in two different settings: 1) in the implementation of the new Nicaraguan Water Law and 2) in sustaining and revitalizing irrigation institutions in Suriname. At the individual level, the research focuses on the actions of resource users and analyzes the critical role of social variables for common pool resources management. For this purpose, the research presented in this thesis makes use of a mixed-method approach, combining interviews, surveys and experimental methods. Overall, the results show that major barriers for the implementation of the new Nicaraguan Water Law have its reflection on the language of the Law and, therefore, on the way institutions are defined and configured. In this sense, our study shows that implementation cannot fruitfully be studied and understood without taking into account both the policy design and the social-ecological context in which it is framed. The specific setting of Nicaragua highlights the relevance of considering both formal and informal institutions when promoting policy transitions. Despite the unquestionable fact that water reforms implementation needs long periods of time, there is still a gap between the rules on paper and the rules on the ground that deserves further attention when proposing policy changes on the basis of formal institutions. At the level of the individual agent, the analysis of collective action provides a number of interesting empirical insights. In the case of Nicaragua, I found that the intensity of social networks, the type of agents willing to provide social support and the level of trust in the community are all significant factors in explaining collective action at community level. However, the fact that most collective irrigation relies on family ties suggests that critical social capital variables might be defined within the family sphere and making it difficult to go beyond it. Experimental research combining a common pool resource and a public good game in Nicaragua shows that individuals’ pro-social traits and group heterogeneity in terms of sex composition are significant variables in explaining efficiency outcomes and effort decisions along the game. Thus, with regard to policy design, it is fundamental to consider carefully the dynamics of agents' participation and use of common pool resources, for sustaining cooperation in the long term, which, as seen in the case and Surinam, is not always possible. The case of Suriname provides a rich setting for the analysis of collective action in transition economies. The analysis of decay of collective irrigation in Suriname shows that the lack of clear operational and collective choice rules appear to be rooted in deeper political processes that date back to the colonial period. The empirical findings suggest that despite collective action for the provision of irrigation and drainage services was well established during the colonial period, self-organization did not flourish in a context governed by colonial state-crafted rules and mostly dependent on external support. The social-ecological system developed during the post-colonial transition process favored the emergence of opportunistic behavior. In this respect, any attempt to revitalize WBs and support self-organization will need to tackle the problems derived from demographic patterns, including land allocation, institutions design and government distrust, in addition to the typical investments in both physical infrastructure and hydrological information systems. The leadership role of the government, acting as a top-down trigger, is another essential element in Suriname.

Analyzing intergibles in rural development project management

Facing the frequent failure of projects in rural areas with top-down approaches, there has been a promotion of participation of the local people in decisions that affect their territories (bottom-up approach) to promote sustainable regional development (Chambers, 1997; Lusthaus et al., 1999; Horton, 2004; Vazquez-Barquero, 2000). In fact participation was deemed necessary to ensure the success and sustainability of projects (UNDP, 2006; WRI, 2008; Davies, 2009). Hence, the progressive strengthening of the local population should be promoted so that they can acquire a range of skills and knowledge that allow them to manage resources properly and undertake productive activities in their territory (Contreras, 2000). These are intangibles and therefore difficult to measure. Hence, in this research a model of integration of intangibles in rural development projects management is proposed. The model designed supplements and enriches the conceptual framework ?Working with People? WWP (Cazorla et al, 2013).

Self assembled and ordered group III nitride nanocolumnar structures for light emitting applications

El objetivo de este trabajo es un estudio profundo del crecimiento selectivo de nanoestructuras de InGaN por epitaxia de haces moleculares asistido por plasma, concentrandose en el potencial de estas estructuras como bloques constituyentes en LEDs de nueva generación. Varias aproximaciones al problema son discutidas; desde estructuras axiales InGaN/GaN, a estructuras core-shell, o nanoestructuras crecidas en sustratos con orientaciones menos convencionales (semi polar y no polar). La primera sección revisa los aspectos básicos del crecimiento auto-ensamblado de nanocolumnas de GaN en sustratos de Si(111). Su morfología y propiedades ópticas son comparadas con las de capas compactas de GaN sobre Si(111). En el caso de las columnas auto-ensambladas de InGaN sobre Si(111), se presentan resultados sobre el efecto de la temperatura de crecimiento en la incorporación de In. Por último, se discute la inclusión de nanodiscos de InGaN en las nanocolumnas de GaN. La segunda sección revisa los mecanismos básicos del crecimiento ordenado de nanoestructuras basadas en GaN, sobre templates de GaN/zafiro. Aumentando la relación III/V localmente, se observan cambios morfológicos; desde islas piramidales, a nanocolumnas de GaN terminadas en planos semipolares, y finalmente, a nanocolumnas finalizadas en planos c polares. Al crecer nanodiscos de InGaN insertados en las nanocolumnas de GaN, las diferentes morfologias mencionadas dan lugar a diferentes propiedades ópticas de los nanodiscos, debido al diferente carácter (semi polar o polar) de los planos cristalinos involucrados. La tercera sección recoge experimentos acerca de los efectos que la temperatura de crecimiento y la razón In/Ga tienen en la morfología y emisión de nanocolumnas ordenadas de InGaN crecidas sobre templates GaN/zafiro. En el rango de temperaturas entre 650 y 750 C, la incorporacion de In puede modificarse bien por la temperatura de crecimiento, o por la razón In/Ga. Controlar estos factores permite la optimización de la longitud de onda de emisión de las nanocolumnas de InGaN. En el caso particular de la generación de luz blanca, se han seguidos dos aproximaciones. En la primera, se obtiene emisión amarilla-blanca a temperatura ambiente de nanoestructuras donde la región de InGaN consiste en un gradiente de composiciones de In, que se ha obtenido a partir de un gradiente de temperatura durante el crecimiento. En la segunda, el apilamiento de segmentos emitiendo en azul, verde y rojo, consiguiendo la integración monolítica de estas estructuras en cada una de las nanocolumnas individuales, da lugar a emisores ordenados con un amplio espectro de emisión. En esta última aproximación, la forma espectral puede controlarse con la longitud (duración del crecimiento) de cada uno de los segmentos de InGaN. Más adelante, se presenta el crecimiento ordenado, por epitaxia de haces moleculares, de arrays de nanocolumnas que son diodos InGaN/GaN cada una de ellas, emitiendo en azul (441 nm), verde (502 nm) y amarillo (568 nm). La zona activa del dispositivo consiste en una sección de InGaN, de composición constante nominalmente y longitud entre 250 y 500 nm, y libre de defectos extendidos en contraste con capas compactas de InGaN de similares composiciones y espesores. Los espectros de electroluminiscencia muestran un muy pequeño desplazamiento al azul al aumentar la corriente inyectada (desplazamiento casi inexistente en el caso del dispositivo amarillo), y emisiones ligeramente más anchas que en el caso del estado del arte en pozos cuánticos de InGaN. A continuación, se presenta y discute el crecimiento ordenado de nanocolumnas de In(Ga)N/GaN en sustratos de Si(111). Nanocolumnas ordenadas emitiendo desde el ultravioleta (3.2 eV) al infrarrojo (0.78 eV) se crecieron sobre sustratos de Si(111) utilizando una capa compacta (“buffer”) de GaN. La morfología y eficiencia de emisión de las nanocolumnas emitiendo en el rango espectral verde pueden ser mejoradas ajustando las relaciones In/Ga y III/N, y una eficiencia cuántica interna del 30% se deriva de las medidas de fotoluminiscencia en nanocolumnas optimizadas. En la siguiente sección de este trabajo se presenta en detalle el mecanismo tras el crecimiento ordenado de nanocolumnas de InGaN/GaN emitiendo en el verde, y sus propiedades ópticas. Nanocolumnas de InGaN/GaN con secciones largas de InGaN (330-830 nm) se crecieron tanto en sustratos GaN/zafiro como GaN/Si(111). Se encuentra que la morfología y la distribución espacial del In dentro de las nanocolumnas dependen de las relaciones III/N e In/Ga locales en el frente de crecimiento de las nanocolumnas. La dispersión en el contenido de In entre diferentes nanocolumnas dentro de la misma muestra es despreciable, como indica las casi identicas formas espectrales de la catodoluminiscencia de una sola nanocolumna y del conjunto de ellas. Para las nanocolumnas de InGaN/GaN crecidas sobre GaN/Si(111) y emitiendo en el rango espectral verde, la eficiencia cuántica interna aumenta hasta el 30% al disminuir la temperatura de crecimiento y aumentar el nitrógeno activo. Este comportamiento se debe probablemente a la formación de estados altamente localizados, como indica la particular evolución de la energía de fotoluminiscencia con la temperatura (ausencia de “s-shape”) en muestras con una alta eficiencia cuántica interna. Por otro lado, no se ha encontrado la misma dependencia entre condiciones de crecimiento y efiencia cuántica interna en las nanoestructuras InGaN/GaN crecidas en GaN/zafiro, donde la máxima eficiencia encontrada ha sido de 3.7%. Como alternativa a las nanoestructuras axiales de InGaN/GaN, la sección 4 presenta resultados sobre el crecimiento y caracterización de estructuras core-shell de InGaN/GaN, re-crecidas sobre arrays de micropilares de GaN fabricados por ataque de un template GaN/zafiro (aproximación top-down). El crecimiento de InGaN/GaN es conformal, con componentes axiales y radiales en el crecimiento, que dan lugar a la estructuras core-shell con claras facetas hexagonales. El crecimiento radial (shell) se ve confirmado por medidas de catodoluminiscencia con resolución espacial efectuadas en un microscopio electrónico de barrido, asi como por medidas de microscopía de transmisión de electrones. Más adelante, el crecimiento de micro-pilares core-shell de InGaN se realizó en pilares GaN (cores) crecidos selectivamente por epitaxia de metal-orgánicos en fase vapor. Con el crecimiento de InGaN se forman estructuras core-shell con emisión alrededor de 3 eV. Medidas de catodoluminiscencia resuelta espacialmente indican un aumento en el contenido de indio del shell en dirección a la parte superior del pilar, que se manifiesta en un desplazamiento de la emisión de 3.2 eV en la parte inferior, a 3.0 eV en la parte superior del shell. Este desplazamiento está relacionado con variaciones locales de la razón III/V en las facetas laterales. Finalmente, se demuestra la fabricación de una estructura pin basada en estos pilares core-shell. Medidas de electroluminiscencia resuelta espacialmente, realizadas en pilares individuales, confirman que la electroluminiscencia proveniente del shell de InGaN (diodo lateral) está alrededor de 3.0 eV, mientras que la emisión desde la parte superior del pilar (diodo axial) está alrededor de 2.3 eV. Para finalizar, se presentan resultados sobre el crecimiento ordenado de GaN, con y sin inserciones de InGaN, en templates semi polares (GaN(11-22)/zafiro) y no polares (GaN(11-20)/zafiro). Tras el crecimiento ordenado, gran parte de los defectos presentes en los templates originales se ven reducidos, manifestándose en una gran mejora de las propiedades ópticas. En el caso de crecimiento selectivo sobre templates con orientación GaN(11-22), no polar, la formación de nanoestructuras con una particular morfología (baja relación entre crecimiento perpedicular frente a paralelo al plano) permite, a partir de la coalescencia de estas nanoestructuras, la fabricación de pseudo-templates no polares de GaN de alta calidad. ABSTRACT The aim of this work is to gain insight into the selective area growth of InGaN nanostructures by plasma assisted molecular beam epitaxy, focusing on their potential as building blocks for next generation LEDs. Several nanocolumn-based approaches such as standard axial InGaN/GaN structures, InGaN/GaN core-shell structures, or InGaN/GaN nanostructures grown on semi- and non-polar substrates are discussed. The first section reviews the basics of the self-assembled growth of GaN nanocolumns on Si(111). Morphology differences and optical properties are compared to those of GaN layer grown directly on Si(111). The effects of the growth temperature on the In incorporation in self-assembled InGaN nanocolumns grown on Si(111) is described. The second section reviews the basic growth mechanisms of selectively grown GaNbased nanostructures on c-plane GaN/sapphire templates. By increasing the local III/V ratio morphological changes from pyramidal islands, to GaN nanocolumns with top semi-polar planes, and further to GaN nanocolumns with top polar c-planes are observed. When growing InGaN nano-disks embedded into the GaN nanocolumns, the different morphologies mentioned lead to different optical properties, due to the semipolar and polar nature of the crystal planes involved. The third section reports on the effect of the growth temperature and In/Ga ratio on the morphology and light emission characteristics of ordered InGaN nanocolumns grown on c-plane GaN/sapphire templates. Within the growth temperature range of 650 to 750oC the In incorporation can be modified either by the growth temperature, or the In/Ga ratio. Control of these factors allows the optimization of the InGaN nanocolumns light emission wavelength. In order to achieve white light emission two approaches are used. First yellow-white light emission can be obtained at room temperature from nanostructures where the InGaN region is composition-graded by using temperature gradients during growth. In a second approach the stacking of red, green and blue emitting segments was used to achieve the monolithic integration of these structures in one single InGaN nanocolumn leading to ordered broad spectrum emitters. With this approach, the spectral shape can be controlled by changing the thickness of the respective InGaN segments. Furthermore the growth of ordered arrays of InGaN/GaN nanocolumnar light emitting diodes by molecular beam epitaxy, emitting in the blue (441 nm), green (502 nm), and yellow (568 nm) spectral range is reported. The device active region, consisting of a nanocolumnar InGaN section of nominally constant composition and 250 to 500 nm length, is free of extended defects, which is in strong contrast to InGaN layers (planar) of similar composition and thickness. Electroluminescence spectra show a very small blue shift with increasing current, (almost negligible in the yellow device) and line widths slightly broader than those of state-of-the-art InGaN quantum wells. Next the selective area growth of In(Ga)N/GaN nanocolumns on Si(111) substrates is discussed. Ordered In(Ga)N/GaN nanocolumns emitting from ultraviolet (3.2 eV) to infrared (0.78 eV) were then grown on top of GaN-buffered Si substrates. The morphology and the emission efficiency of the In(Ga)N/GaN nanocolumns emitting in the green could be substantially improved by tuning the In/Ga and total III/N ratios, where an estimated internal quantum efficiency of 30 % was derived from photoluminescence data. In the next section, this work presents a study on the selective area growth mechanisms of green-emitting InGaN/GaN nanocolumns and their optical properties. InGaN/GaN nanocolumns with long InGaN sections (330-830nm) were grown on GaN/sapphire and GaN-buffered Si(111). The nanocolumn’s morphology and spatial indium distribution is found to depend on the local group (III)/N and In/Ga ratios at the nanocolumn’s top. A negligible spread of the average indium incorporation among different nanostructures is found as indicated by similar shapes of the cathodoluminescence spectra taken from single nanocolumns and ensembles of nanocolumns. For InGaN/GaN nanocolumns grown on GaN-buffered Si(111), all emitting in the green spectral range, the internal quantum efficiency increases up to 30% when decreasing growth temperature and increasing active nitrogen. This behavior is likely due to the formation of highly localized states, as indicated by the absence of a complete s-shape behavior of the PL peak position with temperature (up to room temperature) in samples with high internal quantum efficiency. On the other hand, no dependence of the internal quantum efficiency on the growth conditions is found for InGaN/GaN nanostructures grown on GaN/sapphire, where the maximum achieved efficiency is 3.7%. As alternative to axial InGaN/GaN nanostructures, section 4 reports on the growth and characterization of InGaN/GaN core-shell structures on an ordered array of top-down patterned GaN microrods etched from a GaN/sapphire template. Growth of InGaN/GaN is conformal, with axial and radial growth components leading to core-shell structures with clear hexagonal facets. The radial InGaN growth (shell) is confirmed by spatially resolved cathodoluminescence performed in a scanning electron microscopy as well as in scanning transmission electron microscopy. Furthermore the growth of InGaN core-shell micro pillars using an ordered array of GaN cores grown by metal organic vapor phase epitaxy as a template is demonstrated. Upon InGaN overgrowth core-shell structures with emission at around 3.0 eV are formed. With spatially resolved cathodoluminescence, an increasing In content towards the pillar top is found to be present in the InGaN shell, as indicated by a shift of CL peak position from 3.2 eV at the shell bottom to 3.0 eV at the shell top. This shift is related to variations of the local III/V ratio at the side facets. Further, the successful fabrication of a core-shell pin diode structure is demonstrated. Spatially resolved electroluminescence measurements performed on individual micro LEDs, confirm emission from the InGaN shell (lateral diode) at around 3.0 eV, as well as from the pillar top facet (axial diode) at around 2.3 eV. Finally, this work reports on the selective area growth of GaN, with and without InGaN insertion, on semi-polar (11-22) and non-polar (11-20) templates. Upon SAG the high defect density present in the GaN templates is strongly reduced as indicated by TEM and a dramatic improvement of the optical properties. In case of SAG on non-polar (11-22) templates the formation of nanostructures with a low aspect ratio took place allowing for the fabrication of high-quality, non-polar GaN pseudo-templates by coalescence of the nanostructures.

Remote Effects of Hippocampal Sclerosis on Effective Connectivity during Working Memory Encoding: A Case of Connectional Diaschisis?

Accumulating evidence suggests a role for the medial temporal lobe (MTL) in working memory (WM). However, little is known concerning its functional interactions with other cortical regions in the distributed neural network subserving WM. To reveal these, we availed of subjects with MTL damage and characterized changes in effective connectivity while subjects engaged in WM task. Specifically, we compared dynamic causal models, extracted from magnetoencephalographic recordings during verbal WM encoding, in temporal lobe epilepsy patients (with left hippocampal sclerosis) and controls. Bayesian model comparison indicated that the best model (across subjects) evidenced bilateral, forward, and backward connections, coupling inferior temporal cortex (ITC), inferior frontal cortex (IFC), and MTL. MTL damage weakened backward connections from left MTL to left ITC, a decrease accompanied by strengthening of (bidirectional) connections between IFC and MTL in the contralesional hemisphere. These findings provide novel evidence concerning functional interactions between nodes of this fundamental cognitive network and sheds light on how these interactions are modified as a result of focal damage to MTL. The findings highlight that a reduced (top-down) influence of the MTL on ipsilateral language regions is accompanied by enhanced reciprocal coupling in the undamaged hemisphere providing a first demonstration of “connectional diaschisis.”

A study of set-sharing analysis via cliques

We study the problem of efñcient, scalable set-sharing analysis of logic programs. We use the idea of representing sharing information as a pair of abstract substitutions, one of which is a worst-case sharing representation called a clique set, which was previously proposed for the case of inferring pair-sharing. We use the clique-set representation for (1) inferring actual set-sharing information, and (2) analysis within a topdown framework. In particular, we define the abstract functions required by standard top-down analyses, both for sharing alone and also for the case of including freeness in addition to sharing. Our experimental evaluation supports the conclusión that, for inferring set-sharing, as it was the case for inferring pair-sharing, precisión losses are limited, while useful efñciency gains are obtained. At the limit, the clique-set representation allowed analyzing some programs that exceeded memory capacity using classical sharing representations.

An integration of partial evaluation in a generic abstract interpretation framework

Information generated by abstract interpreters has long been used to perform program specialization. Additionally, if the abstract interpreter generates a multivariant analysis, it is also possible to perform múltiple specialization. Information about valúes of variables is propagated by simulating program execution and performing fixpoint computations for recursive calis. In contrast, traditional partial evaluators (mainly) use unfolding for both propagating valúes of variables and transforming the program. It is known that abstract interpretation is a better technique for propagating success valúes than unfolding. However, the program transformations induced by unfolding may lead to important optimizations which are not directly achievable in the existing frameworks for múltiple specialization based on abstract interpretation. The aim of this work is to devise a specialization framework which integrates the better information propagation of abstract interpretation with the powerful program transformations performed by partial evaluation, and which can be implemented via small modifications to existing generic abstract interpreters. With this aim, we will relate top-down abstract interpretation with traditional concepts in partial evaluation and sketch how the sophisticated techniques developed for controlling partial evaluation can be adapted to the proposed specialization framework. We conclude that there can be both practical and conceptual advantages in the proposed integration of partial evaluation and abstract interpretation.