New inorganic nanotube polymer nanocomposites: Improved thermal, mechanical and tribological properties in isotactic polypropylene incorporating INT-MoS2.

Environmentally friendly molybdenum disulfide (INT-MoS2) inorganic nanotubes were introduced into an isotactic polypropylene (iPP) polymer matrix to generate novel nanocomposite materials through an advantageous melt-processing route. The effects of INT-MoS2 content on the thermal, mechanical and tribological properties were investigated. The incorporation of INT-MoS2 generates notable performance enhancements through reinforcement effects, highly efficient nucleation activity and excellent lubricating ability in comparison with other nanoparticle fillers such as nanoclays, carbon nanotubes, silicon nitrides and halloysite nanotubes. It was shown that these INT-MoS2 nanocomposites can provide an effective balance between performance, cost effectiveness and processability, and should be of some interest in the area of multifunctional polymer nanocomposite materials.

Tuning the properties of carbon fiber-reinforced poly (phenylene sulphide) laminates via incorporation of inorganic fullerene-like WS2 nanoparticles

Novel carbon fiber (CF)-reinforced poly(phenylene sulphide) (PPS) laminates incorporating inorganic fullerene-like tungsten disulfide (IF-WS2) nanoparticles were prepared via melt-blending and hot-press processing. The influence of the IF-WS2 on the morphology, thermal, mechanical and tribological properties of PPS/CF composites was investigated. Efficient nanoparticle dispersion within the matrix was attained without using surfactants. A progressive rise in thermal stability was found with increasing IF-WS2 loading, as revealed by thermogravimetric analysis. The addition of low nanoparticle contents retarded the crystallization of the matrix, whereas concentrations equal or higher than 1.0 wt% increased both the crystallization temperature and degree of crystallinity compared to those of PPS/CF. Mechanical tests indicated that with only 1.0 wt% IF-WS2 the flexural modulus and strength of PPS/CF improved by 17 and 14%, respectively, without loss in toughness, ascribed to a synergistic effect between the two fillers. A significant enhancement in the storage modulus and glass transition temperature was also observed. Moreover, the wear rate and coefficient of friction strongly decreased, attributed to the lubricant role of the IF-WS2 combined with their reinforcing effect. These inorganic nanoparticles show great potential to improve the mechanical and tribological properties of conventional thermoplastic/CF composites for structural applications.

Rheological and tribological properties of poly(phenylene sulphide) and poly(ether ether ketone) composites incorporating carbon nanotubes and inorganic nanoparticles: a comparative study

The rheological and tribological properties of single-walled carbon nanotube (SWCNT)-reinforced poly(phenylene sulphide) (PPS) and poly(ether ether ketone) (PEEK) nanocomposites prepared via melt-extrusion were investigated. The effectiveness of employing a dual-nanofiller strategy combining polyetherimide (PEI)-wrapped SWCNTs with inorganic fullerene-like tungsten disulfide (IF-WS2) nanoparticles for property enhancement of the resulting hybrid composites was evaluated. Viscoelastic measurements revealed that the complex viscosity ?, storage modulus G?, and loss modulus G? increased with SWCNT content. In the low-frequency region, G? and G? became almost independent of frequency at higher SWCNT loadings, suggesting a transition from liquid-like to solid-like behavior. The incorporation of increasing IF-WS2 contents led to a progressive drop in ? and G? due to a lubricant effect. PEEK nanocomposites showed lower percolation threshold than those based on PPS, ascribed to an improved SWCNT dispersion due to the higher affinity between PEI and PEEK. The SWCNTs significantly lowered the wear rate but only slightly reduced the coefficient of friction. Composites with both nanofillers exhibited improved wear behavior, attributed to the outstanding tribological properties of these nanoparticles and a synergistic reinforcement effect. The combination of SWCNTs with IF-WS2 is a promising route for improving the tribological and rheological performance of thermoplastic nanocomposites.

Ab-Initio calculations including Van der Waals interactions: the SnS2 layered material

Tin disulfide SnS2 was recently proposed as a high efficiency solar cell precursor [1]. The aim of this work is a deep study of the structural disposition of the most important polytipes of this layered material, not only describing the electronic correlation but also the interatomic Van der Waals interactions that is present between the layers. The two recent implementations to take Van der Waals interactions into account in the VASP code are the self-consistent Dion et al. [2] functional optimized for solids by Michaelides et al [3] and the Grimme [4] dispersion correction that is applied after each autoconsistent PBE electronic calculation. In this work these two methods are compared with DFT PBE functional. The results we will presented at this Conference, demonstrates the enhancement of the geometric parameters by the use of the Van der Waals interactions in agreement with the experimental values.

Polypropylene/glass fiber hierarchical composites incorporating inorganic fullerene-like nanoparticles for advanced technological applications

Novel isotactic polypropylene (iPP)/glass fiber (GF) laminates reinforced with inorganic fullerene-like tungsten disulfide (IF-WS2) nanoparticles as environmentally friendly fillers have been successfully fabricated by simple melt-blending and fiber impregnation in a hot-press without the addition of any compatibilizer. The influence of IF-WS2 concentration on the morphology, viscosity. and thermal and mechanical behavior of the hierarchical composites has been investigated. Results revealed an unprecedented 62 °C increase in the degradation temperature of iPP/GF upon addition of only 4.0 wt % IF-WS2. The coexistence of both micro- and nanoscale fillers resulted in synergistic effects on enhancing the stiffness, strength, crystallinity, thermal stability, glass transition (Tg) and heat distortion temperature (HDT) of the matrix. The approach used in this work is an efficient, versatile, scalable and economic strategy to improve the mechanical and thermal behavior of GF-reinforced thermoplastics with a view to extend their use in advanced technological applications. This new type of composite materials shows great potential to improve the efficiency and sustainability of many forms of transport.

Mechanical and thermal behaviour of isotactic polypropylene reinforced with inorganic fullerene-like WS2 nanoparticles: Effect of filler loading and temperature

The thermal and mechanical behaviour of isotactic polypropylene (iPP) nanocomposites reinforced with different loadings of inorganic fullerene-like tungsten disulfide (IF-WS2) nanoparticles was investigated. The IF-WS2 noticeably enhanced the polymer stiffness and strength, ascribed to their uniform dispersion, the formation of a large nanoparticle?matrix interface combined with a nucleating effect on iPP crystallization. Their reinforcement effect was more pronounced at high temperatures. However, a drop in ductility and toughness was found at higher IF-WS2 concentrations. The tensile behaviour of the nanocomposites was extremely sensitive to the strain rate and temperature, and their yield strength was properly described by the Eyring s equation. The activation energy increased while the activation volume decreased with increasing nanoparticle loading, indicating a reduction in polymer chain motion. The nanoparticles improved the thermomechanical properties of iPP: raised the glass transition and heat deflection temperatures while decreased the coefficient of thermal expansion. The nanocomposites also displayed superior flame retardancy with longer ignition time and reduced peak heat release rate. Further, a gradual rise in thermal conductivity was found with increasing IF-WS2 loading both in the glassy and rubbery states. The results presented herein highlight the benefits and high potential of using IF-nanoparticles for enhancing the thermomechanical properties of thermoplastic polymers compared to other nanoscale fillers.

Evaluating the reinforcement of inorganic fullerene-like nanoparticles in thermoplastic matrices by depth-sensing indentation

The reinforcing effect of inorganic fullerene-like tungsten disulfide (IF-WS2) nanoparticles in two different polymer matrices, isotactic polypropylene (iPP) and polyphenylene sulfide (PPS), has been investigated by means of dynamic depth-sensing indentation. The hardness and elastic modulus enhancement upon filler addition is analyzed in terms of two main contributions: changes in the polymer matrix nanostructure and intrinsic properties of the filler including matrix-particle load transfer. It is found that the latter mainly determines the overall mechanical improvement, whereas the nanostructural changes induced in the polymer matrix only contribute to a minor extent. Important differences are suggested between the mechanisms of deformation in the two nanocomposites, resulting in a moderate mechanical enhancement in case of iPP (20% for a filler loading of 1%), and a remarkable hardness increase in case of PPS (60% for the same filler content). The nature of the polymer amorphous phase, whether in the glassy or rubbery state, seems to play here an important role. Finally, nanoindentation and dynamic mechanical analysis measurements are compared and discussed in terms of the different directionality of the stresses applied.

Opportunities and challenges in the use of inorganic fullerene-like nanoparticles to produce advanced polymer nanocomposites

Polymer/inorganic nanoparticle nanocomposites have garnered considerable academic and industrial interest over recent decades in the development of advanced materials for a wide range of applications. In this respect, the dispersion of so-called inorganic fullerene-like (IF) nanoparticles, e.g., tungsten disulfide (IF-WS2) or molybdenum disulfide (IF-MoS2), into polymeric matrices is emerging as a new strategy. The surprising properties of these layered metal dichalcogenides such as high impact resistance and superior tribological behavior, attributed to their nanoscale size and hollow quasi-spherical shape, open up a wide variety of opportunities for applications of these inorganic compounds. The present work presents a detailed overview on research in the area of IF-based polymer nanocomposites, with special emphasis on the use of IF-WS2 nanoparticles as environmentally friendly reinforcing fillers. The incorporation of IF particles has been shown to be efficient for improving thermal, mechanical and tribological properties of various thermoplastic polymers, such as polypropylene, nylon-6, poly(phenylene sulfide), poly(ether ether ketone), where nanocomposites were fabricated by simple melt-processing routes without the need for modifiers or surfactants. This new family of nanocomposites exhibits similar or enhanced performance when compared with nanocomposites that incorporate carbon nanotubes, carbon nanofibers or nanoclays, but are substantially more cost-effective, efficient and environmentally satisfactory. Most recently, innovative approaches have been described that exploit synergistic effects to produce new materials with enhanced properties, including the combined use of micro- and nanoparticles such as IF-WS2/nucleating agent or IF-WS2/carbon fiber, as well as dual nanoparticle systems such as SWCNT/IF-WS2 where each nanoparticle has different characteristics. The structure–property relationships of these nanocomposites are discussed and potential applications proposed ranging from medicine to the aerospace, automotive and electronics industries.

Nematodes as indicators of the effect of soil fumigants on soil functioning

Debido al futuro incierto de la mayor parte de los fumigantes edáficos usados actualmente en la Unión Europea, que pueden implicar riesgos para la salud humana/animal y el medio ambiente, es necesario desarrollar programas de manejo integrado para el control de plagas de cultivos. Estos programas se incluyen como obligatorios en el Reglamento (EC) No. 1107/2009. De acuerdo con este Reglamento, es obligatoria la evaluación del riesgo asociado al uso de productos fitosanitarios sobre los organismos edáficos no diana y sus funciones, además de llevar a cabo ensayos con diferentes especies indicadoras para obtener datos de toxicidad que puedan ser usados posteriormente en la evaluación de riesgo. Sin embargo, la baja representatividad de algunas de estas especies indicadoras en el área Mediterránea supone una gran limitación. En esta situación, el Panel Científico de Productos Fitosanitarios y sus Residuos de la Autoridad Europea en Seguridad Alimentaria (EFSA), ha señalado la necesidad de modificar los datos ecotoxicológicos requeridos para evaluar los efectos adversos de los productos fitosanitarios de una manera más integrada, incluyendo criterios funcionales y estructurales mediante organismos como bacterias, hongos, protozoos y nematodos. De este modo, la EFSA ha recomendado el uso de los nematodos en la evaluación de la funcionalidad y estructura del suelo. Los nematodos están globalmente distribuidos y son morfológicamente diversos; esto junto con su gran abundancia y diversidad de respuestas a las perturbaciones edáficas, los convierte en indicadores adecuados del estado del suelo. Puesto que los nematodos interaccionan con muchos otros organismos que participan en diferentes eslabones de la red trófica edáfica, jugando papeles importantes en procesos edáficos esenciales en los agroescosistemas, la diversidad de nematodos es, a menudo, usada como indicador biológico de los efectos de las prácticas agrícolas en el estado del suelo. En los últimos años, diferentes índices basados en la comunidad nematológica han facilitado la interpretación de datos complejos sobre la ecología del suelo. Los índices de la red trófica edáfica, basados en la abundancia de grupos funcionales definidos como grupos C-P y grupos tróficos, permiten la evaluación de la funcionalidad de la red trófica edáfica. Por otra parte, la dificultad en la identificación taxonómica de nematodos para explicar su uso limitado como indicadores ecológicos, es ampliamente discutida, y existe cierta controversia en cuanto a la eficacia de los diferentes métodos de identificación de nematodos. Se argumenta que la identificación morfológica es difícil y puede llevar mucho tiempo debido a la falta de expertos especializados, y se afirma que las técnicas moleculares pueden resolver algunas limitaciones de las técnicas morfológicas como la identificación de juveniles. Sin embargo, los métodos de identificación molecular tienen también limitaciones; la mayoría de las bases de datos de secuencias de ADN están fuertemente orientadas hacia los nematodos fitoparásitos, los cuales representan sólo una parte de la comunidad edáfica de nematodos, mientras que hay poca información disponible de nematodos de vida libre a pesar de representar la mayoría de los nematodos edáficos. Este trabajo se centra en el estudio de los efectos de fumigantes edáficos en la funcionalidad del suelo a través del uso de diferentes indicadores basados en la comunidad de nematodos, como los índices de la red trófica, índices de diversidad, abundancia de los taxones más relevantes etc. También se han analizado otros indicadores funcionales relacionados con la supresividad edáfica, el ciclo de nutrientes o la actividad de la microfauna del suelo. En el capítulo 1, la diversidad de nematodos estudiada en una explotación comercial de fresa y sus alrededores durante dos campañas consecutivas en el suroeste español, fue baja en los suelos fumigados con fumigantes químicos ambas campañas y, aunque se observó una recuperación a lo largo de la campaña en la zona tratada, los suelos fumigados mostraron una condición perturbada permanente. La comunidad de nematodos estuvo más asociada al ciclo de nutrientes en la zona sin cultivar que en los suelos cultivados, y se observó poca relación entre la biomasa de las plantas y la estructura de la comunidad de nematodos. Los surcos sin tratar dentro de la zona de cultivo funcionaron como reservorio tanto de nematodos fitoparásitos como beneficiosos; sin embargo estas diferencias entre los surcos y los lomos de cultivo no fueron suficientes para mantener la supresividad edáfica en los surcos. Los suelos tratados fueron menos supresivos que los suelos sin tratar, y se observaron correlaciones positivas entre la supresividad edáfica y la estructura de la red trófica edáfica y la diversidad de nematodos. En el capítulo 2, se evaluaron los efectos de dos pesticidas orgánicos con efecto nematicida y dos nematicidas convencionales sobre las propiedades físico químicas del suelo, la diversidad de nematodos y la biomasa de las plantas en condiciones experimentales en dos tipos de suelo: suelos agrícolas poco diversos y suelos provenientes de una zona de vegetación natural muy diversos. El mayor efecto se observó en el tratamiento con neem, el cual indujo un gran incremento en el número de dauerlarvas en los suelos pobres en nutrientes, mientras que el mismo tratamiento indujo un incremento de poblaciones de nematodos bacterívoros, más estables y menos oportunistas, en los suelos del pinar ricos en materia orgánica. En el capítulo 3, se comparó la eficacia de métodos moleculares (TRFLP, Terminal Restriction Fragment Length Polymorphism) y morfológicos (microscopía de alta resolución) para la identificación de diferentes comunidades denematodos de España e Irlanda. Se compararon estadísticamente las diferencias y similitudes en la diversidad de nematodos, otros indicadores ecológicos y de la red trófica edáfica. Las identificaciones mediante el uso de TRFLP sólo detectó un porcentaje de los taxones presentes en las muestras de suelo identificadas morfológicamente, y los nematodos omnívoros y predadores no fueron detectados molecularmente en nuestro estudio. Los índices calculados en base a los nematodos micróboros mostraron más similitud cuando se identificaron morfológica y molecularmente que los índices basados en grupos tróficos más altos. Nuestros resultados muestran que, al menos con la técnica usada en este estudio, la identificación morfológica de nematodos es una herramienta fiable y más precisa que la identificación molecular, puesto que en general se obtiene una mayor resolución en la identificación de nematodos. En el capítulo 4, se estudiaron también los efectos de los nematicidas químicos sobre la comunidad de nematodos y la biomasa de las plantas en condiciones experimentales de campo, donde se aplicaron en una rotación de cultivo judía-col durante un ciclo de cultivo. Se aplicaron dos tipos de enmiendas orgánicas con el objetivo de mitigar el efecto negativo de los productos fitosanitarios sobre la diversidad edáfica. El efecto de los nematicidas sobre las propiedades del suelo y sobre la comunidad de nematodos fue más agudo que el efecto de las enmiendas. La incorporación de los restos de cosecha al final del ciclo de cultivo de la judía tuvo un gran efecto sobre la comunidad de nematodos, y aunque el número total de nematodos incrementó al final del experimento, se observó una condición perturbada permanente de la red trófica edáfica a lo largo del experimento. ABSTRACT Due to the uncertain future of the soil fumigants most commonly used in the EU, that might involve risks for human/animal health and the environment, there is a need to develop new integrated pest management programs, included as mandatory in the Regulation (EC) No. 1107/2009, to control crop diseases. According to this Regulation, evaluating the risk associated to the use of the plant production products (PPP) on non-target soil fauna and their function, and developing assays with different indicator species to obtain toxicity data to be used in the risk evaluation is mandatory. However, the low representativeness of some of these indicator species in the Mediterranean area is a relevant limitation. In this situation, the Scientific Panel of Plant Protection Products and their Residues of the European Food Safety Authority (EFSA) has pointed out the necessity of modifying the ecotoxicological data set required to evaluate non-target effects of PPP in a more integrated way, including structural and functional endpoints with organism such as bacteria, fungi, protists and nematodes. Thus, EFSA has recommended the use of nematodes in the assessment of the functional and structural features of the soil. Nematodes are globally distributed and morphologically diverse, and due to their high abundance and diversity of responses to soil disturbance, they are suitable indicators of the soil condition. Since nematodes interact with many other organisms as participants in several links of the soil food web, playing important roles in essential soil processes in agroecosystems, nematode diversity is often used as a biological indicator of the effects of agricultural practices on soil condition. In the last years, various indices based on soil nematode assemblages, have facilitated the interpretation of complex soil ecological data. Soil food web indices based on the abundances of functional guilds defined by C-P groups and trophic groups, permit evaluating soil food web functioning. On the other hand, the difficulty of nematode taxonomical identification is commonly argued to explain their limited used as ecological indicators, and there is a certain controversy in terms of the efficacy of various nematode identification methods. It is argued that the morphological identification is difficult and time consuming due to the lack of specialist knowledge, and it is claimed that molecular techniques can solve some limitations of morphological techniques such as the identification of juveniles. Nevertheless, molecular identification methods are limited too, since most of the DNA-based databases are strongly oriented towards plant-parasitic nematodes that represent only a fraction of the soil nematode community, while there is little information available on free-living nematodes, which represent most soil nematodes. This work focuses on the study of the effects of soil fumigants on soil functioning through the use of different indicators based on soil nematode community as soil food web indices, diversity indices, the abundance of more relevant taxa etc. Other functional indicators related to soil suppressiveness, nutrient cycling, or the activity of soil microfauna have been also studied. In chapter 1, nematode diversity assessed in a commercial strawberry farm and its surroundings for two consecutive growing seasons in southern Spain, was low in fumigated soils with chemical pesticides throughout both seasons and, although yearly recovery occurred within the treated fields, fumigated soils showed a permanent perturbed condition. The nematode community was more closely associated to nutrient cycling in the non-cropped than in the cropped soils, and the link between plant biomass and nematode community structure was weak. Non-treated furrows within the treated fields were a reservoir of both beneficial and plant-parasitic nematodes, but such difference between furrows and beds was not enough to maintain more suppressive soil assemblages in the furrows. Treated soils were less suppressive than unmanaged soils, and there was a positive and significant correlation between soil suppressiveness and soil food web structure and diversity. In chapter 2, the effects of two organic pesticides with nematicide effect and two chemical nematicides on soil physicalchemical properties, soil nematode diversity and plant biomass in experimental conditions were assessed in two types of soils: low diversity soils from an agricultural farm, and high diversity soils from a natural vegetation area. The larger effect was observed on the neem treatment, which induced a large boost of dauer juveniles in the nutrient-depleted soil, while the same treatment induced the increase of more stable, less opportunistic, populations of generalist bacterivore nematodes in the pine forest soil, rich in organic matter. In chapter 3, comparison of the efficiency of molecular (TRFLP, Terminal Restriction Fragment Length Polymorphism) and morphological (microscopy at high magnification) identification methods was carried out in different nematode communities from five sites of different land uses in Spain and Ireland. Differences and similarities on nematode diversity and other ecological and soil food web indices assessed by both methods, were statistically compared. Molecular identification with TRFLP only detected a percentage of the taxa present in the soil samples identified morphologically, and omnivores and predators were not detected molecularly in our study. Indices involving microbial feeding nematodes were more similar between identification methods than indices involving higher trophic links. Our results show that, at least with the technique used in this study, identifying nematodes morphologically is a reliable and more precise identification tool than molecular identification, since a higher taxonomic resolution is in general obtained compared to TRFLP. In chapter 4, the effect of chemical nematicides on nematode community descriptors and plant biomass was also studied in field conditions in an experimental area in which dazomet and dimethyl disulfide was applied in a bean-cabbage rotation system for a single season. Organic amendments were incorporated into the soil with the aim of mitigate the negative effect of the pesticides on soil diversity. The effect of the nematicides was much more noticeable than the effect of the amendments on soil properties and nematode community descriptors. The incorporation of bean crop residues into the soil at the end of bean crop cycle affected soil nematode community descriptors to a great extent, and although total number of nematodes increased at the end of the experiment, a permanent perturbed soil food web condition was observed along the experiment.

Hierarchical and hybrid polymer nanocomposites based on carbon nanotubes and inorganic fullerene type nanoparticles

The influence of singlewalled carbon nanotubes (SWCNT) and inorganic fullerenelike tungsten disulfide nanoparticles (IFWS2) on the morphology and thermal, mechanical and electrical performance of multifunctional fibrereinforced polymer composites has been investigated. Significant improvements were observed in stiffness, strength and toughness in poly (ether ether ketone) (PEEK) / (SWCNT) / glass fibre (GF) laminates when a compatibilizer was used for wrapping the CNTs. Hybrid poly(phenylene sulphide) (PPS)/IFWS2/ carbon fibre (CF) reinforced polymer composites showed improved mechanical and tribological properties attributed to a synergetic effect between the IF nanoparticles and CF.

Thermoplastic Polymer Nanocomposites Based on Inorganic Fullerene-like Nanoparticles and Inorganic Nanotubes

Using inorganic fullerene-like (IF) nanoparticles and inorganic nanotubes (INT) in organic-inorganic hybrid composite, materials provide the potential for improving thermal, mechanical, and tribological properties of conventional composites. The processing of such high-performance hybrid thermoplastic polymer nanocomposites is achieved via melt-blending without the aid of any modifier or compatibilizing agent. The incorporation of small quantities (0.1-4 wt.%) of IF/INTs (tungsten disulfide, IF-WS2 or molybdenum disulfide, MoS2) generates notable performance enhancements through reinforcement effects and excellent lubricating ability in comparison with promising carbon nanotubes or other inorganic nanoscale fillers. It was shown that these IF/INT nanocomposites can provide an effective balance between performance, cost effectiveness, and processability, which is of significant importance for extending the practical applications of diverse hierarchical thermoplastic-based composites.