Subjective comparison of consumer television technologies for 3D visualization

This paper presents a comparison among different consumer 3D display technologies by means of a subjective assessment test. Therefore, four 55-in displays have been considered: one autostereoscopic display, one stereoscopic with polarized passive glasses, and two with active shutter glasses. In addition, a high-quality 3D video database has been used to show diverse material with both views in high definition. To carry out the test, standard recommendations have been followed considering also some modifications looking for a test environment more similar to real home viewing conditions, with the objective of obtaining more representative conclusions. Moreover, several perceptual factors have been considered to study the performance of the displays, such as picture quality, depth perception, and visual discomfort. The obtained results show interesting issues, like the performance improvement of active shutter glasses technology, the high performance of the polarized glasses technology in terms of quality and comfort, and the need of improvement of the autostereoscopic displays to complement the visual comfort to reach a global high-quality visual experience.

Engineering analysis of ITER In-Vessel Viewing System guide tube

The In Vessel Viewing System (IVVS) will be one of the essential machine diagnostic systems at ITER to provide information about the status of in-vessel and plasma facing components and to evaluate the dust inside the Vacuum Vessel. The current design consists of six scanning probes and their deployment systems, which are placed in dedicated ports at the divertor level. These units are located in resident guiding tubes 10 m long, which allow the IVVS probes to go from their storage location to the scanning position by means of a simple straight translation. Moreover, each resident tube is supported inside the corresponding Vacuum Vessel and Cryostat port extensions, which are part of the primary confinement barrier. As the Vacuum Vessel and the Cryostat will move with respect to each other during operation (especially during baking) and during incidents and accidents (disruptions, vertical displacement events, seismic events), the structural integrity of the resident tube and the surrounding vacuum boundaries would be compromised if the required flexibility and supports are not appropriately assured. This paper focuses on the integration of the present design of the IVVS into the Vacuum Vessel and Cryostat environment. It presents the adopted strategy to withstand all the main interfacing loads without damaging the confinement barriers and the corresponding analysis supporting it.

Analysis of quality of experience in 3D video systems

Esta tesis presenta un estudio exhaustivo sobre la evaluación de la calidad de experiencia (QoE, del inglés Quality of Experience) percibida por los usuarios de sistemas de vídeo 3D, analizando el impacto de los efectos introducidos por todos los elementos de la cadena de procesamiento de vídeo 3D. Por lo tanto, se presentan varias pruebas de evaluación subjetiva específicamente diseñadas para evaluar los sistemas considerados, teniendo en cuenta todos los factores perceptuales relacionados con la experiencia visual tridimensional, tales como la percepción de profundidad y la molestia visual. Concretamente, se describe un test subjetivo basado en la evaluación de degradaciones típicas que pueden aparecer en el proceso de creación de contenidos de vídeo 3D, por ejemplo debidas a calibraciones incorrectas de las cámaras o a algoritmos de procesamiento de la señal de vídeo (p. ej., conversión de 2D a 3D). Además, se presenta el proceso de generación de una base de datos de vídeos estereoscópicos de alta calidad, disponible gratuitamente para la comunidad investigadora y que ha sido utilizada ampliamente en diferentes trabajos relacionados con vídeo 3D. Asimismo, se presenta otro estudio subjetivo, realizado entre varios laboratorios, con el que se analiza el impacto de degradaciones causadas por la codificación de vídeo, así como diversos formatos de representación de vídeo 3D. Igualmente, se describen tres pruebas subjetivas centradas en el estudio de posibles efectos causados por la transmisión de vídeo 3D a través de redes de televisión sobre IP (IPTV, del inglés Internet Protocol Television) y de sistemas de streaming adaptativo de vídeo. Para estos casos, se ha propuesto una innovadora metodología de evaluación subjetiva de calidad vídeo, denominada Content-Immersive Evaluation of Transmission Impairments (CIETI), diseñada específicamente para evaluar eventos de transmisión simulando condiciones realistas de visualización de vídeo en ámbitos domésticos, con el fin de obtener conclusiones más representativas sobre la experiencia visual de los usuarios finales. Finalmente, se exponen dos experimentos subjetivos comparando varias tecnologías actuales de televisores 3D disponibles en el mercado de consumo y evaluando factores perceptuales de sistemas Super Multiview Video (SMV), previstos a ser la tecnología futura de televisores 3D de consumo, gracias a una prometedora visualización de contenido 3D sin necesidad de gafas específicas. El trabajo presentado en esta tesis ha permitido entender los factores perceptuales y técnicos relacionados con el procesamiento y visualización de contenidos de vídeo 3D, que pueden ser de utilidad en el desarrollo de nuevas tecnologías y técnicas de evaluación de la QoE, tanto metodologías subjetivas como métricas objetivas. ABSTRACT This thesis presents a comprehensive study of the evaluation of the Quality of Experience (QoE) perceived by the users of 3D video systems, analyzing the impact of effects introduced by all the elements of the 3D video processing chain. Therefore, various subjective assessment tests are presented, particularly designed to evaluate the systems under consideration, and taking into account all the perceptual factors related to the 3D visual experience, such as depth perception and visual discomfort. In particular, a subjective test is presented, based on evaluating typical degradations that may appear during the content creation, for instance due to incorrect camera calibration or video processing algorithms (e.g., 2D to 3D conversion). Moreover, the process of generation of a high-quality dataset of 3D stereoscopic videos is described, which is freely available for the research community, and has been already widely used in different works related with 3D video. In addition, another inter-laboratory subjective study is presented analyzing the impact of coding impairments and representation formats of stereoscopic video. Also, three subjective tests are presented studying the effects of transmission events that take place in Internet Protocol Television (IPTV) networks and adaptive streaming scenarios for 3D video. For these cases, a novel subjective evaluation methodology, called Content-Immersive Evaluation of Transmission Impairments (CIETI), was proposed, which was especially designed to evaluate transmission events simulating realistic home-viewing conditions, to obtain more representative conclusions about the visual experience of the end users. Finally, two subjective experiments are exposed comparing various current 3D displays available in the consumer market, and evaluating perceptual factors of Super Multiview Video (SMV) systems, expected to be the future technology for consumer 3D displays thanks to a promising visualization of 3D content without specific glasses. The work presented in this thesis has allowed to understand perceptual and technical factors related to the processing and visualization of 3D video content, which may be useful in the development of new technologies and approaches for QoE evaluation, both subjective methodologies and objective metrics.

Entorno sin cinta para producción de televisión en alta definición

En este proyecto se propone un entorno de producción para televisión en alta definición donde las cintas magnéticas para la captura, modificación, gestión y transferencia de los contenidos audiovisuales, quedan sustituidas por servidores informáticos y sistemas de almacenamiento basados en las tecnologías de la información. Dicho entorno sin cintas tiene como misión la realización de la fase de la producción de los contenidos televisivos. Se trata de un centra independiente, en una ubicación remota respecto a las instalaciones centrales de la empresa emisora de televisión. La conexión del entorno sin cinta con los servicios centrales de la cadena se realiza por medio de redes de datos de alta velocidad y por enlace de radiofrecuencia. Por estos medios los sistemas de redacción comunican datos y escaletas, se reciben las señales de contribución que intervienen en los programas, se envía la serial realizada para emisión y se transfieren los materiales grabados al área de Postproducción para su elaboración final. Se plantean dos estudios de televisión dotados de servidores de video y de un almacenamiento compartido para una gestión ágil, unificada y flexible de las demandas de los programas. Además de la eliminación del lento y pesado trabajo de manipulación de las cintas, la producción resulta mucho mas ágil porque se eliminan tiempos de espera por la posibilidad de acceso simultaneo de varios usuarios a un mismo contenido. También se suprimen los tiempos de digitalización y descarga del material grabado, porque los sistemas implementados permiten la ingesta directa de las señales recibidas. Los contenidos de varias jornadas de grabación, en calidad HD, se conservan en el sistema de almacenamiento para la elaboración de materiales en el propio centra y para su transferencia al departamento central correspondiente. Mediante aplicaciones software se busca la integración del trabajo de la redacción de los programas con los procesos de producción de los estudios. El diseño que se propone para los diferentes subsistemas técnicos de los estudios esta orientado a lograr una alta fiabilidad, operatividad y adaptabilidad a las demandas técnicas de la producción audiovisual de los diferentes tipos de programas. Al tratarse de una propuesta conceptual, de manera general no se basa en equipos de marcas o fabricantes concretos sino mas bien en las metodologías concretas de trabajo. Cuando se ejemplifica algún dispositivo en particular es debido a que el concepto tecnológico del mismo es novedoso destaca de manera especial sobre la generalidad de los equipos existentes para esa funcionalidad. ABSTRACT. This project hopes to propose a television production platform that uses computers, servers and storage systems based on information technologies, rather than video tape recorders for ingesting, editing and making TV programs. This tapeless system has as its mission the production of all kind of television contents, employing IT systems, without the use of magnetic tapes. We envision an independent TV production center located in a remote location, in relation to the main broadcaster facilities, where all communications between this broadcasting center and the remote independent tapeless center would occur via high speed internet and a radiofrequency link as a back up. In this way, the Newsroom systems communicate data and rundowns; contribution feeds are received; PGM signal are codified and transmitted; and stored media are transferred to the post production area for final editing, playout and archive. Two TV studios are proposed, equipped with video servers and sharing media storage for agile, unified and flexible management of the production requirements. Apart from completely eliminating the slow and hard work resulting from handling a lot of traditional magnetic tapes, the production ends up being much quicker due to the fact that there is no waiting time between recording and viewing. This also enables several users to access and view the same material at the same time. The digitalization and downloading time is also greatly reduced due to the direct ingestion of contribution feeds to the system. The HD content of various days of recording, are stored for future use for whichever department needs the footage in the future. Through software applications, there will be complete integration between the Newsroom work and the production process of the studios. The proposed design for the various technical subsystems in the recording studio is directed towards achieving optimum reliability and operational capability: they are easily adaptable to the technical demands of the audiovisual production of the different programs. Because we are dealing with a conceptual proposal, in general terms, we are not defining the brands or manufacturers of the technical equipment, but rather we are specifying the methods which we plan to implement. When some equipment is highlighted, it's only because that specific brand exemplifies a higher performance than any other equipment in the range.