Adding semantic annotations into (Geospatial) RESTful services

In this paper the authors present an approach for the semantic annotation of RESTful services in the geospatial domain. Their approach automates some stages of the annotation process, by using a combination of resources and services: a cross-domain knowledge base like DBpedia, two domain ontologies like GeoNames and the WGS84 vocabulary, and suggestion and synonym services. The authors’ approach has been successfully evaluated with a set of geospatial RESTful services obtained from ProgrammableWeb.com, where geospatial services account for a third of the total amount of services available in this registry.

Computational Methods for Identification of Vibrating Structures

System identification deals with the problem of building mathematical models of dynamical systems based on observed data from the system" [1]. In the context of civil engineering, the system refers to a large scale structure such as a building, bridge, or an offshore structure, and identification mostly involves the determination of modal parameters (the natural frequencies, damping ratios, and mode shapes). This paper presents some modal identification results obtained using a state-of-the-art time domain system identification method (data-driven stochastic subspace algorithms [2]) applied to the output-only data measured in a steel arch bridge. First, a three dimensional finite element model was developed for the numerical analysis of the structure using ANSYS. Modal analysis was carried out and modal parameters were extracted in the frequency range of interest, 0-10 Hz. The results obtained from the finite element modal analysis were used to determine the location of the sensors. After that, ambient vibration tests were conducted during April 23-24, 2009. The response of the structure was measured using eight accelerometers. Two stations of three sensors were formed (triaxial stations). These sensors were held stationary for reference during the test. The two remaining sensors were placed at the different measurement points along the bridge deck, in which only vertical and transversal measurements were conducted (biaxial stations). Point estimate and interval estimate have been carried out in the state space model using these ambient vibration measurements. In the case of parametric models (like state space), the dynamic behaviour of a system is described using mathematical models. Then, mathematical relationships can be established between modal parameters and estimated point parameters (thus, it is common to use experimental modal analysis as a synonym for system identification). Stable modal parameters are found using a stabilization diagram. Furthermore, this paper proposes a method for assessing the precision of estimates of the parameters of state-space models (confidence interval). This approach employs the nonparametric bootstrap procedure [3] and is applied to subspace parameter estimation algorithm. Using bootstrap results, a plot similar to a stabilization diagram is developed. These graphics differentiate system modes from spurious noise modes for a given order system. Additionally, using the modal assurance criterion, the experimental modes obtained have been compared with those evaluated from a finite element analysis. A quite good agreement between numerical and experimental results is observed.

La transformación de la fachada en la arquitectura del siglo XX : evolución de los elementos arquitectónicos hacia el espacio

Esta tesis doctoral, bajo el título “La transformación de la fachada en la arquitectura del siglo XX. Evolución de los elementos arquitectónicos hacia el espacio único”, examina –siguiendo el método deductivo mediante investigación documental y de campo– los principales mecanismos proyectuales que han originado una transformación arquitectónica en la fachada. El término fachada, leído normalmente como sinónimo de arquitectura, ha sido analizado bajo taxonomías historiográficas, sociopolíticas, formales, compositivas o materiales. Más allá de estas clasificaciones, esta investigación determina cómo han evolucionado los elementos arquitectónicos hacia el espacio único, transformando con ello tanto la realidad física como el concepto de fachada. Proyectar, como diría Robert Venturi1. 1966, tanto desde el exterior al interior como desde el interior al exterior, produce las tensiones necesarias que ayudan a generar la arquitectura. De ahí la importancia del estudio de la transformación de la fachada como faccia, máscara, disfraz o sistema de representación, a la fachada como un diafragma activo, como un espacio de relación o como un límite donde se produce una experiencia arquitectónica con nuevos significados. El término fachada, del latín facies y del italiano facciata, fue creado como tal durante el siglo XVI, aunque como elemento arquitectónico es una realidad clásica y un concepto humanista reinventado en el Renacimiento. A principios del siglo XX la fachada se transforma radicalmente, con la aparición del vidrio plano de grandes dimensiones, y se despoja de su carga historicista. La transparencia literal hace desaparecer (negar) la fachada. La fachada se construye con nuevos materiales, nuevas tecnologías, y responde a un espacio global que espera a ser colonizado por una sociedad en constante mutación; un espacio que irá siendo cada vez más complejo a lo largo del siglo pasado y que tendrá como una de sus principales consecuencias un mayor grado de abstracción en la fachada. Para desarrollar con mayor precisión las intenciones de este trabajo se analiza la acepción de fachada en la que se encuadra la línea de investigación de la tesis doctoral. Siguiendo las indicaciones del Profesor Kenneth Frampton, se ha optado por dedicar precisamente a este análisis el primer capítulo, de precedentes, con el fin de hacer una relectura de la fachada barroca en clave contemporánea. La fachada barroca se estudia como un punto de inflexión, y origen de la transformación, frente al clasicismo de siglos precedentes. Se plantea por tanto como el primero de los mecanismos proyectuales motivo de estudio. Estos mecanismos han sido sometidos a una clasificación que responde a diversos tipos de espacio arquitectónico que han provocado la transformación de la fachada, analizando cada uno de ellos con un filtro bajo el cual se ha desarrollado un estudio pormenorizado. De esta manera se examinan la transformación compositiva de la fachada por medio del espacio dinámico (capítulo 00_precedentes) en San Carlo alle Quattro Fontane de Francesco Borromini, la transformación constructiva de la fachada por medio del espacio membrana (capítulo 01) en la Villa Tugendhat de Mies van der Rohe, la transformación diagramática de la fachada por medio del espacio pliegue (capítulo 02) en la terminal portuaria de Yokohama de FOA, la transformación tecnológica de la fachada por medio del espacio estructura (capítulo 03) en la mediateca de Sendai de Toyo Ito y, finalmente, la transformación fenomenológica de la fachada por medio del espacio múltiple (capítulo 04) en el pabellón de vidrio del Museo Toledo de SANAA. La investigación se completa con el análisis de una serie de textos que acompañan a cada uno de los capítulos, generando así un cuerpo de conocimiento global junto al análisis documental y las visitas de campo de cada uno de los casos de estudio considerados. ABSTRACT This doctoral thesis entitled “The Transformation of the Façade in Twentieth Century Architecture. The Evolution of Architectural Elements Towards a Single Space“ employs a deductive methodology incorporating both archival and field research, to examine the main design strategies that have given rise to the architectural transformation of the façade. The term façade, usually read as a synonym for architecture, has been analyzed under historiographic, sociopolitical, formal, compositive and material taxonomies. Far beyond these classifications, this study determines how architectural elements have evolved towards a single space, consequently transforming both the physical reality and the concept of façade. As Robert Venturi would say,1 to design from the inside-out and from the outside-in can create valid tensions that help generate architecture, hence the importance of this study of the transformation of the façade as a faccia, a mask, disguise or representation system, to the façade as an active diaphragm, a connective space or a limit within which architectural events with new meaning take place. The term fachada (Spanish for façade), from the Latin facies and the Italian facciata, appeared as such during the sixteenth century, although as an architectural element it is a classical ingredient and a humanist concept reinvented during the Renaissance. At the beginning of the 20th century, the façade is radically transformed with the introduction of large format plate glass, stripping it of its historicist content. Literal transparency causes the façade to disappear. The façade is built with new materials, new technologies, responding to a global space to be occupied by an everchanging society. It is a space that becomes increasingly more complex throughout the last century and which will have, as a consequence, a larger degree of abstraction in the façade. In order to more precisely focus this investigation, the meaning of the façade has been scrutinized. Following Professor Kenneth Frampton’s advice, the first chapter -Precedents- is precisely dedicated to this analysis, in order to understand the baroque façade read in a contemporary manner. The baroque façade has been studied as a turning point, the origin of the transformation of the façade, as compared to the classicism of previous centuries. For this reason it is considered the first design strategy to be studied. These strategeies have been sorted into a classification of architectural spaces that have caused the transformation of the façade, all of which having been analyzed using a methodology allowing for detailed study. Thus, this investigation examines the compositional transformation of the façade by means of a dynamic space (chapter 00: Precedents) in San Carlo alle Quattro Fontane by Francesco Borromini, the constructive transformation of the façade by means of a membrane space (chapter 01) in the Tugendhat Villa by Mies van der Rohe, the diagrammatic transformation of the façade by means of a folded space (chapter 02) in the Yokohama International Port Terminal by FOA, the technological transformation of the façade by means of a structure space (chapter 03) in the Sendai Mediathèque by Toyo Ito, and finally, the technological transformation of the façade by means of multiple space (chapter 04) in the Glass Pavilion of the Toledo Museum of Art by SANAA. The research is supplemented by the analysis of a series of texts presented alongside each chapter; creating a global body of knowledge together alongside the documentary analysis and on site analysis of each of the case studies considered.