Transcriptional changes and oxidative stress associated with the synergistic interaction between potato virus X and potato virus Y and their relationship with symptom expression.

Many virus diseases of economic importance to agriculture result from mixtures of different pathogens invading the host at a given time. This contrasts with the relatively scarce studies available on the molecular events associated with virus---host interactions in mixed infections. Compared with single infections, co-infection of Nicotiana benthamiana with Potato virus X (PVX) and Potato virus Y (PVY) resulted in increased systemic symptoms (synergism) that led to necrosis of the newly emerging leaves and death of the plant. A comparative transcriptional analysis was undertaken to identify quantitative and qualitative differences in gene expression during this synergistic infection and correlate these changes with the severe symptoms it caused. Global transcription profiles of doubly infected leaves were compared with those from singly infected leaves using gene ontology enrichment analysis and metabolic pathway annotator software. Functional gene categories altered by the double infection comprise suites of genes regulated coordinately, which are associated with chloroplast functions (downregulated), protein synthesis and degradation (upregulated), carbohydrate metabolism (upregulated), and response to biotic stimulus and stress (upregulated). The expressions of reactive oxygen species?generating enzymes as well as several mitogen-activated protein kinases were also significantly induced. Accordingly, synergistic infection induced a severe oxidative stress in N. benthamiana leaves, as judged by increases in lipid peroxidation and by the generation of superoxide radicals in chloroplasts, which correlated with the misregulation of antioxidative genes in microarray data. Interestingly, expression of genes encoding oxylipin biosynthesis was uniquely upregulated by the synergistic infection. Virus-induced gene silencing of ?-dioxygenase1 delayed cell death during PVX?PVY infection.

Towards a Transfer Model of Scientific and Technological Knowledge: the Case of Mexico

This paper shows the development of a science-technological knowledge transfer model in Mexico, as a means to boost the limited relations between the scientific and industrial environments. The proposal is based on the analysis of eight organizations (research centers and firms) with varying degrees of skill in the practice of science-technological knowledge transfer, and carried out by the case study approach. The analysis highlights the synergistic use of the organizational and technological capabilities of each organization, as a means to identification of the knowledge transfer mechanisms best suited to enabling the establishment of cooperative processes, and achieve the R&D and innovation activities results.

Tuning the properties of carbon fiber-reinforced poly (phenylene sulphide) laminates via incorporation of inorganic fullerene-like WS2 nanoparticles

Novel carbon fiber (CF)-reinforced poly(phenylene sulphide) (PPS) laminates incorporating inorganic fullerene-like tungsten disulfide (IF-WS2) nanoparticles were prepared via melt-blending and hot-press processing. The influence of the IF-WS2 on the morphology, thermal, mechanical and tribological properties of PPS/CF composites was investigated. Efficient nanoparticle dispersion within the matrix was attained without using surfactants. A progressive rise in thermal stability was found with increasing IF-WS2 loading, as revealed by thermogravimetric analysis. The addition of low nanoparticle contents retarded the crystallization of the matrix, whereas concentrations equal or higher than 1.0 wt% increased both the crystallization temperature and degree of crystallinity compared to those of PPS/CF. Mechanical tests indicated that with only 1.0 wt% IF-WS2 the flexural modulus and strength of PPS/CF improved by 17 and 14%, respectively, without loss in toughness, ascribed to a synergistic effect between the two fillers. A significant enhancement in the storage modulus and glass transition temperature was also observed. Moreover, the wear rate and coefficient of friction strongly decreased, attributed to the lubricant role of the IF-WS2 combined with their reinforcing effect. These inorganic nanoparticles show great potential to improve the mechanical and tribological properties of conventional thermoplastic/CF composites for structural applications.

Rheological and tribological properties of poly(phenylene sulphide) and poly(ether ether ketone) composites incorporating carbon nanotubes and inorganic nanoparticles: a comparative study

The rheological and tribological properties of single-walled carbon nanotube (SWCNT)-reinforced poly(phenylene sulphide) (PPS) and poly(ether ether ketone) (PEEK) nanocomposites prepared via melt-extrusion were investigated. The effectiveness of employing a dual-nanofiller strategy combining polyetherimide (PEI)-wrapped SWCNTs with inorganic fullerene-like tungsten disulfide (IF-WS2) nanoparticles for property enhancement of the resulting hybrid composites was evaluated. Viscoelastic measurements revealed that the complex viscosity ?, storage modulus G?, and loss modulus G? increased with SWCNT content. In the low-frequency region, G? and G? became almost independent of frequency at higher SWCNT loadings, suggesting a transition from liquid-like to solid-like behavior. The incorporation of increasing IF-WS2 contents led to a progressive drop in ? and G? due to a lubricant effect. PEEK nanocomposites showed lower percolation threshold than those based on PPS, ascribed to an improved SWCNT dispersion due to the higher affinity between PEI and PEEK. The SWCNTs significantly lowered the wear rate but only slightly reduced the coefficient of friction. Composites with both nanofillers exhibited improved wear behavior, attributed to the outstanding tribological properties of these nanoparticles and a synergistic reinforcement effect. The combination of SWCNTs with IF-WS2 is a promising route for improving the tribological and rheological performance of thermoplastic nanocomposites.

Viabilidad técnica para la explotación y separación isotópica de Li y prospectiva en el mercado de baterías de ION-7Li y de 6Li como material base de diseño en reactores de fusión nuclear

En claro alineamiento con estrategias de sostenibilidad en el uso de recursos naturales en un escenario constante de aumento de la demanda energética mundial, el desarrollo de la tecnología energética en la Historia de la Especie Humana muestra un vector de evolución permanente desde su origen en el sentido del desarrollo y uso de nuevas fuentes energéticas con la explotación de recursos naturales de manera más eficiente: soluciones energéticas con aumento de la densidad energética (exoenergía de proceso por unidad de masa de recurso natural). Así el cambio de escala en la demanda de explotación del Litio como recurso natural se viene presentando en la última década ligada al desarrollo del mercado de las baterías "ion-Litio" y los requisitos de combustible (Deuterio y Litio) en el camino de la fusión nuclear como opción energética próxima. El análisis anticipado de las demandas sinérgicas a escala de ambos mercados aparece de enorme interés prospectivo en sus aspectos técnicos: (1) tecnologías de base para la extracción mineral y de agua marina y (2) su enriquecimiento isotópico (de interés sinérgico; 7Li para baterías eficientes ion-litio; 6Li como regenerador de tritio en ciclo de combustible en fusión nuclear) a la vez que en sus aspectos económicos. Este Proyecto realiza: (1) un ejercicio de análisis prospectivo de la demanda y de mercado para el enriquecimiento 6Li/7Li para las próximas décadas, (2) se califican los desarrollos tecnológicos específicos que van a poder permitir la producción a escala conforme a la demanda; (3) se selecciona y califica una técnica [de centrifugación / termo-difusión/ destilación combinada] como opción tecnológicamente viable para la producción a escala de formas litiadas; (4) se propone un diseño conceptual de planta de producción y finalmente (5) propone un estudio de viabilidad para la demostración de proceso y construcción de dicha planta de demostración de la nueva capacidad tecnológica. ABSTRACT Clearly aligned with sustainability strategies under growing world energy demand in the use of natural resources the development of energy technology in the history of the human species shows a vector of ongoing evolution from its origin in the sense of the development and use of new energy sources with the exploitation of natural resources in a more efficient manner. The change of scale in the demand for exploitation of Lithium as a natural resource appears during the last decade as bound to the deployment of "lithium-ion" batteries market and to the Nuclear Fusion fuels (deuterium and lithium) supply scaled demands. The prospective analysis of demands to scale in both markets appears in scene with huge prospective interest in its technical aspects: (1) base technologies for mineral and water marine extraction (2) its isotopic enrichment (synergistic interests; 7Li efficient battery Li-ion; 6Li as fusion nuclear fuel breeder (tritium) as well as in its economic aspects. This Project: (1) propose a prospective analysis exercise of the synergistic supply demand for coming decades for the enrichment of 6Li and 7Li, (2) qualifies specific technological developments ongoing to respond to supply demand; (3) select and qualifies an appropriate technique [combined centrifugation/thermo-diffusion/distillation] as technologically viable option for lithiated forms scaled-production; (4) proposes a conceptual design of production plant based on the technique and finally (5) proposes a feasibility study for the process demonstration and construction of this new technological capability Demonstration Plant.

Mechanical behavior of tungsten-vanadium-lanthana alloys as function of temperature

The mechanical behavior of three tungsten (W) alloys with vanadium (V) and lanthana (La2O3) additions (W–4%V, W–1%La2O3, W–4%V–1%La2O3) processed by hot isostatic pressing (HIP) have been compared with pure-W to analyze the influence of the dopants. Mechanical characterization was performed by three point bending (TPB) tests in an oxidizing air atmosphere and temperature range between 77 (immersion tests in liquid nitrogen) and 1273 K, through which the fracture toughness, flexural strength, and yield strength as function of temperature were obtained. Results show that the V and La2O3 additions improve the mechanical properties and oxidation behavior, respectively. Furthermore, a synergistic effect of both dopants results in an extraordinary increase of the flexure strength, fracture toughness and resistance to oxidation compared to pure-W, especially at higher temperatures. In addition, a new experimental method was developed to obtain a very small notch tip radius (around 5–7 μm) and much more similar to a crack through the use of a new machined notch. The fracture toughness results were lower than those obtained with traditional machining of the notch, which can be explained with electron microscopy, observations of deformation in the rear part of the notch tip. Finally, scanning electron microscopy (SEM) examination of the microstructure and fracture surfaces was used to determine and analyze the relationship between the macroscopic mechanical properties and the micromechanisms of failure involved, depending on the temperature and the dispersion of the alloy.

Polypropylene/glass fiber hierarchical composites incorporating inorganic fullerene-like nanoparticles for advanced technological applications

Novel isotactic polypropylene (iPP)/glass fiber (GF) laminates reinforced with inorganic fullerene-like tungsten disulfide (IF-WS2) nanoparticles as environmentally friendly fillers have been successfully fabricated by simple melt-blending and fiber impregnation in a hot-press without the addition of any compatibilizer. The influence of IF-WS2 concentration on the morphology, viscosity. and thermal and mechanical behavior of the hierarchical composites has been investigated. Results revealed an unprecedented 62 °C increase in the degradation temperature of iPP/GF upon addition of only 4.0 wt % IF-WS2. The coexistence of both micro- and nanoscale fillers resulted in synergistic effects on enhancing the stiffness, strength, crystallinity, thermal stability, glass transition (Tg) and heat distortion temperature (HDT) of the matrix. The approach used in this work is an efficient, versatile, scalable and economic strategy to improve the mechanical and thermal behavior of GF-reinforced thermoplastics with a view to extend their use in advanced technological applications. This new type of composite materials shows great potential to improve the efficiency and sustainability of many forms of transport.

Inorganic Nanoparticle-Modified Poly(Phenylene Sulphide)/ Carbon Fiber Laminates: Thermomechanical Behaviour

Carbon fiber (CF)-reinforced high-temperature thermoplastics such as poly(phenylene sulphide) (PPS) are widely used in structural composites for aerospace and automotive applications. The porosity of CF-reinforced polymers is a very important topic for practical applications since there is a direct correlation between void content and mechanical properties. In this study, inorganic fullerene-like tungsten disulphide (IF-WS2) lubricant nanoparticles were used to manufacture PPS/IF-WS2/CF laminates via melt-blending and hot-press processing, and the effect of IF-WS2 loading on the quality, thermal and mechanical behaviour of the hybrid composites was investigated. The addition of IF-WS2 improved fiber impregnation, resulting in lower degree of porosity and increased delamination resistance, compression and flexural properties; their reinforcement effect was greater at temperatures above the glass transition (Tg). IF-WS2 contents higher than 0.5 wt % increased Tg and the heat deflection temperature while reduced the coefficient of thermal expansion. The multiscale laminates exhibited higher ignition point and notably reduced peak heat release rate compared to PPS/CF. The coexistence of micro- and nano-scale fillers resulted in synergistic effects that enhanced the stiffness, strength, thermal conductivity and flame retardancy of the matrix. The results presented herein demonstrate that the IF-WS2 are very promising nanofillers to improve the thermomechanical properties of conventional thermoplastic/CF composites.

Opportunities and challenges in the use of inorganic fullerene-like nanoparticles to produce advanced polymer nanocomposites

Polymer/inorganic nanoparticle nanocomposites have garnered considerable academic and industrial interest over recent decades in the development of advanced materials for a wide range of applications. In this respect, the dispersion of so-called inorganic fullerene-like (IF) nanoparticles, e.g., tungsten disulfide (IF-WS2) or molybdenum disulfide (IF-MoS2), into polymeric matrices is emerging as a new strategy. The surprising properties of these layered metal dichalcogenides such as high impact resistance and superior tribological behavior, attributed to their nanoscale size and hollow quasi-spherical shape, open up a wide variety of opportunities for applications of these inorganic compounds. The present work presents a detailed overview on research in the area of IF-based polymer nanocomposites, with special emphasis on the use of IF-WS2 nanoparticles as environmentally friendly reinforcing fillers. The incorporation of IF particles has been shown to be efficient for improving thermal, mechanical and tribological properties of various thermoplastic polymers, such as polypropylene, nylon-6, poly(phenylene sulfide), poly(ether ether ketone), where nanocomposites were fabricated by simple melt-processing routes without the need for modifiers or surfactants. This new family of nanocomposites exhibits similar or enhanced performance when compared with nanocomposites that incorporate carbon nanotubes, carbon nanofibers or nanoclays, but are substantially more cost-effective, efficient and environmentally satisfactory. Most recently, innovative approaches have been described that exploit synergistic effects to produce new materials with enhanced properties, including the combined use of micro- and nanoparticles such as IF-WS2/nucleating agent or IF-WS2/carbon fiber, as well as dual nanoparticle systems such as SWCNT/IF-WS2 where each nanoparticle has different characteristics. The structure–property relationships of these nanocomposites are discussed and potential applications proposed ranging from medicine to the aerospace, automotive and electronics industries.

Caracterización de la necrosis sistémica inducida por la interacción sinérgica entre el Virus X de la patata y potyvirus en Nicotiana benthamiana

Los virus de plantas pueden causar enfermedades severas que conllevan serias pérdidas económicas a nivel mundial. Además, en la naturaleza son comunes las infecciones simultáneas con distintos virus que conducen a la exacerbación de los síntomas de enfermedad, fenómeno al que se conoce como sinergismo viral. Una de las sintomatologías más severas causadas por los virus en plantas susceptibles es la necrosis sistémica (NS), que incluso puede conducir a la muerte del huésped. Este fenotipo ha sido comparado en ocasiones con la respuesta de resistencia de tipo HR, permitiendo establecer una serie de paralelismos entre ambos tipos de respuesta que sugieren que la NS producida en interacciones compatibles sería el resultado de una respuesta hipersensible sistémica (SHR). Sin embargo, los mecanismos moleculares implicados en el desarrollo de la NS, su relación con procesos de defensa antiviral o su relevancia biológica aún no son bien entendidos, al igual que tampoco han sido estudiados los cambios producidos en la planta a escala genómica en infecciones múltiples que muestran sinergismo en patología. En esta tesis doctoral se han empleado distintas aproximaciones de análisis de expresión génica, junto con otras técnicas genéticas y bioquímicas, en el sistema modelo de Nicotiana benthamiana para estudiar la NS producida por la infección sinérgica entre el Virus X de la patata (PVX) y diversos potyvirus. Se han comparado los cambios producidos en el huésped a nivel genómico y fisiológico entre la infección doble con PVX y el Virus Y de la patata (PVY), y las infecciones simples con PVX o PVY. Además, los cambios transcriptómicos y hormonales asociados a la infección con la quimera viral PVX/HC‐Pro, que reproduce los síntomas del sinergismo entre PVX‐potyvirus, se han comparado con aquellos producidos por otros dos tipos de muerte celular, la PCD ligada a una interacción incompatible y la PCD producida por la disfunción del proteasoma. Por último, técnicas de genética reversa han permitido conocer la implicación de factores del huésped, como las oxilipinas, en el desarrollo de la NS asociada al sinergismo entre PVXpotyvirus. Los resultados revelan que, respecto a las infecciones con solo uno de los virus, la infección doble con PVX‐PVY produce en el huésped diferencias cualitativas además de cuantitativas en el perfil transcriptómico relacionado con el metabolismo primario. Otros cambios en la expresión génica, que reflejan la activación de mecanismos de defensa, correlacionan con un fuerte estrés oxidativo en las plantas doblemente infectadas que no se detecta en las infecciones simples. Además, medidas en la acumulación de determinados miRNAs implicados en diversos procesos celulares muestran como la infección doble altera de manera diferencial tanto la acumulación de estos miRNAs como su funcionalidad, lo cual podría estar relacionado con los cambios en el transcriptoma, así como con la sintomatología de la infección. La comparación a nivel transcriptómico y hormonal entre la NS producida por PVX/HC‐Pro y la interacción incompatible del Virus del mosaico del tabaco en plantas que expresan el gen N de resistencia (SHR), muestra que la respuesta en la interacción compatible es similar a la que se produce durante la SHR, si bien se presenta de manera retardada en el tiempo. Sin embargo, los perfiles de expresión de genes de defensa y de respuesta a hormonas, así como la acumulación relativa de ácido salicílico (SA), ácido jasmonico (JA) y ácido abscísico, en la interacción compatible son más semejantes a la respuesta PCD producida por la disfunción del proteasoma que a la interacción incompatible. Estos datos sugieren una contribución de la interferencia sobre la funcionalidad del proteasoma en el incremento de la patogenicidad, observado en el sinergismo PVX‐potyvirus. Por último, los resultados obtenidos al disminuir la expresión de 9‐LOX, α‐DOX1 y COI1, relacionados con la síntesis o con la señalización de oxilipinas, y mediante la aplicación exógena de JA y SA, muestran la implicación del metabolismo de las oxilipinas en el desarrollo de la NS producida por la infección sinérgica entre PVXpotyvirus en N. benthamiana. Además, estos resultados indican que la PCD asociada a esta infección, al igual que ocurre en interacciones incompatibles, no contiene necesariamente la acumulación viral, lo cual indica que necrosis e inhibición de la multiplicación viral son procesos independientes. ABSTRACT Plant viruses cause severe diseases that lead to serious economic losses worldwide. Moreover, simultaneous infections with several viruses are common in nature leading to exacerbation of the disease symptoms. This phenomenon is known as viral synergism. Systemic necrosis (SN) is one of the most severe symptoms caused by plant viruses in susceptible plants, even leading to death of the host. This phenotype has been compared with the hypersensitive response (HR) displayed by resistant plants, and some parallelisms have been found between both responses, which suggest that SN induced by compatible interactions could be the result of a systemic hypersensitive response (SHR). However, the molecular mechanisms involved in the development of SN, its relationship with antiviral defence processes and its biological relevance are still unknown. Furthermore, the changes produced in plants by mixed infections that cause synergistic pathological effects have not been studied in a genome‐wide scale. In this doctoral thesis different approaches have been used to analyse gene expression, together with other genetic and biochemical techniques, in the model plant Nicotiana benthamiana, in order to study the SN produced by the synergistic infection of Potato virus X (PVX) with several potyviruses. Genomic and physiological changes produced in the host by double infection with PVX and Potato virus Y (PVY), and by single infection with PVX or PVY have been compared. In addition, transcriptional and hormonal changes associated with infection by the chimeric virus PVX/HC‐Pro, which produces synergistic symptoms similar to those caused by PVX‐potyvirus, have been compared with those produced by other types of cell death. These types of cell death are: PCD associated with an incompatible interaction, and PCD produced by proteasome disruption. Finally, reverse genetic techniques have revealed the involvement of host factors, such as oxylipins, in the development of SN associated with PVX‐potyvirus synergism. The results revealed that compared with single infections, double infection with PVX‐PVY produced qualitative and quantitative differences in the transcriptome profile, mainly related to primary metabolism. Other changes in gene expression, which reflected the activation of defence mechanisms, correlated with a severe oxidative stress in doubly infected plants that was undetected in single infections. Additionally, accumulation levels of several miRNAs involved in different cellular processes were measured, and the results showed that double infection not only produced the greatest variations in miRNA accumulation levels but also in miRNA functionality. These variations could be related with transcriptomic changes and the symptomatology of the infection. Transcriptome and hormone level comparisons between SN induced by PVX/HCPro and the incompatible interaction produced by Tobacco mosaic virus in plants expressing the N resistance gene (SHR), showed some similarities between both responses, even though the compatible interaction appeared retarded in time. Nevertheless, the expression profiles of both defence‐related genes and hormoneresponsive genes, as well as the relative accumulation of salicylic acid (SA), jasmonic acid (JA) and abscisic acid in the compatible interaction are more similar to the PCD response produced by proteasome disruption. These data suggest that interference with proteasome functionality contributes to the increase in pathogenicity associated with PVX‐potyvirus synergism. Finally, the results obtained by reducing the expression of 9‐LOX, α‐DOX1 and COI1, related with synthesis or signalling of oxylipins, and by applying exogenously JA and SA, revealed that oxylipin metabolism is involved in the development of SN induced by PVX‐potyvirus synergistic infections in N. benthamiana. Moreover, these results also indicated that PVX‐potyvirus associated PCD does not necessarily restrict viral accumulation, as is also the case in incompatible interactions. This indicates that both necrosis and inhibition of viral multiplication are independent processes.

Modelo de gestión de la responsabilidad social para las empresas del sector petrolero venezolano

El presente trabajo tiene como objetivo diseñar un modelo de gestión de responsabilidad social sustentado en estándares internacionales para las empresas del sector petrolero venezolano. Esta investigación no se suscribe a un modelo epistémico en particular, como forma parcializada de ver la realidad. Por el contrario, se realizó un abordaje holístico de la investigación, entendiendo el evento de estudio, la gestión de la responsabilidad social, como un evento integrado por distintas visiones de la relación empresa – sociedad. La holística se refiere a una tendencia que permite entender la realidad desde el punto de vista de las múltiples interacciones que la caracterizan. Corresponde a una actitud integradora como también a una teoría explicativa que se orienta hacia una comprensión contextual de los procesos, de los protagonistas y de los eventos. Desde la concepción holística se determinó que la investigación es de tipo proyectiva. Este tipo de investigación propone soluciones a una situación determinada a partir de un proceso de indagación. Implica describir, comparar, explicar y proponer alternativas de cambios, lo que da lugar a los estadios de investigación. En cuanto al diseño de la investigación, aplicando el ciclo holístico, se tiene un diseño que es univariable, transeccional contemporáneo y de fuente mixta. Univariable, porque se enfoca en la gestión de responsabilidad social. Transeccional contemporáneo, porque el evento se estudia en la actualidad y se realiza una sola medición de los datos. De fuente mixta, porque en los estadios descriptivo y explicativo se aplica un diseño de campo, al recolectar los datos directamente en las empresas objeto de estudio, mientras que para los estadios analítico y comparativo se aplica un diseño documental. Las técnicas de recolección de la información estuvieron constituidas por fuentes primarias provenientes de la observación directa, la revisión documental y la aplicación de un cuestionario estructurado tipo escala Likert. El análisis de los datos comprendió el análisis estadístico descriptivo, la estimación de la fiabilidad y el análisis de coeficientes de correlación y análisis de ruta, a través del software estadístico SPSS v.19.0 y AMOS v.20. En los estadios descriptivo y explicativo se estudió la gestión de la responsabilidad social en las empresas del sector petrolero. Los resultados indicaron que las empresas del sector petrolero actúan bajo los lineamientos trazados en el Plan de Desarrollo Nacional y de acuerdo con las políticas, directrices, planes y estrategias para el sector de los hidrocarburos, dictadas por el Ministerio de Energía y Petróleo. También incluyen el compromiso social y la política ambiental en su filosofía de gestión. Tienen en su estructura organizacional una gerencia de desarrollo social que gestiona la responsabilidad social. Las actividades de inversión social se presentan poco estructuradas y en ocasiones se improvisan ya que atienden a los lineamientos políticos del Estado y no a una política interna de sostenibilidad del negocio petrolero. En cuanto a la integralidad de la gestión las empresas no consideran la responsabilidad social en todas las áreas, por lo que deben ampliar su concepción de una gestión responsable, redefiniendo estructuras, estrategias y procesos, con una orientación hacia una gestión sustentable. En cuanto a los estadios analítico y comparativo aplicados al estudio de las guías y estándares internacionales de responsabilidad social, se determinó que en términos de la integralidad de la gestión las iniciativas que destacan son: en cuanto a los principios, las directrices para empresas multinacionales según la OCDE y el Libro Verde de la Unión Europea. En relación con las guías de implementación y control, el Global Reporting Initiative y la norma ISO 26000. Y en cuanto a los sistemas de gestión el Sistema de Gestión Ética y Responsable (SGE 21) y el Sistema de Gestión de Responsabilidad Social IQNET SR10. Finalmente se diseñó una estructura para la gestión integral de responsabilidad social basada en los estándares internacionales y en el concepto de desarrollo sostenible. Por tanto abarca el desarrollo social, el equilibrio ecológico y el crecimiento económico, lo que permite un desarrollo sinérgico. La originalidad del enfoque consistió en la comprensión de la investigación desde una concepción holística, que permitió la integración de las teorías que tratan el tema de la responsabilidad social a través de un abordaje estructurado. ABSTRACT The present research aims to design a model of social responsibility management underpinned by international standards for companies in the Venezuelan oil sector. This research is not framed in a particular epistemic model as a biased way of looking at reality. Instead, a holistic approach to the research was conducted, understanding the event under study, the management of social responsibility as an event composed of different views of the relationship between corporation and society. The term holistic refers to a trend in understanding the reality from the point of view of the multiple interactions that characterize it. It corresponds to an integrative as well as an explanatory theory that is oriented towards a contextual understanding of the processes, of the participants and of the events. From the holistic conception it was determined that this research is of a projective type. The research proposes solutions to a given situation from a process of inquiry. It implies describing, comparing, explaining and proposing alternative changes, which results in the different research stages. Regarding the research design, applying the holistic cycle, an univariate, contemporary cross-sectional and mixed source design is obtained. It is univariate, because it focuses on the management of social responsibility. It is contemporary cross-sectional, because the event is studied in the present time and a single measurement of data is performed. It relies on mixed source, because in the descriptive and explanatory stages a field design is applied when collecting data directly from the companies under study, while for the analytical and comparative stages applies a documentary design is applied. The data collection techniques were constituted by primary sources from direct observation, document review and the implementation of a structured Likert scale questionnaire. The data analysis comprised descriptive statistical analysis, reliability estimates and analysis of correlation and the path analysis through the SPSS v.19.0 and AMOS V.20 statistical software. In the descriptive and explanatory stages social responsibility management in the oil sector companies was studied. The results indicated that the oil companies operate under the guidelines outlined in the National Development Plan and in accordance with the policies, guidelines, plans and strategies for the hydrocarbons sector, issued by the Ministry of Energy and Petroleum. They also include the social commitment and the environmental policy in their management philosophy. They have in their organizational structure a social development management which deals with social responsibility. Corporate social investment is presented poorly structured and is sometimes improvised since they follow the policy guidelines of the state and not the internal sustainability policy of the oil business. As for the integrity of management companies they do not consider social responsibility in all areas, so they need to expand their conception of responsible management, redefining structures, strategies and processes, with a focus on sustainable management. As for the analytical and comparative stages applied to the study of international guidelines and standards of social responsibility, it was determined that, in terms of the comprehensiveness of management, the initiatives that stand out are the following: With respect to principles, the guidelines for multinational enterprises as indicated by OECD and the Green Paper of the European Union. Regarding the implementation and control guides, the Global Reporting Initiative and the ISO 26000 standard are relevant. And as for management systems the Ethics and Responsible Management System (SGE 21) and the IQNet SR10 Social responsibility management system have to be considered. Finally a framework for the comprehensive management of social responsibility based on international standards and the concept of sustainable development was designed. Hence, social development, ecological balance and economic growth are included allowing therefore a synergistic development. The originality of this approach is the understanding of research in a holistic way, which allows the integration of theories that address the issue of social responsibility through a structured approximation.

La crítica poética como instrumento del proyecto de arquitectura

Vivimos en un tiempo de referencias múltiples, de inquietudes en todos los ámbitos -también en el de la arquitectura-, en el que se trata de superar el peso de la historia; donde los apegos sobran y lo que interesa son las posibilidades que nos depara el presente activo. El papel de la crítica de la arquitectura se cuestiona a diario. Los nuevos media son contenedores en actualización continua y el texto ha sido sustituido inevitablemente por la imagen y la acción. En este contexto, la tesis cuestiona por que el nuevo sentido de la crítica sea el de operador que acompaña al proceso del proyecto arquitectónico. Desde el proyecto, sobre el proyecto, para el proyecto, en el proyecto, hacia el proyecto, con el proyecto. Acometiendo la acción crítica desde la complejidad de lo arquitectónico, sobre la diversidad, para la pluralidad, en lo colectivo, hacia la simultaneidad en la síntesis. Para ello, la tesis se apoya en la noción de poética –como complejidad y síntesis interna- y en cinco sistemas arquitectónicos cuya interacción no puede ignorarse –campo, programa, materia, geometría y morfología- para renovar y actualizar la usabilidad de un método crítico –el método Mirregan-Todorov- que ha obtenido reconocidos resultados; pero cuya pesada estructura limita en gran medida su campo de acción y operativa. En este sentido, no se trata ni de una tesis meramente analítica, ni de determinar unos paradigmas arquitectónicos para este siglo. Esta investigación reformula el papel de la crítica de la arquitectura hoy, y parte del orden –como autoorganización- abierto de la crítica poética para proponer una línea de trabajo sobre la interacción de sistemas arquitectónicos de una manera sinérgica y a disposición del proceso de proyecto. Disposición que lleva, como proposición final, a plantear esta actitud como instrumento docente y pedagógico de la asignatura de proyectos arquitectónicos, ya que posibilita la obtención de una serie de cartografías abiertas reflejo de los múltiples agentes y factores de influencia del presente que propician una visión compleja, pero abordable, del proyecto como totalidad. ABSTRACT We live in a time of multiple references, of concerns in all areas -also in architecture-, which tries to overcome the burden of history. A time where the attachments remain and what matters are the possibilities active present lies. The role of criticism of architecture is questioned daily. New media are continuously updated containers, and the text has been inevitably replaced by the image and the action. In this context, the thesis questions that the new sense of criticism is to be the operator that accompanies the architectural design process. From the project, on the project, for the project, in the project, to the project, with the project. An operator which undertakes the critical work from the architectural complexity, on the diversity, plurality, in the collective, to the simultaneous synthesis. To do this, the thesis is based on the notion of poetic -as complexity and internal synthesis- and in five architectural systems whose interaction cannot be ignored -field, program, material, geometry and morphology- to renovate and upgrade the usability of a critical method –the Mirregan-Todorov method- which has obtained recognized results, but whose heavy structure limits greatly its scope and operational. In this sense, it is not a purely analytical thesis. It neither tries to identify any architectural paradigms for this century. This research reformulates the role of criticism of architecture today. It runs from the open orderliness –as self-organization- of the poetic criticism to propose a line of work on the interaction of architectural systems in a synergistic manner and available to the project process. Since this attitude enables the production of a series of open mapping which reflect multiple current factors and agents of influence, this arrangement leads, as a final proposition, to raise the poetic criticism as a teaching and educational instrument of the subject of architectural design, where those maps lead to a complex, but approachable, vision of the project as a whole.

Multiscale-fiber-reinforced thermoplastic composites incorporating carbon nanotubes: A review

This article reviews recent literature on hierarchical thermoplastic-based composites that simultaneously incorporate carbon nanotubes (CNTs) and conventional microscale fibers, and discusses the structure?property relationships of the resulting hybrids. The mixing of multiple and multiscale constituents enables the preparation of materials with new or improved properties due to synergistic effects. By exploiting the outstanding mechanical, thermal and electrical properties of CNTs, a new generation of multifunctional high-performance composites suitable for a wide variety of applications can be developed.