In situ control of the GE(100)surface domain structure for III-V multijunction solar cells

Vicinal Ge(100) is the common substrate for state of the art multi-junction solar cells grown by metal-organic vapor phase epitaxy (MOVPE). While triple junction solar cells based on Ge(100) present efficiencies mayor que 40%, little is known about the microscopic III-V/Ge(100) nucleation and its interface formation. A suitable Ge(100) surface preparation prior to heteroepitaxy is crucial to achieve low defect densities in the III-V epilayers. Formation of single domain surfaces with double layer steps is required to avoid anti-phase domains in the III-V films. The step formation processes in MOVPE environment strongly depends on the major process parameters such as substrate temperature, H2 partial pressure, group V precursors [1], and reactor conditions. Detailed investigation of these processes on the Ge(100) surface by ultrahigh vacuum (UHV) based standard surface science tools are complicated due to the presence of H2 process gas. However, in situ surface characterization by reflection anisotropy spectroscopy (RAS) allowed us to study the MOVPE preparation of Ge(100) surfaces directly in dependence on the relevant process parameters [2, 3, 4]. A contamination free MOVPE to UHV transfer system [5] enabled correlation of the RA spectra to results from UHV-based surface science tools. In this paper, we established the characteristic RA spectra of vicinal Ge(100) surfaces terminated with monohydrides, arsenic and phosphorous. RAS enabled in situ control of oxide removal, H2 interaction and domain formation during MOVPE preparation.

Monitor sísmico interactivo

Este trabajo tiene como objetivos la monitorización en tiempo real de la actividad sísmica, tanto próxima como lejana, a partir de los datos sísmicos registrados por una estación de banda ancha, y el desarrollo de un sistema de difusión interactiva de información actualizada de terremotos, destinado al público general. Ambas fuentes de información se mostrarán a través de una Unidad de Visualización denominada “Monitor Sísmico Interactivo”. El registro de los datos sísmicos se realiza utilizando el sensor de tres componentes de la estación sísmica GUD, perteneciente a la Red Digital de Banda Ancha y transmisión digital del Instituto Geográfico Nacional, instalada en la Basílica del Valle de los Caídos, en lalocalidad de Guadarrama (Madrid). En la E.T.S.I. Topografía, Geodesia y Cartografía se ha instalado un ordenador con conexión a Internet, para la recepción y almacenamiento de los datos, y los programas Scream y Drumplot desarrollados por Guralp, necesarios para la monitorización de la señal sísmica en tiempo real. A partir de estos datos, mediante aplicaciones desarrolladas bajo programación Linux y haciendo uso de las herramientas que ofrece el software SAC (Seismic Analysis Code), se genera además un registro gráfico y una película animada de dicha segmentación para cada evento. Se ha configurado un servidor de correo y una cuenta para la recepción de dos tipos de mensajes de correo, enviados desde la sede central del Instituto Geográfico Nacional, con la información de los eventos registrados por GUD una vez revisados: - Mensajes enviados diariamente, con un listado de eventos ocurridos en los 30 últimos días. - Mensajes con la información en cuasi tiempo real de la última alerta sísmica. Se ha desarrollado el programa “saco” para la gestión del correo recibido que analiza la información sísmica, la almacena en ficheros y ejecuta sobre ellos las aplicaciones de dibujo. Estas aplicaciones han sido previamente desarrolladas bajo programación Linux y software GMT (Generic Mapping Tools), y a partir de ellas se generan automáticamente las distintas imágenes que se visualizan en el Monitor Sísmico: un mapa de sismicidad próxima en la Península Ibérica, un mapa de sismicidad lejana en el mundo, un mapa de detalle para localizar y representar la última alerta generada, los listados con la información de los eventos representados en los mapas, los registros gráficos y las películas animadas de dichos sismogramas. Monitor Sísmico Interactivo ha sido desarrollado para ofrecer además la posibilidad de interactuar con la Unidad de Visualización: se ha creado una base de datos para uso científico donde se almacenan todos los eventos registrados por GUD. Así el usuario puede realizar una petición, a través del envío de un mensaje de correo, que le permite visualizar de forma instantánea las imágenes que muestran la información de cualquier terremoto de su interés. ABSTRACT This study is aimed at real-time monitoring of both near and distant seismic activityfrom the seismic data recorded by a broadband seismic station, and the development of an interactive broadcast system of updated information of earthquakes, for the general public. Bothsources of information are displayed through a display unit called "Interactive Seismic Monitor". The seismic data recording is carried out by using the three-component sensor of the GUD seismic station, which belongs to the Digital Network Broadband and digital broadcast of the National Geographic Institute, housed in the Basilica of The Valley of the Fallen, in the town of Guadarrama (Madrid). A computer with Internet connection has been installed in E.T.S.I. Surveying, Geodesy and Cartography for receiving and storing data, together with Scream and Drumplot programs, developed by Guralp, which are necessary for monitoring the real time seismic signal. Based on the data collected, through programming applications developed under Linux system and using the software tools provided by the SAC (Seismic Analysis Code), a chart recorder and an animated gif image of the segmentation for each event are also generated. A mail server and a mail account have been configured for the receipt of two types of email messages, sent from the National Geographic Institute head office, with the information of the events recorded by GUD after being reviewed: - Messages sent daily, providing a list of events in the past 30 days. - Messages containing information on near real-time seismic of the last seismic alert. A program called "saco" has also been developed for handling mail received that analyzes the seismic data, which stores it in files and runs drawing applications on them. These applications have been previously developed under Linux system and software programming GMT (Generic Mapping Tools), and from them different images that are displayed on the Seismic Monitor are automatically generated: a near seismicity Iberian peninsula map, a distant seismicity world map, a detailed map to locate and represent the last seismic alert generated, the lists with the information of the events depicted in the maps,together with the charts and the animated gif image of such seismograms. Interactive Seismic Monitor has been developed to offer any user the possibility of interacting with the display unit: a database has been created for scientific use which stores all the events recorded by GUD. Thus, any user could make a request, by sending an e-mail that allows them to view instantly all the images showing the information of any earthquake of interest on the display unit.

Single optical surface imaging designs with unconstrained object to image mapping

In this work, novel imaging designs with a single optical surface (either refractive or reflective) are presented. In some of these designs, both object and image shapes are given but mapping from object to image is obtained as a result of the design. In other designs, not only the mapping is obtained in the design process, but also the shape of the object is found. In the examples considered, the image is virtual and located at infinity and is seen from known pupil, which can emulate a human eye. In the first introductory part, 2D designs have been done using three different design methods: a SMS design, a compound Cartesian oval surface, and a differential equation method for the limit case of small pupil. At the point-size pupil limit, it is proven that these three methods coincide. In the second part, previous 2D designs are extended to 3D by rotation and the astigmatism of the image has been studied. As an advanced variation, the differential equation method is used to provide the freedom to control the tangential rays and sagittal rays simultaneously. As a result, designs without astigmatism (at the small pupil limit) on a curved object surface have been obtained. Finally, this anastigmatic differential equation method has been extended to 3D for the general case, in which freeform surfaces are designed.

Digital image processing techniques as a tool for evaluating and mapping patinas on granite monuments

Monument conservation is related to the interaction between the original petrological parameters of the rock and external factors in the area where the building is sited, such as weather conditions, pollution, and so on. Depending on the environmental conditions and the characteristics of the materials used, different types of weathering predominate. In all, the appearance of surface crusts constitutes a first stage, whose origin can often be traced to the properties of the material itself. In the present study, different colours of “patinas” were distinguished by defining the threshold levels of greys associated with “pathology” in the histogram. These data were compared to background information and other parameters, such as mineralogical composition, porosity, and so on, as well as other visual signs of deterioration. The result is a map of the pathologies associated with “cover films” on monuments, which generate images by relating colour characteristics to desired properties or zones of interest.

Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys

Profiting by the increasing availability of laser sources delivering intensities above 10 9 W/cm 2 with pulse energies in the range of several Joules and pulse widths in the range of nanoseconds, laser shock processing (LSP) is being consolidating as an effective technology for the improvement of surface mechanical and corrosion resistance properties of metals and is being developed as a practical process amenable to production engineering. The main acknowledged advantage of the laser shock processing technique consists on its capability of inducing a relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly, the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Following a short description of the theoretical/computational and experimental methods developed by the authors for the predictive assessment and experimental implementation of LSP treatments, experimental results on the residual stress profiles and associated surface properties modification successfully reached in typical materials (specifically steels and Al and Ti alloys) under different LSP irradiation conditions are presented

Geometric tools in Juan de Álava's stonecutting workshop

Stonemasonry of the Gothic vault in its totality is based upon geometry of the line, whereas classic stereotomy relies on the comprehensive knowledge of the surface and the highly sophisticated sides of the voussoirs necessary for its vaults. It is obvious that this leap in the art of construction was paralleled and accompanied by an extension of the horizons of geometry. In Spain, it was made possible thanks to the centuries-old tradition of stone building begun in the most remote medieval times and to the presence of outstanding architects or stonemasons such as Juan de Álava, whose professional work surpassed the established limits and provided the art of building with new instruments.

Shadow Analysis of Soil Surface Roughness Compared to the Chain Set Method and Direct Measurement of Micro-relief.

Erosion potential and the effects of tillage can be evaluated from quantitative descriptions of soil surface roughness. The present study therefore aimed to fill the need for a reliable, low-cost and convenient method to measure that parameter. Based on the interpretation of micro-topographic shadows, this new procedure is primarily designed for use in the field after tillage. The principle underlying shadow analysis is the direct relationship between soil surface roughness and the shadows cast by soil structures under fixed sunlight conditions. The results obtained with this method were compared to the statistical indexes used to interpret field readings recorded by a pin meter. The tests were conducted on 4-m2 sandy loam and sandy clay loam plots divided into 1-m2 subplots tilled with three different tools: chisel, tiller and roller. The highly significant correlation between the statistical indexes and shadow analysis results obtained in the laboratory as well as in the field for all the soil?tool combinations proved that both variability (CV) and dispersion (SD) are accommodated by the new method. This procedure simplifies the interpretation of soil surface roughness and shortens the time involved in field operations by a factor ranging from 12 to 20.

The Influence of Different Surface Treatments on the Mechanical Strength of Silicon Wafers

The implementation of photovoltaic solar energy based on silicon is being slowed down by the shortage of raw material. In this context, the use of thinner wafers arises as a solution reducing the amount of silicon in the photovoltaic modules. On the other hand, the manufacturing process with thinner wafers can become complicated with traditional tools. The high number of damaged wafers reduces the global yield. It’s known that edge and surface cracks and defects determine the mechanical strength of wafers. There are several ways of removing these defects e. g. subjecting wafers to a mechanical polishing or to a chemical etching. This paper shows a comparison between different surface treatments and their influence on the mechanical strength.

Estudio de procesos y herramientas aplicables a la generalización vectorial de entidades lineales.

Se presenta un estudio de algoritmos que ofrecen resultados óptimos en cuanto a lo que a la generalización vectorial de entidades lineales se refiere. Este estudio se encuentra dentro del marco del proyecto CENIT España Virtual para la investigación de nuevos algoritmos de procesado cartográfico. La generalización constituye uno de los procesos cartográficos más complejos, cobrando su mayor importancia a la hora de confeccionar mapas derivados a partir de otros a mayores escalas. La necesidad de una generalización se hace patente ante la imposibilidad de representar la realidad en su totalidad, teniendo ésta que ser limitada o reducida para la posterior elaboración del mapa, manteniendo, eso sí, las características esenciales del espacio geográfico cartografiado. La finalidad, por tanto, es obtener una imagen simplificada pero representativa de la realidad. Debido a que casi el ochenta por ciento de la cartografía vectorial está compuesta por elementos lineales, la investigación se centra en aquellos algoritmos capaces de procesar y actuar sobre éstos, demostrando además que su aplicación puede extenderse al tratamiento de elementos superficiales ya que son tratados a partir de la línea cerrada que los define. El estudio, además, profundiza en los procesos englobados dentro de la exageración lineal que pretenden destacar o enfatizar aquellos rasgos de entidades lineales sin los que la representatividad de nuestro mapa se vería mermada. Estas herramientas, acompañadas de otras más conocidas como la simplificación y el suavizado de líneas, pueden ofrecer resultados satisfactorios dentro de un proceso de generalización. Abstract: A study of algorithms that provide optimal results in vector generalization is presented. This study is within the CENIT project framework of the España Virtual for research of new cartographic processing algorithms. The generalization is one of the more complex mapping processes, taking its greatest importance when preparing maps derived from other at larger scales. The need for generalization is evident given the impossibility of representing whole real world, taking it to be limited or reduced for the subsequent preparation of the map, keeping main features of the geographical space. Therefore, the goal is to obtain a simplified but representative image of the reality. Due to nearly eighty percent of the mapping vector is composed of linear elements, the research focuses on those algorithms that can process them, proving that its application can also be extended to the treatment of surface elements as they are treated from the closed line that defines them. Moreover, the study focussed into the processes involved within the linear exaggeration intended to highlight or emphasize those features of linear entities that increase the representativeness of our map. These tools, together with others known as the simplification and smoothing of lines, can provide satisfactory results in a process of generalization.

Applying concept mapping strategies to improve students’ lifelong learning in physical chemistry

Este artículo ofrece una reflexión sobre el papel de los mapas conceptuales en el actual escenario de la educación In the present paper, we carry out the application of concept mapping strategies to learning Physical Chemistry, in particular, of all aspect of Corrosion. This strategy is an alternative method to supplement examinations: it can show the teacher how much the students knew and how much they didn´t know; and the students can evaluate their own learning. Before giving tile matter on Corrosion, the teachers evaluated the previous knowledge of the students in the field and explained to the students how create the conceptual maps with Cmap tools. When the subject is finished, teachers are assessed the conceptual maps developed by students and therefore also the level of the students learning. Teachers verified that the concept mapping is quite suitable for complicated theorics as Corrosion and it is an appropriate tool for the consolidation of educational experiences and for improvement affective lifelong learning. By using this method we demonstrated that the set of concepts accumulated in the cognitive structure of every student in unique and every student has therefore arranged the concepts from top to bottom in the mapping field in different ways with different linking" phrases, although these are involved in the same learning task.

Aerial Coverage Path Planning applied to Mapping

In the last decade we have seen how small and light weight aerial platforms - aka, Mini Unmanned Aerial Vehicles (MUAV) - shipped with heterogeneous sensors have become a 'most wanted' Remote Sensing (RS) tool. Most of the off-the-shelf aerial systems found in the market provide way-point navigation. However, they do not rely on a tool that compute the aerial trajectories considering all the aspects that allow optimizing the aerial missions. One of the most demanded RS applications of MUAV is image surveying. The images acquired are typically used to build a high-resolution image, i.e., a mosaic of the workspace surface. Although, it may be applied to any other application where a sensor-based map must be computed. This thesis provides a study of this application and a set of solutions and methods to address this kind of aerial mission by using a fleet of MUAVs. In particular, a set of algorithms are proposed for map-based sampling, and aerial coverage path planning (ACPP). Regarding to map-based sampling, the approaches proposed consider workspaces with different shapes and surface characteristics. The workspace is sampled considering the sensor characteristics and a set of mission requirements. The algorithm applies different computational geometry approaches, providing a unique way to deal with workspaces with different shape and surface characteristics in order to be surveyed by one or more MUAVs. This feature introduces a previous optimization step before path planning. After that, the ACPP problem is theorized and a set of ACPP algorithms to compute the MUAVs trajectories are proposed. The problem addressed herein is the problem to coverage a wide area by using MUAVs with limited autonomy. Therefore, the mission must be accomplished in the shortest amount of time. The aerial survey is usually subject to a set of workspace restrictions, such as the take-off and landing positions as well as a safety distance between elements of the fleet. Moreover, it has to avoid forbidden zones to y. Three different algorithms have been studied to address this problem. The approaches studied are based on graph searching, heuristic and meta-heuristic approaches, e.g., mimic, evolutionary. Finally, an extended survey of field experiments applying the previous methods, as well as the materials and methods adopted in outdoor missions is presented. The reported outcomes demonstrate that the findings attained from this thesis improve ACPP mission for mapping purpose in an efficient and safe manner.

Lagrangian tools and the assessment of the predictive capacity of geophysical data sets

We examine, with recently developed Lagrangian tools, altimeter data and numerical simulations obtained from the HYCOM model in the Gulf of Mexico. Our data correspond to the months just after the Deepwater Horizon oil spill in the year 2010. Our Lagrangian analysis provides a skeleton that allows the interpretation of transport routes over the ocean surface. The transport routes are further verified by the simultaneous study of the evolution of several drifters launched during those months in the Gulf of Mexico. We find that there exist Lagrangian structures that justify the dynamics of the drifters, although the agreement depends on the quality of the data. We discuss the impact of the Lagrangian tools on the assessment of the predictive capacity of these data sets.

Aerial Coverage Path Planning applied to Mapping

In the last decade we have seen how small and light weight aerial platforms - aka, Mini Unmanned Aerial Vehicles (MUAV) - shipped with heterogeneous sensors have become a 'most wanted' Remote Sensing (RS) tool. Most of the off-the-shelf aerial systems found in the market provide way-point navigation. However, they do not rely on a tool that compute the aerial trajectories considering all the aspects that allow optimizing the aerial missions. One of the most demanded RS applications of MUAV is image surveying. The images acquired are typically used to build a high-resolution image, i.e., a mosaic of the workspace surface. Although, it may be applied to any other application where a sensor-based map must be computed. This thesis provides a study of this application and a set of solutions and methods to address this kind of aerial mission by using a fleet of MUAVs. In particular, a set of algorithms are proposed for map-based sampling, and aerial coverage path planning (ACPP). Regarding to map-based sampling, the approaches proposed consider workspaces with different shapes and surface characteristics. The workspace is sampled considering the sensor characteristics and a set of mission requirements. The algorithm applies different computational geometry approaches, providing a unique way to deal with workspaces with different shape and surface characteristics in order to be surveyed by one or more MUAVs. This feature introduces a previous optimization step before path planning. After that, the ACPP problem is theorized and a set of ACPP algorithms to compute the MUAVs trajectories are proposed. The problem addressed herein is the problem to coverage a wide area by using MUAVs with limited autonomy. Therefore, the mission must be accomplished in the shortest amount of time. The aerial survey is usually subject to a set of workspace restrictions, such as the take-off and landing positions as well as a safety distance between elements of the fleet. Moreover, it has to avoid forbidden zones to y. Three different algorithms have been studied to address this problem. The approaches studied are based on graph searching, heuristic and meta-heuristic approaches, e.g., mimic, evolutionary. Finally, an extended survey of field experiments applying the previous methods, as well as the materials and methods adopted in outdoor missions is presented. The reported outcomes demonstrate that the findings attained from this thesis improve ACPP mission for mapping purpose in an efficient and safe manner.

Mapping variability of soil water content and flux across 1¿1000 m scales using the actively heated fiber optic method

The Actively Heated Fiber Optic (AHFO) method is shown to be capable of measuring soil water content several times per hour at 0.25 m spacing along cables of multiple kilometers in length. AHFO is based on distributed temperature sensing (DTS) observation of the heating and cooling of a buried fiber-optic cable resulting from an electrical impulse of energy delivered from the steel cable jacket. The results presented were collected from 750 m of cable buried in three 240 m colocated transects at 30, 60, and 90 cm depths in an agricultural field under center pivot irrigation. The calibration curve relating soil water content to the thermal response of the soil to a heat pulse of 10 W m−1 for 1 min duration was developed in the lab. This calibration was found applicable to the 30 and 60 cm depth cables, while the 90 cm depth cable illustrated the challenges presented by soil heterogeneity for this technique. This method was used to map with high resolution the variability of soil water content and fluxes induced by the nonuniformity of water application at the surface.

Anastigmatic imaging with unconstrained object to image mapping

Anastigmatic imaging of an object to an image surfaces without the point-to-point mapping prescription and using a single optical surface is analyzed in 2D and 3D geometries (free-form and rotational-symmetric). Several design techniques are shown.