Design parameters for continuously variable power-split transmissions using planetaries with 3 active shafts

Since 1996, when the first agricultural tractor with CVT transmission was shown, the presence of this type of transmissions has been increasing. All companies offer them in their products range. Nevertheless, there is little technical documentation that explains the basics of its operation. This report shows all types of CVT transmissions: non-power-split type and power-split ones, as well as the three types used in agricultural tractors, hydro-mechanical power-split transmissions (3 active shafts, input coupled planetary; 3 active shafts, output coupled planetary and 4 active shafts). The report also describes the design parameters of a type of CVT transmission, which use a power-split system with 3 active shafts as well as the fundamental relations among them. Crown Copyright 2010 Published by Elsevier Ltd. on behalf of ISTVS. All rights reserved.

Pulsatile blood flow-split in aortic arch dissection

Abnormalities of the aortic arch, as the most proximal site of the cardiovascular system, are of great interest due to its major role in blood distribution to all downstream members. Wall dissection is one of the disorders that an aorta may suffer due to hypertension or degradation of aortic wall properties. A geometrical change of the aortic arch caused by the dissected wall, and consequently the blood flow path, makes the time-varying flow curves to be different in comparison to the healthy aortic arch. This phenomenon modifies wall shear stress (WSS) history during the cardiac cycle. In the current work, the pulsatile blood flow in a typical Stanford A (DeBakey II) dissected aorta is simulated by CFD technique, STAR-CCM+. The boundary conditions are calculated based on a combination of the impedance boundary condition and the auto-regulation concept in the cardiovascular system.

Tratamiento de imágenes de mineral acarreado post-voladura. Análisis de curvas granulométricas y comparativa mediante sistemasplit on-line y Split desktop: automático y manual

En este proyecto se han analizado distintas imágenes de fragmentos de rocas de distintas granulometrías correspondientes a una serie de voladuras de una misma cantera. Cada una de las voladuras se componen de 20 imágenes. A posteriori utilizando el programa Split Desktop en su versión 3.1, se delimitaron los fragmentos de roca de los que está compuesta la imagen, obteniéndose posteriormente la curva granulométrica correspondiente a dicha imagen. Una vez se calculan las curvas granulométricas correspondientes a cada imagen, se calcula la curva media de todas ellas, pudiéndose considerar por tanto la curva media de cada voladura. Se han utilizado las distintas soluciones del software, manual, online y automático, para realizar los análisis de dichas imágenes y a posteriori comparar sus resultados. Dichos resultados se muestran a través de una serie de gráficos y tablas que se explican con detalle para la comprensión del estudio. De dichos resultados es posible afirmar que, el tratamiento de imágenes realizado de manera online y automático por Split, desemboca en el mismo resultado, al no haber una diferencia estadística significativa. Por el contrario, el sistema manual es diferente de los otros dos, no pudiéndose afirmar cual es mejor de los dos. El manual depende del operario que trabaje las imágenes y el online de los ajustes realizados y por tanto, ambos tienen ciertas incertidumbres difíciles de solucionar. Abstract In this project, different images of rock fragments of different grain sizes corresponding to a series of blasts from the same quarry have been analyzed. To study each blast, 20 images has been used and studied with the software Split Desktop 3.1. Rock fragments from each image has been delimitated with the software, obtaining a grading curve of each one. Once these curves are calculated, the mean curve of these data set is obtained and can be considered the mean curve of each blast. Different software solutions as manual, online and automatic, has been used for the analysis of these images. Then the results has been compared between them. These results are shown through a series of graphs and tables, that are explained in detail, to enhance the understanding of the study. From these results, it can be said that the image processing with online and automatic options from Split, leads to the same result, after an statistical study. On the contrary, the manual Split mode is different from the others; however is not possible to assert what will be the best. The manual Split mode depends on the operator ability and dedication, although the online mode depends on the software settings, so therefore, both have some uncertainties that are difficult to solve.

Evaluación del funcionamiento de sistemas de análisis digital de imágenes - wipfrag (edición manual) y split online

En minería, la estimación de la curva granulométrica del escombro de voladura es importante para evaluar el diseño, ejecución y optimización de la misma. Para ello, actualmente se usan sistemas digitales de fotografías que obtienen dicha curva a partir de imágenes tomadas por una cámara. En este proyecto se ha analizado la fragmentación de seis voladuras realizadas en el año 2012 en la cantera “El Aljibe” situada en el término municipal de Almonacid de Toledo con un sistema automático en línea (Split Online) y con un software de otra compañía (WipFrag) que permite la edición manual de las imágenes. Han sido analizadas 120 imágenes de seis voladuras, elegidas aleatoriamente. Tras el estudio granulométrico, se observa que las curvas granulométricas obtenidas con ambos sistemas, estadísticamente, no son la misma en la mayor parte de la curva, por tanto, se analiza una posible relación entre los tamaños característicos X50 y X80, llegando a la conclusión de que ninguno de los sistemas es totalmente fiable, y es necesario calibrar los sistemas con datos de fragmentación reales obtenidos por medio de básculas. Abstract In mining, the estimate of the granulometric curve blasting debris is very important to evaluate the design, implementation and optimization of it. Currently, for the obtaining of this curves are used digital system of pictures taken by a camera. In this project, the fragmentation of six rock blasting were analyzed. The rock blastings are executed in 2012 in the quarry “El Aljibe” located in Almonacid de Toledo, with a automatic online system (Split Online) and a manual editing software (WipFrag). 120 randomly selected pictures have been analyzed. After the granulometric study, it appears that the size distribution curves obtained with both systems, statistically, are not the same, then, a possible relationship between the feature sizes X50 and X80 is analyzed, concluding that none of the systems is fully reliable, and systems must be calibrated with real data fragmentation obtained from data scales.

El palacio de Diocleciano en Split

Estudio preliminar de la reproducción facsímil del libro El palacio de Diocleciano en Spalato, de Jacques Zeiller, 1912. perteneciente a la serie Monumentos Arquitectónicos de España. Serie : Fondo antiguo de la Escuela Técnica Superior de Arquitectura de Madrid ; 12