Investigación de mezclas de caucho, con bajo contenido en cloro, para bandas transportadoras con características ignífugas

El objeto de la tesis doctoral se centra en la obtención de una banda transportadora de minería exenta de halógenos o al menos con el menor contenido posible, es por ello que se ha realizado un estudio de diferentes matrices poliméricas sin halógenos y se han evaluado diferentes sistemas ignifugantes. Se ha partido de mezclas con base polimérica de caucho natural y de estireno butadieno ya que son cauchos sin halógenos y con los que se pueden obtener mezclas de buenas propiedades mecánicas. Los resultados obtenidos durante el desarrollo de la tesis han sido muy satisfactorios, ya que se fabricaron bandas a gran escala para poder realizar los ensayos descritos en la normativa UNE EN 14973. La clasificación adquirida, categoría B1, alcanza dos de los objetivos marcados al inicio de los trabajos de investigación, y por tanto puede dar lugar a: - La fabricación a nivel industrial - La comercialización de una banda retardante de llama para minería y obra subterránea, formulada con un nuevo aditivo que reduce notablemente el contenido en cloro. - Disminución de la contaminación derivada de los humos tóxicos producidos cuando una banda transportadora arde accidentalmente. Los aditivos retardantes de llama sin halógenos, son muy efectivos en dosis elevadas, para la obtención de mezclas con propiedades ignífugas, pero las propiedades mecánicas de las mezclas se debilitan. Se ha buscado un compromiso entre las propiedades ignífugas y mecánicas, por lo que resulta adecuado obtener aditivos que posean un tamaño de partícula tal que actúen como cargas semi-reforzantes para poder utilizarlos en mayor proporción y así poder conseguir las propiedades ignífugas deseadas sin alterar de forma significativa las demás propiedades de la mezcla. ABSTRACT The purpose of this thesis is to obtain a mining conveyor belt with minimal halogen content, with the final objective of being halogen-free. Several polymer matrices without halogen and as well as fireproof systems have been analyzed to achieve this goal. The polymer mixtures studied are based on natural rubber and styrene butadiene, due to the fact that are rubbers without halogens and which their mixtures have good mechanical properties. The outcome of the thesis research is satisfactory, since the results are manufactured conveyor belts that comply with the tests described in the UNE EN 14973. The obtained B1 classification achieves two objectives set at the beginning of the research, and therefore can lead to: - Manufacturing at industrial level - Marketing of a flame retardant conveyor belt for mining and underground works formulated with a new additive that significantly reduces the chlorine content - Reduce pollution produced of the toxic fumes generated when a conveyor accidentally burns Additive flame retardant halogen-free are very effective in high doses to obtain blends with flame retardant properties, but the mechanical properties of the blends are below standards. A compromise between the fire retardant and mechanical properties has been successfully obtained, making possible to obtain additives that show a particle size that act as semi-reinforcing load in order to use a greater extent and thus be able to achieve the pursued fire retardant properties without altering significant other properties of mixture.

Impact parameters in relation to bruising and other fruit properties.

Impact response in fruits, primarily appl.es and pears (Pomaceae fruits), has been studied during the last five years. Using a laboratory impact testing device and also free-fall tests of instrumented apples, a significant body of results has been established, relative to the parameters which best characterize the impact response of these materials, and to their correlation with bruise damage, variety and ripeness level of the fruits. Bruise damage, measured as the size and/or volume of the affected fruit tissue is related primarily to applied energy (i.e. mainly drop height) for a given variety at a given ripeness stage. The relevant impact response parameters are maximum deformation (DM), permanent deformation (DP), maximum impulse (IM), maximum impact force (FM), maximum value of the force/time slope during impact (F/T) and impact time (T). The effect of ripeness differences was also studied in selected varieties of pears, being the most relevant parameters: maximum force (FM) and F/T slope.

Effect of integrated reservoir tillage for in-situ rainwater harvesting and other tillage practices on soil physical properties

There is a need for in-situ soil moisture conservation in arid and semi-arid regions due to insufficient rainfall for agriculture. For this purpose, a combination implement [integrated reservoir tillage system (RT)] comprised of a single-row chisel plow, single-row spike tooth harrow, modified seeder, and spiked roller was developed and compared to the popular tillage practices, viz., minimum tillage (MT) and conventional tillage (CT) in an arid Mediterranean environment in Egypt. The different tillage practices were conducted at tillage depths of 15, 20, and 25 cm and forward speeds of 0.69, 1, 1.25, and 1.53 m s-1. Some soil physical properties, runoff, soil loss, water harvesting efficiency and yield of wheat were evaluated. The different tillage practices caused significant differences in soil physical properties as the RT increased soil infiltration, producing a rate of 48% and 65% higher than that obtained in MT and CT, respectively. The lowest values of runoff and soil loss were recorded under RT as 4.91 mm and 0.65 t ha-1, whereas the highest values were recorded under CT as 11.36 mm and 1.66 t ha-1, respectively. In conclusion, the RT enhanced the infiltration rate, increased water harvesting efficiency, reduced runoff and achieved the highest yield of wheat. The best tillage operating parameters appeared to be at a tillage depth of 20 cm and speed between 1.00 and 1.25 m s-1.