CsRAV1: a candidate gene for improving lignocellulosic biomass yield

Fast-growing tree species of Populus spp.,Salix spp. and Eucalyptus spp. are cultivated to produce wood in a short time. Poplars are cultivated with cycles of 15-18 years to obtain saw timber and peeler logs, but when grown as short -rotation coppice(SRC) to produce biomass, planting density increases and rotation is considerably reduced (3-5 years). In this regard, research efforts are focused in the identification of traits and loci that allow the generation of improved SRC biomass-yielding genotypes. Biomass yield is a highly complex trait as it is the combined outcome of many other complex traits, each under separate polygenic control. Among profitable biomass yield-related traits are the amount of sylleptic branching and the length of winter dormancy. In poplar and in a few other Salicaceae species some lateral buds grow out sylleptically, the same season in which they form without the need of an intervening rest period. Sylleptic branching in poplar increases branch number, leaf area and general growth of the tree in its early years, and is a reasonable predictor of coppice yield. On the other hand, the length of winter dormancy determines the extent of the growth period. Our group has characterized the RAV1 gene of Castanea sativa (CsRAV1), encoding a transcription factor of the subfamily RAV (Related to ABI3/VP1). CsRAV1 expression shows a marked seasonal pattern, being higher in autumn and winter both in stems and buds. We generated transgenic lines of the hybrid clone Populus tremulax P. alba INRA 717 1B4 constitutively expressing CsRAV 1. These CsRAV1-expressing poplars develop sylleptic branches only a few weeks after potting. In addition to the sylleptic branching phenotype, these trees show phenological features that could give rise to an extended growth period. We are currently assessing the phenotype and behavior of these transgenic trees in a field trial, and ultimately, we will evaluate the impact on lignocellulosic biomass quality and production.

Respuestas anatómico fisiológicas frente a estrés hídrico en plantaciones de especies de crecimiento rápido para la producción de biomasa

El objetivo general de la presente Tesis es identificar algunas de las características anatómico-fisiológicas que confieren la capacidad de alcanzar una mejor productividad bajo clima mediterráneo a plantas de diversos genotipos de los géneros Populus y Eucalyptus, caracterizados por su carácter pionero, elevado crecimiento y vulnerabilidad a la cavitación. En los dos primeros capítulos se hace un seguimiento de la conductancia estomática a una selección de clones de eucalipto cultivados en invernadero, sometidos a diferentes dotaciones hídricas. Se realizaron además mediciones periódicas del pH de la savia del tallo y de la pérdida de conductividad hidráulica para investigar su implicación en la regulación química e hidraúlica del cierre estomático. Las variaciones en el pH de la savia obtenidas parecen responder a cambios en el déficit de presión de vapor de agua atmosférico y no a diferencias en la disponibilidad de agua en el suelo. La conductancia estomática presentó una correlación positiva significativa con el pH de la savia, pero no con la conductividad hidráulica. La variabilidad de la conductividad hidráulica máxima se discute a la luz de recientes investigaciones sobre los materiales constituyentes de las membranas de las punteaduras. Los clones que mostraron mayores conductancias hidráulicas y estomáticas presentaron valores más altos de producción y supervivencia, poniendo de manifiesto la utilidad del estudio de estas variables. Por el contrario, los valores más bajos de conductancia estomática e hidraúlica se encontraron en clones que han resultado un fracaso en plantaciones comerciales, en particular, fue destacable el mal resultado de un clon procedente de autocruzamiento respecto de otros híbridos. En el tercer capítulo de la tesis se estudian características anatómicas y funcionales del xilema relacionadas con la eficiencia en el transporte de agua a las hojas, y que pueden afectar directa o indirectamente a la transpiración y al crecimiento. Los estudios anatómicos fueron realizados sobre brotes anuales de chopo en una plantación situada en Granada, en condiciones de riego limitante. La combinación de rasgos anatómicos más favorable de cara a la producción de biomasa fue una densidad alta de vasos de diámetro intermedio. Los clones más productivos figuraron entre los más resistentes a la cavitación. Para estudiar el crecimiento de masas arboladas se utilizan frecuentemente parámetros fisiológicos como el índice de area foliar (LAI). La estimación del LAI a partir de fotografías hemisféricas aplicada a tallares de chopo plantados a alta densidad y a turno corto para biomasa se lleva a cabo mediante una metodología reciente empleada y discutida en el cuarto capítulo de la Tesis. Los resultados muestran que las diferencias de producción existentes entre genotipos, localidades de medición con diferentes dosis de riego, y años, pueden predecirse a partir de la determinación del índice de área foliar tanto por métodos directos como indirectos de estimación. Tanto los estudios realizados en eucalipto como en chopo han mostrado que los genotipos con menores producciones de biomasa en campo alcanzaron los menores valores de conductancia estomática en las condiciones más favorables así como el menor número de vasos en el xilema. La estrecha relación entre crecimiento y LAI confirma una vez más la importancia del desarrollo de la copa para sostener un buen crecimiento. El mayor desarrollo de la copa y rendimiento en biomasa se midieron en uno de los clones con un número de vasos más elevado, y menor vulnerabilidad a la cavitación en condiciones de estrés. Estos resultados ponen de manifiesto la importancia de las características anatómicas y funcionales del xilema como condicionantes del patrón de crecimiento de las plantas y el comportamiento de los estomas. ABSTRACT A number of anatomical xylem traits and physiological variables were analyzed in genotypes of both the Populus and Eucalyptus genera with the main aim of identifying traits in the genotypes which confer the ability to produce an acceptable biomass yield under Mediterranean climatic conditions. In the first two chapters of this PhD, the results of two experiments carried out on several clones of the species Eucalyptus globulus Labill. are presented. Chapters three and four include the results of another two trials on four poplar hybrid genotypes. One of the initial plant responses to water stress is stomatal closure, which can be triggered by hydraulic and/or chemical signals. The two first chapters of this PhD deal with trials in which stomatal conductance and percentage loss of hydraulic conductivity were monitored on a set of eucalyptus clones supplied by ENCE (former National Cellulose Company) and currently used in the company’s own commercial plantings. The experimental trials were carried out in greenhouses and the plants were submitted to two different watering regimes. The pH of the stem sap was periodically measured as the greenhouse temperature and humidity changed. The aim of these measurements was to investigate the role of both sap pH and percentage loss of hydraulic conductivity on stomatal regulation. The results obtained suggest that changes in sap pH are a response to vapor pressure deficit changes rather than to differences in soil water availability. We found significant correlation between stomatal conductance and sap pH, although no significant relationship was found between stomatal conductance and hydraulic conductivity. Variability in maximum hydraulic conductivity is discussed based on recent pit membrane constituent research. The study of hydraulic conductivity proved helpful in order to detect the clones with both higher growth and greater chance of survival, since clones displaying the lowest hydraulic conductivities were those that failed in commercial plantings. Anatomical xylem traits define the water transport efficiency to leaves and can therefore limit transpiration and growth. The third chapter of this PhD addresses anatomical xylem traits in poplar. One year old stem samples were taken from a water-stressed trial in Granada. The anatomical xylem study proved useful for detecting the lowest yielding genotypes. Clones with intermediate vessel size and high vessel densities were found to be those with the highest biomass yield. Differences in cavitation resistance depending on the clone tested and the water treatment applied were also found. The clones with the highest biomass yield were found to be among the most cavitation resistant clones in each watering regime. Xylem and physiological traits along with stomatal behavior are useful tools to determine plant growth. In order to study plantings or forests, it is more common to employ other physiological variables such as leaf area index (LAI). LAI estimation from hemispherical photographs applied to short rotation woody crops is a recently developed method that still requires fine tuning through further investigation. In the fourth chapter, data from LAI monitoring over two consecutive years were analyzed in two different locations where different irrigation treatments were applied. The results showed that differences in yield between genotypes, different irrigation regimes and years could be predicted by using the LAI estimates, either through direct or indirect estimation methods. Our studies of poplar and eucalyptus have shown that the field-grown genotypes with the lowest biomass yield displayed the lowest values of stomatal conductance under the most favorable environmental conditions and also had a low number of xylem conduits. The close relationship between LAI and growth highlights the importance of crown development in biomass growth. The highest LAI and biomass yield were recorded in one of the clones with higher vessel density and the lowest vulnerability to cavitation under stress conditions. These results underline the importance of research into anatomical and functional traits as factors influencing plant growth patterns and stomatal behavior.

Seasonal evolution of soil respiration in a mixed forestry plantation of walnuts (Juglans × intermedia Carr.) and alders (Alnus cordata (Loisel.) Duby) in Domaine de Restinclières (France)

The ecological intensification of crops is proposed as a solution to the growing demand of agricultural and forest resources, in opposition to intensive monocultures. The introduction of mixed cultures as mixtures between nitrogen fixing species and non nitrogen fixing species intended to increase crop yield as a result of an improvement of the available nitrogen and phosphorus in soil. Relationship between crops have received little attention despite the wide range of advantages that confers species diversity to these systems, such as increased productivity, resilience to disruption and ecological sustainability. Forests and forestry plantations can develop an important role in storing carbon in their tissues, especially in wood which become into durable product. A simplifying parameter to analyze the amount allocated carbon by plantation is the TBCA (total belowground carbon allocation), whereby, for short periods and mature plantations, is admitted as the subtraction between soil carbon efflux and litterfall. Soil respiration depends on a wide range of factors, such as soil temperature and soil water content, soil fertility, presence and type of vegetation, among others. The studied orchard is a mixed forestry plantation of hybrid walnuts(Juglans × intermedia Carr.) for wood and alders (Alnus cordata (Loisel.) Duby.), a nitrogen fixing specie through the actinomycete Frankia alni ((Woronin, 1866) Von Tubeuf 1895). The study area is sited at Restinclières, a green area near Montpellier (South of France). In the present work, soil respiration varied greatly throughout the year, mainly influenced by soil temperature. Soil water content did not significantly influence the response of soil respiration as it was constant during the measurement period and under no water stress conditions. Distance between nearest walnut and measurement was also a highly influential factor in soil respiration. Generally there was a decreasing trend in soil respiration when the distance to the nearest tree increased. It was also analyzed the response of soil respiration according to alder presence and fertilizer management (50 kg N·ha-1·año-1 from 1999 to 2010). None of these treatments significantly influenced soil respiration, although previous studies noticed an inhibition in rates of soil respiration under fertilized conditions and high rates of available nitrogen. However, treatments without fertilization and without alder presence obtained higher respiration rates in those cases with significant differences. The lack of significant differences between treatments may be due to the high coefficient of variation experienced by soil respiration measurements. Finally an asynchronous fluctuation was observed between soil respiration and litterfall during senescence period. This is possibly due to the slowdown in the emission of exudates by roots during senescence period, which are largely related to microbial activity.