Educational Activities to Help Transferring Knowledge in Nuclear: The Seminars of Spanish Young Generation in Nuclear (Jóvenes Nucleares)

From its creation, Spanish Young Generation in Nuclear (Jóvenes Nucleares, JJNN), a non-profit organization that depends on the Spanish Nuclear Society (SNE), has as an important scope to help transferring the knowledge between those generations in the way that it can be possible.

Helping to Close the Generational Gap in Nuclear: The Seminars and Conferences of Spanish Young Generation in Nuclear (Jóvenes Nucleares)

As in each country of Europe with nuclear power, there is a clear gap between those generation that have built the power plants in the eighties and the new generations with less than ten years of experience in the nuclear field. From its creation, Spanish Young Generation in Nuclear (Jóvenes Nucleares) has as an important scope to help transferring the knowledge between those generations in the way that it can be possible. Some years ago, JJNN have started organizing seminars periodically trying to cover as many areas as possible in the nuclear engineering field, and some of them outside the industry but related with it.

International Materials Science Seminars: A Bridge between Two Continents

International Materials Science Seminars aim at combining the expertise of several advanced research groups and creating an unique opportunity for foreign and Spanish students in terms of cutting-edge research.

Virtual Learning Environments In Faculties Of Education In Spain: Changes On Student Attitude

This paper presents some results of a R+D project entitled “e-Learning system for Practical Training of University students in Education Faculties (ForELearn)”, developed in Spain by the Universidad de Granada and the Universidad Politécnica de Madrid and funded by the Spanish Ministry of Education. In a first phase, through the use of AulaWeb Learning Management System, a set of adaptations and improvements of this software application have been done for the design and development of an experimental course of Practicum supervision. Next, the implementation of this course by means of a group of face to face and online seminars provides experimental data for the analysis and discussion about the point of view of users (preservice teachers) that have tracked their practice supervision with AulaWeb.

Metodología para medir beneficios de la ciudad Puerto de Valparaíso Chile, con relación a la actividad marítima portuaria

La presente tesis propone una metodología para medir variables de impacto socio económico en la ciudad Puerto de Valparaíso, como una alternativa que permite evaluar la asignación del uso y explotación del borde costero. La ciudad de Valparaíso se formó al alero de la actividad marítima portuaria, en sus comienzos esta actividad fue el motor de desarrollo económico de la ciudad, sus habitantes mantenían una alta dependencia de ésta actividad, formando una identidad y cultura portuaria. Con la decadencia de la actividad portuaria, producto principalmente a la construcción del canal de Panamá y a la modernización de los buques de transporte aumentando su distancia franqueable1, la ciudad fue dejando su dependencia de esta actividad. Hoy en día casi la totalidad del borde costero de la ciudad está asignado a las actividades portuarias con escasa participación laboral de los habitantes de la ciudad y una alta demanda urbana por el uso del borde costero. Por otra parte, la ciudad ha presentado en la última década altos niveles de cesantía, cuestionándose la verdadera utilidad de mantener un puerto en la ciudad. La investigación de la tesis permitió dimensionar la cantidad de firmas y actividades económicas que se desarrollaban en torno a la actividad marítima portuaria en la ciudad, cuantificando los empleos que éstas otorgaban a la ciudad, los niveles de remuneraciones, los tributos a la municipalidad de la ciudad, el aporte al comercio local, entre otros. Descubriéndose hallazgos que permiten reflexionar sobre la importancia del la actividad en el desarrollo económico actual y futuro de la ciudad. También los antecedentes obtenidos permiten contribuir a la evaluación de proyectos alternativos para el uso y explotación del borde costero. La metodología utilizada también puede ser adaptada para medir los beneficios de otras ciudades puertos en el mundo. Los resultados obtenidos fueron expuestos a las autoridades gubernamentales locales, presentados en seminarios y congresos nacionales e internacionales, como en la prensa local; los más destacados son: la actividad otorga 12.727 empleos directos e indirectos que corresponden al 12% de la fuerza laboral ocupada; la actividad representa el 19% del Producto Interno Bruto de la ciudad; la actividad aporta un 21% al presupuesto municipal por concepto de recaudación de tributos y representan un 11% del presupuesto total asignado al municipio por el Estado de Chile. El sector industrial marítimo-portuario de la ciudad sigue siendo la actividad industrial más relevante en la ciudad y demanda el desarrollo de una planificación estratégica que permita vincular la actividad turística de la ciudad vecina de Viña del Mar con la actividad portuaria de Valparaíso. Para lograr tal objetivo es necesario realizar cambios en los atributos de las operaciones portuarias que permitan ofrecer productos asociados al turismo. This thesis proposes a methodology to measure the socio economic variables in the port city of Valparaiso, as an alternative to evaluate the allocation of the usage and exploitation of the coastline. The city of Valparaiso was formed to advance the port maritime activity and in the beginning this activity was the engine of economic development of the city. Its inhabitants remained highly dependent on it and formed a port identity and culture. With the decline of port activity, mainly due to the construction of the Panama Canal and the modernization of the transport vessels increasing distances, the city lost its dependence on this activity. Today almost all of the coastline of the city is assigned to port activities with very little labor participation of the inhabitants of the city and a high demand for the use of urban waterfront. Moreover, the city has shown high levels of unemployment in the past decade, questioning the true value of maintaining a port in the city. The research of this thesis provides insights into the number of firms and economic activities that were developed around the port maritime activity in the city, quantifying the jobs they gave to the city, the levels of pay, taxes to the municipality of city and the contribution to local commerce, among others. The findings discovered allow reflexions on the importance of the activity in the current and future economic development of the city. The data obtained also allows a contribution of the evaluation of alternative projects for the use and exploitation of the coastline. The methodology can also be adapted to measure the benefits of other port cities in the world. The results were presented to local government authorities, at seminars and national and international conferences, and in the local press. The most important finding are: the activity maritime port activity provides 12,727 direct and indirect jobs that are 12% of the employed labor force; activity represents which is 19% of the GDP of the city, the activity contributes 21% to the municipal budget by way of the collection of taxes and represents 11% of the total budget allocated to the municipality by the Republic of Chile. The industrial maritime port sector of the city remains the most important industrial activity in the city and demands the development of strategic planning to link the tourism in the neighboring city of Viña del Mar and to the Valparaiso port activity. To achieve this goal it is necessary to make changes to the attributes of port operations that allow the offering of products associated with tourism.

TELMA: Technology enhanced learning environment for minimally invasive surgery

Background: Cognitive skills training for minimally invasive surgery has traditionally relied upon diverse tools, such as seminars or lectures. Web technologies for e-learning have been adopted to provide ubiquitous training and serve as structured repositories for the vast amount of laparoscopic video sources available. However, these technologies fail to offer such features as formative and summative evaluation, guided learning, or collaborative interaction between users. Methodology: The "TELMA" environment is presented as a new technology-enhanced learning platform that increases the user's experience using a four-pillared architecture: (1) an authoring tool for the creation of didactic contents; (2) a learning content and knowledge management system that incorporates a modular and scalable system to capture, catalogue, search, and retrieve multimedia content; (3) an evaluation module that provides learning feedback to users; and (4) a professional network for collaborative learning between users. Face validation of the environment and the authoring tool are presented. Results: Face validation of TELMA reveals the positive perception of surgeons regarding the implementation of TELMA and their willingness to use it as a cognitive skills training tool. Preliminary validation data also reflect the importance of providing an easy-to-use, functional authoring tool to create didactic content. Conclusion: The TELMA environment is currently installed and used at the Jesús Usón Minimally Invasive Surgery Centre and several other Spanish hospitals. Face validation results ascertain the acceptance and usefulness of this new minimally invasive surgery training environment.

Educational innovation applied in the UNESCO chair of mining and industrial heritage

The “Innovatio Educativa Tertio Millennio” group has been 10 years developing educational innovation techniques, actually has reached the level of teaching on the technical teachers has developed, and share them with other groups, that can implement them in their teaching activities. UNESCO Chair of Mining and Industrial Heritage has been years working on heritage, and on the one hand teaching in conservation and maintenance of heritage, and on the other doing raise awareness of the meaning of heritage, the social value and as must be managed effectively. Recently these two groups work together, thus is spreading in a much more effective manner the concepts of heritage, its meaning, its value, and how to manage it and provide effective protection. On one hand being a work of dissemination based on internet and on radio broadcasting, and on the other one of teaching based on educational innovation, and courses, conferences, and face-to-face seminars or distance platforms.

The seminar of nuclear safety in advanced reactors and the seminar of nuclear fusion: two formative initiatives from Universidad Politécnica de Madrid and spanish young Generation in Nuclear (Jóvenes Nucleares)

panish Young Generation in Nuclear (Jóvenes Nucleares) is a commission of the Spanish Nuclear Society (SNE), whose main goals are to spread knowledge about nuclear energy among the society. Following this motivation, two Seminars have been carried out with the collaboration of the Technical University of Madrid: The Seminar of Nuclear Safety in Advanced Reactors (SRA) and the Seminar of Nuclear Fusion (SFN). The first one, which has been celebrated every year since 2010, aims to show clearly the advances that have been obtained in the section of safety with the new reactors, from a technical but simple point of view and without needing great previous nuclear engineering knowledge. The second one, which first edition was held in 2011, aims to give a general overview of the past, present and future situation of nuclear fusion technology, and was born as a result of the increasing interest of our Spanish Young Generation members in this technology.

Building the qualification and a skill development program within the ENEN-III European Project

The ENEN III project covers the structuring, organization, coordination and implementation of training schemes in cooperation with local, national and international training organizations, to provide training to professionals active in nuclear organizations or their contractors and sub-contractors. The training schemes provide a portfolio of courses, training sessions, seminars, and workshops for continuous learning for upgrading knowledge and developing skills. The training schemes allow individuals to acquire qualifications and skills, as required by the specific positions in the nuclear sector which will be documented in a training passport. The essence of such passport is to be recognized within the EU by the whole nuclear sector which provides mobility to the individual looking for employment and an EU wide recruitment field for the nuclear employers.

Using multimedia and peer assessment to promote collaborative e-learning

Collaborative e-learning is increasingly appealing as a pedagogical approach that can positively affect student learning. We propose a didactical model that integrates multimedia with collaborative tools and peer assessment to foster collaborative e-learning. In this paper, we explain it and present the results of its application to the “International Seminars on Materials Science” online course. The proposed didactical model consists of five educational activities. In the first three, students review the multimedia resources proposed by the teacher in collaboration with their classmates. Then, in the last two activities, they create their own multimedia resources and assess those created by their classmates. These activities foster communication and collaboration among students and their ability to use and create multimedia resources. Our purpose is to encourage the creativity, motivation, and dynamism of the learning process for both teachers and students.

Sistema web de gestión de seminarios

El Trabajo de Fin de Grado (TFG) aquí descrito es el resultado de la necesidad de crear un sistema de gestión de seminarios que utilizarán los planes de postgrado de la Escuela Técnica Superior de Ingenieros Informáticos de la Universidad Politécnica de Madrid. Su objetivo es facilitar, tanto al alumnado como al personal de dicha institución, la creación de seminarios ofertados para el alumnado de los distintos planes de postgrado, además de permitir la inscripción de éstos de un modo cómodo e intuitivo. La aplicación de gestión de seminarios deberá permitir que los coordinadores de un plan de postgrado puedan crear seminarios de tal manera que puedan quedar publicados para el alumnado. Para ello, será necesario que sean recogidos todos los datos necesarios del seminario, así como el plan de postgrado organizador y los planes de postgrado para los que serán ofertados. La aplicación además deberá permitir la creación de seminarios sin ser publicados al alumno provisionalmente, la edición de los seminarios ya existentes así como la creación de un seminario nuevo importando los datos de otro ya realizado. Por otra parte, se deberá incorporar en las páginas web de planes de postgrado el listado de los seminarios ofertados para el curso actual, de tal manera que se permita a los alumnos inscribirse a éstos. Por último, el personal de administración del plan de postgrado organizador de un seminario deberá tener acceso a la lista de alumnos inscritos a los seminarios, para el caso de enviar información urgente o ver los alumnos inscritos. El módulo de gestión de seminarios deberá obtener los datos de los planes de postgrado actuales gracias a un módulo de gestión de postgrados, donde se deberá permitir crear, editar y dar de baja planes de postgrado, así como gestionar el personal del postgrado que podrá realizar acciones sobre los seminarios organizados por éste. Los módulos de gestión de seminarios y de gestión de postgrados estarán integrados en un módulo de administración.---ABSTRACT---The Final Project Degree (TFG) described here is the result of the need to create a management system that will use seminars postgraduate plans at the Higher Technical School of Computer Engineering at the Universidad Politécnica de Madrid. It aims to facilitate both the students and staff of the institution, creating seminars offered to the students of the various postgraduate plans, besides allowing the registration of these in a convenient and intuitive way. The management application will allow the coordinators of a postgraduate plan to create seminars so that they can be published for students. To do this, you will need to collect all the necessary details about the seminar, as well as the postgraduate plan owner and postgraduate plans for which it will be offered. The application must also enable the creation of seminars without being published provisionally to students, the editing of existing seminars and the creation of a new seminar importing data from another already done. Moreover, it should be incorporated into web pages of postgraduate plans seminars listing offered for the current course, so that students are allowed to enrol in these. Finally, the staff of the plan organizer should have access to the list of students enrolled at seminars, in the case of sending urgent information or to see students enrolled. The management module must obtain data from current postgraduate plans through a postgraduate management module, which should be allowed to create, edit and terminate postgraduate plans, and manage staff that can perform actions on seminars organized by it. Management modules of seminars and postgraduate programs will be integrated into a management pack.

Artefactos energéticos : de Fuller a Piñero (1961-1972) = Energetic artefacts : from Fuller to Piñero (1961-1972)

La obra de Emilio Pérez Piñero que se desarrolla entre los años 1961 y 1972 año en el que muere en un accidente de tráfico volviendo de Figueras, se centra principalmente en artefactos desplegables y desmontables, ejecutando prototipos que en el presente trabajo se han dividido en dos grupos; la cúpula reticular y la infraestructura. No pudo por tanto acudir al Congreso de 1972 de la UIA a recoger el premio Auguste Perret a la innovación tecnológica, que en años anteriores habían recibido Félix Candela, Jean Prouvé, Hans Scharoun o Frei Otto, y que en aquella ocasión tuvo que recoger su viuda. Parámetros como el de la movilidad, indeterminación, intercambiabilidad, obsolescencia y otros que se analizan en el presente trabajo, aparecen a lo largo de toda su obra ya que muchos de sus artefactos están ubicados en no-lugares y tienen un carácter itinerante y por tanto se hace indispensable su rápido montaje y desmontaje, que unas veces se resuelve mediante la desmontabilidad y otras con la plegabilidad de éstos. Aunque pueda parecer Piñero una figura autárquica, lo cierto es que durante la década donde concentra su trabajo se produce una explosión en torno a al arquetipo que será denominado de forma genérica `artefacto´, ligado conceptualmente a los parámetros que aquí se definen. Entendemos artefacto como objeto material realizado por una o varias personas para cumplir una función, es sinónimo de máquina y aparato y deriva de las palabras latinas ars o artis (técnica) y facto (hecho), para designar a los objetos cuya fabricación requiere alguna destreza. El término latino `ars´ engloba a las técnicas y a las artes, lo que no ocurre con el término castellano arte que deriva de él. Los movimientos utópicos que comparte la década con Piñero, utilizan el arquetipo infraestructural, ligero y high tech, para a través de una arquitectura más ligada a la ciencia ficción, realizar una crítica al Movimiento Moderno institucionalizado, todos ellos comparten cierta obsesión por la movilidad, ligada ésta a la idea de espacio flexible, dinámico, nómada. Este concepto de neo-nomadismo, que representa un habitar dinámico, aglutina las nuevas formas de vivir donde la movilidad social y geográfica son habituales. El nomadismo, por otra parte se entiende como sinónimo de democracia y libertad. La arquitectura pasa de ser pesada, estática, permanente a ser un elemento dinámico en continuo movimiento. A veces con connotaciones biológicas se asimilan los artefactos a organismos vivos y les confieren dichas propiedades de crecimiento y autonomía energética, acumulándose en torno a megaestructuras, donde quedan `enchufados´. En este intento de dotar movilidad a lo inmueble, se buscan estructuras vivas y modificables que crecen en una asimilación de las leyes naturales utilizando los parámetros de metamorfosis, simbiosis y cambio. Estos movimientos de vanguardia tienen también ciertas connotaciones políticas y sociales basadas en la libertad y la movilidad y reniegan del consumismo institucionalizado, de la arquitectura como instrumento de consumo, como objeto de usar en la cultura de masas. El carácter político de la autogestión, de la customización como parámetro proyectual, de la autosuficiencia energética, que anticipa la llegada de la crisis energética del año 1973. Objeto de este trabajo será relacionar los conceptos que aparecen fuertemente en el entorno de la década de los años sesenta del siglo XX, en el trabajo de Emilio Pérez Piñero. Parámetros encontrados como conceptos en los grupos de vanguardia y utopía a su vez fuertemente influenciados por las figuras del ingeniero Richard Buckminster Fuller y del arquitecto Konrad Wachsmann. Se analizará que posible influencia tiene la obra de Fuller, principalmente el prototipo denominado cúpula reticular, en la obra de Pérez Piñero y sus coetáneos analizando sus pensamientos teóricos en torno a parámetros como la energía, principalmente en las teorías relativas a Synergetics. El término inventado por Richard B. Fuller es una contracción de otro más largo que en inglés agrupa tres palabras; synergetic-energetic geometry. La definición de sinergia es la cooperación, es decir es el resultado de la acción conjunta de dos o más causas, pero con un efecto superior a la suma de estas causas. El segundo término, energetics geometry, que traducido sería geometría energética hace referencia en primer lugar a la geometría; ya que desarrolla el sistema de referencia que utiliza la naturaleza para construir sus sistemas y en segundo lugar a la energía; ya que además debe ser el sistema que establezca las relaciones más económicas utilizando el mínimo de energía. Por otro lado se analiza la repercusión del prototipo denominado Infraestructura, término acuñado por Yona Friedman y basado estructuralmente y conceptualmente en los desarrollos sobre grandes estructuras de Konrad Wachsmann. El arquitecto alemán divulga su conocimiento en seminarios impartidos por todo el mundo como el que imparte en Tokio y se denomina Wachsmann´s Seminar donde participan algunos de los componentes del grupo Metabolista que sorprenderán al mundo con sus realizaciones en la exposición de Osaka de 1970. El intervalo temporal entre 1961 hasta 1972 hace referencia a la horquilla donde Pérez Piñero realiza su obra arquitectónica, que comienza en 1961 cuando gana el concurso convocado en Londres por la UIA (Unión Internacional de Arquitectos) con el proyecto conocido como Teatro Ambulante, hasta 1972 que es cuando fallece volviendo de Figueras donde está realizando dos encargos de Salvador Dalí; la cubrición del escenario del futuro Teatro-Museo Salvador Dalí y la Vidriera Hipercúbica que debía cerrar la boca de tal escenario. Bajo el título de `Artefactos energéticos. De Fuller a Piñero (1961-1972)´, se presenta esta Tesis doctoral, que tiene la intención de vincular la obra de Emilio Pérez Piñero con la de las neo vanguardias producidas por una serie de arquitectos que operan en el ámbito internacional. Estas vinculaciones se producen de una forma general, donde a través de una serie de estrategias según la metodología que posteriormente se describe se buscan relaciones de la obra del autor español con algunos de los movimientos más significativos que aparecen en dicha década y de manera específica estableciendo relaciones con las obras y pensamientos de los autores que pertenecen a estos movimientos y donde estas relaciones se hacen más evidentes. El objeto del presente trabajo es analizar y explicar la obra del arquitecto Emilio Pérez Piñero, que espacialmente se localiza en el territorio español, desde el punto de vista de estos movimientos para posteriormente poder determinar si existen puntos en común y si el arquitecto español no solo comparte la década temporalmente sino también conceptualmente y por tanto utiliza el ideario que utilizan sus coetáneos que forman parte de las neovanguardias de los años sesenta de siglo XX. ABSTRACT ABSTRACT The Work of Emilio Perez Piñero was developed between the years 1961 and 1972 when he died in a car accident coming back from Figueres, where he was building a geodesic dome to close the building that enclose the Dali’s museum. All his Work is mainly centered in artifact that could be collapsible and removable, taking the two prototypes that are described in this work as a recurrent element in all his creation. These are the reticular dome and the infrastructure that are very influenced by the work from Richard B. Fuller and Konrad Wachsmann. Emilio Pérez Piñero could not receive the Auguste Perret Prize in 1972 awarded by the UIA that years before have received architects as Felix Candela, Jean Prouvé, Hans Scharoun or Frei Otto, and this time Pérez Piñero´s wife will accept it because of his death. Parameters like mobility, changeability, expendability, indetermination and others appear currently in his Work. All the inventions that Piñero had been patented and all of the artifacts that he created are usually located in no-places, because they do have a shifting identity. This kind of building has to be quickly set on site, and this problem has to be solved in term of foldability or demounting. In the decade where his work focuses, an explosion has occurred around this archetype to be generally called artifact that is usually linked to mobility. We understand artifact as a material object made by one or more people to work in a particular way. It is sometimes equated with the terms machinery and apparatus and it is derived from the Latin word `ars´ or `artis´, what means techniques and `facto´ (fact). And we use this term to refer to objects whose manufacture requires the same skill, in fact the Latin word `ars´ covers the techniques and arts, which does not occur with the Castillan term `arte´ that derives from it and means only art. The term neo-nomadic is a relatively new name used for a dynamic life, commonly referred to new forms of life where social and geographical mobility are common. On the other hand nomadic could be understood as a synonymous for democracy and freedom. The architecture is not going to be hard and static anymore but a dynamic element in the move. The Neo-avant-garde movement that shares the decade with Piñero uses this infrastructural archetype, which is light and high-tech, to criticize the institutionalized Modern Movement through architecture linked to science fiction. They all share an obsession with mobility, a concept that is connected to the terms `dynamic´, `nomadic´, `flexibile´, etc. Sometimes, with biological connotations, the utopian assimilate the artifacts to living organisms and give them these properties of growth and energy autonomy, and they apparently grow around megastructures where they are plugged. In this attempt to provide mobility to the inertness, living structures and possibility of change are sought in order to make them grow like a living organism and to assimilate the natural laws of growth. According to a definition from architecture provided by Fernández- Galiano who calls it `exosomatic artifact´, he understand architecture as artifact of the human environment that regulates natural energy flows and channels the energy stored in fuels for the benefit of living beings that inhabit. It is also true that during the sixties a new environmental awareness in public opinion is formed and that is due to the exploitation and disproportionate use of energy resources, acceleration of technological processes and mass consumption. Consequently a new concept is born: energy autonomy, it is very close to rational use of natural energy. Such a concept will be culturally assimilated with the requirement of independence not only in the management but also in the building construction until we arrive at energy autonomy. The individuals become energy consumer, which in turn can enter the energy produced in the system to `life in an eco-mode way´. The objectives of this research are analyzing all of these parameters and concepts that are coming into view in the surrounding of the decade and relate them with the Work of Pérez Piñero. Terms strongly present in the avant-garde movements around the decade, a young architect’s generation strongly influenced by Richard B. Fuller and Konrad Wachsmann. However, it will be analyzed how important the influence of Buckminster Fuller's Work was and his theoretical text about energy on the Work of Pérez Piñero and his fellows of the decade. The term Synergetic was invented by Fuller and came from the words synergy and energetic geometry. Synergy is the cooperation or interaction of two or more agents to produce a greater effect than the sum of their separate effects. Energetic geometry is related to the geometries that the Nature is using to build their construction but always using low energy consumption. On the other hand, the influences from Wachsmann around the prototype called Infrastructure have been analyzed. The German architect has developed knowledge around huge structures that he has spread all around the world through seminars that he has been conducted. One of these was the Wachsmann´s seminar in Tokyo, where same of the members of the Metabolist group were taking part of. Later these young architects will surprise the world with his artifacts at the World Exposition in Osaka in 1970. Between 1961 and 1972 Pérez Piñero produced his architectural work. It began in 1961 when he received the first prize with his project Mobile Theatre in the competition organized by the UIA in London. In 1972 the Auguste Perret Prize was granted by the UIA too. He could not accept it because he died before in a car accident when he was coming from Figueres, when he was designing two projects for Dali. With the title `Energetic Artifacts. From Fuller to Piñero (1961- 1972)´, this thesis relates the Work of Emilio Pérez Piñero with the neo avant-garde made by a young architects’ generation who is sharing the time with him. Several strategies have been used to formed relationships between them. They are described in the present work to set up a method that allows us to relate the work and ideas of the architects of the neo avant-garde with the ones from Piñero. This work is intended to analyze and explained the work of Pérez Piñero from the point of view of the international architects’ generation who is operating at the same time and finally to determinate if Piñero is not sharing the time with them but the concepts, ideas and architectural parameters.