Traditional Building Adaptation to New Requirements: Historic Center of Arequipa, Perú

The traditional buildings in the historic center of the city of Arequipa, Perú, recently declared of human heritage, are of volcanic tuff both in walls and in vaulted roofs on the ground floor. Having been built in the 18th century and up to the beginning of the 20th century, they have suffered many damages from the seismic movements registered in this region. Due to this, many of them have had to be rebuilt. In this presentation, the different changes to adapt the city of Spanish colonial origin to the present tertiary use are analyzed.

Identifying Moderator Variables Through Requirements Elicitation Experiments Limitations

Interviews are the most widely used elicitation technique in Requirements Engineering (RE). Despite its importance, research in interviews is quite limited, in particular from an experimental perspective. We have performed a series of experiments exploring the relative effectiveness of structured and unstructured interviews. This line of research has been active in Information Systems in the past years, so that our experiments can be aggregated together with existing ones to obtain guidelines for practice. Experimental aggregation is a demanding task. It requires not only a large number of experiments, but also considering the influence of the existing moderators. However, in the current state of the practice in RE, those moderators are unknown. We believe that analyzing the threats to validity in interviewing experiments may give insight about how to improve further replications and the corresponding aggregations. It is likely that this strategy may be applied in other Software Engineering areas as well.

Estudio de viabilidad para instalar una planta de cogeneración

En el presente proyecto se estudia la viabilidad, tanto técnica como económica, de la instalación de una planta de cogeneración, en una industria alimentaria en Aldaya (Valencia). El diseño de la central de cogeneración se basa en la demanda energética de la fábrica, atendiendo a los requisitos necesarios para acogerse al Régimen Especial de producción de energía eléctrica establecidos en el Real Decreto 661/2007, de 25 de mayo. En cuanto a la viabilidad económica, se ha elegido la alternativa de venta de electricidad a la red a tarifa, (a un precio fijo y regulado) con el fin de asegurar los ingresos en el estudio económico y reducir la sensibilidad del proyecto a las variables del mercado. Como resultado se obtienen la reducción de los costes de energía de la fábrica, mejora de la fiabilidad de suministro, reducción de emisiones globales de CO2, y una elevada rentabilidad del proyecto. ABSTRACT The aim of this project is to study the technical and economic feasibility of a cogeneration plant in a food industry in Aldaya (Valencia). The design of the cogeneration plant is based on the energetic demand of the factory, attending to the requirements specified in the Special Regime of production of electric power established in the R.D. 661/2007. The studied alternative in terms of economic viability is selling electricity to the net by tariff, which is a fixed and regulated price in order to assure the revenue in the economic study and to reduce the project sensitivity to the market variation. The results obtained are: reduction in energy costs of the fabric, improvement of reliability in the electrical supply, reduction of global CO2 emission, and high profitability of the project.

Experiences of spanish public administration in requirements management and acquisition management processes

This paper shows the main contributions of the 1st Symposium on Improvement Process Models and Software Quality of Public Administrations. The obtained results expose the need to promote the implementation of Software Maturity Models and show possible advantages of its application in software processes of Public Administrations. Specifically, it was analyzed the current status in two process areas: Requirements Management and Subcontracting Management.

Energy requirements in pressure irrigation systems

Modernization of irrigation schemes, generally understood as transformation of surface irrigation systems into pressure –sprinkler and trickle- irrigation systems, aims at, among others, improving irrigation efficiency and reduction of operation and maintenance efforts made by the irrigators. However, pressure irrigation systems, in contrast, carry a serious energy cost. Energy requirements depend on decisions taken on management strategies during the operation phase, which are conditioned by previous decisions taken on the design project of the different elements which compose the irrigation system. Most of the countries where irrigation activity is significant bear in mind that modernization irrigation must play a key role in the agricultural infrastructure policies. The objective of this study is to characterize and estimate the mean and variation of the energy consumed by common types of irrigation systems and their management possibilities. The work includes all processes involved from the diversion of water into irrigation specific infrastructure to water discharge by the emitters installed on the crop fields. Simulation taking into account all elements comprising the irrigation system has been used to estimate the energy requirements of typical irrigation systems of several crop production systems. It has been applied to extensive and intensive crop systems, such us extensive winter crops, summer crops and olive trees, fruit trees and vineyards and intensive horticulture in greenhouses. The simulation of various types of irrigation systems and management strategies, in the framework imposed by particular cropping systems, would help to develop criteria for improving the energy balance in relation to the irrigation water supply productivity.

Verifying ontology requirements with SWIP

Verifying whether an ontology meets the set of established requirements is a crucial activity in ontology engineering. In this sense, methods and tools are needed (a) to transform (semi-)automatically functional ontology requirements into SPARQL queries, which can serve as unit tests to verify the ontology, and (b) to check whether the ontology fulfils the requirements. Thus, our purpose in this poster paper is to apply the SWIP approach to verify whether an ontology satisfies the set of established requirements.

Applying foresight tools to determine future demand requirements on tourist destinations

Applying foresight tools to determine future demand requirements on tourist destinations

An Agent Architecture to fulfill Real-Time Requirements

In this paper we present AMSIA, an agent architecture that combines the possibility of using di erent reasoning methods with a mechanism to control the resources needed by the agent to ful ll its high level objectives. The architecture is based on the blackboard paradigm which o ers the possibility of combining di erent reasoning techniques and opportunistic behavior. The AMSIA architecture adds a representation of plans of objectives allowing di erent reasoning activities to create plans to guide the future behavior of the agent. The opportunism is in the acquisition of high-level objectives and in the modi cation of the predicted activity when something doesn't happen as expected. A control mechanism is responsible for the translation of plans of objectives to concrete activities, considering resource-boundedness. To do so, all the activity in the agent (including control) is explicitly scheduled, but allowing the necessary exibility to make changes in the face of contingencies that are expected in dynamic environments. Experimental work is also presented.

Ontology Requirements Specification

The goal of the ontology requirements specification activity is to state why the ontology is being built, what its intended uses are, who the end users are, and which requirements the ontology should fulfill. This chapter presents detailed methodological guidelines for specifying ontology requirements efficiently. These guidelines will help ontology engineers to capture ontology requirements and produce the ontology requirements specification document (ORSD). The ORSD will play a key role during the ontology development process because it facilitates, among other activities, (1) the search and reuse of existing knowledge resources with the aim of reengineering them into ontologies, (2) the search and reuse of ontological resources (ontologies, ontology modules, ontology statements as well as ontology design patterns), and (3) the verification of the ontology along the ontology development.

Emission inventories and modeling requirements for the development of air quality plans. Application to Madrid (Spain)

Modeling is an essential tool for the development of atmospheric emission abatement measures and air quality plans. Most often these plans are related to urban environments with high emission density and population exposure. However, air quality modeling in urban areas is a rather challenging task. As environmental standards become more stringent (e.g. European Directive 2008/50/EC), more reliable and sophisticated modeling tools are needed to simulate measures and plans that may effectively tackle air quality exceedances, common in large urban areas across Europe, particularly for NO2. This also implies that emission inventories must satisfy a number of conditions such as consistency across the spatial scales involved in the analysis, consistency with the emission inventories used for regulatory purposes and versatility to match the requirements of different air quality and emission projection models. This study reports the modeling activities carried out in Madrid (Spain) highlighting the atmospheric emission inventory development and preparation as an illustrative example of the combination of models and data needed to develop a consistent air quality plan at urban level. These included a series of source apportionment studies to define contributions from the international, national, regional and local sources in order to understand to what extent local authorities can enforce meaningful abatement measures. Moreover, source apportionment studies were conducted in order to define contributions from different sectors and to understand the maximum feasible air quality improvement that can be achieved by reducing emissions from those sectors, thus targeting emission reduction policies to the most relevant activities. Finally, an emission scenario reflecting the effect of such policies was developed and the associated air quality was modeled.

Adding Usability Mechanisms into Agile Requirements: Tool Support with U-Kunagi

The growing interest for integrating agile methodologies and usability has brought various challenges to practitioners. This research focuses on a specific part of these challenges that is related to the integration of usability mechanisms (features such as cancel, undo, warning, etc.) into agile requirements, usually written in the form of user stories. For this aim, a framework has been developed, conformed first by a well-defined modeling language that aims to formalize previous empirical research in the field, models of the impact of usability mechanisms into user stories, and a tool to help practitioners applying them to user stories. Results show that the use of this framework helps agile developers to think about usability from the beginning of the development process, without needing to be an expert in the subject. Our proposal can therefore complement other usability practices to improve the quality of use of software developed using agile methodologies.

Mandate M 376: new software accessibility requirements

Software needs to be accessible for persons with disabilities and there are several guidelines to assist developers in building more accessible software. Regulation activities are beginning to make the accessibility of software a mandatory requirement in some countries. One such activity is the European Mandate M 376, which will result in a European standard (EN 301 549) defining functional accessibility requirements for information and communication technology products and services. This paper provides an overview of Mandate M 376 and EN 301 549, and describes the requirements for software accessibility defined in EN 301 549, according to a feature-based approach

Application of knowledge engineering acquisition techniques to requirements capture: a case study

In this paper we want to point out, by means of a case study, the importance of incorporating some knowledge engineering techniques to the processes of software engineering. Precisely, we are referring to the knowledge eduction techniques. We know the difficulty of requirements acquisition and its importance to minimise the risks of a software project, both in the development phase and in the maintenance phase. To capture the functional requirements use cases are generally used. However, as we will show in this paper, this technique is insufficient when the problem domain knowledge is only in the "experts? mind". In this situation, the combination of the use case with eduction techniques, in every development phase, will let us to discover the correct requirements.

Mandate M 376: new software accessibility requirements

Software needs to be accessible for persons with disabilities and there are several guidelines to assist developers in building more accessible software. Regulation activities are beginning to make the accessibility of software a mandatory requirement in some countries. One such activity is the European Mandate M 376, which will result in a European standard (EN 301 549) defining functional accessibility requirements for information and communication technology products and services. This paper provides an overview of Mandate M 376 and EN 301 549, and describes the requirements for software accessibility defined in EN 301 549, according to a feature-based approach.

Storage requirements for PV power ramp-rate control

Short-term variability in the power generated by large grid-connected photovoltaic (PV) plants can negatively affect power quality and the network reliability. New grid-codes require combining the PV generator with some form of energy storage technology in order to reduce short-term PV power fluctuation. This paper proposes an effective method in order to calculate, for any PV plant size and maximum allowable ramp-rate, the maximum power and the minimum energy storage requirements alike. The general validity of this method is corroborated with extensive simulation exercises performed with real 5-s one year data of 500 kW inverters at the 38.5 MW Amaraleja (Portugal) PV plant and two other PV plants located in Navarra (Spain), at a distance of more than 660 km from Amaraleja.