An Inexpensive Method for Kinematic Calibration of a Parallel Robot by Using One Hand-Held Camera as Main Sensor

This paper presents a novel method for the calibration of a parallel robot, which allows a more accurate configuration instead of a configuration based on nominal parameters. It is used, as the main sensor with one camera installed in the robot hand that determines the relative position of the robot with respect to a spherical object fixed in the working area of the robot. The positions of the end effector are related to the incremental positions of resolvers of the robot motors. A kinematic model of the robot is used to find a new group of parameters, which minimizes errors in the kinematic equations. Additionally, properties of the spherical object and intrinsic camera parameters are utilized to model the projection of the object in the image and thereby improve spatial measurements. Finally, several working tests, static and tracking tests are executed in order to verify how the robotic system behaviour improves by using calibrated parameters against nominal parameters. In order to emphasize that, this proposed new method uses neither external nor expensive sensor. That is why new robots are useful in teaching and research activities.

Use of DFOT Heat Pulse Method ForWetting Pattern Determination in Drip Irrigation Emitters

Although there are numerous accurate measuring methods to determine soil moisture content in a spot, until very recently there were no precise in situ and in real time methods that were able to measure soil moisture content along a line. By means of the Distributed Fiber Optic Temperature Measurement method or DFOT, the temperature in 0.12 m intervals and long distances (up to 10,000 m) with a high time frequency and an accuracy of +0.2º C is determined. The principle of temperature measurement along a fiber optic cable is based on the thermal sensitivity of the relative intensities of backscattered photons that arise from collisions with electrons in the core of the glass fiber. A laser pulse, generated by the DTS unit, traversing a fiber optic cable will result in backscatter at two frequencies. The DTS quantifies the intensity of these backscattered photons and elapsed time between the pulse and the observed returned light. The intensity of one of the frequencies is strongly dependent on the temperature at the point where the scattering process occurred. The computed temperature is attributed to the position along the cable from which the light was reflected, computed from the time of travel for the light.

Robustness Analysis of Eigenstructure Assignment Controllers on Rigid-Flexible Satellites

Flexible spacecraft with attached solar panels may exhibit undesired vibrations and structural deformations. These types of vehicles show an intrinsic coupling of the elements of the structure. The attitude maneuvers performed by flexible spacecraft may cause non-desired deflections of attached flexible elements. Any attitude and orbit control system generally solves these problems using filters that are designed to attenuate the relative deflections of flexible appendages. In this paper, we propose a method for designing attitude static controllers using an eigenstructure assignment (EA) method. A set of requirements were specified from our understanding of the system modes in an open loop. Exhaustive theoretical and numerical simulations were performed on special cases to verify the controller design procedure. In the design of the controller, we considered all of the aspects that relate to the eigenstructure assignment. The primary objective of this paper is to demonstrate the feasibility of obtaining a high degree of decoupling for some selected modes via the application of an EA method. Finally a robustness analysis is perform to the system together with the designed controller by means of a mu-analysis

A static heap analysis for shape and connectivity: Unified memory analysis: The base framework

Modeling the evolution of the state of program memory during program execution is critical to many parallehzation techniques. Current memory analysis techniques either provide very accurate information but run prohibitively slowly or produce very conservative results. An approach based on abstract interpretation is presented for analyzing programs at compile time, which can accurately determine many important program properties such as aliasing, logical data structures and shape. These properties are known to be critical for transforming a single threaded program into a versión that can be run on múltiple execution units in parallel. The analysis is shown to be of polynomial complexity in the size of the memory heap. Experimental results for benchmarks in the Jolden suite are given. These results show that in practice the analysis method is efflcient and is capable of accurately determining shape information in programs that créate and manipúlate complex data structures.

Combining static analysis and profiling for estimating execution times in logic programs

Effective static analyses have been proposed which allow inferring functions which bound the number of resolutions or reductions. These have the advantage of being independent from the platform on which the programs are executed and such bounds have been shown useful in a number of applications, such as granularity control in parallel execution. On the other hand, in certain distributed computation scenarios where different platforms come into play, with each platform having different capabilities, it is more interesting to express costs in metrics that include the characteristics of the platform. In particular, it is specially interesting to be able to infer upper and lower bounds on actual execution time. With this objective in mind, we propose a method which allows inferring upper and lower bounds on the execution times of procedures of a program in a given execution platform. The approach combines compile-time cost bounds analysis with a one-time profiling of the platform in order to determine the values of certain constants for that platform. These constants calibrate a cost model which from then on is able to compute statically time bound functions for procedures and to predict with a significant degree of accuracy the execution times of such procedures in the given platform. The approach has been implemented and integrated in the CiaoPP system.

A simulation method to estimate closing forces in car-sealing rubber elements

The door-closing process can reinforce the impression of a solid, rock-proof, car body or of a rather cheap, flimsy vehicle. As there are no real prototypes during rubber profile bidding-out stages, engineers need to carry out non-linear numerical simulations that involve complex phenomena as well as static and dynamic loads for several profile candidates. This paper presents a structured virtual design tool based on FEM, including constitutive laws and incompressibility constraints allowing to predict more realistically the final closing forces and even to estimate sealing overpressure as an additional guarantee of noise insulation. Comparisons with results of physical tests are performed.

Dominance Measuring Method Performance under Incomplete Information about Weights.

In multi-attribute utility theory, it is often not easy to elicit precise values for the scaling weights representing the relative importance of criteria. A very widespread approach is to gather incomplete information. A recent approach for dealing with such situations is to use information about each alternative?s intensity of dominance, known as dominance measuring methods. Different dominancemeasuring methods have been proposed, and simulation studies have been carried out to compare these methods with each other and with other approaches but only when ordinal information about weights is available. In this paper, we useMonte Carlo simulation techniques to analyse the performance of and adapt such methods to deal with weight intervals, weights fitting independent normal probability distributions orweights represented by fuzzy numbers.Moreover, dominance measuringmethod performance is also compared with a widely used methodology dealing with incomplete information on weights, the stochastic multicriteria acceptability analysis (SMAA). SMAA is based on exploring the weight space to describe the evaluations that would make each alternative the preferred one.

Shaking table tests of structures with hysteretic dampers: experimental results vs. prediction using non-linear static methods

The use of seismic hysteretic dampers for passive control is increasing exponentially in recent years for both new and existing buildings. In order to utilize hysteretic dampers within a structural system, it is of paramount importance to have simplified design procedures based upon knowledge gained from theoretical studies and validated with experimental results. Non-linear Static Procedures (NSPs) are presented as an alternative to the force-based methods more common nowadays. The application of NSPs to conventional structures has been well established; yet there is a lack of experimental information on how NSPs apply to systems with hysteretic dampers. In this research, several shaking table tests were conducted on two single bay and single story 1:2 scale structures with and without hysteretic dampers. The maximum response of the structure with dampers in terms of lateral displacement and base shear obtained from the tests was compared with the prediction provided by three well-known NSPs: (1) the improved version of the Capacity Spectrum Method (CSM) from FEMA 440; (2) the improved version of the Displacement Coefficient Method (DCM) from FEMA 440; and (3) the N2 Method implemented in Eurocode 8. In general, the improved version of the DCM and N2 methods are found to provide acceptable accuracy in prediction, but the CSM tends to underestimate the response.

A new method for the identification of old-growth trees in National Forest Inventories: Application to Pinus halepensis Mill. stands in Spain

Old-growth trees play a very important role in the maintenance of biodiversity in forests. However, no clear definition is yet available to help identify them since tree age is usually not recorded in National Forest Inventories. To develop and test a new method to identify old-growth trees using a species-specific threshold for tree diameter in National Forest Inventories. Different nonlinear mixed models for diameter ? age were generated using data from the Spanish Forest Inventory in order to identify the most appropriate one for Aleppo pine in its South-western distribution area. The asymptote of the optimal model indicates the threshold diameter for defining an old-growth tree. Additionally, five site index curves were examined to analyze the influence of site quality on these models.

Novel lateral moving tracking optics with the SMS design method

Lateral moving optics along straight path has already been studied in the past. However, their relative small angular range can be a limitation to potential applications. In this work, a new design concept of SMS moving optics is developed, in which the movement is no longer lateral but follows a curved trajectory, which is calculated in the design process. We have chosen an afocal system, which aim to direct the parallel rays of large incident angles to parallel output rays, and we have obtained that the RMS of the divergence angle of the output rays remains below 1 degree within a input angular range of ±45 output. Potential applications of this beam-steering device are: skylights to provide steerable natural illumination, building integrated CPV systems, and steerable LED illumination.

A new method to analyse the perception of size

In living bodies, the correct perceptual representation of size constancy requires that an object's size appear the same when it changes its location with respect to the observer. At the same time, it is necessary that objects at different locations appear to be the same size if they are. In order to do that, the perceptual system must recover from the stimuli impinging on the individual, from the light falling on the retina, a representation of the relative sizes of objects in the environment. Moreover, at the same time, image perception is related to another type of phenomena. It corresponds to the well known perceptual illusions. To analyze this facts, we propose a system based on a particular arrays of receptive points composed by optical fibers and dummy fibers. The structure is based on the first layers of the mammalians primary visual cortex. At that part of the brain, the neurons located at certain columns, respond to particular directions. This orientation changes in a systematic way as one moves across the cortical surface. In our case, the signals from the above-mentioned array are analyzed and information concerning orientation and size of a particular line is obtained. With this system, the Muelle-Lyer illusion has been studied and some rules to interpret why equal length objects give rise to different interpretations are presented.

Análisis de micromovilidad en vástagos femorales mediante ensayo dinámico de oscilaciones libres

La artroplastia de cadera se considera uno de los mayores avances quirúrgicos de la Medicina. La aplicación de esta técnica de Traumatología se ha incrementado notablemente en los últimos anos, a causa principalmente del progresivo incremento de la esperanza de vida. En efecto, con la edad aumentan los problemas de artrosis y osteoporosis, enfermedades típicas de las articulaciones y de los huesos que requieren en muchos casos la sustitución protésica total o parcial de la articulación. El buen comportamiento funcional de una prótesis depende en gran medida de la estabilidad primaria, es decir, el correcto anclaje de la prótesis en el momento de su implantación. Las prótesis no cementadas basan su éxito a largo plazo en la osteointegración que tiene lugar entre el material protésico y el tejido óseo, y para lograrla es imprescindible conseguir unas buenas condiciones de estabilidad primaria. El aflojamiento aséptico es la principal causa de fallo de artroplastia total de cadera. Este es un fenómeno en el que, debido a complejas interacciones de factores mecánicos y biológicos, se producen movimientos relativos que comprometen la funcionalidad del implante. La minimización de los correspondientes danos depende en gran medida de la detección precoz del aflojamiento. Para lograr la detección temprana del aflojamiento aséptico del vástago femoral se han ensayado diferentes técnicas, tanto in vivo como in vitro: análisis numéricos y técnicas experimentales basadas en sensores de movimientos provocados por cargas transmitidas natural o artificialmente, tales como impactos o vibraciones de distintas frecuencias. Los montajes y procedimientos aplicados son heterogéneos y, en muchas ocasiones, complejos y costosos, no existiendo acuerdo sobre una técnica simple y eficaz de aplicación general. Asimismo, en la normativa vigente que regula las condiciones que debe cumplir una prótesis previamente a su comercialización, no hay ningún apartado referido específicamente a la evaluación de la bondad del diseño del vástago femoral con respecto a la estabilidad primaria. El objetivo de esta tesis es desarrollar una metodología para el análisis, in vitro, de la estabilidad de un vástago femoral implantado, a fin de poder evaluar las técnicas de implantación y los diferentes diseños de prótesis previamente a su oferta en el mercado. Además se plantea como requisito fundamental que el método desarrollado sea sencillo, reversible, repetible, no destructivo, con control riguroso de parámetros (condiciones de contorno de cargas y desplazamientos) y con un sistema de registro e interpretación de resultados rápido, fiable y asequible. Como paso previo, se ha realizado un análisis cualitativo del problema de contacto en la interfaz hueso-vástago aplicando una técnica optomecánica del campo continuo (fotoelasticidad). Para ello se han fabricado tres modelos en 2D del conjunto hueso-vástago, simulando tres tipos de contactos en la interfaz: contacto sin adherencia y con holgura, contacto sin adherencia y sin holgura, y contacto con adherencia y homogéneo. Aplicando la misma carga a cada modelo, y empleando la técnica de congelación de tensiones, se han visualizado los correspondientes estados tensionales, siendo estos más severos en el modelo de unión sin adherencia, como cabía esperar. En todo caso, los resultados son ilustrativos de la complejidad del problema de contacto y confirman la conveniencia y necesidad de la vía experimental para el estudio del problema. Seguidamente se ha planteado un ensayo dinámico de oscilaciones libres con instrumentación de sensores resistivos tipo galga extensométrica. Las muestras de ensayo han sido huesos fémur en todas sus posibles variantes: modelos simplificados, hueso sintético normalizado y hueso de cadáver, seco y fresco. Se ha diseñado un sistema de empotramiento del extremo distal de la muestra (fémur) con control riguroso de las condiciones de anclaje. La oscilación libre de la muestra se ha obtenido mediante la liberación instantánea de una carga estética determinada y aplicada previamente, bien con una maquina de ensayo o bien por gravedad. Cada muestra se ha instrumentado con galgas extensométricas convencionales cuya señal se ha registrado con un equipo dinámico comercial. Se ha aplicado un procedimiento de tratamiento de señal para acotar, filtrar y presentar las respuestas de los sensores en el dominio del tiempo y de la frecuencia. La interpretación de resultados es de tipo comparativo: se aplica el ensayo a una muestra de fémur Intacto que se toma de referencia, y a continuación se repite el ensayo sobre la misma muestra con una prótesis implantada; la comparación de resultados permite establecer conclusiones inmediatas sobre los efectos de la implantación de la prótesis. La implantación ha sido realizada por un cirujano traumatólogo utilizando las mismas técnicas e instrumental empleadas en el quirófano durante la práctica clínica real, y se ha trabajado con tres vástagos femorales comerciales. Con los resultados en el dominio del tiempo y de la frecuencia de las distintas aplicaciones se han establecido conclusiones sobre los siguientes aspectos: Viabilidad de los distintos tipos de muestras sintéticas: modelos simplificados y fémur sintético normalizado. Repetibilidad, linealidad y reversibilidad del ensayo. Congruencia de resultados con los valores teóricos deducidos de la teoría de oscilaciones libres de barras. Efectos de la implantación de tallos femorales en la amplitud de las oscilaciones, amortiguamiento y frecuencias de oscilación. Detección de armónicos asociados a la micromovilidad. La metodología se ha demostrado apta para ser incorporada a la normativa de prótesis, es de aplicación universal y abre vías para el análisis de la detección y caracterización de la micromovilidad de una prótesis frente a las cargas de servicio. ABSTRACT Total hip arthroplasty is considered as one of the greatest surgical advances in medicine. The application of this technique on Traumatology has increased significantly in recent years, mainly due to the progressive increase in life expectancy. In fact, advanced age increases osteoarthritis and osteoporosis problems, which are typical diseases of joints and bones, and in many cases require full or partial prosthetic replacement on the joint. Right functional behavior of prosthesis is highly dependent on the primary stability; this means it depends on the correct anchoring of the prosthesis at the time of implantation. Uncemented prosthesis base their long-term success on the quality of osseointegration that takes place between the prosthetic material and bone tissue, and to achieve this good primary stability conditions is mandatory. Aseptic loosening is the main cause of failure in total hip arthroplasty. This is a phenomenon in which relative movements occur, due to complex interactions of mechanical and biological factors, and these micromovements put the implant functionality at risk. To minimize possible damage, it greatly depends on the early detection of loosening. For this purpose, various techniques have been tested both in vivo and in vitro: numerical analysis and experimental techniques based on sensors for movements caused by naturally or artificially transmitted loads, such as impacts or vibrations at different frequencies. The assemblies and methods applied are heterogeneous and, in many cases, they are complex and expensive, with no agreement on the use of a simple and effective technique for general purposes. Likewise, in current regulations for governing the conditions to be fulfilled by the prosthesis before going to market, there is no specific section related to the evaluation of the femoral stem design in relation to primary stability. The aim of this thesis is to develop a in vitro methodology for analyzing the stability of an implanted femoral stem, in order to assess the implantation techniques and the different prosthesis designs prior to its offer in the market. We also propose as a fundamental requirement that the developed testing method should be simple, reversible, repeatable, non-destructive, with close monitoring of parameters (boundary conditions of loads and displacements) and with the availability of a register system to record and interpret results in a fast, reliable and affordable manner. As a preliminary step, we have performed a qualitative analysis of the contact problems in the bone-stem interface, through the application of a continuous field optomechanical technique (photoelasticity). For this proposal three 2D models of bone–stem set, has been built simulating three interface contact types: loosened an unbounded contact, unbounded and fixed contact, and bounded homogeneous contact. By means of applying the same load to each model, and using the stress freezing technique, it has displayed the corresponding stress states, being more severe as expected, in the unbounded union model. In any case, the results clearly show the complexity of the interface contact problem, and they confirm the need for experimental studies about this problem. Afterward a free oscillation dynamic test has been done using resistive strain gauge sensors. Test samples have been femur bones in all possible variants: simplified models, standardized synthetic bone, and dry and cool cadaveric bones. An embedding system at the distal end of the sample with strong control of the anchoring conditions has been designed. The free oscillation of the sample has been obtained by the instantaneous release of a static load, which was previously determined and applied to the sample through a testing machine or using the gravity force. Each sample was equipped with conventional strain gauges whose signal is registered with a marketed dynamic equipment. Then, it has applied a signal processing procedure to delimit, filter and present the time and frequency response signals from the sensors. Results are interpreted by comparing different trials: the test is applied to an intact femur sample which is taken as a reference, and then this test is repeated over the same sample with an implanted prosthesis. From comparison between results, immediate conclusions about the effects of the implantation of the prosthesis can be obtained. It must be said that the implementation has been made by an expert orthopedic surgeon using the same techniques and instruments as those used in clinical surgery. He has worked with three commercial femoral stems. From the results obtained in the time and frequency domains for the different applications the following conclusions have been established: Feasibility of the different types of synthetic samples: simplified models and standardized synthetic femur. Repeatability, linearity and reversibility of the testing method. Consistency of results with theoretical values deduced from the bars free oscillations theory. Effects of introduction of femoral stems in the amplitude, damping and frequencies of oscillations Detection of micromobility associated harmonics. This methodology has been proved suitable to be included in the standardization process of arthroplasty prosthesis, it is universally applicable and it allows establishing new methods for the analysis, detection and characterization of prosthesis micromobility due to functional loads.

Simplified longitudinal seismic analysis of buried tunnels

In this paper an analytical static approach to analyse buried tunnels under seismic surface waves (Rayleigh and Love waves), propagating parallel to the tunnels axis, is provided. In the proposed method, the tunnel is considered as a beam on elastic foundation by using a Winkler model to represent the subgrade reaction and the soil-structure interaction. The seismic load is imposed by giving at the base of the soil springs a determined configuration corresponding to the free-field motion. From the solution of the differential governing equations of the problem, results are obtained in form of relative displacements between points of tunnel, and therefore the seismic bending moments and shearing forces, acting on the tunnel cross section, can be computed.

Analysis of the static and dynamic behaviour of hydraulic fills

En la actualidad existe un gran conocimiento en la caracterización de rellenos hidráulicos, tanto en su caracterización estática, como dinámica. Sin embargo, son escasos en la literatura estudios más generales y globales de estos materiales, muy relacionados con sus usos y principales problemáticas en obras portuarias y mineras. Los procedimientos semi‐empíricos para la evaluación del efecto silo en las celdas de cajones portuarios, así como para el potencial de licuefacción de estos suelos durantes cargas instantáneas y terremotos, se basan en estudios donde la influencia de los parámetros que los rigen no se conocen en gran medida, dando lugar a resultados con considerable dispersión. Este es el caso, por ejemplo, de los daños notificados por el grupo de investigación del Puerto de Barcelona, la rotura de los cajones portuarios en el Puerto de Barcelona en 2007. Por estos motivos y otros, se ha decidido desarrollar un análisis para la evaluación de estos problemas mediante la propuesta de una metodología teórico‐numérica y empírica. El enfoque teórico‐numérico desarrollado en el presente estudio se centra en la determinación del marco teórico y las herramientas numéricas capaces de solventar los retos que presentan estos problemas. La complejidad del problema procede de varios aspectos fundamentales: el comportamiento no lineal de los suelos poco confinados o flojos en procesos de consolidación por preso propio; su alto potencial de licuefacción; la caracterización hidromecánica de los contactos entre estructuras y suelo (camino preferencial para el flujo de agua y consolidación lateral); el punto de partida de los problemas con un estado de tensiones efectivas prácticamente nulo. En cuanto al enfoque experimental, se ha propuesto una metodología de laboratorio muy sencilla para la caracterización hidromecánica del suelo y las interfaces, sin la necesidad de usar complejos aparatos de laboratorio o procedimientos excesivamente complicados. Este trabajo incluye por tanto un breve repaso a los aspectos relacionados con la ejecución de los rellenos hidráulicos, sus usos principales y los fenómenos relacionados, con el fin de establecer un punto de partida para el presente estudio. Este repaso abarca desde la evolución de las ecuaciones de consolidación tradicionales (Terzaghi, 1943), (Gibson, English & Hussey, 1967) y las metodologías de cálculo (Townsend & McVay, 1990) (Fredlund, Donaldson and Gitirana, 2009) hasta las contribuciones en relación al efecto silo (Ranssen, 1985) (Ravenet, 1977) y sobre el fenómeno de la licuefacción (Casagrande, 1936) (Castro, 1969) (Been & Jefferies, 1985) (Pastor & Zienkiewicz, 1986). Con motivo de este estudio se ha desarrollado exclusivamente un código basado en el método de los elementos finitos (MEF) empleando el programa MATLAB. Para ello, se ha esablecido un marco teórico (Biot, 1941) (Zienkiewicz & Shiomi, 1984) (Segura & Caron, 2004) y numérico (Zienkiewicz & Taylor, 1989) (Huerta & Rodríguez, 1992) (Segura & Carol, 2008) para resolver problemas de consolidación multidimensional con condiciones de contorno friccionales, y los correspondientes modelos constitutivos (Pastor & Zienkiewicz, 1986) (Fiu & Liu, 2011). Asimismo, se ha desarrollado una metodología experimental a través de una serie de ensayos de laboratorio para la calibración de los modelos constitutivos y de la caracterización de parámetros índice y de flujo (Castro, 1969) (Bahda 1997) (Been & Jefferies, 2006). Para ello se han empleado arenas de Hostun como material (relleno hidráulico) de referencia. Como principal aportación se incluyen una serie de nuevos ensayos de corte directo para la caracterización hidromecánica de la interfaz suelo – estructura de hormigón, para diferentes tipos de encofrados y rugosidades. Finalmente, se han diseñado una serie de algoritmos específicos para la resolución del set de ecuaciones diferenciales de gobierno que definen este problema. Estos algoritmos son de gran importancia en este problema para tratar el procesamiento transitorio de la consolidación de los rellenos hidráulicos, y de otros efectos relacionados con su implementación en celdas de cajones, como el efecto silo y la licuefacciones autoinducida. Para ello, se ha establecido un modelo 2D axisimétrico, con formulación acoplada u‐p para elementos continuos y elementos interfaz (de espesor cero), que tratan de simular las condiciones de estos rellenos hidráulicos cuando se colocan en las celdas portuarias. Este caso de estudio hace referencia clara a materiales granulares en estado inicial muy suelto y con escasas tensiones efectivas, es decir, con prácticamente todas las sobrepresiones ocasionadas por el proceso de autoconsolidación (por peso propio). Por todo ello se requiere de algoritmos numéricos específicos, así como de modelos constitutivos particulares, para los elementos del continuo y para los elementos interfaz. En el caso de la simulación de diferentes procedimientos de puesta en obra de los rellenos se ha requerido la modificacion de los algoritmos empleados para poder así representar numéricamente la puesta en obra de estos materiales, además de poder realizar una comparativa de los resultados para los distintos procedimientos. La constante actualización de los parámetros del suelo, hace también de este algoritmo una potente herramienta que permite establecer un interesante juego de perfiles de variables, tales como la densidad, el índice de huecos, la fracción de sólidos, el exceso de presiones, y tensiones y deformaciones. En definitiva, el modelo otorga un mejor entendimiento del efecto silo, término comúnmente usado para definir el fenómeno transitorio del gradiente de presiones laterales en las estructuras de contención en forma de silo. Finalmente se incluyen una serie de comparativas entre los resultados del modelo y de diferentes estudios de la literatura técnica, tanto para el fenómeno de las consolidaciones por preso propio (Fredlund, Donaldson & Gitirana, 2009) como para el estudio del efecto silo (Puertos del Estado, 2006, EuroCódigo (2006), Japan Tech, Stands. (2009), etc.). Para concluir, se propone el diseño de un prototipo de columna de decantación con paredes friccionales, como principal propuesta de futura línea de investigación. Wide research is nowadays available on the characterization of hydraulic fills in terms of either static or dynamic behavior. However, reported comprehensive analyses of these soils when meant for port or mining works are scarce. Moreover, the semi‐empirical procedures for assessing the silo effect on cells in floating caissons, and the liquefaction potential of these soils during sudden loads or earthquakes are based on studies where the underlying influence parameters are not well known, yielding results with significant scatter. This is the case, for instance, of hazards reported by the Barcelona Liquefaction working group, with the failure of harbor walls in 2007. By virtue of this, a complex approach has been undertaken to evaluate the problem by a proposal of numerical and laboratory methodology. Within a theoretical and numerical scope, the study is focused on the numerical tools capable to face the different challenges of this problem. The complexity is manifold; the highly non‐linear behavior of consolidating soft soils; their potentially liquefactable nature, the significance of the hydromechanics of the soil‐structure contact, the discontinuities as preferential paths for water flow, setting “negligible” effective stresses as initial conditions. Within an experimental scope, a straightforward laboratory methodology is introduced for the hydromechanical characterization of the soil and the interface without the need of complex laboratory devices or cumbersome procedures. Therefore, this study includes a brief overview of the hydraulic filling execution, main uses (land reclamation, filled cells, tailing dams, etc.) and the underlying phenomena (self‐weight consolidation, silo effect, liquefaction, etc.). It comprises from the evolution of the traditional consolidation equations (Terzaghi, 1943), (Gibson, English, & Hussey, 1967) and solving methodologies (Townsend & McVay, 1990) (Fredlund, Donaldson and Gitirana, 2009) to the contributions in terms of silo effect (Ranssen, 1895) (Ravenet, 1977) and liquefaction phenomena (Casagrande, 1936) (Castro, 1969) (Been & Jefferies, 1985) (Pastor & Zienkiewicz, 1986). The novelty of the study lies on the development of a Finite Element Method (FEM) code, exclusively formulated for this problem. Subsequently, a theoretical (Biot, 1941) (Zienkiewicz and Shiomi, 1984) (Segura and Carol, 2004) and numerical approach (Zienkiewicz and Taylor, 1989) (Huerta, A. & Rodriguez, A., 1992) (Segura, J.M. & Carol, I., 2008) is introduced for multidimensional consolidation problems with frictional contacts and the corresponding constitutive models (Pastor & Zienkiewicz, 1986) (Fu & Liu, 2011). An experimental methodology is presented for the laboratory test and material characterization (Castro 1969) (Bahda 1997) (Been & Jefferies 2006) using Hostun sands as reference hydraulic fill. A series of singular interaction shear tests for the interface calibration is included. Finally, a specific model algorithm for the solution of the set of differential equations governing the problem is presented. The process of consolidation and settlements involves a comprehensive simulation of the transient process of decantation and the build‐up of the silo effect in cells and certain phenomena related to self‐compaction and liquefaction. For this, an implementation of a 2D axi‐syimmetric coupled model with continuum and interface elements, aimed at simulating conditions and self‐weight consolidation of hydraulic fills once placed into floating caisson cells or close to retaining structures. This basically concerns a loose granular soil with a negligible initial effective stress level at the onset of the process. The implementation requires a specific numerical algorithm as well as specific constitutive models for both the continuum and the interface elements. The simulation of implementation procedures for the fills has required the modification of the algorithm so that a numerical representation of these procedures is carried out. A comparison of the results for the different procedures is interesting for the global analysis. Furthermore, the continuous updating of the model provides an insightful logging of variable profiles such as density, void ratio and solid fraction profiles, total and excess pore pressure, stresses and strains. This will lead to a better understanding of complex phenomena such as the transient gradient in lateral pressures due to silo effect in saturated soils. Interesting model and literature comparisons for the self‐weight consolidation (Fredlund, Donaldson, & Gitirana, 2009) and the silo effect results (Puertos del Estado (2006), EuroCode (2006), Japan Tech, Stands. (2009)). This study closes with the design of a decantation column prototype with frictional walls as the main future line of research.

Identification of the method to quantify soluble fibre and the effect of the source of fibre on the ileal and faecal digestibility of soluble and insoluble fibre in rabbits = Identificación del método para cuantificar la fibra soluble y el efecto de la fuente de fibra en la digestibilidad ileal y fecal de la fibra soluble e insoluble en conejos

La presente tesis constituye un avance en el estudio de los métodos para cuantificar la fibra soluble y los efectos de las fracciones de fibra y las fuentes de fibra sobre la digestión de las diferentes fracciones de fibra (soluble e insoluble) en el conejo. Hay un efecto positivo de la fibra soluble sobre la salud intestinal de los conejos y, por ende, una reducción de la mortalidad en animales destetados. Pese a esto, no está claro si estos efectos se deben específicamente a la fracción soluble. Por lo que los objetivos generales de esta tesis fueron: 1) comparar diferentes metodologías químicas e in vitro para cuantificar la fibra soluble y estudiar las posibles interferencias en la cuantificación de la fibra soluble por las mucinas, y viceversa, 2) determinar los efectos de la fibra, el lugar de fermentación, el método para valorar la fibra soluble e insoluble, y la corrección de la fibra soluble por el contenido intestinal de mucinas sobre la digestibilidad de las distintas fracciones de la fibra y 3) evaluar los efectos individuales de las fracciones soluble e insoluble de la fibra de pulpa de remolacha y de manzana, sobre la digestibilidad de la fibra soluble e insoluble y los parámetros digestivos. Para ello se llevaron a cabo 4 estudios. En el primer estudio se compararon diferentes metodologías químicas e in vitro para valorar la fibra soluble de diferentes alimentos y se estudió la posible interferencia en la determinación de la fibra soluble y mucinas. Para ello se utilizaron seis ingredientes (pulpa de remolacha, pectinas de pulpa de remolacha, pulpa de remolacha lavada, paja de cereal, cascarilla de girasol y lignocelulosa) y siete piensos de conejos con diferentes niveles de fibra soluble. En un primer experimento se analizó la fibra dietética total (FDT), la fibra dietética insoluble (FDI), la fibra dietética soluble (FDS), la fibra neutro detergente corregida por cenizas y proteínas (aFNDmo-pb), y la digestibilidad in vitro 2 pasos pepsina/pancreatina (residuo corregido por cenizas y proteína, ivMSi2) de los ingredientes y piensos. Además la fibra soluble se calculó mediante la diferencia entre FDT-FDI (FDSFDI), FDT- ivMSi2 (FDSivMSi2), y FDT - aFNDmo-pb (FDSaFNDmo-pb). Cuando la fibra soluble se determinó directamente como FDS o se calculó como FDT-FDI no se observaron diferencias (109 g/kg MS, en promedio). Sin embargo, cuando la fibra soluble se calculó como FDT - aFNDmo-pb su valor fue un 40% menor (153 g/kg MS. P < 0,05), mientras que la FDSFDI (124 g/kg MS) no fue diferente a ninguna de las otras metodologías. La correlación entre los tres métodos fue elevada (r > 0,96. P < 0,001. n = 13), pero disminuyó o incluso desapareció cuando la pulpa o las pectinas de la remolacha fueron excluidas del análisis. En un segundo experimento, se comparó el método ivDMi2 usando crisoles (método de referencia) con una modificación del mismo usando bolsas ANKOM digeridas individualmente o en colectivo para simplificar la determinación de la FDSivMSi2. La FDSivMSi2 no difirió entre los métodos comparados. En un tercer experimento, se analizó la posible interferencia entre la determinación de la fibra soluble y las mucinas intestinales. Se observó un contenido de FDT y de mucinas elevado en las muestras de pectinas de remolacha (994 y 709 g/kg MS), así como en el moco intestinal de conejo (571 y 739 g/kg MS) cuando se aplicó el método de mucinas por precipitación con etanol. Sin embargo, después de aplicar una pectinasa en el material precipitado, la cantidad de mucinas recuperadas en las muestras de pectinas de remolacha fue cercana a cero, mientras que en el moco intestinal fue similar a los resultados previos al uso de la enzima. Con los resultados de este ensayo se estimaron los carbohidratos de mucinas retenidos en los contenidos digestivos y se propuso una corrección para la determinación de la digestibilidad de la FDT y fibra soluble. En conclusión, la contaminación de las mucinas de la digesta con fibra soluble se soluciona usando pectinasas. El segundo estudio se centró en estudiar: 1) el efecto del tipo de fibra, 2) el sitio de fermentación, 3) el método para cuantificar fibra y 4) la corrección por mucinas sobre la digestibilidad de la fibra. Para ello se formularon tres piensos con diferentes niveles de fibra soluble (FDT-aFNDmo-pb). Un pienso bajo en fibra soluble (LSF. 85 g/kg DM), un pienso medio en fibra soluble (MSF. 102 g/kg DM), y un pienso alto en fibra soluble (HSF. 145 g/kg DM). Estos piensos se obtuvieron reemplazando un 50% del heno del alfalfa en el pienso MSF por una mezcla de pulpa de manzana y remolacha (HSF) o por una mezcla de cascarilla de avena y proteína de soja (LSF). Se utilizaron 30 conejas canuladas para determinar la digestibilidad ileal y fecal. La digestibilidad cecal se calculó mediante diferencia entre la digestibilidad fecal e ileal. La fibra insoluble se determinó como aFNDmo-pb, IDF, e ivMSi2, mientras que la fibra soluble se calculó como FDSFDI, FDSaFNDmo-pb, y FDSivMSi2. La digestibilidad de la FDT y la fibra soluble se corrigieron por las mucinas. La concentración de mucinas en la digesta ileal y fecal, aumento desde el grupo LSF hasta el grupo con el pienso HSF (P < 0,01). La corrección por mucinas aumentó las digestibilidades de la FDT y la fibra soluble a nivel ileal, mientras que a nivel cecal las redujo. (P < 0.01). El coeficiente de digestibilidad ileal de FDT aumentó desde el grupo LSF al grupo HSF (0,12 vs. 0,281. P < 0,01), sin diferencias en el coeficiente de digestibilidad cecal (0,264), por lo que la tendencia a nivel fecal entre los grupos se mantuvo. El coeficiente de digestibilidad ileal de la fibra insoluble aumento desde el grupo con el pienso LSF al grupo con el pienso HSF (0,113 vs. 0,210. P < 0,01), sin diferencias a nivel cecal (0,139) y sin efecto del método usado, resultando en una digestibilidad elevada a nivel fecal, con tendencias similares a las observadas a nivel ileal. El coeficiente de digestibilidad de la FND fue elevada en comparación con la FDI o la ivMSi2 (P > 0.01). El coeficiente de la digestibilidad ileal de la fibra soluble fue mayor en el grupo LSF respecto al grupo LSF (0,436 vs. 0,145. P < 0,01) y el método no afectó a esta determinación. El coeficiente de la digestibilidad cecal de la fibra soluble se redujo desde el grupo LSF hasta el grupo HSF (0,721 vs. 0,492. P < 0,05). El valor más bajo de digestibilidad cecal y fecal de fibra soluble fue medido con el método FDSaFNDmo-pb (P < 0,01). Se observó una alta correlación entre las digestibilidades de la fibra soluble determinada como FDSFDI, FDSaFNDmo-pb, y FDSivMSi2, por lo tanto la información proporcionada por una u otra metodología fueron similares. Sin embargo, cuando se compararon con efectos fisiológicos (producción de mucinas y peso del ciego y pH del ciego de un trabajo previo), la FDSaFNDmo-pb globalmente mostró estar mejor correlacionado con estos parámetros fisiológicos. En conclusión, la corrección por mucinas es necesaria para determinar la digestibilidad ileal de la FDT y fibra soluble, mientras que la elección de uno u otro método es menos relevante. La inclusión de pulpa de manzana y remolacha incrementa la cantidad de FDT que desaparece antes de llegar al ciego. En el tercer estudio se estudió el efecto de la fracción fibrosa soluble e insoluble de la pulpa de remolacha y el método de cuantificación de la fibra soluble e insoluble sobre la digestibilidad de la fibra y algunos parámetros digestivos. Para ello se formularon cuatro piensos con niveles similares de fibra insoluble (315g aFNDmo-pb/kg MS) y proteína (167 g/kg MS). El pienso control contuvo el nivel más bajo de fibra soluble (30,3 g/kg, con cascarilla de girasol y paja como fuente de fibra). Un segundo pienso se obtuvo mediante la sustitución de 60 g de almidón/kg del pienso control por pectinas de remolacha (82,9 g fibra soluble/kg MS). Los otras dos piensos resultaron de la sustitución parcial de las fuentes de fibra del pienso control por la fracción insoluble de la pulpa de remolacha y la pulpa de remolacha entera (42.2 y 82.3 g fibra soluble/kg MS, respectivamente). Cincuenta y seis conejos en cebo (14/pienso), de 2,4  0.21 kg de peso, fueron usados para determinar la digestibilidad ileal y fecal de la FDT, FDI, aFNDmo-pb, FDSFDI, y FDSaFNDmo-pb. La concentración de mucinas en el íleon y heces se utilizaron para corregir la digestibilidad de la FDT y fibra soluble. También se midió el peso de diferentes segmentos del tracto digestivo y el pH del contenido digestivo. Los conejos alimentados con el pienso de fibra insoluble de pulpa de remolacha mostraron los consumos más bajos con respecto a los demás grupos (124 vs. 139 g/d, respectivamente. P < 0,05). El flujo de mucinas ileales fue más alto (P < 0.05) en el grupo alimentado con el pienso de pectinas de remolacha (9,0 g/d en promedio) que los del grupo control (4,79 g/d), mostrando los otros dos grupos valores intermedios, sin detectarse diferencias a nivel fecal. La digestibilidad ileal de la FDT (corregida por mucinas) y la fibra insoluble no se vieron afectadas por el tipo de pienso. El método usado para determinar la fibra insoluble afectó su digestibilidad ileal (0,123 para FDI vs. 0,108 para aFNDmo-pb. P < 0.01). De todas formas, los métodos no afectaron al cálculo de la fibra fermentada antes del ciego (4,9 g/d en promedio). Los conejos alimentados con el pienso de pulpa de remolacha y con el pienso con la fracción insoluble de la pulpa de remolacha mostraron las digestibilidades fecales más altas de la fibra insoluble (0,266 en promedio vs. 0,106 del grupo control), mientras que en los animales del pienso con pectinas esta digestibilidad fue un 47% mayor respecto al pienso control (P < 0,001). La digestibilidad fecal de la fibra insoluble fue un 20% más alta cuando se usó la FND en lugar de FDI para determinarla (P < 0.001). Esto hizo variar la cantidad de fibra insoluble fermentada a lo largo del tracto digestivo (9,5 ó 7,5 g/d cuando fue calculada como FDI o aFNDmo-pb, respectivamente. P < 0,001). Las digestibilidades ileales de la fibra soluble fueron positivas cuando los análisis de fibra soluble de los contenidos ileales fueron corregidos por mucinas, (P < 0,001) excepto para la digestibilidad ileal de la FDSIDF del grupo control. Una vez corregidas por mucinas, los conejos alimentados con los piensos que contuvieron la fracción soluble de la pulpa de remolacha (pienso de pectina y pulpa de remolacha) mostraron una mayor digestibilidad ileal de la fibra soluble, respecto al grupo control (0,483 vs. -0,010. P = 0.002), mientras que el grupo del pienso de fibra insoluble de pulpa de remolacha mostró un valor intermedio (0,274). La digestibilidad total de la fibra soluble fue similar entre todos los grupos (0.93). Los conejos alimentados con pulpa de remolacha y su fracción insoluble mostraron los pesos relativos más altos del estómago respecto a los del pienso control y de pectinas (11 y 56 % respectivamente; P < 0,05). Por otra parte, el peso relativo del ciego aumentó en los animales que consumieron tanto la fracción soluble como insoluble de la pulpa de remolacha, siendo un 16% más pesados (P < 0,001) que el grupo control. El pH del contenido cecal fue más bajo en los animales del grupo de pulpa de remolacha que en los del grupo control (5,64 vs. 6,03; P < 0,001), mientras que los del grupo de pectinas y de fibra insoluble de pulpa de remolacha mostraron valores intermedios. En conclusión, el efecto positivo de la pulpa de remolacha en el flujo de mucinas a nivel ileal se debe a la fracción soluble e insoluble de la pulpa de remolacha. La mitad de la fibra soluble de la pulpa de remolacha desaparece antes de llegar al ciego, independientemente si esta proviene de pectinas puras o de la pulpa de remolacha. El pH cecal esta mejor correlacionado con la cantidad de FDT que desaparece antes del ciego más que con la que se degrada en el ciego. En el último estudio se estudiaron los efectos de la fibra soluble e insoluble de la pulpa de manzana sobre la digestibilidad de la fibra y algunos parámetros digestivos. Cuatro dietas fueron formuladas con niveles similares de fibra insoluble (aFNDmo-pb 32,4%) y proteína (18,6% ambos en base seca). El pienso control contuvo el nivel más bajo de fibra soluble (46 g de fibra soluble/kg, con cascarilla de girasol y paja de cereales como la fuentes de fibra). Un segundo pienso fue obtenido mediante la sustitución de 60 g de almidón/kg del pienso control por pectinas de manzana (105 g fibra soluble/kg). Los otros dos piensos se obtuvieron por la substitución de parte de las fuentes de fibra del pienso control por pulpa de manzana o pulpa de manzana despectinizada (93 y 71 g de fibra soluble/kg, respectivamente). La digestibilidad fecal fue determinada en 23 conejos/pienso con 1.68 ± 0.23 kg de peso vivo, los cuales fueron sacrificados a los 60 d edad para recolectar su contenido digestivo para determinar digestibilidad ileal y otros parámetros digestivos. La fibra soluble de manzana (pectinas y pulpa entera) estimuló el flujo ileal de mucinas (P = 0,002), pero no asi la pulpa despectinizada. La corrección por mucinas incrementó la digestibilidad de la FDT y la fibra soluble a nivel fecal, y especialmente a nivel ileal. Cerca de la mitad de la fibra soluble proveniente de los piensos con cualquiera de las fracciones de la pulpa de manzana fue degradada a nivel ileal, sin mostrar diferencias entre los grupos (46 y 86% en promedio a nivel ileal y fecal respectivamente). La inclusión de pulpa despectinizada de manzana mejoró la digestibilidad de la FND a nivel fecal (P < 0,05) pero no a nivel ileal. El contenido cecal de los conejos alimentados con la pulpa de manzana tuvieron el pH cecal más ácido que los del pienso control (5,55 vs. 5,95. P < 0,001), mientras que los animales con el pienso de pectinas de manzana y de pulpa de manzana despectinizada mostraron valores intermedios. En conclusión los efectos positivo de la pulpa de manzana en el flujo de mucinas se debió principalmente a la fracción soluble de la pulpa de manzana. La mitad de la fibra soluble fue degradada antes del ciego independientemente de si esta provino de las pectinas o de la pulpa de manzana. El pH cecal estuvo mejor correlacionado con la cantidad de FDT fermentada en todo el tracto digestivo y antes de llegar al ciego que con la que se degradó en el ciego. Al integrar los resultados de los estudio 2, 3 y 4 se concluyó que la corrección de mucinas de los contenidos digestivos al determinar FDT y fibra soluble es necesaria para ajustar los cálculos de su digestibilidad. Esta corrección es mucho más importante a nivel ileal y en dietas bajas en fibra soluble. Por otra parte, la FDT desapareció en proporciones importantes antes de llegar al ciego, especialmente en piensos que contienen pulpa de remolacha o de manzana o alguna fracción soluble o insoluble de las mismas y estas diferencias observadas entre los piensos a nivel ileal se correlacionaron mejor con el pH cecal, lo que indicaría que la FDT se solubilizó antes de llegar al ciego y una vez en esté fermentó. Estos resultados implican que determinar la fibra soluble como FDSaFNDmo-pb es la mejor opción y que en la determinación de la digestibilidad de la FDT y fibra soluble se debe considerar la corrección por mucinas especialmente a nivel ileal y en piensos bajos en fibra soluble. ABSTRACT The present thesis constitutes a step forward in advancing the knowledge of the methods to quantify soluble fibre and the effects of the fibre fractions and source of fibre on the site the digestion of different fractions of fibre (soluble and insoluble) in the rabbit. There is a positive effect of soluble fibre on rabbit digestive health and therefore on the reduction of mortality in weaning rabbits. Nevertheless, it is no so clear that the effects of soluble fibre on rabbits are due particularly to this fraction. This thesis aims: 1) to compare the quantification of soluble fibre in feeds using different chemical and in vitro approaches, and to study the potential interference between soluble fibre and mucin determinations, 2) to identify the effects of type of fibre, site of fermentation, method to quantify insoluble and soluble fibre, and correction of the intestinal soluble fibre content for intestinal mucin on the digestibility of fibre fractions and 3) to evaluate the individual effect of soluble and insoluble fibre from sugar beet pulp and apple pulp on ileal and faecal soluble and insoluble digestibility and digestive traits. These objectives were developed in four studies: The first study compared the quantification of soluble fibre in feeds using different chemical and in vitro approaches, and studied the potential interference between soluble fibre and mucin determinations. Six ingredients, sugar beet pulp (SBP), SBP pectins, insoluble SBP, wheat straw, sunflower hulls and lignocellulose, and seven rabbit diets, differing in soluble fibre content, were evaluated. In experiment 1, ingredients and diets were analysed for total dietary fibre (TDF), insoluble dietary fibre (IDF), soluble dietary fibre (SDF), aNDFom (corrected for protein, aNDFom-cp) and 2-step pepsin/pancreatin in vitro DM indigestibility (corrected for ash and protein, ivDMi2). Soluble fibre was estimated by difference using three procedures: TDF - IDF (SDFIDF), TDF - ivDMi2 (SDFivDMi2), and TDF - aNDFom-cp (SDFaNDFom-cp). Soluble fibre determined directly (SDF) or by difference, as SDFivDMi2 were not different (109 g/kg DM, on average). However, when it was calculated as SDFaNDFom-cp the value was 40% higher (153 g/kg DM, P < 0.05), whereas SDFIDF (124 g/kg DM) did not differ from any of the other methods. The correlation between the four methods was high (r ≥ 0.96. P ≤ 0.001. n = 13), but it decreased or even disappeared when SBP pectins and SBP were excluded and a lower and more narrow range of variation of soluble fibre was used. In experiment 2, the ivDMi2 using crucibles (reference method) were compared to those made using individual or collective ankom bags in order to simplify the determination of SDFivDMi2. The ivDMi2 was not different when using crucibles or individual or collective ankom bags. In experiment 3, the potential interference between soluble fibre and intestinal mucin determinations was studied using rabbit intestinal raw mucus, digesta and SBP pectins, lignocelluloses and a rabbit diet. An interference was observed between the determinations of soluble fibre and crude mucin, as the content of TDF and apparent crude mucin were high in SBP pectins (994 and 709 g/kg DM) and rabbit intestinal raw mucus (571 and 739 g/kg DM). After a pectinase treatment, the coefficient of apparent mucin recovery of SBP pectins was close to zero, whereas that of rabbit mucus was not modified. An estimation of the crude mucin carbohydrates retained in digesta TDF is proposed to correct TDF and soluble fibre digestibility. In conclusion, the values of soluble fibre depend on the methodology used. The contamination of crude mucin with soluble fibre is avoided using pectinase. The second study focused on the effect of type of fibre, site of fermentation, method for quantifying insoluble and soluble dietary fibre, and their correction for intestinal mucin on fibre digestibility. Three diets differing in soluble fibre were formulated (85 g/kg DM soluble fibre, in the low soluble fibre [LSF] diet; 102 g/kg DM in the medium soluble fibre [MSF] diet; and 145 g/kg DM in the high soluble fibre [HSF] diet). They were obtained by replacing half of the dehydrated alfalfa in the MSF diet with a mixture of beet and apple pulp (HSF diet) or with a mix of oat hulls and soybean protein (LSF diet). Thirty rabbits with ileal T-cannulas were used to determine total tract apparent digestibility (CTTAD) and ileal apparent digestibility (CIAD). Caecal digestibility was determined by difference between CTTAD and CIAD. Insoluble fibre was measured as aNDFom-cp, IDF, and ivDMi2, whereas soluble fibre was calculated as SDFaNDFom-cp, SDFIDF, SDFivDMi2. The intestinal mucin content was used to correct the TDF and soluble fibre digestibility. Ileal and faecal concentration of mucin increased from the LSF to the HSF diet group (P < 0.01). Once corrected for intestinal mucin, The CTTAD and CIAD of TDF and soluble fibre increased whereas caecal digestibility decreased (P < 0.01). The CIAD of TDF increased from the LSF to the HSF diet group (0.12 vs. 0.281. P < 0.01), with no difference in the caecal digestibility (0.264), resulting in a higher CTTAD from the LSF to the HSF diet group (P < 0.01). The CIAD of insoluble fibre increased from the LSF to the HSF diet group (0.113 vs. 0.21. P < 0.01), with no difference in the caecal digestibility (0.139) and no effect of fibre method, resulting in a higher CTTAD for rabbits fed the HSF diet compared with the MSF and LSF diets groups (P < 0.01). The CTTAD of aNDFom-cp was higher compared with IDF or ivDMi2 (P < 0.01). The CIAD of soluble fibre was higher for the HSF than for the LSF diet group (0.436 vs. 0.145. P < 0.01) and fibre method did not affect it. Caecal soluble fibre digestibility decreased from the LSF to the HSF diet group (0.721 vs. 0.492. P < 0.05). The lowest caecal and faecal soluble fibre digestibility was measured using SDFaNDFom-cp (P < 0.01). There was a high correlation among the digestibilities of soluble fibre measured as SDFaNDFom-cp, SDFIDF, and SDFivDMi2. Therefore, these methodologies provide similar information. However, the method that seems to be globally better related to the physiological traits (ileal flow of mucins, and relative weight of the caecum and caecal pH from previous work) was the SDFaNDFom-cp. In conclusion, a correction for intestinal mucin is necessary for ileal TDF and soluble fibre digestibility whereas the selection of the fibre method has a minor relevance. The inclusion of sugar beet and apple pulp increased the amount of TDF fermented in the small intestine. The third study examined the effect of fibre fractions of sugar beet pulp (SBP) and the method for quantifying soluble and insoluble fibre on soluble and insoluble fibre digestibility and digestive traits. Four diets were formulated with similar level of insoluble fibre (aNDFom-cp: 315 g/kg DM) and protein (167 g/kg DM). Control diet contained the lowest level of soluble fibre (30.3 g/kg DM, including sunflower hulls and straw as sole sources of fibre). A second diet was obtained by replacing 60 g starch/kg of control diet with SBP pectins (82.9 g soluble fibre/kg DM). Two more diets were obtained by replacing part of the fibrous sources of the control diet with either insoluble SBP fibre or SBP (42.2 and 82.3 g soluble fibre/kg DM, respectively). Fifty six (14/diet) rabbits weighing 2.40  0.213 kg were used to determine faecal and ileal digestibility of total dietary fibre (TDF), insoluble dietary fibre (IDF), neutral detergent fibre corrected for ash and CP (aNDFom-cp) and soluble fibre estimated as SDFaNDFom-cp and SDFIDF. Faecal and ileal mucin content was used to correct TDF and soluble fibre digestibility. It was also recorded weight of digestive segments and digesta pH. Rabbits fed insoluble SBP showed the lowest feed intake with respect to the other 3 diets (124 vs. 139 g/d, respectively. P < 0.05). Ileal mucin flow was higher (P < 0.05) in animals fed pectin and SBP diets (9.0 g/d, as average) than those fed control diet (4.79 g/d), showing InsSBP group an intermediate value. No differences on mucin content were detected at faecal level. There was no diet effect on the CIAD of TDF (corrected for mucin) and insoluble fibre. Fibre methodology influenced the CIAD of insoluble fibre (0.123 for IDF vs. 0.108 for aNDFom-cp. P < 0.01). Anyway, the amount of insoluble fibre fermented before the caecum did not differ between both methods (4.9 g/d, on average). Rabbits fed insoluble SBP and SBP diets showed the highest CTTAD of insoluble fibre (0.266 on average vs. 0.106 for control group), whereas those fed pectin diet had an intermediate value (0.106. P < 0.001). The CTTAD of insoluble fibre measured with IDF was higher than that measured with aNDFom-cp (by 20%. P < 0.001). It led that the amount of insoluble fibre fermented along the digestive tract were different (9.5 or 7.5 g/d when calculated as IDF or aNDFom-cp, respectively; P < 0.001). When the CIAD of soluble fibre was corrected for mucin they became positive (P < 0.001) except for control group measured as SDFIDF. Once corrected for mucin content, rabbits fed soluble fibre from SBP (pectin and SBP groups) showed higher CIAD of soluble fibre than control group (0.483 vs. -0.019. respectively), whereas the value for insoluble SBP group was intermediate 0.274. The CTTAD of soluble fibre (mucin corrected) was similar among diets 0.93. Rabbits fed with SBP and insoluble SBP diets showed higher total digestive tract and stomach relative weight than those fed pectin and control diets (by 11 and 56 %. respectively, P < 0.05). The caecal relative weight did not differ in rabbits fed pectin, insoluble SBP, and SBP diets (62 g/kg BW, as average) and they were on average 16% higher (P < 0.001) than in control group. Caecal content of rabbits fed SBP diet was more acid than those fed control diet (5.64 vs. 6.03. P < 0.001), whereas those from pectin and insoluble SBP diets showed intermediate values. In conclusion, the positive effect of SBP fibre on ileal mucin flow was due to both its soluble and insoluble fibre fraction. Half of the soluble SBP fibre was degraded before the caecum independently it came from pectin or SBP. The caecal pH correlated better with the ileal amount of fermented TDF in the digestive tract rather than with that fermented in the caecum. The last study examined the effect of soluble and insoluble fibre of apple pulp on fibre digestibility and digestive traits. Four diets were formulated with similar level of insoluble fibre (aNDFom-cp: 324 g/kg DM) and protein (18.6 g/kg DM). Control diet contained the lowest level of soluble fibre (46 g soluble fibre/kg DM, including oat hulls and straw as sole sources of fibre). A second diet was obtained by replacing 60 g starch/kg of control diet with apple pectins (105 g soluble fibre/kg DM). Two more diets were obtained by substituting part of the fibrous sources of the control diet by either apple pulp or depectinized apple pulp (93 and 71 g soluble fibre/kg, respectively). The CTTAD was determined in 23 rabbits/diet weighing 1.68  0.23 kg BW, and 23 rabbits/diet were slaughtered at 60 d of age to collect ileal digesta to determine CIAD and record other digestive traits. Soluble fibre from apple stimulated ileal flow of mucin (P = 0.002), but depectinized apple pulp did not. The correction for mucin increased the digestibility of crude protein, total dietary fibre, and soluble fibre at faecal, but especially at ileal level, depending in this case on the diet. Around half of the soluble fibre in diets containing any fibre fraction from apple was degraded at ileal level, with no differences among these diets (0.46 vs. 0.066 for control group, P=0.046). Faecal soluble fibre digestibility was 0.86 on average for all groups). Inclusion of the apple insoluble fibre improved NDF digestibility at faecal (0.222 vs. 0.069. P < 0.05) but not at ileal level. Caecal content of rabbits fed apple pulp diet was more acid than those fed control diet (5.55 vs. 5.95. P < 0.001), whereas those from pectin and depectinised apple pulp diets showed intermediate values. In conclusion, the positive effect of apple fibre on ileal mucin flow was mainly due to its soluble fibre fraction. Half of the soluble apple fibre was degraded before the caecum independently it came from pectin or apple pulp. The caecal pH correlated better with the total and ileal amount of fermented TDF in the digestive tract rather than with that fermented in the caecum. The results obtained in the studies 2, 3 and 4 were considered together. These results showed that the mucin correction is necessary when the TDF and soluble fibre digestibility is determined, and it correction is more important at ileal level and in diets with low level of soluble fibre. On another hand, incrementing the soluble fibre using sugar beet and apple pulp increased the amount of TDF disappear before the caecum. Moreover, the caecal pH correlated better with the ileal amount of fermented TDF in the digestive tract rather than with that fermented in the caecum. This suggests that an ileal fibre solubilisation may occur rather than ileal fermentation. Therefore the implications of this work were that: the estimation of soluble fibre as SDFaNDFom-cp is an adequate method considering its correlation with the physiological effects; and the TDF and soluble fibre digestibility must be corrected with intestinal mucins, especially when the ileal digestibility is determined.