8 resultados para rate of convergence
em Universidad Politécnica de Madrid
Resumo:
In this paper we show that the effect of jitter due to driver and LED is the limiting factor in the baud rate in L-PPM formats for VLC systems.
Resumo:
Objective: In this study, the authors assessed the effects of a structured, moderate-intensity exercise program during the entire length of pregnancy on a woman’s method of delivery. Methods: A randomized controlled trial was conducted with 290 healthy pregnant Caucasian (Spanish) women with a singleton gestation who were randomly assigned to either an exercise (n=138) or a control (n=152) group. Pregnancy outcomes, including the type of delivery, were measured at the end of the pregnancy. Results: The percentage of cesarean and instrumental deliveries in the exercise group were lower than in the control group (15.9%, n=22; 11.6%, n=16 vs. 23%, n=35; 19.1%, n=29, respectively; p=0.03). The overall health status of the newborn as well as other pregnancy outcomes were unaffected. Conclusions: Based on these results, a supervised program of moderate-intensity exercise performed throughout pregnancy was associated with a reduction in the rate of cesarean sections and can be recommended for healthy women in pregnancy.
Resumo:
The effect of water potential ( J w ) on the growth of 15 fungal species isolated from cheeses was analysed. The species, identified mainly by analysis of DNA sequences, belonged to genera Penicillium , Geotrichum , Mucor , Aspergillus , Microascus and Talaromyces . Particularly, the effect of matric potential ( J m ), and ionic (NaCl) and non-ionic (glycerol) solute potentials ( J s ) on growth rate was studied. The response of strains was highly dependent on the type of J w . For J s , clear profiles for optimal, permissive and marginal conditions for growth were obtained, and differences in growth rate were achieved comparing NaCl and glycerol for most of the species. Conversely, a sustained growth was obtained for J m in all the strains, with the exception of Aspergillus pseudoglaucus , whose growth increased proportionally to the level of water stress. Our results might help to understand the impact of environmental factors on the ecophysiology and dynamics of fungal populations associated to cheeses.
Resumo:
We characterize the region of meromorphic continuation of an analytic function ff in terms of the geometric rate of convergence on a compact set of sequences of multi-point rational interpolants of ff. The rational approximants have a bounded number of poles and the distribution of interpolation points is arbitrary.
Resumo:
The effect of water potential ( J w ) on the growth of 15 fungal species isolated from cheeses was analysed. The species, identi fi ed mainly by analysis of DNA sequences, belonged to genera Penicillium, Geotrichum, Mucor , Aspergillus , Microascus and Talaromyces . Particularly, the effect of matric potential ( J m ), and ionic (NaCl) and non-ionic (glycerol) solute potentials ( J s ) on growth rate was studied. The response of strains was highly dependent on the type of J w . For J s, clear profiles for optimal, permissive and marginal conditions for growth were obtained, and differences in growth rate were achieved comparing NaCl and glycerol for most of the species. Conversely, a sustained growth was obtained for J m in all the strains, with the exception of Aspergillus pseudoglaucus, whose growth increased proportionally to the level of water stress. Our results might help to understand the impact of environmental factors on the ecophysiology and dynamics of fungal populations associated to cheeses.
Resumo:
In this paper we describe a new promising procedure to model hyperelastic materials from given stress-strain data. The main advantage of the proposed method is that the user does not need to have a relevant knowledge of hyperelasticity, large strains or hyperelastic constitutive modelling. The engineer simply has to prescribe some stress strain experimental data (whether isotropic or anisotropic) in also user prescribed stress and strain measures and the model almost exactly replicates the experimental data. The procedure is based on the piece-wise splines model by Sussman and Bathe and may be easily generalized to transversely isotropic and orthotropic materials. The model is also amenable of efficient finite element implementation. In this paper we briefly describe the general procedure, addressing the advantages and limitations. We give predictions for arbitrary ?experimental data? and also give predictions for actual experiments of the behaviour of living soft tissues. The model may be also implemented in a general purpose finite element program. Since the obtained strain energy functions are analytic piece-wise functions, the constitutive tangent may be readily derived in order to be used for implicit static problems, where the equilibrium iterations must be performed and the material tangent is needed in order to preserve the quadratic rate of convergence of Newton procedures.
Resumo:
En esta tesis, el método de estimación de error de truncación conocido como restimation ha sido extendido de esquemas de bajo orden a esquemas de alto orden. La mayoría de los trabajos en la bibliografía utilizan soluciones convergidas en mallas de distinto refinamiento para realizar la estimación. En este trabajo se utiliza una solución en una única malla con distintos órdenes polinómicos. Además, no se requiere que esta solución esté completamente convergida, resultando en el método conocido como quasi-a priori T-estimation. La aproximación quasi-a priori estima el error mientras el residuo del método iterativo no es despreciable. En este trabajo se demuestra que algunas de las hipótesis fundamentales sobre el comportamiento del error, establecidas para métodos de bajo orden, dejan de ser válidas en esquemas de alto orden, haciendo necesaria una revisión completa del comportamiento del error antes de redefinir el algoritmo. Para facilitar esta tarea, en una primera etapa se considera el método conocido como Chebyshev Collocation, limitando la aplicación a geometrías simples. La extensión al método Discontinuouos Galerkin Spectral Element Method presenta dificultades adicionales para la definición precisa y la estimación del error, debidos a la formulación débil, la discretización multidominio y la formulación discontinua. En primer lugar, el análisis se enfoca en leyes de conservación escalares para examinar la precisión de la estimación del error de truncación. Después, la validez del análisis se demuestra para las ecuaciones incompresibles y compresibles de Euler y Navier Stokes. El método de aproximación quasi-a priori r-estimation permite desacoplar las contribuciones superficiales y volumétricas del error de truncación, proveyendo información sobre la anisotropía de las soluciones así como su ratio de convergencia con el orden polinómico. Se demuestra que esta aproximación quasi-a priori produce estimaciones del error de truncación con precisión espectral. ABSTRACT In this thesis, the τ-estimation method to estimate the truncation error is extended from low order to spectral methods. While most works in the literature rely on fully time-converged solutions on grids with different spacing to perform the estimation, only one grid with different polynomial orders is used in this work. Furthermore, a non timeconverged solution is used resulting in the quasi-a priori τ-estimation method. The quasi-a priori approach estimates the error when the residual of the time-iterative method is not negligible. It is shown in this work that some of the fundamental assumptions about error tendency, well established for low order methods, are no longer valid in high order schemes, making necessary a complete revision of the error behavior before redefining the algorithm. To facilitate this task, the Chebyshev Collocation Method is considered as a first step, limiting their application to simple geometries. The extension to the Discontinuous Galerkin Spectral Element Method introduces additional features to the accurate definition and estimation of the error due to the weak formulation, multidomain discretization and the discontinuous formulation. First, the analysis focuses on scalar conservation laws to examine the accuracy of the estimation of the truncation error. Then, the validity of the analysis is shown for the incompressible and compressible Euler and Navier Stokes equations. The developed quasi-a priori τ-estimation method permits one to decouple the interfacial and the interior contributions of the truncation error in the Discontinuous Galerkin Spectral Element Method, and provides information about the anisotropy of the solution, as well as its rate of convergence in polynomial order. It is demonstrated here that this quasi-a priori approach yields a spectrally accurate estimate of the truncation error.
Resumo:
In this paper we show how to accurately perform a quasi-a priori estimation of the truncation error of steady-state solutions computed by a discontinuous Galerkin spectral element method. We estimate the spatial truncation error using the ?-estimation procedure. While most works in the literature rely on fully time-converged solutions on grids with different spacing to perform the estimation, we use non time-converged solutions on one grid with different polynomial orders. The quasi-a priori approach estimates the error while the residual of the time-iterative method is not negligible. Furthermore, the method permits one to decouple the surface and the volume contributions of the truncation error, and provides information about the anisotropy of the solution as well as its rate of convergence in polynomial order. First, we focus on the analysis of one dimensional scalar conservation laws to examine the accuracy of the estimate. Then, we extend the analysis to two dimensional problems. We demonstrate that this quasi-a priori approach yields a spectrally accurate estimate of the truncation error.