Using quantitative descriptive analysis and temporal dominance of sensations analysis as complementary methods for profiling commercial blackcurrant squashes

Quantitative descriptive analysis (QDA) is used to describe the nature and the intensity of sensory properties from a single evaluation of a product, whereas temporal dominance of sensation (TDS) is primarily used to identify dominant sensory properties over time. Previous studies with TDS have focused on model systems, but this is the first study to use a sequential approach, i.e. QDA then TDS in measuring sensory properties of a commercial product category, using the same set of trained assessors (n = 11). The main objectives of this study were to: (1) investigate the benefits of using a sequential approach of QDA and TDS and (2) to explore the impact of the sample composition on taste and flavour perceptions in blackcurrant squashes. The present study has proposed an alternative way of determining the choice of attributes for TDS measurement based on data obtained from previous QDA studies, where available. Both methods indicated that the flavour profile was primarily influenced by the level of dilution and complexity of sample composition combined with blackcurrant juice content. In addition, artificial sweeteners were found to modify the quality of sweetness and could also contribute to bitter notes. Using QDA and TDS in tandem was shown to be more beneficial than each just on its own enabling a more complete sensory profile of the products.

New perspectives on quantitative textural analysis

Process mineralogy provides the mineralogical information required by geometallurgists to address the inherent variation of geological data. The successful benefitiation of ores mostly depends on the ability of mineral processing to be efficiently adapted to the ore characteristics, being liberation one of the most relevant mineralogical parameters. The liberation characteristics of ores are intimately related to mineral texture. Therefore, the characterization of liberation necessarily requieres the identification and quantification of those textural features with a major bearing on mineral liberation. From this point of view grain size, bonding between mineral grains and intergrowth types are considered as the most influential textural attributes. While the quantification of grain size is a usual output of automated current technologies, information about grain boundaries and intergrowth types is usually descriptive and difficult to quantify to be included in the geometallurgical model. Aiming at the systematic and quantitative analysis of the intergrowth type within mineral particles, a new methodology based on digital image analysis has been developed. In this work, the ability of this methodology to achieve a more complete characterization of liberation is explored by the analysis of chalcopyrite in the rougher concentrate of the Kansanshi copper-gold mine (Zambia). Results obtained show that the method provides valuable textural information to achieve a better understanding of mineral behaviour during concentration processes. The potential of this method is enhanced by the fact that it provides data unavailable by current technologies. This opens up new perspectives on the quantitative analysis of mineral processing performance based on textural attributes.

Identificación y evaluación de la creación de valor mediante la implantación y desarrollo de políticas de responsabilidad social corporativa estratégica

La Responsabilidad Social Corporativa (RSC) sigue constituyendo en la actualidad un área de estudio de elevado interés tanto para la comunidad académica como para los negocios en general. A pesar del gran número de investigaciones realizadas en las pasadas décadas sobre los distintos aspectos que la caracterizan, y la definición generalizada de políticas relacionadas en las compañías más importantes, existen todavía algunos asuntos clave sobre los que se plantean interrogantes fundamentales. La complejidad asociada al constructo RSC y su carácter intrínsecamente dinámico explican en parte esta afirmación. En su aplicación práctica, las dudas sobre la RSC se enfocan hoy en día hacia su implantación con carácter permanente en el día a día de las organizaciones, la relevancia estratégica de las principales iniciativas, o la posibilidad de obtención de beneficios a medio y largo plazo. Se observa de esta forma la traslación de los debates principales hacia las consecuencias más estratégicas de dichas políticas, influenciados por prestigiosos estudios académicos en los que se caracteriza la denominada RSC Estratégica (RSCE), y por las principales organizaciones de certificación de memorias anuales de RSC y sostenibilidad. En este contexto se sitúa el objeto principal de esta investigación, consistente en el diseño de un modelo de implantación de RSCE que permita no sólo identificar los factores más importantes a tener en consideración para su éxito, sino para caracterizar las potenciales formas de creación de valor que pueden surgir de la aplicación del mismo. Se argumenta la elección del tema por considerarse que los asuntos asociados a la RSC no están lo suficientemente explorados desde la visión estratégica más actual, y por constituir la creación de valor el objetivo más crítico dentro de los procesos directivos de planificación estratégica. De esta forma, se utilizan dos metodologías para destacar qué factores son esenciales en la implantación de la RSCE, con qué fines las compañías aplican esas políticas, y qué resultados obtienen como consecuencia: análisis comparativo de casos de estudio y análisis estadístico cuantitativo. Los casos de estudio analizan en profundidad políticas globales de RSCE bajo diferentes puntos de vista, para derivar conclusiones sobre los factores que facilitan u obstaculizan su implantación permanente en las organizaciones. Su desarrollo se estructura en torno a un marco conceptual de referencia obtenido a través de la revisión bibliográfica específica, y se complementa con la información primaria y secundaria de investigación. Por su parte, el análisis cuantitativo se desarrolla mediante tres técnicas exploratorias: estadística descriptiva, regresión múltiple y análisis de componentes principales. Su aplicación combinada va a posibilitar el contraste de aspectos destacados en los análisis de casos, así como la configuración final del modelo de implantación, y la expresión numérica de la creación de valor a través de la RSCE en función de las dimensiones estratégicas consideradas. En consecuencia, los resultados de la tesis se estructuran alrededor de tres preguntas de investigación: ¿cómo se están produciendo y qué caracterización presentan los beneficios que resultan como consecuencia de la implantación de la RSCE en los procesos de planificación estratégica de las compañías?, ¿qué factores esenciales y característicos de la RSCE pueden resultar críticos en los procesos de implantación y futuro desarrollo?, y ¿qué importancia puede tener en el medio y largo plazo el poder de decisión de compra de los consumidores y usuarios finales en la implantación y desarrollo de políticas de RSCE? ABSTRACT Corporate Social Responsibility (CSR) remains a study area of high interest today to both the academic community and businesses in general. Despite the large number of investigations of various aspects of CSR in past decades, and its generalized consideration by the world’s most important companies, there are still some key issues and fundamental questions to resolve. The complexity associated with the CSR construct and its inherently dynamic character, partly explains this statement. In its practical application, doubts about CSR arise today about its permanent implementation in normal business activities, the strategic relevance of related policies, and the possibility of making profits in the medium and long term. It is observed in this way the translation of the main debates towards the more strategic consequences of these policies, influenced by prestigious academic studies that characterize the so-called Strategic CSR (SCSR), and by leading certification agencies of CSR and sustainability reports. In this context, the main purpose of this investigation is to design a model of SCSR for implementation that allows one to not only identify the most important factors to consider for SCSR success, but also to characterize potential forms of value creation that can arise from its application. The selection of this research approach is justified because it is believed that important issues that are associated with CSR have not been sufficiently explored from the aspect of the strategic vision in the current context, and because value creation constitutes the most critical objective within the strategic planning steering processes. Thus, two methods are used to highlight which factors are essential in SCSR implementation processes, the end to which companies apply these policies, and the kind of results that they expect. These methods are: comparative analysis of case studies and quantitative statistical analysis. The case studies discuss in depth SCSR global policies under different perspectives to draw conclusions about the factors that facilitate or hinder permanent implantation in organizations. Their development is structured around a conceptual framework that is obtained by review of specific literature, and is complemented by primary and secondary research information. On the other hand, quantitative analysis is developed by means of three exploratory techniques: descriptive statistics, multiple regression and principal component analysis. Their combined application facilitates a contrast of highlighted aspects in analyzing cases, the final configuration of the implementation model, and the numerical expression of value creation by SCSR as a consequence of the strategic dimensions considered by companies. Finally, the results of the thesis are structured around three research questions: what are the benefits that result from the implementation of SCSR policies in companies’ strategic planning processes?, which essential SCSR factors are potentially critical in the implementation and future development of companies’ processes?, and how decisive in the medium and long term will be the purchase decision power of consumers to the success of SCSR policies?

Montecarlo method applied to comparison of tenders in construction projects.

La comparación de las diferentes ofertas presentadas en la licitación de un proyecto,con el sistema de contratación tradicional de medición abierta y precio unitario cerrado, requiere herramientas de análisis que sean capaces de discriminar propuestas que teniendo un importe global parecido pueden presentar un impacto económico muy diferente durante la ejecución. Una de las situaciones que no se detecta fácilmente con los métodos tradicionales es el comportamiento del coste real frente a las variaciones de las cantidades realmente ejecutadas en obra respecto de las estimadas en el proyecto. Este texto propone abordar esta situación mediante un sistema de análisis cuantitativo del riesgo como el método de Montecarlo. Este procedimiento, como es sabido, consiste en permitir que los datos de entrada que definen el problema varíen unas funciones de probabilidad definidas, generar un gran número de casos de prueba y tratar los resultados estadísticamente para obtener los valores finales más probables,con los parámetros necesarios para medir la fiabilidad de la estimación. Se presenta un modelo para la comparación de ofertas, desarrollado de manera que puede aplicarse en casos reales aplicando a los datos conocidos unas condiciones de variación que sean fáciles de establecer por los profesionales que realizan estas tareas. ABSTRACT: The comparison of the different bids in the tender for a project, with the traditional contract system based on unit rates open to and re-measurement, requires analysis tools that are able to discriminate proposals having a similar overall economic impact, but that might show a very different behaviour during the execution of the works. One situation not easily detected by traditional methods is the reaction of the actual cost to the changes in the exact quantity of works finally executed respect of the work estimated in the project. This paper intends to address this situation through the Monte Carlo method, a system of quantitative risk analysis. This procedure, as is known, is allows the input data defining the problem to vary some within well defined probability functions, generating a large number of test cases, the results being statistically treated to obtain the most probable final values, with the rest of the parameters needed to measure the reliability of the estimate. We present a model for the comparison of bids, designed in a way that it can be applied in real cases, based on data and assumptions that are easy to understand and set up by professionals who wish to perform these tasks.

Ecología de la dispersión de plantas en los bosques secos del suroccidente Ecuatoriano

La importancia del proceso de dispersión de semillas en la estructura y dinámica de los ecosistemas es ampliamente reconocida. Sin embargo, para los bosques tropicales estacionalmente secos los estudios relacionados con este proceso son aún escasos y dispersos en comparación con los bosques tropicales lluviosos. En este trabajo se estudió la importancia de los síndromes de dispersión de semillas en la estructuración de comunidades, mediante el análisis de los patrones de dispersión de semillas en el espacio y tiempo para comunidades de leñosas en los bosques secos del suroccidente Ecuatoriano. Esta área forma parte de la región Tumbesina, una de las áreas de endemismo más importantes del mundo, pero también uno de los hotspots más amenazados. El clima se caracteriza por una estación seca que va de mayo a noviembre y una estación lluviosa que se extiende desde diciembre a abril. Para toda esta zona se estima una temperatura promedio anual entre 20° y 26°C y una precipitación promedio anual entre 300 y 700 mm. El trabajo de campo se desarrolló entre febrero de 2009 y septiembre de 2012. El primer paso fue la recopilación de información sobre las especies leñosas nativas de los bosques secos del suroccidente de Ecuador, que permitiera asignar a cada especie a un síndrome de dispersión para determinar el espectro de síndromes de dispersión de semillas. Luego, utilizando la información disponible de 109 parcelas establecidas previamente a lo largo de cuatro cantones de la provincia de Loja que conservan bosques secos en buen estado, se analizó la relación entre el síndrome de dispersión y condiciones ambientales. La relación de los síndromes de dispersión con los patrones espaciales de las especies y con los patrones de la lluvia y banco de semillas se estudió dentro de una parcela permanente de 9 ha, en la Reserva Ecológica Arenillas. Dentro de esta parcela se estableció un transecto de aproximadamente 3,4 km, que se recorrió mensualmente para colectar excretas de cérvidos y analizar el rol de este grupo como dispersor de semillas. Una gran variedad de plantas en los bosques secos tropicales del suroccidente de Ecuador requirió la asistencia de animales para la dispersión de semillas. Sin embargo, un análisis del espectro de dispersión considerando no solo la riqueza, sino también la abundancia relativa de especies, permitió determinar que a pesar de la alta variedad de especies zoócoras, la mayor parte de la comunidad correspondía a individuos anemócoros, que no proveen ninguna recompensa para la dispersión por animales. Este patrón puede deberse a la abundancia relativa de hábitats adecuados para especies con diferente síndrome de dispersión. Las condiciones ambientales afectaron la estructura del espectro de dispersión en la comunidad de bosque seco neotropical estudiada. El análisis de la importancia relativa del síndrome de dispersión y de la heterogeneidad espacial en la formación de patrones espaciales de árboles adultos permitió determinar que la heterogeneidad ambiental ejercía un efecto adicional (y en algunos el único) en la formación de patrones agregados de la mayoría de especies estudiadas. Los resultados señalaron diferencias en los patrones espaciales de las especies dependiendo del síndrome de dispersión, pero también una gran variación en los patrones espaciales incluso entre especies del mismo síndrome de dispersión. El análisis simultáneo de los patrones de la lluvia de semillas y banco de semillas de una comunidad de leñosas y su relación con la vegetación establecida indicaron que la lluvia de semillas era temporalmente variable en número de especies y abundancia de semillas, y dependía del síndrome de dispersión. El síndrome de dispersión también influyó en la formación de bancos de semillas, siendo las especies con capacidad de dispersión limitada (autócoras) las de mayor riqueza de especies y abundancia de semillas. Los cérvidos también se consideraron como un elemento clave en el proceso de dispersión de semillas. Al menos ocho especies leñosas fueron dispersadas legítimamente vía endozoócora. La mayoría de las especies dispersadas presentaron diásporas sin adaptaciones obvias para la dispersión, por lo que la ingestión de semillas por cérvidos se constituye en una vía potencial para la dispersión de sus semillas a largas distancias y, con ello, mejora la posibilidad de colonizar nuevos sitios y mantener el flujo genético. Los resultados de este estudio aportan nuevas evidencias para el entendimiento de la importancia de los procesos de dispersión de semillas en la estructura de los bosques secos neotropicales. Uno de los principales hallazgos a partir de estos cuatro capítulos es que los patrones espaciales de las especies, así como las estrategias que utilizan para dispersarse y hacer frente a las condiciones adversas (es decir, lluvia o banco de semillas) llevan consigo un efecto del síndrome de dispersión, y que la intensidad ese efecto depende a la vez de las condiciones ambientales del lugar. ABSTRACT The importance of seed dispersal process in the estructuring and ecosystem dynamic is widely recongnized. However, for seasonally tropical dry forest studies related to this process are still scarce and scattered compared to tropical rain forests. The present research deals with the importance of seed dispersal syndromes as a driver in the community structure, focusing its attention to temporal and spatial patterns of seed dispersal in woody communities of seasonally dry forest at Southwestern Ecuador. This area is part of the Tumbesian region, one of the most important areas of endemism, but also one of the most threatened areas around the world. Climate is characterized by a dry season from May to November, and a rainy season from December to April. For the whole area an average temperature between 20 ° and 26 ° C, and an average annual rainfall between 300 and 700 mm are estimated. Fieldwork was carried out between February 2009 and September 2012. During a first step information about native woody species of dry forests of southwestern Ecuador was gathered, enabling to assign a dispersal syndrome to each species to determine the seed dispersal spectrum. In a second step, available information from 109 established plots along four municipalities in Loja province, which hold the highest and best conserved dry forest remanants, was analyzed to establish the relationship between dispersal syndromes and environmental conditions. The relationships between dispersal syndromes and species spatial patterns; and between dispersal syndromes and seed rain and seed bank patterns, were studied within a permanent plot of 9 ha, in the Arenillas Ecological Reserve. Within this plot one transect of approximately 3.4 km was set to collect monthly deer droppings, which were used to latter analyze the rol of this group as seed dispersers. The results showed that a large variety of plants in tropical dry forest of Southwestern Ecuador require animal assistance to dispers their seeds. However, an analysis of seed dispersal spectrum considering not only species richness, but also the relative abundance of species, allowed to determine that despite the high variety of zoochorous species, most individuals in the community corresponds to anemochoruos species. This shift may be due to the relative abundance of habitats that are suitable for species with different dispersal syndromes. Moreover, quantitative data analysis showed that environmental conditions affect the structure of seed dispersal spectrum in the studied community. The analysis of relative importance of dispersal syndrome, and the environmental heterogeneity on formation of adult trees spatial patterns, indicated that environmental heterogeneity exert an additional (or was the only) effect limiting the distribution of most species in this forest. The findings showed differences in spatial patterns related to dispersal syndrome, but also showed a large variation in spatial patterns even among species sharing the same dispersal syndrome. Simultaneous analysis of seed rain and seed bank patterns of a woody community, and their relationship with established vegetation, suggested that seed rain is temporally variable in species number and seeds abundance, and that variation is related to the dispersal syndrome. Dispersal syndrome also influenced on the formation of seed banks, being species with limited dispersal abilities (autochorous) the ones with highest species richness and seed abundance. Deer were found as a key element in the seed dispersal process. At least to eight woody species were dispersed legitimately by ingestion. Diaspores of most dispersed species had no obvious adaptations to seed dispersal, therefore, seed ingestion by deer represents a potential pathway for long-distance dispersal, and hence, improves the chances to colonizing new sites and to maintain gene flow. Overall, these results provide new evidence for understanding the importance of seed dispersal processes in the structure of Neotropical dry forests. One of the major findings from these four chapters is that spatial patterns of species, and the strategies used to disperse their seeds and to deal with the adverse conditions (i.e. seed rain or seed bank) are related with dispersal syndromes, and the intensity of that relation depends in turn, on environmental conditions.

Fashion in Actions on Social Media – Spanish SME Fashion Brands Case Studies

Fashion is one of the most vibrant sectors in Europe and important contributors to the European Union (EU) economy. In particular, Small and Medium Enterprises (SMEs) play a major part in European fashion industry (EU 2012). Just like fashion, where people¿s style has inherently meant to be shared as it is foremost a representation of one¿s self-image, social media allow the reflection of ones' personality and emotions. Although fashion practitioners have embraced social media in their marketing activities, it is still relatively few known at an academic level about the specificities of fashion industry when approaching social media marketing (SMM) strategies. This study sets out to explore fashion companies' SMM strategy and its activities. From an exploratory approach, we present case studies of two Spanish SME fashion companies, anonymously named hereafter as Company A and Company B, to deepen our understanding on how fashion brands implement their SMM strategy. Company A offers high-end fashion products while Company B produces medium fashion products. We analyzed the case studies using qualitative (interviews to companies' executives) and a mix of qualitative and quantitative (content analysis of companies' social media platform) methods. Public posts data of both companies' Facebook brand pages were used to perform the content analysis. Our findings through case studies of the two companies reveal that branding-oriented strategic objectives are the main drivers of their SMM implementations. There are significant differences between both companies. The main strategic action employed by Company A is engaging customers to participate into brand's offline social gathering events by inviting them through social media platform, while Company B focuses its effort on posting product promotion related contents and engaging influencers such as fashion bloggers. Our results are expected to serve as a basis of further investigations on how SMM strategy and strategic actions implemented by fashion brands may influence marketing outcomes.

Determinación y caracterización de los indicadores que intervienen en un sistema integral de iluminación natural y protección solar : aplicado a la incorporación de bandejas en los huecos de fachadas existentes

En esta tesis se estudia cómo lograr el equilibrio entre dos fenómenos naturales que afectan a los huecos de fachadas: la iluminación natural y la ganancia solar. Es decir, el cómo, conseguir la optimización de la iluminación natural que se introduce a través de las ventanas existentes, sin realizar una laboriosa intervención de sustitución de las mismas y el cómo, conseguir la protección de la radiación solar directa de la zona acristalada, para evitar tanto las ganancias térmicas innecesarias como el deslumbramiento que afecta a la calidad lumínica de los recintos. Para el desarrollo esta investigación se ha propuesto una metodología de estudio dividida en dos fases: La primera, de Análisis y Diagnóstico, en la que se han de definir los estándares a cumplir y las variables con las que se evaluarán las bandejas. Y, la segunda, de Evaluación y Comprobación en la que se han de establecer los criterios de valoración y ponderación de cada variable. En la primera fase, se definirán las variables físico-ambientales, para lo que se seleccionarán algunas ciudades a estudiar, a las cuales se les estudiará las necesidades de confort térmico, se determinarán las dimensiones que deben tener las protecciones solares en esas ciudades, además se determinarán las actuaciones a realizar en los huecos de fachada según sea su posición en el plano vertical de la misma. Así mismo, se plantea hacer un análisis de casos reales, para lo que se caracterizarán desde el punto de vista lumínico algunas viviendas, realizando medidas “in situ” y comparando resultados con los que se obtienen de los programas de simulación, para seleccionar las viviendas en las que la realidad y la simulación se aproximen más, una de estas viviendas servirá de modelo en las simulaciones que se realizará en la segunda fase. También, en esta primera fase, mediante un modelo neutro, se estudiará el comportamiento térmico y lumínico del tamaño del hueco en el que se insertará la bandeja posteriormente, para luego estudiar la posición de la bandeja en el plano vertical de la ventana, desde el punto de vista ergonómico. Y finalmente se estudiará, el comportamiento térmico y lumínico del modelo con la bandeja ubicada a 40, 50 y 60cm del techo. En la segunda fase, se establecerá la valoración y ponderación de las variables con las que seleccionar la bandeja que mejor equilibre los aspectos térmicos y lumínicos, teniendo en cuenta estrategias pasivas de acondicionamiento ambiental, como favorecer las ganancias solares en invierno en horas diurnas y evitar las pérdidas de calor en horas nocturnas; y en verano implementar sistemas de sombreamiento en la zona acristalada para evitar las ganancias de calor; y, tanto en verano como en invierno, aprovechar la iluminación natural, para favorecer la iluminancia útil y evitar el deslumbramiento. Una vez definidos los criterios de valoración y ponderación se aplicará a la evaluación térmica y lumínica del modelo neutro con la bandeja, consiguiendo seleccionar la bandeja con mejor comportamiento. Posteriormente se comprobará la metodología de estudio desarrollada en el modelo seleccionado, se evaluará el comportamiento térmico y lumínico, con la incorporación de algunas alternativas de bandeja. Con esta investigación se quiere demostrar que mediante la aplicación de esta metodología de estudio, es posible evaluar y seleccionar bandejas que respondan a las necesidades requeridas en distintos casos de estudio, por lo que se considera que, la bandeja puede ser un elemento arquitectónico aplicable tanto en rehabilitación como en nueva construcción, de espacios en los que sea necesario mejorar sus condiciones lumínicas y térmicas simultáneamente. ABSTRACT This thesis studies how to balance two natural events that affect the window opening of facades: daylighting and solar gain. That is to say, how to achieve optimization of natural light that gets in through the existing windows, without making a laborious intervention of replacing them and how to get protection from direct solar radiation from the glass area, to avoid unnecessary heat gain and glare affecting the light quality of the enclosures. To develop this research, it has been proposed a methodology of study divided into two phases: First phase, Analysis and Diagnostics, in which the variables with which the light shelf are evaluated will be defined along with the standards the light shelves will meet. The second phase, Assessment and Verification, in which the assessment criteria and weighting of each variable will be established. In the first phase, the physical and environmental variables shall be defined, various cities will be selected to be studied, and in each the needs of thermal comfort will be determined along with the dimensions of shading devices in the cities. In addition the actions to be taken in the window opening of the façade will be determined, depending on their position in the vertical plane. An analysis of real cases will be undertaken, which will be characterized from the luminous point of view, performing "in situ" measurements and comparing results with those obtained from simulation programs, to select places/dwellings where reality and simulation are closer, one of these places/dwellings will be a model, in the simulations to perform at the second phase. Also, in this first phase, by a neutral model, the thermal and light behavior of the size of the window opening will be studied, in which the light shelf is inserted later, the position of the light shelf in the vertical plane of the window is studied, from an ergonomic point of view. And finally to study the thermal and light behavior of the model with the light shelf located at 40, 50 and 60cm from the ceiling. In the second phase, the evaluation and weighting of the variables will be established selecting the light shelf that best balances the thermal and daylighting aspects, taking into account passive environmental conditioning strategies; such as getting solar gains in winter during daylight hours, and preventing heat loss during the night hours; and in summer implementing shading systems in the glazing area to avoid heat gains. And in both summer and winter, taking advantage of natural lighting, to improve useful illuminance and avoid glare. Once defined, the evaluation criteria and weighting will be applied to thermal and daylighting evaluation to the neutral model with the light shelf, the best performing light shelf will be selected. The study methodology developed in the selected model will be verified the thermal and daylighting performance with the addition of some light shelf alternative will also be studied. With this research, we want to show that by applying this study methodology it is possible to evaluate and select the light shelf that meets the needs required in different case studies, so it is considered that the light shelf may be an applicable architectural element in both refurbishment and new construction of spaces where necessary to improve their daylighting and thermal conditions simultaneously.

Geotechnical Analysis of Contaminated Sand by Light Non-Aquous Phase Liquids

Contaminated soil reuse was investigated, with higher profusion, throughout the early 90’s, coinciding with the 1991 Gulf War, when efforts to amend large crude oil releases began in geotechnical assessment of contaminated soils. Isolated works referring to geotechnical testing with hydrocarbon ground contaminants are described in the state-of-the-art, which have been extended to other type of contaminated soil references. Contaminated soils by light non-aquous phase liquids (LNAPL) bearing capacity reduction has been previously investigated from a forensic point of view. To date, all the research works have been published based on the assumption of constant contaminant saturation for the entire soil mass. In contrast, the actual LNAPLs distribution plumes exhibit complex flow patterns which are subject to physical and chemical changes with time and distance travelled from the release source. This aspect has been considered along the present text. A typical Madrid arkosic soil formation is commonly known as Miga sand. Geotechnical tests have been carried out, with Miga sand specimens, in incremental series of LNAPL concentrations in order to observe the soil engineering properties variation due to a contamination increase. Results are discussed in relation with previous studies and as a matter of fact, soil mechanics parameters change in the presence of LNAPL, showing different tendencies according to each test and depending on the LNAPL content, as well as to the specimen’s initially planned relative density, dense or loose. Geotechnical practical implications are also commented on and analyzed. Variation on geotechnical properties may occur only within the external contour of contamination distribution plume. This scope has motivated the author to develop a physical model based on transparent soil technology. The model aims to reproduce the distribution of LNAPL into the ground due to an accidental release from a storage facility. Preliminary results indicate that the model is a potentially complementary tool for hydrogeological applications, site-characterization and remediation treatment testing within the framework of soil pollution events. A description of the test setup of an innovative three dimensional physical model for the flow of two or more phases, in porous media, is presented herein, along with a summary of the advantages, limitations and future applications for modeling with transparent material. En los primeros años de la década de los años 90, del siglo pasado, coincidiendo con la Guerra del Golfo en 1991, se investigó intensamente sobre la reutilización de suelos afectados por grandes volúmenes de vertidos de crudo, fomentándose la evaluación geotécnica de los suelos contaminados. Se describen, en el estado del arte de esta tésis, una serie de trabajos aislados en relación con la caracterización geotécnica de suelos contaminados con hidrocarburos, descripción ampliada mediante referencias relacionadas con otros tipos de contaminación de suelos. Existen estudios previos de patología de cimentaciones que analizan la reducción de la capacidad portante de suelos contaminados por hidrocarburos líquidos ligeros en fase no acuosa (acrónimo en inglés: LNAPL de “Liquid Non-Aquous Phase Liquid”). A fecha de redacción de la tesis, todas las publicaciones anteriores estaban basadas en la consideración de una saturación del contaminante constante en toda la extensión del terreno de cimentación. La distribución real de las plumas de contaminante muestra, por el contrario, complejas trayectorias de flujo que están sujetas a cambios físico-químicos en función del tiempo y la distancia recorrida desde su origen de vertido. Éste aspecto ha sido considerado y tratado en el presente texto. La arena de Miga es una formación geológica típica de Madrid. En el ámbito de esta tesis se han desarrollado ensayos geotécnicos con series de muestras de arena de Miga contaminadas con distintas concentraciones de LNAPL con el objeto de estimar la variación de sus propiedades geotécnicas debido a un incremento de contaminación. Se ha realizado una evaluación de resultados de los ensayos en comparación con otros estudios previamente analizados, resultando que las propiedades mecánicas del suelo, efectivamente, varían en función del contenido de LNAPL y de la densidad relativa con la que se prepare la muestra, densa o floja. Se analizan y comentan las implicaciones de carácter práctico que supone la mencionada variación de propiedades geotécnicas. El autor ha desarrollado un modelo físico basado en la tecnología de suelos transparentes, considerando que las variaciones de propiedades geotécnicas únicamente deben producirse en el ámbito interior del contorno de la pluma contaminante. El objeto del modelo es el de reproducir la distribución de un LNAPL en un terreno dado, causada por el vertido accidental de una instalación de almecenamiento de combustible. Los resultados preliminares indican que el modelo podría emplearse como una herramienta complementaria para el estudio de eventos contaminantes, permitiendo el desarrollo de aplicaciones de carácter hidrogeológico, caracterización de suelos contaminados y experimentación de tratamientos de remediación. Como aportación de carácter innovadora, se presenta y describe un modelo físico tridimensional de flujo de dos o más fases a través de un medio poroso transparente, analizándose sus ventajas e inconvenientes así como sus limitaciones y futuras aplicaciones.

Contribution to the Analysis, Design and Assessment of Compact Antenna Test Ranges At Millimeter Wavelengths - Contribución al Análisis, Diseño y Caracterización de Sistemas de Medida de Antenas en Rango Compacto para Frecuencias Milimétricas

This Doctoral Thesis entitled Contribution to the analysis, design and assessment of compact antenna test ranges at millimeter wavelengths aims to deepen the knowledge of a particular antenna measurement system: the compact range, operating in the frequency bands of millimeter wavelengths. The thesis has been developed at Radiation Group (GR), an antenna laboratory which belongs to the Signals, Systems and Radiocommunications department (SSR), from Technical University of Madrid (UPM). The Radiation Group owns an extensive experience on antenna measurements, running at present four facilities which operate in different configurations: Gregorian compact antenna test range, spherical near field, planar near field and semianechoic arch system. The research work performed in line with this thesis contributes the knowledge of the first measurement configuration at higher frequencies, beyond the microwaves region where Radiation Group features customer-level performance. To reach this high level purpose, a set of scientific tasks were sequentially carried out. Those are succinctly described in the subsequent paragraphs. A first step dealed with the State of Art review. The study of scientific literature dealed with the analysis of measurement practices in compact antenna test ranges in addition with the particularities of millimeter wavelength technologies. Joint study of both fields of knowledge converged, when this measurement facilities are of interest, in a series of technological challenges which become serious bottlenecks at different stages: analysis, design and assessment. Thirdly after the overview study, focus was set on Electromagnetic analysis algorithms. These formulations allow to approach certain electromagnetic features of interest, such as field distribution phase or stray signal analysis of particular structures when they interact with electromagnetic waves sources. Properly operated, a CATR facility features electromagnetic waves collimation optics which are large, in terms of wavelengths. Accordingly, the electromagnetic analysis tasks introduce an extense number of mathematic unknowns which grow with frequency, following different polynomic order laws depending on the used algorithmia. In particular, the optics configuration which was of our interest consisted on the reflection type serrated edge collimator. The analysis of these devices requires a flexible handling of almost arbitrary scattering geometries, becoming this flexibility the nucleus of the algorithmia’s ability to perform the subsequent design tasks. This thesis’ contribution to this field of knowledge consisted on reaching a formulation which was powerful at the same time when dealing with various analysis geometries and computationally speaking. Two algorithmia were developed. While based on the same principle of hybridization, they reached different order Physics performance at the cost of the computational efficiency. Inter-comparison of their CATR design capabilities was performed, reaching both qualitative as well as quantitative conclusions on their scope. In third place, interest was shifted from analysis - design tasks towards range assessment. Millimetre wavelengths imply strict mechanical tolerances and fine setup adjustment. In addition, the large number of unknowns issue already faced in the analysis stage appears as well in the on chamber field probing stage. Natural decrease of dynamic range available by semiconductor millimeter waves sources requires in addition larger integration times at each probing point. These peculiarities increase exponentially the difficulty of performing assessment processes in CATR facilities beyond microwaves. The bottleneck becomes so tight that it compromises the range characterization beyond a certain limit frequency which typically lies on the lowest segment of millimeter wavelength frequencies. However the value of range assessment moves, on the contrary, towards the highest segment. This thesis contributes this technological scenario developing quiet zone probing techniques which achieves substantial data reduction ratii. Collaterally, it increases the robustness of the results to noise, which is a virtual rise of the setup’s available dynamic range. In fourth place, the environmental sensitivity of millimeter wavelengths issue was approached. It is well known the drifts of electromagnetic experiments due to the dependance of the re sults with respect to the surrounding environment. This feature relegates many industrial practices of microwave frequencies to the experimental stage, at millimeter wavelengths. In particular, evolution of the atmosphere within acceptable conditioning bounds redounds in drift phenomena which completely mask the experimental results. The contribution of this thesis on this aspect consists on modeling electrically the indoor atmosphere existing in a CATR, as a function of environmental variables which affect the range’s performance. A simple model was developed, being able to handle high level phenomena, such as feed - probe phase drift as a function of low level magnitudes easy to be sampled: relative humidity and temperature. With this model, environmental compensation can be performed and chamber conditioning is automatically extended towards higher frequencies. Therefore, the purpose of this thesis is to go further into the knowledge of millimetre wavelengths involving compact antenna test ranges. This knowledge is dosified through the sequential stages of a CATR conception, form early low level electromagnetic analysis towards the assessment of an operative facility, stages for each one of which nowadays bottleneck phenomena exist and seriously compromise the antenna measurement practices at millimeter wavelengths.

Comparison of methods for the analysis of Phase Sensitivity Inversion Recovery Images in the Assessment of Myocardial Infarction

Métodos estadísticos para análisis de MRI PSIR

Implications of biofuel support policies in Europe - a quantitative analysis in an open economy

EU biofuels support Biofuels modelling with CAPRI Scenario setting Main results Concluding remarks Biofuels production and use will remain mainly driven by public support Strong links of biofuels to agricultural markets Development of second generation technologies would ease food-fuel links

Analysis and optimized design of a distributed multi-stage EMC filter for an interleaved three-phase PWM-rectifier system for aircraft applications

Different possible input filter configurations for a modular three-phase PWM rectifier system consisting of three interleaved converter cells are studied. The system is designed for an aircraft application where MIL-STD-461E conducted EMI standards have to be met and system weight is a critical design issue. The importance of a LISN model on the simulated noise levels and the effect of interleaving and power unbalance between the different converter modules is discussed. The effect of the number of filter stages and the degree of distribution of the filter stages among the individual converter modules on the weight and losses of the input filter is studied and optimal filter structures are proposed.

Optimización de la composición del hueco de fachada en materia de eficiencia energética. Propuesta de indicador como herramienta para el análisis integral del elemento acristalado = Energy performance optimization of window systems. Proposal of an indicator as a tool for an integrated analysis of glazing

La hipótesis de esta tesis es: "La optimización de la ventana considerando simultáneamente aspectos energéticos y aspectos relativos a la calidad ambiental interior (confort higrotérmico, lumínico y acústico) es compatible, siempre que se conozcan y consideren las sinergias existentes entre ellos desde las primeras fases de diseño". En la actualidad se desconocen las implicaciones de muchas de las decisiones tomadas en torno a la ventana; para que su eficiencia en relación a todos los aspectos mencionados pueda hacerse efectiva es necesaria una herramienta que aporte más información de la actualmente disponible en el proceso de diseño, permitiendo así la optimización integral, en función de las circunstancias específicas de cada proyecto. En la fase inicial de esta investigación se realiza un primer acercamiento al tema, a través del estado del arte de la ventana; analizando la normativa existente, los componentes, las prestaciones, los elementos experimentales y la investigación. Se observa que, en ocasiones, altos requisitos de eficiencia energética pueden suponer una disminución de las prestaciones del sistema en relación con la calidad ambiental interior, por lo que surge el interés por integrar al análisis energético aspectos relativos a la calidad ambiental interior, como son las prestaciones lumínicas y acústicas y la renovación de aire. En este punto se detecta la necesidad de realizar un estudio integral que incorpore los distintos aspectos y evaluar las sinergias que se dan entre las distintas prestaciones que cumple la ventana. Además, del análisis de las soluciones innovadoras y experimentales se observa la dificultad de determinar en qué medida dichas soluciones son eficientes, ya que son soluciones complejas, no caracterizadas y que no están incorporadas en las metodologías de cálculo o en las bases de datos de los programas de simulación. Por lo tanto, se plantea una segunda necesidad, generar una metodología experimental para llevar a cabo la caracterización y el análisis de la eficiencia de sistemas innovadores. Para abordar esta doble necesidad se plantea la optimización mediante una evaluación del elemento acristalado que integre la eficiencia energética y la calidad ambiental interior, combinando la investigación teórica y la investigación experimental. En el ámbito teórico, se realizan simulaciones, cálculos y recopilación de información de distintas tipologías de hueco, en relación con cada prestación de forma independiente (acústica, iluminación, ventilación). A pesar de haber partido con un enfoque integrador, resulta difícil esa integración detectándose una carencia de herramientas disponible. En el ámbito experimental se desarrolla una metodología para la evaluación del rendimiento y de aspectos ambientales de aplicación a elementos innovadores de difícil valoración mediante la metodología teórica. Esta evaluación consiste en el análisis comparativo experimental entre el elemento innovador y un elemento estándar; para llevar a cabo este análisis se han diseñado dos espacios iguales, que denominamos módulos de experimentación, en los que se han incorporado los dos sistemas; estos espacios se han monitorizado, obteniéndose datos de consumo, temperatura, iluminancia y humedad relativa. Se ha realizado una medición durante un periodo de nueve meses y se han analizado y comparado los resultados, obteniendo así el comportamiento real del sistema. Tras el análisis teórico y el experimental, y como consecuencia de esa necesidad de integrar el conocimiento existente se propone una herramienta de evaluación integral del elemento acristalado. El desarrollo de esta herramienta se realiza en base al procedimiento de diagnóstico de calidad ambiental interior (CAI) de acuerdo con la norma UNE 171330 “Calidad ambiental en interiores”, incorporando el factor de eficiencia energética. De la primera parte del proceso, la parte teórica y el estado del arte, se obtendrán los parámetros que son determinantes y los valores de referencia de dichos parámetros. En base a los parámetros relevantes obtenidos se da forma a la herramienta, que consiste en un indicador de producto para ventanas que integra todos los factores analizados y que se desarrolla según la Norma UNE 21929 “Sostenibilidad en construcción de edificios. Indicadores de sostenibilidad”. ABSTRACT The hypothesis of this thesis is: "The optimization of windows considering energy and indoor environmental quality issues simultaneously (hydrothermal comfort, lighting comfort, and acoustic comfort) is compatible, provided that the synergies between these issues are known and considered from the early stages of design ". The implications of many of the decisions made on this item are currently unclear. So that savings can be made, an effective tool is needed to provide more information during the design process than the currently available, thus enabling optimization of the system according to the specific circumstances of each project. The initial phase deals with the study from an energy efficiency point of view, performing a qualitative and quantitative analysis of commercial, innovative and experimental windows. It is observed that sometimes, high-energy efficiency requirements may mean a reduction in the system's performance in relation to user comfort and health, that's why there is an interest in performing an integrated analysis of indoor environment aspects and energy efficiency. At this point a need for a comprehensive study incorporating the different aspects is detected, to evaluate the synergies that exist between the various benefits that meet the window. Moreover, from the analysis of experimental and innovative windows, a difficulty in establishing to what extent these solutions are efficient is observed; therefore, there is a need to generate a methodology for performing the analysis of the efficiency of the systems. Therefore, a second need arises, to generate an experimental methodology to perform characterization and analysis of the efficiency of innovative systems. To address this dual need, the optimization of windows by an integrated evaluation arises, considering energy efficiency and indoor environmental quality, combining theoretical and experimental research. In the theoretical field, simulations and calculations are performed; also information about the different aspects of indoor environment (acoustics, lighting, ventilation) is gathered independently. Despite having started with an integrative approach, this integration is difficult detecting lack available tools. In the experimental field, a methodology for evaluating energy efficiency and indoor environment quality is developed, to be implemented in innovative elements which are difficult to evaluate using a theoretical methodology This evaluation is an experimental comparative analysis between an innovative element and a standard element. To carry out this analysis, two equal spaces, called experimental cells, have been designed. These cells have been monitored, obtaining consumption, temperature, luminance and relative humidity data. Measurement has been performed during nine months and results have been analyzed and compared, obtaining results of actual system behavior. To advance this optimization, windows have been studied from the point of view of energy performance and performance in relation to user comfort and health: thermal comfort, acoustic comfort, lighting comfort and air quality; proposing the development of a methodology for an integrated analysis including energy efficiency and indoor environment quality. After theoretical and experimental analysis and as a result of the need to integrate existing knowledge, a comprehensive evaluation procedure for windows is proposed. This evaluation procedure is developed according to the UNE 171330 "Indoor Environmental Quality", also incorporating energy efficiency and cost as factors to evaluate. From the first part of the research process, outstanding parameters are chosen and reference values of these parameters are set. Finally, based on the parameters obtained, an indicator is proposed as windows product indicator. The indicator integrates all factors analyzed and is developed according to ISO 21929-1:2011"Sustainability in building construction. Sustainability indicators. Part 1: Framework for the development of indicators and a core set of indicators for buildings".

3-Phase Rectifier System with very demanding dynamic load: Architecture analysis and control strategy

A distributed power architecture for aerospace application with very restrictive specifications is analyzed. Parameters as volume, weight and losses are analyzed for the considered power architectures. In order to protect the 3 phase generator against high load steps, an intermediate bus (based in a high capacitance) to provide energy to the loads during the high load steps is included. Prototypes of the selected architecture for the rectifier and EMI filter are built and the energy control is validated.

Quantitative analysis of morphological changes in yeast colonies growing on solid medium: the eccentricity and Fourier indices

The colony shape of four yeast species growing on agar medium wasmeasured for 116 days by image analysis. Initially, all the colonies are circular, with regular edges. The loss of circularity can be quantitatively estimated by the eccentricity index, Ei, calculated as the ratio between their orthogonal vertical and horizontal diameters. Ei can increase from 1 (complete circularity) to a maximum of 1.17–1.30, depending on the species. One colony inhibits its neighbour only when it has reached a threshold area. Then, Ei of the inhibited colony increases proportionally to the area of the inhibitory colony. The initial distance between colonies affects those threshold values but not the proportionality, Ei/area; this inhibition affects the shape but not the total surface of the colony. The appearance of irregularities in the edges is associated, in all the species, not with age but with nutrient exhaustion. The edge irregularity can be quantified by the Fourier index, Fi, calculated by the minimum number of Fourier coefficients that are needed to describe the colony contour with 99% fitness. An ad hoc function has been developed in Matlab v. 7.0 to automate the computation of the Fourier coefficients. In young colonies, Fi has a value between 2 (circumference) and 3 (ellipse). These values are maintained in mature colonies of Debaryomyces, but can reach values up to 14 in Saccharomyces.All the species studied showed the inhibition of growth in facing colony edges, but only three species showed edge irregularities associated with substrate exhaustion. Copyright © 2014 John Wiley & Sons, Ltd.