Modelo multifactorial para optimización de la productividad en el proceso de generación de energía eléctrica : aplicación al caso de las centrales hidroeléctricas venezolanas

Las organizaciones son sistemas o unidades sociales, compuestas por personas que interactúan entre sí, para lograr objetivos comunes. Uno de sus objetivos es la productividad. La productividad es un constructo multidimensional en la que influyen aspectos tecnológicos, económicos, organizacionales y humanos. Diversos estudios apoyan la influencia de la motivación de las personas, de las habilidades y destrezas de los individuos, de su talento para desempeñar el trabajo, así como también del ambiente de trabajo presente en la organización, en la productividad. Por esta razón, el objetivo general de la investigación, es analizar la influencia entre los factores humanos y la productividad. Se hará énfasis en la persona como factor productivo clave, para responder a las interrogantes de la investigación, referidas a cuáles son las variables humanas que inciden en la productividad, a la posibilidad de plantear un modelo de productividad que considere el impacto del factor humano y la posibilidad de encontrar un método para la medición de la productividad que contemple la percepción del factor humano. Para resolver estas interrogantes, en esta investigación se busca establecer las relaciones entre las variables humanas y la productividad, vistas desde la perspectiva de tres unidades de análisis diferentes: individuo, grupo y organización, para la formulación de un modelo de productividad humana y el diseño de un instrumento para su medida. Una de las principales fuente de investigación para la elección de las variables humanas, la formulación del modelo, y el método de medición de la productividad, fue la revisión de la literatura disponible sobre la productividad y el factor humano en las organizaciones, lo que facilitó el trazado del marco teórico y conceptual. Otra de las fuentes para la selección fue la opinión de expertos y de especialistas directamente involucrados en el sector eléctrico venezolano, lo cual facilitó la obtención de un modelo, cuyas variables reflejasen la realidad del ámbito en estudio. Para aportar una interpretación explicativa del fenómeno, se planteó el modelo de los Factores Humanos vs Productividad (MFHP), el cual se analizó desde la perspectiva del análisis causal y fue conformado por tres variables latentes exógenas denominadas: factores individuales, factores grupales y factores organizacionales, que estaban relacionadas con una variable latente endógena denominada productividad. El MFHP se formuló mediante la metodología de los modelos de ecuaciones estructurales (SEM). Las relaciones inicialmente propuestas entre las variables latentes fueron corroboradas por los ajustes globales del modelo, se constataron las relaciones entre las variables latentes planteadas y sus indicadores asociados, lo que facilitó el enunciado de 26 hipótesis, de las cuales se comprobaron 24. El modelo fue validado mediante la estrategia de modelos rivales, utilizada para comparar varios modelos SEM, y seleccionar el de mejor ajuste, con sustento teórico. La aceptación del modelo se realizó mediante la evaluación conjunta de los índices de bondad de ajuste globales. Asimismo, para la elaboración del instrumento de medida de la productividad (IMPH), se realizó un análisis factorial exploratorio previo a la aplicación del análisis factorial confirmatorio, aplicando SEM. La revisión de los conceptos de productividad, la incidencia del factor humano, y sus métodos de medición, condujeron al planteamiento de métodos subjetivos que incorporaron la percepción de los principales actores del proceso productivo, tanto para la selección de las variables, como para la formulación de un modelo de productividad y el diseño de un instrumento de medición de la productividad. La contribución metodológica de este trabajo de investigación, ha sido el empleo de los SEM para relacionar variables que tienen que ver con el comportamiento humano en la organización y la productividad, lo cual abre nuevas posibilidades a la investigación en este ámbito. Organizations are social systems or units composed of people who interact with each other to achieve common goals. One objective is productivity, which is a multidimensional construct influenced by technological, economic, organizational and human aspects. Several studies support the influence on productivity of personal motivation, of the skills and abilities of individuals, of their talent for the job, as well as of the work environment present in the organization. Therefore, the overall objective of this research is to analyze the influence between human factors and productivity. The emphasis is on the individual as a productive factor which is key in order to answer the research questions concerning the human variables that affect productivity and to address the ability to propose a productivity model that considers the impact of the human factor and the possibility of finding a method for the measurement of productivity that includes the perception of the human factor. To consider these questions, this research seeks to establish the relationships between human and productivity variables, as seen from the perspective of three different units of analysis: the individual, the group and the organization, in order to formulate a model of human productivity and to design an instrument for its measurement. A major source of research for choosing the human variables, model formulation, and method of measuring productivity, was the review of the available literature on productivity and the human factor in organizations which facilitated the design of the theoretical and conceptual framework. Another source for the selection was the opinion of experts and specialists directly involved in the Venezuelan electricity sector which facilitated obtaining a model whose variables reflect the reality of the area under study. To provide an interpretation explaining the phenomenon, the model of the Human Factors vs. Productivity Model (HFPM) was proposed. This model has been analyzed from the perspective of causal analysis and was composed of three latent exogenous variables denominated: individual, group and organizational factors which are related to a latent variable denominated endogenous productivity. The HFPM was formulated using the methodology of Structural Equation Modeling (SEM). The initially proposed relationships between latent variables were confirmed by the global fits of the model, the relationships between the latent variables and their associated indicators enable the statement of 26 hypotheses, of which 24 were confirmed. The model was validated using the strategy of rival models, used for comparing various SEM models and to select the one that provides the best fit, with theoretical support. The acceptance of the model was performed through the joint evaluation of the adequacy of global fit indices. Additionally, for the development of an instrument to measure productivity, an exploratory factor analysis was performed prior to the application of a confirmatory factor analysis, using SEM. The review of the concepts of productivity, the impact of the human factor, and the measurement methods led to a subjective methods approach that incorporated the perception of the main actors of the production process, both for the selection of variables and for the formulation of a productivity model and the design of an instrument to measure productivity. The methodological contribution of this research has been the use of SEM to relate variables that have to do with human behavior in the organization and with productivity, opening new possibilities for research in this area.

A proposal for improving safety in construction projects by strengthening coordinators’ competencies in health and safety issues

The figure of the coordinator in health and safety issues in the construction sector first appeared in our legislation through the incorporation of the European Directives (in our case Royal Decree 1627/97 on the minimum health and safety regulations in construction works), and is viewed differently in different countries of the European Union regarding the way they are hired and their role in the construction industry. Coordinating health and safety issues is also a management process that requires certain competencies that are not only based on technical or professional training, but which, taking account of the work environment, require the use of strategies and tools that are related to experience and personal skills. Through a piece of research that took account of expert opinions in the matter, we have found which competencies need to be possessed by the health and safety coordinator in order to improve the safety in the works they are coordinating. The conclusions of the analyses performed using the appropriate statistical methods (comparing means and multivariate analysis techniques), will enable training programmes to be designed and ensure that the health and safety coordinators selected have the competencies required to carry out their duties.

A proposal for improving safety in construction projects by strengthening coordinators’ competencies in health and safety issues

The figure of the coordinator in health and safety issues in the construction sector first appeared in our legislation through the incorporation of the European Directives (in our case Royal Decree 1627/97 on the minimum health and safety regulations in construction works), and is viewed differently in different countries of the European Union regarding the way they are hired and their role in the construction industry. Coordinating health and safety issues is also a management process that requires certain competencies that are not only based on technical or professional training, but which, taking account of the work environment, require the use of strategies and tools that are related to experience and personal skills. Through a piece of research that took account of expert opinions in the matter, we have found which competencies need to be possessed by the health and safety coordinator in order to improve the safety in the works they are coordinating. The conclusions of the analyses performed using the appropriate statistical methods (comparing means and multivariate analysis techniques), will enable training programmes to be designed and ensure that the health and safety coordinators selected have the competencies required to carry out their duties.

Modelo para la certificación del coordinador en materia de seguridad y salud basado en sus competencias

La figura del coordinador en materia de seguridad y salud en el sector de la construcción, aparecida en nuestra legislación a través de las trasposiciones de las Directivas Europeas, (en nuestro caso en el RD 1627/97 sobre disposiciones mínimas de seguridad y salud en las obras de construcción), se encuentra identificada, en cuanto a su posible contratación y actuación dentro de este sector, de forma diferente en distintos países de la Unión Europea. La coordinación en materia de seguridad y salud también es un proceso de gestión que requiere de unas competencias, no solamente basadas en la formación técnica o profesional, si no que, considerando el entorno de trabajo, precisan de la aplicación de estrategias y herramientas relacionadas con la experiencia y con las habilidades personales. A través de una primera fase de investigación realizada y considerando la opinión de expertos en la materia, se han detectado cuáles son estas competencias que debe poseer el coordinador en materia de seguridad y salud para fortalecer el cumplimiento de sus obligaciones y así, mejorar su actividad de coordinación. El resultado de los análisis realizados permitirá construir un modelo que sirva de referencia para la certificación de los coordinadores en materia de seguridad y salud basado en sus competencias. Las conclusiones recogidas en esta Tesis doctoral proporcionarán criterios para establecer el diseño de programas formativos y construir metodologías para la selección de los coordinadores en materia de seguridad y salud en base a sus competencias. ABSTRACT The figure of the health and safety coordinator in the construction sector appeared in our legislation through the incorporation of the European Directives. In our case, Royal Decree 1627/97 on the minimum health and safety regulations in construction works. This figure is viewed differently, in terms of recruitment and performance, in different countries of the European Union. The coordination of health and safety issues is a management process that requires certain competencies not only based on technical or professional training. It is also necessary, depending on the work environment, the implementation of strategies and tools that are related to experience and personal skills. The skill requirements for the health and safety coordinator have been defined considering the opinion of experts in this field, gained through the realization of a first phase of research. These competences should be used to strengthen the performance of their duties and thereby improve their coordination activity.

Diseño y análisis de unidades didácticas para Procesado Digital de la Señal.

Este Proyecto Fin de Carrera pretende desarrollar una serie de unidades didácticas orientadas a mejorar el aprendizaje de la teoría de procesado digital de señales a través de la aplicación práctica. Con tal fin, se han diseñado una serie de prácticas que permitan al alumno alcanzar un apropiado nivel de conocimiento de la asignatura, la adquisición de competencias y alcanzar los resultados de aprendizaje previstos. Para desarrollar el proyecto primero se ha realizado una selección apropiada de los contenidos de la teoría de procesado digital de señales en relación con los resultados de aprendizaje esperados, seguidamente se han diseñado y validado unas prácticas basadas en un entorno de trabajo basado en MATLAB y DSP, y por último se ha redactado un manual de laboratorio que combina una parte teórica con su práctica correspondiente. El objetivo perseguido con la realización de estas prácticas es alcanzar un equilibrio teórico/práctico que permita sacar el máximo rendimiento de la asignatura desde el laboratorio, trabajando principalmente con el IDE Code Composer Studio junto con un kit de desarrollo basado en un DSP. ABSTRACT. This dissertation intends to develop some lessons oriented to improve about the digital signal processing theory. In order to get this objective some practices have been developed to allow to the students to achieve an appropriate level of knowledge of the subject, acquire skills and achieve the intended learning outcomes. To develop the project firstly it has been made an appropriate selection of the contents of the digital signal processing theory related with the expected results. After that, five practices based in a work environment based on Matlab and DSP have been designed and validated, and finally a laboratory manual has been drafted that combines the theoretical part with its corresponding practice. The objective with the implementation of these practices is to achieve a theoretical / practical balance to get the highest performance to the subject from the laboratory working mainly with the Code Composer Studio IDE together a development kit based on DSP.

Introducción de las plataformas tecnológicas 2.0 y la innovación abierta en la estrategia empresarial: estudio del sector de componentes electrónicos

Este proyecto se encuadra dentro de los estudios de impacto que están produciendo en las empresas el desarrollo e incorporación de las nuevas tecnologías, y más concretamente la implantación de las aplicaciones provenientes de la denominada web 2.0. Se conoce con este nombre a las herramientas web que permiten una comunicación bidireccional, es decir, el usuario y la empresa pueden intercambiar opiniones, de manera que el usuario adquiere un nuevo papel más protagonista, presentando ideas, aclaraciones, gustos, críticas...que son tenidas en cuenta por la empresa para realizar su actividad. De esta manera se ha roto con el modelo anterior donde el usuario solo podía consultar la información de una página web, era simple receptor de la información. El objetivo de este estudio es conocer cómo las empresas están incorporando estas tecnologías 2.0 a su estrategia empresarial, y cómo términos como innovación abierta o co-creación están tomando mayor importancia en el entorno empresarial gracias a estas nuevas tecnologías. Si bien existen estudios a nivel de consultoría que generalmente aportan información sobre cuáles son las plataformas 2.0 más utilizadas en el mundo empresarial, no se han encontrado hasta ahora estudios que vinculen estas plataformas entre ellas y con la estructura empresarial, para poder definir un perfil de la organización que trabaja con ellas o el nivel de madurez de la incorporación de estas tecnologías en las organizaciones. Analizar cualitativamente estos aspectos, significa estudiar los nuevos conceptos incorporados a las tecnologías 2.0 en la empresa. Un análisis cuantitativo nos llevaría a estudiar de manera práctica que tipo de recursos y en qué cantidad se están utilizando y su vinculación con la estructura de la organización. Para ello: En una primera parte, nos centraremos en las diferentes formas en las que se puede acceder a Internet, y a continuación enfocaremos el estudio en los dispositivos móviles que nos permiten la conexión desde cualquier lugar y en cualquier instante. Con esto conseguiremos tener una situación actual del mercado de las TIC y veremos cómo las empresas han ido construyendo nuevas políticas para cambiar su estrategia con el fin de estar presentes en los nuevos dispositivos móviles y no perder cuota de mercado. Tras ello, veremos porqué conceptos como el de innovación abierta y proceso de co-creación han sido posibles gracias a la implantación de las tecnologías 2.0 en el ámbito empresarial, facilitando que la empresa y el usuario final cooperen y vayan de la mano en una misma dirección; la empresa se surte de las aportaciones que los usuarios ofrecen, y por otra parte el usuario se siente valorado por la empresa para conseguir la meta final. Es aquí donde comprobaremos la transformación que ha sufrido la empresa en sus distintos sectores departamentales (marketing, ventas, recursos humanos y atención al cliente) como consecuencia de la incorporación de las herramientas 2.0 al mundo laboral. Por todo ello, se enumerarán los distintos usos que realizan las empresas de las redes social más habituales, y además se describirán las principales herramientas y/o aplicaciones para monitorizar las redes sociales que servirán a la empresa para hacer un seguimiento de las mismas. La segunda parte del proyecto será un caso práctico y servirá para ofrecer una visión más real del estado actual de las empresas y su relación con las redes sociales. Para la recopilación de los datos se han escogido las empresas que pertenecen al sector de la “Fabricación de productos informáticos, electrónicos y ópticos”. En cuento a las redes sociales elegidas, han sido Facebook y Twitter. Este estudio práctico nos hará entender mejor el impacto directo que tienen las redes sociales en la actividad diaria de las empresas. Finalmente se realizarán una serie de consideraciones a modo de directrices que servirán para tratar de entender cómo se están utilizando las redes sociales en el entorno empresarial y cuál puede ser la manera más óptima de utilizarlas según el estudio presentado. ABSTRACT. This project is part of the impact studies arisen in companies by the development and incorporation of new technologies and, specifically, by the implementation of applications from the so-called web 2.0. That is how we call the web tools that allow bidirectional communication, this is, user and company can exchange opinions, in such a way that users acquire a leading role, submitting ideas, explanations, preferences, criticism... considered by the company when performing its activities. This way, we have broken with the previous model, where users could only check information from a web page and were simple information recipients. The objective of this study is to get to know how companies are incorporating these technologies 2.0 to their business strategy and how terms such as open innovation or co-creation are becoming more important in the business sphere thanks to these new technologies. Even if there are consulting studies that generally provide information about which are the platforms 2.0 more used in the business world, no studies have been found until now that link such platforms among them and with the business structure, in order to define a profile of the organization that works with them or the level of development of the incorporation of these technologies in the organizations. A qualitative analysis of these aspects involves studying the new concepts incorporated to technologies 2.0 by companies. A qualitative analysis would lead us to study in a practical manner what kind of resources and what amount are being used and their relation with the organization structure. Therefore: First, we will focus on the different ways to gain access to the Internet and, afterwards, we will focus the study on mobile devices that allow us to be connected everywhere any time. This way, we will manage to obtain a present situation of the ICT market and we will see how companies have constructed new policies to change their strategy in order to be present in the new mobile devices without losing their market share. Later, we will review why concepts such as open innovation and co-creation process have been possible thanks to the implementation of technologies 2.0 in the business environment, facilitating that companies and final users cooperate and walk hand in hand in the same direction; companies stock up on the contributions offered by users and, on the other hand, users feel appreciated by companies in the achievement of the final goal. Here we will confirm the transformation suffering by companies in different department sectors (marketing, sales, human resources and customer service) as a result of the incorporation of tools 2.0 to the work environment. Therefore, we will enumerate the different uses that companies make of the most common social networks, describing the main tools and/or applications to monitor social networks used by companies to follow them up. The second part of the project will be a case study to offer a more real vision of the present status of companies and their relation with social networks. To collect the data, we have selected companies from the “Manufacture of computer, electronic and optical products” industry. The social networks chosen are Facebook and Twitter. This case study will help us to get a better understanding of the direct impact of social networks in companies’ daily activity. Finally, we will offer a series of considerations and guidelines to try to understand how are social networks being used in the business environment and what can be the most suitable manner to use them according to this study.

Occupational allergic multiorgan disease induced by wheat flour

Bakers are repeatedly exposed to wheat flour (WF) and may develop sensitization and occupational rhinoconjunctivitis and/or asthma to WF allergens.1 Several wheat proteins have been identified as causative allergens of occupational respiratory allergy in bakery workers.1 Testing of IgE reactivity in patients with different clinical profiles of wheat allergy (food allergy, wheat-dependent exercise-induced anaphylaxis, and baker's asthma) to salt-soluble and salt-insoluble protein fractions from WF revealed a high degree of heterogeneity in the recognized allergens. However, mainly salt-soluble proteins (albumins, globulins) seem to be associated with baker's asthma, and prolamins (gliadins, glutenins) with wheat-dependent exercise-induced anaphylaxis, whereas both protein fractions reacted to IgE from food-allergic patients.1 Notwithstanding, gliadins have also been incriminated as causative allergens in baker's asthma.2 We report on a 31-year-old woman who had been exposed to WF practically since birth because her family owned a bakery housed in the same home where they lived. She moved from this house when she was 25 years, but she continued working every day in the family bakery. In the last 8 years she had suffered from work-related nasal and ocular symptoms such as itching, watery eyes, sneezing, nasal stuffiness, and rhinorrhea. These symptoms markedly improved when away from work and worsened at work. In the last 5 years, she had also experienced dysphagia with frequent choking, especially when ingesting meats or cephalopods, which had partially improved with omeprazole therapy. Two years before referral to our clinic, she began to have dry cough and breathlessness, which she also attributed to her work environment. Upper and lower respiratory tract symptoms increased when sifting the WF and making the dough. The patient did not experience gastrointestinal symptoms with ingestion of cereal products. Skin prick test results were positive to grass (mean wheal, 6 mm), cypress (5 mm) and Russian thistle pollen (4 mm), WF (4 mm), and peach lipid transfer protein (6 mm) and were negative to rice flour, corn flour, profilin, mites, molds, and animal dander. Skin prick test with a homemade WF extract (10% wt/vol) was strongly positive (15 mm). Serologic tests yielded the following results: eosinophil cationic protein, 47 ?g/L; total serum IgE, 74 kU/L; specific IgE (ImmunoCAP; ThermoFisher, Uppsala, Sweden) to WF, 7.4 kU/L; barley flour, 1.24 kU/L; and corn, gluten, alpha-amylase, peach, and apple, less than 0.35 kU/L. Specific IgE binding to microarrayed purified WF allergens (WDAI-0.19, WDAI-0.53, WTAI-CM1, WTAI-CM2, WTAI-CM3, WTAI-CM16, WTAI-CM17, Tri a 14, profilin, ?-5-gliadin, Tri a Bd 36 and Tri a TLP, and gliadin and glutamine fractions) was assessed as described elsewhere.3 The patient's serum specifically recognized ?-5-gliadin and the gliadin fraction, and no IgE reactivity was observed to other wheat allergens. Spirometry revealed a forced vital capacity of 3.88 L (88%), an FEV1 of 3.04 L (87%), and FEV1/forced vital capacity of 83%. A methacholine inhalation test was performed following an abbreviated protocol,4 and the results were expressed as PD20 in cumulative dose (mg) of methacholine. Methacholine inhalation challenge test result was positive (0.24 mg cumulative dose) when she was working, and after a 3-month period away from work and with no visits to the bakery house, it gave a negative result. A chest x-ray was normal. Specific inhalation challenge test was carried out in the hospital laboratory by tipping WF from one tray to another for 15 minutes. Spirometry was performed at baseline and at 2, 5, 10, 15, 20, 30, 45, and 60 minutes after the challenge with WF. Peak expiratory flow was measured at baseline and then hourly over 24 hours (respecting sleeping time). A 12% fall in FEV1 was observed at 20 minutes and a 26% drop in peak expiratory flow at 9 hours after exposure to WF,

Modelling the Impact of Built Environment, Geographical Scales and Latent Constructs On Individual Travel Behaviour

La relación entre la estructura urbana y la movilidad ha sido estudiada desde hace más de 70 años. El entorno urbano incluye múltiples dimensiones como por ejemplo: la estructura urbana, los usos de suelo, la distribución de instalaciones diversas (comercios, escuelas y zonas de restauración, parking, etc.). Al realizar una revisión de la literatura existente en este contexto, se encuentran distintos análisis, metodologías, escalas geográficas y dimensiones, tanto de la movilidad como de la estructura urbana. En este sentido, se trata de una relación muy estudiada pero muy compleja, sobre la que no existe hasta el momento un consenso sobre qué dimensión del entorno urbano influye sobre qué dimensión de la movilidad, y cuál es la manera apropiada de representar esta relación. Con el propósito de contestar estas preguntas investigación, la presente tesis tiene los siguientes objetivos generales: (1) Contribuir al mejor entendimiento de la compleja relación estructura urbana y movilidad. y (2) Entender el rol de los atributos latentes en la relación entorno urbano y movilidad. El objetivo específico de la tesis es analizar la influencia del entorno urbano sobre dos dimensiones de la movilidad: número de viajes y tipo de tour. Vista la complejidad de la relación entorno urbano y movilidad, se pretende contribuir al mejor entendimiento de la relación a través de la utilización de 3 escalas geográficas de las variables y del análisis de la influencia de efectos inobservados en la movilidad. Para el análisis se utiliza una base de datos conformada por tres tipos de datos: (1) Una encuesta de movilidad realizada durante los años 2006 y 2007. Se obtuvo un total de 943 encuestas, en 3 barrios de Madrid: Chamberí, Pozuelo y Algete. (2) Información municipal del Instituto Nacional de Estadística: dicha información se encuentra enlazada con los orígenes y destinos de los viajes recogidos en la encuesta. Y (3) Información georeferenciada en Arc-GIS de los hogares participantes en la encuesta: la base de datos contiene información respecto a la estructura de las calles, localización de escuelas, parking, centros médicos y lugares de restauración. Se analizó la correlación entre e intra-grupos y se modelizaron 4 casos de atributos bajo la estructura ordinal logit. Posteriormente se evalúa la auto-selección a través de la estimación conjunta de las elecciones de tipo de barrio y número de viajes. La elección del tipo de barrio consta de 3 alternativas: CBD, Urban y Suburban, según la zona de residencia recogida en las encuestas. Mientras que la elección del número de viajes consta de 4 categorías ordinales: 0 viajes, 1-2 viajes, 3-4 viajes y 5 o más viajes. A partir de la mejor especificación del modelo ordinal logit. Se desarrolló un modelo joint mixed-ordinal conjunto. Los resultados indican que las variables exógenas requieren un análisis exhaustivo de correlaciones con el fin de evitar resultados sesgados. ha determinado que es importante medir los atributos del BE donde se realiza el viaje, pero también la información municipal es muy explicativa de la movilidad individual. Por tanto, la percepción de las zonas de destino a nivel municipal es considerada importante. En el contexto de la Auto-selección (self-selection) es importante modelizar conjuntamente las decisiones. La Auto-selección existe, puesto que los parámetros estimados conjuntamente son significativos. Sin embargo, sólo ciertos atributos del entorno urbano son igualmente importantes sobre la elección de la zona de residencia y frecuencia de viajes. Para analizar la Propensión al Viaje, se desarrolló un modelo híbrido, formado por: una variable latente, un indicador y un modelo de elección discreta. La variable latente se denomina “Propensión al Viaje”, cuyo indicador en ecuación de medida es el número de viajes; la elección discreta es el tipo de tour. El modelo de elección consiste en 5 alternativas, según la jerarquía de actividades establecida en la tesis: HOME, no realiza viajes durante el día de estudio, HWH tour cuya actividad principal es el trabajo o estudios, y no se realizan paradas intermedias; HWHs tour si el individuo reaiza paradas intermedias; HOH tour cuya actividad principal es distinta a trabajo y estudios, y no se realizan paradas intermedias; HOHs donde se realizan paradas intermedias. Para llegar a la mejor especificación del modelo, se realizó un trabajo importante considerando diferentes estructuras de modelos y tres tipos de estimaciones. De tal manera, se obtuvieron parámetros consistentes y eficientes. Los resultados muestran que la modelización de los tours, representa una ventaja sobre la modelización de los viajes, puesto que supera las limitaciones de espacio y tiempo, enlazando los viajes realizados por la misma persona en el día de estudio. La propensión al viaje (PT) existe y es específica para cada tipo de tour. Los parámetros estimados en el modelo híbrido resultaron significativos y distintos para cada alternativa de tipo de tour. Por último, en la tesis se verifica que los modelos híbridos representan una mejora sobre los modelos tradicionales de elección discreta, dando como resultado parámetros consistentes y más robustos. En cuanto a políticas de transporte, se ha demostrado que los atributos del entorno urbano son más importantes que los LOS (Level of Service) en la generación de tours multi-etapas. la presente tesis representa el primer análisis empírico de la relación entre los tipos de tours y la propensión al viaje. El concepto Propensity to Travel ha sido desarrollado exclusivamente para la tesis. Igualmente, el desarrollo de un modelo conjunto RC-Number of trips basado en tres escalas de medida representa innovación en cuanto a la comparación de las escalas geográficas, que no había sido hecha en la modelización de la self-selection. The relationship between built environment (BE) and travel behaviour (TB) has been studied in a number of cases, using several methods - aggregate and disaggregate approaches - and different focuses – trip frequency, automobile use, and vehicle miles travelled and so on. Definitely, travel is generated by the need to undertake activities and obtain services, and there is a general consensus that urban components affect TB. However researches are still needed to better understand which components of the travel behaviour are affected most and by which of the urban components. In order to fill the gap in the research, the present dissertation faced two main objectives: (1) To contribute to the better understanding of the relationship between travel demand and urban environment. And (2) To develop an econometric model for estimating travel demand with urban environment attributes. With this purpose, the present thesis faced an exhaustive research and computation of land-use variables in order to find the best representation of BE for modelling trip frequency. In particular two empirical analyses are carried out: 1. Estimation of three dimensions of travel demand using dimensions of urban environment. We compare different travel dimensions and geographical scales, and we measure self-selection contribution following the joint models. 2. Develop a hybrid model, integrated latent variable and discrete choice model. The implementation of hybrid models is new in the analysis of land-use and travel behaviour. BE and TB explicitly interact and allow richness information about a specific individual decision process For all empirical analysis is used a data-base from a survey conducted in 2006 and 2007 in Madrid. Spatial attributes describing neighbourhood environment are derived from different data sources: National Institute of Statistics-INE (Administrative: municipality and district) and GIS (circular units). INE provides raw data for such spatial units as: municipality and district. The construction of census units is trivial as the census bureau provides tables that readily define districts and municipalities. The construction of circular units requires us to determine the radius and associate the spatial information to our households. The first empirical part analyzes trip frequency by applying an ordered logit model. In this part is studied the effect of socio-economic, transport and land use characteristics on two travel dimensions: trip frequency and type of tour. In particular the land use is defined in terms of type of neighbourhoods and types of dwellers. Three neighbourhood representations are explored, and described three for constructing neighbourhood attributes. In particular administrative units are examined to represent neighbourhood and circular – unit representation. Ordered logit models are applied, while ordinal logit models are well-known, an intensive work for constructing a spatial attributes was carried out. On the other hand, the second empirical analysis consists of the development of an innovative econometric model that considers a latent variable called “propensity to travel”, and choice model is the choice of type of tour. The first two specifications of ordinal models help to estimate this latent variable. The latent variable is unobserved but the manifestation is called “indicators”, then the probability of choosing an alternative of tour is conditional to the probability of latent variable and type of tour. Since latent variable is unknown we fit the integral over its distribution. Four “sets of best variables” are specified, following the specification obtained from the correlation analysis. The results evidence that the relative importance of SE variables versus BE variables depends on how BE variables are measured. We found that each of these three spatial scales has its intangible qualities and drawbacks. Spatial scales play an important role on predicting travel demand due to the variability in measures at trip origin/destinations within the same administrative unit (municipality, district and so on). Larger units will produce less variation in data; but it does not affect certain variables, such as public transport supply, that are more significant at municipality level. By contrast, land-use measures are more efficient at district level. Self-selection in this context, is weak. Thus, the influence of BE attributes is true. The results of the hybrid model show that unobserved factors affect the choice of tour complexity. The latent variable used in this model is propensity to travel that is explained by socioeconomic aspects and neighbourhood attributes. The results show that neighbourhood attributes have indeed a significant impact on the choice of the type of tours either directly and through the propensity to travel. The propensity to travel has a different impact depending on the structure of each tour and increases the probability of choosing more complex tours, such as tours with many intermediate stops. The integration of choice and latent variable model shows that omitting important perception and attitudes leads to inconsistent estimates. The results also indicate that goodness of fit improves by adding the latent variable in both sequential and simultaneous estimation. There are significant differences in the sensitivity to the latent variable across alternatives. In general, as expected, the hybrid models show a major improvement into the goodness of fit of the model, compared to a classical discrete choice model that does not incorporate latent effects. The integrated model leads to a more detailed analysis of the behavioural process. Summarizing, the effect that built environment characteristics on trip frequency studied is deeply analyzed. In particular we tried to better understand how land use characteristics can be defined and measured and which of these measures do have really an impact on trip frequency. We also tried to test the superiority of HCM on this field. We can concluded that HCM shows a major improvement into the goodness of fit of the model, compared to classical discrete choice model that does not incorporate latent effects. And consequently, the application of HCM shows the importance of LV on the decision of tour complexity. People are more elastic to built environment attributes than level of services. Thus, policy implications must take place to develop more mixed areas, work-places in combination with commercial retails.

Road environment modeling using robust perspective analysis and recursive Bayesian segmentation

Recently, vision-based advanced driver-assistance systems (ADAS) have received a new increased interest to enhance driving safety. In particular, due to its high performance–cost ratio, mono-camera systems are arising as the main focus of this field of work. In this paper we present a novel on-board road modeling and vehicle detection system, which is a part of the result of the European I-WAY project. The system relies on a robust estimation of the perspective of the scene, which adapts to the dynamics of the vehicle and generates a stabilized rectified image of the road plane. This rectified plane is used by a recursive Bayesian classi- fier, which classifies pixels as belonging to different classes corresponding to the elements of interest of the scenario. This stage works as an intermediate layer that isolates subsequent modules since it absorbs the inherent variability of the scene. The system has been tested on-road, in different scenarios, including varied illumination and adverse weather conditions, and the results have been proved to be remarkable even for such complex scenarios.

Localization and activity detection Based on the fusion of environment And inertial sensors = Localización y detección de actividad Basadas en integración de sensores y dispositivos inerciales

Los sensores inerciales (acelerómetros y giróscopos) se han ido introduciendo poco a poco en dispositivos que usamos en nuestra vida diaria gracias a su minituarización. Hoy en día todos los smartphones contienen como mínimo un acelerómetro y un magnetómetro, siendo complementados en losmás modernos por giróscopos y barómetros. Esto, unido a la proliferación de los smartphones ha hecho viable el diseño de sistemas basados en las medidas de sensores que el usuario lleva colocados en alguna parte del cuerpo (que en un futuro estarán contenidos en tejidos inteligentes) o los integrados en su móvil. El papel de estos sensores se ha convertido en fundamental para el desarrollo de aplicaciones contextuales y de inteligencia ambiental. Algunos ejemplos son el control de los ejercicios de rehabilitación o la oferta de información referente al sitio turístico que se está visitando. El trabajo de esta tesis contribuye a explorar las posibilidades que ofrecen los sensores inerciales para el apoyo a la detección de actividad y la mejora de la precisión de servicios de localización para peatones. En lo referente al reconocimiento de la actividad que desarrolla un usuario, se ha explorado el uso de los sensores integrados en los dispositivos móviles de última generación (luz y proximidad, acelerómetro, giróscopo y magnetómetro). Las actividades objetivo son conocidas como ‘atómicas’ (andar a distintas velocidades, estar de pie, correr, estar sentado), esto es, actividades que constituyen unidades de actividades más complejas como pueden ser lavar los platos o ir al trabajo. De este modo, se usan algoritmos de clasificación sencillos que puedan ser integrados en un móvil como el Naïve Bayes, Tablas y Árboles de Decisión. Además, se pretende igualmente detectar la posición en la que el usuario lleva el móvil, no sólo con el objetivo de utilizar esa información para elegir un clasificador entrenado sólo con datos recogidos en la posición correspondiente (estrategia que mejora los resultados de estimación de la actividad), sino también para la generación de un evento que puede producir la ejecución de una acción. Finalmente, el trabajo incluye un análisis de las prestaciones de la clasificación variando el tipo de parámetros y el número de sensores usados y teniendo en cuenta no sólo la precisión de la clasificación sino también la carga computacional. Por otra parte, se ha propuesto un algoritmo basado en la cuenta de pasos utilizando informaiii ción proveniente de un acelerómetro colocado en el pie del usuario. El objetivo final es detectar la actividad que el usuario está haciendo junto con la estimación aproximada de la distancia recorrida. El algoritmo de cuenta pasos se basa en la detección de máximos y mínimos usando ventanas temporales y umbrales sin requerir información específica del usuario. El ámbito de seguimiento de peatones en interiores es interesante por la falta de un estándar de localización en este tipo de entornos. Se ha diseñado un filtro extendido de Kalman centralizado y ligeramente acoplado para fusionar la información medida por un acelerómetro colocado en el pie del usuario con medidas de posición. Se han aplicado también diferentes técnicas de corrección de errores como las de velocidad cero que se basan en la detección de los instantes en los que el pie está apoyado en el suelo. Los resultados han sido obtenidos en entornos interiores usando las posiciones estimadas por un sistema de triangulación basado en la medida de la potencia recibida (RSS) y GPS en exteriores. Finalmente, se han implementado algunas aplicaciones que prueban la utilidad del trabajo desarrollado. En primer lugar se ha considerado una aplicación de monitorización de actividad que proporciona al usuario información sobre el nivel de actividad que realiza durante un período de tiempo. El objetivo final es favorecer el cambio de comportamientos sedentarios, consiguiendo hábitos saludables. Se han desarrollado dos versiones de esta aplicación. En el primer caso se ha integrado el algoritmo de cuenta pasos en una plataforma OSGi móvil adquiriendo los datos de un acelerómetro Bluetooth colocado en el pie. En el segundo caso se ha creado la misma aplicación utilizando las implementaciones de los clasificadores en un dispositivo Android. Por otro lado, se ha planteado el diseño de una aplicación para la creación automática de un diario de viaje a partir de la detección de eventos importantes. Esta aplicación toma como entrada la información procedente de la estimación de actividad y de localización además de información almacenada en bases de datos abiertas (fotos, información sobre sitios) e información sobre sensores reales y virtuales (agenda, cámara, etc.) del móvil. Abstract Inertial sensors (accelerometers and gyroscopes) have been gradually embedded in the devices that people use in their daily lives thanks to their miniaturization. Nowadays all smartphones have at least one embedded magnetometer and accelerometer, containing the most upto- date ones gyroscopes and barometers. This issue, together with the fact that the penetration of smartphones is growing steadily, has made possible the design of systems that rely on the information gathered by wearable sensors (in the future contained in smart textiles) or inertial sensors embedded in a smartphone. The role of these sensors has become key to the development of context-aware and ambient intelligent applications. Some examples are the performance of rehabilitation exercises, the provision of information related to the place that the user is visiting or the interaction with objects by gesture recognition. The work of this thesis contributes to explore to which extent this kind of sensors can be useful to support activity recognition and pedestrian tracking, which have been proven to be essential for these applications. Regarding the recognition of the activity that a user performs, the use of sensors embedded in a smartphone (proximity and light sensors, gyroscopes, magnetometers and accelerometers) has been explored. The activities that are detected belong to the group of the ones known as ‘atomic’ activities (e.g. walking at different paces, running, standing), that is, activities or movements that are part of more complex activities such as doing the dishes or commuting. Simple, wellknown classifiers that can run embedded in a smartphone have been tested, such as Naïve Bayes, Decision Tables and Trees. In addition to this, another aim is to estimate the on-body position in which the user is carrying the mobile phone. The objective is not only to choose a classifier that has been trained with the corresponding data in order to enhance the classification but also to start actions. Finally, the performance of the different classifiers is analysed, taking into consideration different features and number of sensors. The computational and memory load of the classifiers is also measured. On the other hand, an algorithm based on step counting has been proposed. The acceleration information is provided by an accelerometer placed on the foot. The aim is to detect the activity that the user is performing together with the estimation of the distance covered. The step counting strategy is based on detecting minima and its corresponding maxima. Although the counting strategy is not innovative (it includes time windows and amplitude thresholds to prevent under or overestimation) no user-specific information is required. The field of pedestrian tracking is crucial due to the lack of a localization standard for this kind of environments. A loosely-coupled centralized Extended Kalman Filter has been proposed to perform the fusion of inertial and position measurements. Zero velocity updates have been applied whenever the foot is detected to be placed on the ground. The results have been obtained in indoor environments using a triangulation algorithm based on RSS measurements and GPS outdoors. Finally, some applications have been designed to test the usefulness of the work. The first one is called the ‘Activity Monitor’ whose aim is to prevent sedentary behaviours and to modify habits to achieve desired objectives of activity level. Two different versions of the application have been implemented. The first one uses the activity estimation based on the step counting algorithm, which has been integrated in an OSGi mobile framework acquiring the data from a Bluetooth accelerometer placed on the foot of the individual. The second one uses activity classifiers embedded in an Android smartphone. On the other hand, the design of a ‘Travel Logbook’ has been planned. The input of this application is the information provided by the activity and localization modules, external databases (e.g. pictures, points of interest, weather) and mobile embedded and virtual sensors (agenda, camera, etc.). The aim is to detect important events in the journey and gather the information necessary to store it as a journal page.

Perception of employers and employees regarding the attitude of businesses toward the environment: a qualitative analysis

Commitment and involvement from the different members of an organization are two key elements for an organization to achieve its environmental excellence. Firstly, businesses are aware of the close relationship between their activities and the environment, for they are not only polluting agents but also agents with the capacity to reduce adverse environmental impacts. Secondly, the fact that employees can play a relevant role in terms of the socially responsible measures to be taken by organizations has started to become an irrefutably important issue. This piece of research is intended to help gain knowledge concerning the attitude of the two main actors in productive activity toward the environmental, that is, employers and employees; as well, this research intends to identify factors determining behaviour towards the environmental. For this, we have gathered the ideas and assessments contained in the discourse of a group of small and medium-sized businesses, large company owners and officers, employees, and work related risk prevention representatives. Qualitative work consisted of in-depth interviews and the creation of discussion groups.

A novel method for radio propagation simulation based on automatic 3D environment reconstruction

In this paper, a novel method to simulate radio propagation is presented. The method consists of two steps: automatic 3D scenario reconstruction and propagation modeling. For 3D reconstruction, a machine learning algorithm is adopted and improved to automatically recognize objects in pictures taken from target region, and 3D models are generated based on the recognized objects. The propagation model employs a ray tracing algorithm to compute signal strength for each point on the constructed 3D map. By comparing with other methods, the work presented in this paper makes contributions on reducing human efforts and cost in constructing 3D scene; moreover, the developed propagation model proves its potential in both accuracy and efficiency.

Risk analysis for UAV safe operations: a rationalization for an agricultural environment

The road to the automation of the agricultural processes passes through the safe operation of the autonomous vehicles. This requirement is a fact in ground mobile units, but it still has not well defined for the aerial robots (UAVs) mainly because the normative and legislation are quite diffuse or even inexistent. Therefore, to define a common and global policy is the challenge to tackle. This characterization has to be addressed from the field experience. Accordingly, this paper presents the work done in this direction, based on the analysis of the most common sources of hazards when using UAV's for agricultural tasks. The work, based on the ISO 31000 normative, has been carried out by applying a three-step structure that integrates the identification, assessment and reduction procedures. The present paper exposes how this method has been applied to analyze previous accidents and malfunctions during UAV operations in order to obtain real failure causes. It has allowed highlighting common risks and hazardous sources and proposing specific guards and safety measures for the agricultural context.

Exploring Cultural Heritage Resources in a 3D Collaborative Environment

Cultural heritage is a complex and diverse concept, which brings together a wide domain of information. Resources linked to a cultural heritage site may consist of physical artefacts, books, works of art, pictures, historical maps, aerial photographs, archaeological surveys and 3D models. Moreover, all these resources are listed and described by a set of a variety of metadata specifications that allow their online search and consultation on the most basic characteristics of them. Some examples include Norma ISO 19115, Dublin Core, AAT, CDWA, CCO, DACS, MARC, MoReq, MODS, MuseumDat, TGN, SPECTRUM, VRA Core and Z39.50. Gateways are in place to fit in these metadata standards into those used in a SDI (ISO 19115 or INSPIRE), but substantial work still remains to be done for the complete incorporation of cultural heritage information. Therefore, the aim of this paper is to demonstrate how the complexity of cultural heritage resources can be dealt with by a visual exploration of their metadata within a 3D collaborative environment. The 3D collaborative environments are promising tools that represent the new frontier of our capacity of learning, understanding, communicating and transmitting culture.

Monitoring visual attention on a neurorehabilitation environment based on interactive video

The use of new technologies in neurorehabilitation has led to higher intensity rehabilitation processes, extending therapies in an economically sustainable way. Interactive Video (IV) technology allows therapists to work with virtual environments that reproduce real situations. In this way, patients deal with Activities of the Daily Living (ADL) immersed within enhanced environments [1]. These rehabilitation exercises, which focus in re-learning lost functions, will try to modulate the neural plasticity processes [2]. This research presents a system where a neurorehabilitation IV-based environment has been integrated with an eye-tracker device in order to monitor and to interact using visual attention. While patients are interacting with the neurorehabilitation environment, their visual behavior is closely related with their cognitive state, which in turn mirrors the brain damage condition suffered by them [3] [4]. Patients’ gaze data can provide knowledge on their attention focus and their cognitive state, as well as on the validity of the rehabilitation tasks proposed [5].