Asymmetric propagation of airblast from bench blasting

This paper investigates the propagation of airblast from quarry blasting. Peak overpressure is calculated as a function of blasting parameters (explosive mass per delay and velocity at which the detonation sequence proceeds along the bench) and polar coordinates of the point of interest (distance to the blast and azimuth with respect to the free face of the blast). The model is in the form of the product of a classical scaled distance attenuation law times a directional correction factor. The latter considers the influence of the bench face, and attenuates overpressure at the top level and amplifies it at the bottom. Such factor also accounts for the effect of the delay by amplifying the pressure in the direction of the initiation sequence if the velocity of initiation exceeds half the speed of sound and up to an initiation velocity in the range of the speed of sound. The model has been fitted to an empirical data set composed by 134 airblast records monitored in 47 blasts at two quarries. The measurements were made at distances to the blast less than 450 m. The model is statistically significant and has a determination coefficient of 0.869

Analyzing logic programs with dynamic scheduling

Traditional logic programming languages, such as Prolog, use a fixed left-to-right atom scheduling rule. Recent logic programming languages, however, usually provide more flexible scheduling in which computation generally proceeds leftto- right but in which some calis are dynamically "delayed" until their arguments are sufRciently instantiated to allow the cali to run efficiently. Such dynamic scheduling has a significant cost. We give a framework for the global analysis of logic programming languages with dynamic scheduling and show that program analysis based on this framework supports optimizations which remove much of the overhead of dynamic scheduling.

Perspectiva jurídica de la gestión y conservación de los recursos pesqueros en España. La pesca-turismo como opción de futuro

El objetivo de la presente Tesis está dirigido a analizar diversas opciones de diversificación que la pesca marítima profesional puede tener, poniendo el acento en el respeto al medio ambiente. En concreto la Pesca-turismo aparece como una de las alternativas más viables tanto por su respeto al medio ambiente como por su relativamente sencilla posibilidad de implantación en España. A fin de poder desarrollar la misma se proponen los cambios legislativos necesarios para su implantación en nuestro país procediéndose, para ello, al estudio de la situación actual de la actividad pesquera en nuestro país desde un punto de vista jurídico, con una especial consideración de la gestión y conservación de los recursos pesqueros. El estudio de su posible implantación en España, comienza analizando cuáles son las diferentes administraciones que influyen en dicha actividad y en qué medida lo hacen, tanto en el ámbito nacional como en el supranacional, con una especial referencia a la Unión Europea, así como la organización de las mismas. Acto seguido se procede al examen, tanto de la normativa sobre la materia, como de la jurisprudencia y la doctrina aplicables a la actividad de pesca marítima en España para, una vez llevado a cabo dicho estudio, comenzar con el examen de los requisitos exigidos, ya sean éstos de índole material o humana, a aquéllos que quieran llevarla a cabo. A continuación, se estudia el régimen de infracciones y sanciones, entrando, por último, en el terreno más propiamente de conservación de los recursos, donde se examinan las medidas que, a tal fin, se encuentran en nuestro ordenamiento jurídico. Más adelante se analiza, siquiera sea brevemente, la pesca deportiva, que, aunque con una incidencia muy inferior, no deja de ser otra forma de actividad extractiva. La existencia de otras experiencias parecidas a la propuesta de pesca-turismo en el ámbito internacional es objeto de estudio a fin de determinar cuál es la situación en otros países donde se hayan implantado con anterioridad. Para ello se lleva a cabo un análisis de las distintas soluciones que a este mismo problema se han dado en otros países también con amplia tradición en este campo procediendo, a tal fin, a un estudio de la legislación sobre la pesca-turismo, fundamentalmente en Italia, pero también en Francia y Portugal. A la vista de cuanto antecede es posible concluir que al día de hoy no es factible la realización de las actividades de Pesca-turismo con los instrumentos jurídicos de los que se dispone en España, dado que existen puntos sustanciales en los mismos que o bien impiden o bien no permiten su desarrollo. Por tanto el planteamiento de tales actividades necesariamente conlleva una serie de modificaciones normativas. El siguiente paso y en relación con las modificaciones normativas a efectuar, se ofrece un texto alternativo al texto legal a modificar (Ley 3/2001 de Pesca Marítima del Estado) y al Real Decreto 1027/1989, mientras que se dejan efectuados los apuntes precisos de cual debería de ser el marco reglamentario que, en desarrollo de las modificaciones anteriores, posibilitasen el ejercicio de la Pesca-turismo en España. Por último se ha optado por efectuar un análisis de la opinión del sector, tendente a verificar si los datos obtenidos empíricamente quedaban asimismo reflejados en las actitudes de los destinatarios finales de tales normas, que no serían otros que los pescadores profesionales. A tal fin se ha procedido a recoger las opiniones de diversos colectivos del sector, a través tanto de las cofradías de pescadores como de las Federaciones, acerca de las actividades de pesca-turismo, buscando la representación de todas las zonas geográficas. Fruto de tal investigación se ha llegado a la conclusión de que el desarrollo de las actividades propuesta de pescaturismo cuenta con una opinión favorable dentro del sector que, con una mayoría aplastante se manifestó a favor de desarrollar la posibilidad de ejercicio de la mismas. SUMMARY The objective of this thesis is aimed to analyze various options of diversification that commercial maritime fishing can have, with an emphasis on respect for the environment. Specifically, fishing-tourism appears as one of the most viable alternatives because of its environmental friendliness as well by its relatively simple possibility of implementation in Spain In order to develop it, it is proposed the necessary changes legislative for implementation in our country proceeding to study of the current situation of fisheries in our country from a legal perspective, with special consideration of the management and conservation of fisheries resources. The study of their possible implementation in Spain, begins by analyzing which are the different administrations that influence in that activity and to what extent they do, both at the national field as well at the supranational field, with special reference to the European Union and organization of thereof. Then proceeds to an examination, both of the relevant legislation as well as of the jurisprudence and doctrine applicable to maritime fishing in Spain for, once conducted this study, to begin with the consideration of the requirements, be they human or material, to those who want to carry out. Then studies the regime of offences and penalties, entering, finally, in the field conservation of resources, where discusses measures which, to this end, are in our legal system Later analyzes, even briefly, sport fishing, which, although with a much lower incidence, it is another form of extractive activity. The existence of other similar experiences to the proposal of fishing-tourism in the international arena is object of study in order to determine which is the situation in other countries where it has been implemented previously. For that it is carried out an analysis of the different solutions that to this same problem have been given in other countries with long tradition in this field, to proceed to study about legislation on fishing-tourism, fundamentally in Italy, but also in France and Portugal In view of the above it can be concluded that today is not feasible to implement the fishing-tourism activities with the legal instruments that are available in Spain, as there are substantial points which prevent them or not allows its development. Therefore the approach to such activities necessarily entails a series of normatives changes. The next step and in relation to normatives changes to do, it is offered an alternative text to the legal text to modify (Law 3/2001 of the State Marine Fisheries) and to the Royal Decree No. 1027 / 1989, while we leave made accurate notes about which ought be the reglamentary framework that, in developing of the above modifications, can be enable exercise of fishing-tourism in Spain. Finally, it is been opted to carry out an analysis of the opinion of the sector, aimed at verifying if data obtained empirically were also reflected in the attitudes of the final recipients of such standards, who would not be other than the professional fishermen. For this purpose it has been collected the opinions of various groups of the sector, through of fishermen's associations and federations, about of the activities of tourism-fishing, looking for the representation of all geographical areas. The result of such an investigation has concluded that the development of this proposed activities fishing-tourism has a positive opinion within the sector because an overwhelming majority was in favor of developing the possibility of exercise of the same.

Accelerating CFD via local POD plus Galerkin projections

Se desarrollan varias técnicas basadas en descomposición ortogonal propia (DOP) local y proyección de tipo Galerkin para acelerar la integración numérica de problemas de evolución, de tipo parabólico, no lineales. Las ideas y métodos que se presentan conllevan un nuevo enfoque para la modelización de tipo DOP, que combina intervalos temporales cortos en que se usa un esquema numérico estándard con otros intervalos temporales en que se utilizan los sistemas de tipo Galerkin que resultan de proyectar las ecuaciones de evolución sobre la variedad lineal generada por los modos DOP, obtenidos a partir de instantáneas calculadas en los intervalos donde actúa el código numérico. La variedad DOP se construye completamente en el primer intervalo, pero solamente se actualiza en los demás intervalos según las dinámicas de la solución, aumentando de este modo la eficiencia del modelo de orden reducido resultante. Además, se aprovechan algunas propiedades asociadas a la dependencia débil de los modos DOP tanto en la variable temporal como en los posibles parámetros de que pueda depender el problema. De esta forma, se aumentan la flexibilidad y la eficiencia computacional del proceso. La aplicación de los métodos resultantes es muy prometedora, tanto en la simulación de transitorios en flujos laminares como en la construcción de diagramas de bifurcación en sistemas dependientes de parámetros. Las ideas y los algoritmos desarrollados en la tesis se ilustran en dos problemas test, la ecuación unidimensional compleja de Ginzburg-Landau y el problema bidimensional no estacionario de la cavidad. Abstract Various ideas and methods involving local proper orthogonal decomposition (POD) and Galerkin projection are presented aiming at accelerating the numerical integration of nonlinear time dependent parabolic problems. The proposed methods come from a new approach to the POD-based model reduction procedures, which combines short runs with a given numerical solver and a reduced order model constructed by expanding the solution of the problem into appropriate POD modes, which span a POD manifold, and Galerkin projecting some evolution equations onto that linear manifold. The POD manifold is completely constructed from the outset, but only updated as time proceeds according to the dynamics, which yields an adaptive and flexible procedure. In addition, some properties concerning the weak dependence of the POD modes on time and possible parameters in the problem are exploited in order to increase the flexibility and efficiency of the low dimensional model computation. Application of the developed techniques to the approximation of transients in laminar fluid flows and the simulation of attractors in bifurcation problems shows very promising results. The test problems considered to illustrate the various ideas and check the performance of the algorithms are the onedimensional complex Ginzburg-Landau equation and the two-dimensional unsteady liddriven cavity problem.

Estudio de seguridad y salud para la construcción de una estación de servicio

Un proyecto de construcción de una estación de servicio requiere de un estudio de seguridad y salud para asegurar que los trabajos y tareas necesarios se realizan en las condiciones adecuadas, en cumplimiento al Real Decreto 1.627/1997, de 24 de Octubre, BOE número 256, 25 de Octubre de 1997 por el que se establecen disposiciones mínimas de seguridad y de salud en las obras de construcción. Dentro del procedimiento para realizar dicho estudio se procede a realizar una comprobación y enumeración de las distintas tareas que serán necesarias para la construcción, analizando el grado de riesgo que cada actividad presenta y, en función de estas, generar una serie de recomendaciones y normas para minimizar o eliminar dichos riesgos. Del estudio realizado se deduce que los trabajos presentan unos riesgos de baja probabilidad siempre que se mantenga un mínimo de atención y una actitud de prudencia y responsabilidad. ABSTRACT A service station construction project requires a safety and health study to ensure that necessary work and tasks are carried out in the right conditions, pursuant to Royal Decree 1.627/1997 of 24 October, BOE number 256, 25 October 1997 which establishes minimum requirements of safety and health in construction. Within the procedure to carry out this study proceeds to perform a check and enumeration of the various tasks which will be necessary for the construction, analyzing the degree of risk that each activity presents and, based on these, generating a series of recommendations and standards to minimize or eliminate these risks. From the study that has been done it can be determined that the work presents a low probability risks provided that a minimum of care and an attitude of prudence and responsibility..

Prediction of near field overpressure from quarry blasting

This paper investigates the propagation of airblast or pressure waves in air produced by bench blasting (i.e. detonation of the explosive in a row of blastholes, breaking the burden of rock towards the free vertical face of the block). Peak overpressure is calculated as a function of blasting parameters (explosive mass per delay and velocity at which the detonation sequence proceeds along the bench) and the polar coordinates of the position of interest (distance to the source and azimuth with respect to the free face). The model has been fitted to empirical data using linear least squares. The data set is composed of 122 airblast records monitored at distances less than 400 m in 41 production blasts carried out in two quarries. The model is statistically significant and has a determination coefficient of 0.87. The formula is validated from 12 airblast measurements gathered in five additional blasts.

An Integrated Approach to Strategic Asset Management

This paper focuses on identifying and analysing the elements of Strategic Management for infrastructure and engineering assets. These elements are contended to involve an understanding of governance, corporate policy, corporate objectives, corporate strategy and interagency collaboration and will in turn, allow the ability determine a broader and more comprehensive framework for engineering asset management, ie a ‘staged approach’ to understanding how assets are managed within organisations. While the assets themselves have often been the sole concern for good management practices, other social and contextual elements have come into the mix in order to promote strategic asset management. The development of an integrated approach to asset management is at the base of the research question. What are the considerations and implications for adopting and implementing an integrated strategic asset management (ISAM) framework? While operational matters have been given prominence, a subset of corporate governance, Asset Governance, details the policies and processes needed to acquire, utilise, maintain and account for an organisation’s assets. Asset governance stems from the organisation’s overarching corporate governance principles; as a result it defines the management context in which engineering asset management is implemented. This aspect will be examined to determine the appropriate relationship between organisational strategic management and strategic asset management to further the theoretical engagement with the maturity of strategy,policy and governance for infrastructure and engineered assets. Asset governance stems from the organisation’s overarching corporate governance principles; as a result it defines the management context in which engineering asset management is implemented. The research proceeds by a document analysis of corporate reports and policy recommendations in terms of infrastructure and engineered assets. The paper concludes that incorporating an integrated asset management framework can promote a more robust conceptualisation of public assets and how they combine to provide a comprehensive system of service outcomes.

Novel fast random search clustering approach for mixing matrix identification in MIMO linear blind inverse problems with sparse inputs

In this paper we propose a novel fast random search clustering (RSC) algorithm for mixing matrix identification in multiple input multiple output (MIMO) linear blind inverse problems with sparse inputs. The proposed approach is based on the clustering of the observations around the directions given by the columns of the mixing matrix that occurs typically for sparse inputs. Exploiting this fact, the RSC algorithm proceeds by parameterizing the mixing matrix using hyperspherical coordinates, randomly selecting candidate basis vectors (i.e. clustering directions) from the observations, and accepting or rejecting them according to a binary hypothesis test based on the Neyman–Pearson criterion. The RSC algorithm is not tailored to any specific distribution for the sources, can deal with an arbitrary number of inputs and outputs (thus solving the difficult under-determined problem), and is applicable to both instantaneous and convolutive mixtures. Extensive simulations for synthetic and real data with different number of inputs and outputs, data size, sparsity factors of the inputs and signal to noise ratios confirm the good performance of the proposed approach under moderate/high signal to noise ratios. RESUMEN. Método de separación ciega de fuentes para señales dispersas basado en la identificación de la matriz de mezcla mediante técnicas de "clustering" aleatorio.

Simulación de componentes no estacionarias de viento en orografías complejas

Realistic operation of helicopter flight simulators in complex topographies (such as urban environments) requires appropriate prediction of the incoming wind, and this prediction should be made in real time. Unfortunately, the wind topology around complex topographies shows time-dependent, fully nonlinear, turbulent patterns (i.e., wakes) whose simulation cannot be made using computationally inexpensive tools based on corrected potential approximations. Instead, the full Navier-Stokes plus some kind of turbulent modeling is necessary, which is quite computationally expensive. The complete unsteady flow depends on two parameters, namely the velocity and orientation of the free stream flow. The aim of this MSc thesis is to develop a methodology for the real time simulation of these complex flows. For simplicity, the flow around a single building (20 mx20 m cross section and 100 m height) is considered, with free stream velocity in the range 5-25 m/s. Because of the square cross section, the problem shows two reflection symmetries, which allows for restricting the orientations to the range 0° < a. < 45°. The methodology includes an offline preprocess and the online operation. The preprocess consists in three steps: An appropriate, unstructured mesh is selected in which the flow is sim¬ulated using OpenFOAM, and this is done for 33 combinations of 3 free stream intensities and 11 orientations. For each of these, the simulation proceeds for a sufficiently large time as to eliminate transients. This step is quite computationally expensive. Each flow field is post-processed using a combination of proper orthogonal decomposition, fast Fourier transform, and a convenient optimization tool, which identifies the relevant frequencies (namely, both the basic frequencies and their harmonics) and modes in the computational mesh. This combination includes several new ingredients to filter errors out and identify the relevant spatio-temporal patterns. Note that, in principle, the basic frequencies depend on both the intensity and the orientation of the free stream flow. The outcome of this step is a set of modes (vectors containing the three velocity components at all mesh points) for the various Fourier components, intensities, and orientations, which can be organized as a third order tensor. This step is fairly computationally inexpensive. The above mentioned tensor is treated using a combination of truncated high order singular value, decomposition and appropriate one-dimensional interpolation (as in Lorente, Velazquez, Vega, J. Aircraft, 45 (2008) 1779-1788). The outcome is a tensor representation of both the relevant fre¬quencies and the associated Fourier modes for a given pair of values of the free stream flow intensity and orientation. This step is fairly compu¬tationally inexpensive. The online, operation requires just reconstructing the time-dependent flow field from its Fourier representation, which is extremely computationally inex¬pensive. The whole method is quite robust.

A theoretical study on the formation of iodine oxide aggregates and monohydrates

Biotic and abiotic emissions of molecular iodine and iodocarbons from the sea or the ice surface and the intertidal zone to the coastal/polar marine boundary layer lead to the formation of iodine oxides, which subsequently nucleate forming iodine oxide particles (IOPs). Although the link between coastal iodine emissions and ultrafine aerosol bursts is well established, the details of the nucleation mechanism have not yet been elucidated. In this paper, results of a theoretical study of a range of potentially relevant aggregation reactions of different iodine oxides, as well as complexation with water molecules, are reported. Thermochemical properties of these reactions are obtained from high level ab initio correlated calculations including spin–orbit corrections. The results show that the nucleation path most likely proceeds through dimerisation of I2O4. It is also shown that water can hinder gas-to-particle conversion to some extent, although complexation with key iodine oxides does not remove enough of these to stop IOP formation. A consistent picture of this process emerges from the theoretical study presented here and the findings of a new laboratory study reported in the accompanying paper (Gomez Martin et al., 2013).

Using Knowledge Modelling Tools for Agent-Based Systems: The Experience of KSM

The aim of this chapter is to discuss the applicability of recently proposed knowledge modelling tools to the development of agent-based systems. The discussion is derived from the real world experience of a particular software tool called KSM (Knowledge Structure Manager). The chapter provides details about this tool and then proceeds to show in which forms the software may be used to support the development of agent-based systems. Two multiagent systems, one in the field of telecommunications management and the other one in the field of flood control, are described. Conclusions about these studies are presented, summarizing the main contributions that knowledge modelling tools can bring to the development of agent-based systems.

Reality bites: Documentary photography and architectural realism = Fragmentos de realidad: Fotografía documental y realismo en arquitectura

En el día de hoy nos enfrentamos a una serie de desafíos económicos, geopolíticos y ambientales que apuntan hacia una transformación profunda del mundo tal y como lo conocemos. La arquitectura esta – siempre lo ha estado – imbricada en todos estos problemas. En nuestra actual condición de recursos limitados e injusticia global surge la necesidad de superar la dicotomía entre progreso y tradición, entre innovación y preservación – la urgencia de redefinir incluso cada uno de estos términos. Los tipos de crisis que encaramos ahora no se resolverán con mas tecnología y más crecimiento – se necesita también una profunda reevaluación de nuestros sistemas de valores e incluso de nuestra sensibilidad. En este contexto, la humilde contribución de esta tesis consiste en proponer la idea de un realismo en arquitectura, entendido como una actitud progresista y atenta a lo que ya existe, dispuesta a abrir los ojos al presente, a las condiciones y los problemas reales que nos rodean. Pensando en esta idea, resulta evidente que si bien el realismo carece de una definición clara en el campo de la arquitectura hoy, cuenta sin embargo con numerosos precedentes parciales, entre ellos algunos de los más notorios episodios de la historia de la arquitectura reciente. Al intentar confeccionar una lista provisional de arquitectos realistas en el último siglo, otro hecho se nos presenta: muchos, por no decir todos estos arquitectos, comparten una fijación por la fotografía, bien apropiándose del trabajo de fotógrafos contemporáneos, bien tomando sus propias imágenes como una forma de mirar fuera de sus estudios e incorporar la realidad del medio construido a sus proyectos. Parece entonces lógico pensar que la arquitectura, como disciplina visual, ha acudido a otra disciplina visual en búsqueda de su propia respuesta al problema del realismo – dentro de este campo la fotografía reverbera con la arquitectura especialmente, ya que ambas son consideradas simultáneamente como practicas utilitarias y como parte de las bellas artes. Parece entonces lógico el organizar la investigación como una serie de casos, con la esperanza de que la acumulación de diversas instancias en las que la arquitectura ha acudido a la fotografía en su búsqueda de un realismo arrojara luz sobre las ideas más generales a debate. Por tanto, cada uno de los episodios en este texto se examina en sus propios términos, si bien una serie de interconexiones emergen a medida que el estudio procede con un suave orden cronológico. Hacia el final del texto cuestiones más grandes recobran protagonismo, a medida que las repercusiones políticas de nuestro estudio se hacen más patentes y comenzamos a interrogar las implicaciones contemporáneas y el potencial futuro de nuestra discusión sobre el realismo. ABSTRACT Today we are faced with a series of economic, geopolitical and environmental challenges that outline a deep transformation of the world as we know it. Architecture is – it has always been – ingrained in all of these problems. In our current condition of limited resources and global inequalities there is a necessity to overcome the dichotomy between progress and tradition, between innovation and preservation – an urgency to even redefine these terms altogether. The types of crises that we are facing will not be solved with more technology and more growth – a deep reevaluation of our systems of values and our sensibilities are also needed. In this context, the humble contribution of this text is to put forward the idea of an architectural realism, understood as an attitude that is both progressive and attentive to what is already in place, willing to open its eyes to the present and accept the real conditions and problems around us. In thinking about this prospect, it immediately becomes apparent that even if realism lacks a clear definition in the field of architecture today, there are numerous partial precedents for it, among them some of the most notorious episodes in the recent history of architecture. In crafting a tentative list of realist architects in the last century, another realization takes place: many, not to say all of these architects, have had a fixation with photography, either appropriating the work of contemporary photographers or taking photographs themselves as a way to look out their windows and bring the reality of the built environment into their practices. It seems then logical to think that architecture, as a visual discipline, has looked to other visual disciplines in search for its own take on the problem of realism – within this field, photography specially resonates with architecture, since both are regarded simultaneously as utilitarian practices and belonging to the fine arts. The idea then becomes to organize the research as a series of cases, with the hope that the accumulation of diverse instances in which architecture has approached photography in its realist drive will shed some light on the larger ideas at stake. Therefore, each of the episodes in this text is examined on its own terms, with a series of interconnections slowly emerging as our survey proceeds with a soft chronologic order. Towards the end of the study, larger issues regain relevance as the political repercussions of our inquiry become more pressing and we start to question the contemporary implications and future potentials of our discussion on realism.

Hidrogeología e hidrodinámica del acuífero de los manantiales de Gormaz y su importancia en el caudal base del río Duero, España = Hydrogeology and hydrodynamic of the Gormaz Springs Aquifer and its importance to the base flow of the Duero River, Spain

Se cuantifican las descargas subterráneas de un acuífero a un río que lo atraviesa utilizando correlaciones estadísticas. El río Duero, España, incrementa su caudal base en varios m3/s, al atravesar unos afloramientos carbonatados mesozoicos en un pequeño tramo de su cabecera; esto es de especial importancia en época de estiaje, cuando la mayor parte del caudal base del río procede de manantiales que allí se sitúan. Dichos afloramientos corresponden a uno de los dos acuíferos calcáreos confinados, que se desarrollan en paralelo y están hidráulicamente desconectados por una capa impermeable, que forman el sistema acuífero de los manantiales de Gormaz. Este sistema se encuentra en estado de régimen natural y está apenas explotado. Se define el modelo conceptual de funcionamiento hidrogeológico, considerando el papel hidrogeológico de la falla de Gormaz, situada en la zona de descarga del sistema. Analizando información geológica antecedente y la geofísica exploratoria realizada, se obtuvo un mejor conocimiento de la geometría y los límites de los acuíferos, definiéndose un sistema acuífero con una zona de recarga en el sur, correspondiente a los afloramientos calcáreos, los cuales se confinan hacia el norte bajo el Terciario, hasta intersecar con la falla normal de Gormaz. El salto de falla genera una barrera para las formaciones permeables situadas al extremo norte (margen derecha del río Duero); a su vez, el plano de falla facilita el ascenso del agua subterránea del sistema acuífero en estudio y pone en conexión hidráulica los dos acuíferos. Se estimaron, además, los parámetros hidráulicos de los acuíferos en los alrededores de la falla. La buena correlación entre los niveles piezométricos y las descargas subterráneas al río Duero han permitido la reconstrucción del hidrograma de los manantiales de Gormaz en el periodo 1992-2006. Se calcula así que la contribución subterránea al río Duero es de 135.9 hm3/año, que supone el 18.9% de la aportación total del río. In a short stretch of its headwaters, the base flow of the River Duero increases by several m3/s as it traverses some Mesozoic carbonate outcrops. This is of special importance during the dry season, when the majority of the base flow of the river proceeds from springs in this reach. The outcrops correspond to one of two confined calcareous aquifers that developed in parallel but which are not hydraulically connected because of an impermeable layer. Together, they constitute the aquifer system of the Gormaz Springs. The system is still in its natural regime and is hardly exploited. This study defines the conceptual model of hydrogeological functioning, taking into consideration the role of the Gormaz Fault, which is situated in the discharge zone of the system. Analysis of both antecedent geological information and geophysical explorations has led to a better understanding of the geometry and boundaries of the aquifers, defining an aquifer system with a recharge zone in the south corresponding to in the calcareous outcrops. These calcareous outcrops are confined to the north below Tertiary formations, as far as their intersection with the normal fault of Gormaz. The throw of the fault forms the barrier of the permeable formations situated in the extreme north (right bank of the River Duero). In turn, the fault plane facilitates the upflow of groundwater from the aquifer system and creates hydraulic connection between the two aquifers. In addition, the study estimated the hydraulic parameters of the aquifer around the fault. The close correlation between piezometric levels and the groundwater discharges to the River Duero has enabled the reconstruction of the hydrogram of Gormaz springs over the period 1992-2006. By this means, it is calculated that the groundwater contribution to the River Duero is 135.9 hm3/year, or 18.9% of the total river inflow.

Elaboración de un nuevo modelo económico para la contribución al desarrollo sostenible de países del África subsahariana: implementación en Guinea Bissau

El escaso crecimiento de los países del África subsahariana, lleva a la necesidad de plantear un tipo de modelo económico que se adapte a sus especiales características y que en definitiva, conduzca a las sociedades que viven en estos países a un aumento de su calidad de vida, mediante mejoras en todos los campos sociales tales como: la enseñanza, la salud y la nutrición, que puedan ayudar a transformar las perspectivas del crecimiento económico, especialmente en los países objeto de estudio, que se caracterizan por presentar bajos ingresos y escaso desarrollo humano. Se puede concluir, por tanto, diciendo que en definitiva, el fin es el desarrollo humano y que el crecimiento económico es un medio. El propósito del crecimiento económico debe ser enriquecer la vida de la gente. Los adelantos a corto plazo en materia de desarrollo humano son posibles, merced a un mayor crecimiento económico que a su vez no debe desligarse del respeto por el medioambiente y el entorno. Para conseguir estos objetivos, se plantea en la presente tesis un modelo económico, elaborado siguiendo las directrices de la Dinámica de Sistemas, mediante el uso del programa informático VENSIM. El modelo planteado se basa en la producción de energía eléctrica, que sería capaz de abastecer a una población y generar unos excedentes que podrían ser vendidos y las ganancias reinvertidas para impulsar el crecimiento económico de la población a la que abastece. ABSTRACT Low growth in sub-Saharan Africa, leading to the need to establish a type of economic model that suits their special characteristics and ultimately lead to societies that live in these countries to increase human capacity through improvements in all social fields such as education, health and nutrition that can help transform the prospects for economic growth, especially in the countries under study, which are characterized by low income and low human development. It can be concluded, therefore, saying that ultimately, the end is human development and economic growth is a means. The purpose of economic growth should be to enrich the lives of people. The short-term advances in human development are possible, thanks to higher economic growth which in turn should not be separated from respect for the environment and intone. To achieve these objectives, we propose in this thesis an economic model, developed under the guidance of dynamic systems, using the computer program VENSIM. The proposed model is based on the production of electricity, which would be able to supply a population and generate a surplus that could be sold and the proceeds reinvested to boost economic growth in the population it serves.

A dynamic programming approach to the formulation and solution of finite element equations

A method for formulating and algorithmically solving the equations of finite element problems is presented. The method starts with a parametric partition of the domain in juxtaposed strips that permits sweeping the whole region by a sequential addition (or removal) of adjacent strips. The solution of the difference equations constructed over that grid proceeds along with the addition removal of strips in a manner resembling the transfer matrix approach, except that different rules of composition that lead to numerically stable algorithms are used for the stiffness matrices of the strips. Dynamic programming and invariant imbedding ideas underlie the construction of such rules of composition. Among other features of interest, the present methodology provides to some extent the analyst's control over the type and quantity of data to be computed. In particular, the one-sweep method presented in Section 9, with no apparent counterpart in standard methods, appears to be very efficient insofar as time and storage is concerned. The paper ends with the presentation of a numerical example