A Structure of Problem Solving Methods for Real Time Decision Support in Traffic Control

This article describes a knowledge-based application in the domain of road traffic management that we have developed following a knowledge modeling approach and the notion of problem-solving method. The article presents first a domain-independent model for real-time decision support as a structured collection of problem solving methods. Then, it is described how this general model is used to develop an operational version for the domain of traffic management. For this purpose, a particular knowledge modeling tool, called KSM (Knowledge Structure Manager), was applied. Finally, the article shows an application developed for a traffic network of the city of Madrid and it is compared with a second application developed for a different traffic area of the city of Barcelona.

A Language to Formalize and to Operationalize Problem-solving Strategies of Structured Knowledge Models

This paper describes a proposal of a language called Link which has been designed to formalize and operationalize problem solving strategies. This language is used within a software environment called KSM (Knowledge Structure Manager) which helps developers in formulating and operationalizing structured knowledge models. The paper presents both its syntax and dynamics, and gives examples of well-known problem-solving strategies of reasoning formulated using this language.

A model for evaluation of generic competences in engineering: application to the problem. Solving competence at the technical University of Madrid.

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help teachers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with a two-fold objective: a) To develop a model for teaching and evaluating core competences that is useful and easily applicable to its different degrees, and b) to provide support to teachers by creating an area within the Website for Educational Innovation where they can search for information on the model corresponding to each core competence approved by UPM. Information available on each competence includes its definition, the formulation of indicators providing evidence on the level of acquisition, the recommended teaching and evaluation methodology, examples of evaluation rules for the different levels of competence acquisition, and descriptions of best practices. These best practices correspond to pilot tests applied to several of the academic subjects conducted at UPM in order to validate the model. This work describes the general procedure that was used and presents the model developed specifically for the problem-solving competence. Some of the pilot experiences are also summarised and their results analysed

A model for evaluation of generic competences in engineering: application to the problem-solving competence at UPM.

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help teachers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with a two-fold objective: a) To develop a model for teaching and evaluating core competences that is useful and easily applicable to its different degrees, and b) to provide support to teachers by creating an area within the Website for Educational Innovation where they can search for information on the model corresponding to each core competence approved by UPM. Information available on each competence includes its definition, the formulation of indicators providing evidence on the level of acquisition, the recommended teaching and evaluation methodology, examples of evaluation rules for the different levels of competence acquisition, and descriptions of best practices. These best practices correspond to pilot tests applied to several of the academic subjects conducted at UPM in order to validate the model. This work describes the general procedure that was used and presents the model developed specifically for the problem-solving competence. Some of the pilot experiences are also summarised and their results analysed

The role of computational logic as a hinge paradigm among deduction, problem solving, programming, and parallelism

This paper presents some brief considerations on the role of Computational Logic in the construction of Artificial Intelligence systems and in programming in general. It does not address how the many problems in AI can be solved but, rather more modestly, tries to point out some advantages of Computational Logic as a tool for the AI scientist in his quest. It addresses the interaction between declarative and procedural views of programs (deduction and action), the impact of the intrinsic limitations of logic, the relationship with other apparently competing computational paradigms, and finally discusses implementation-related issues, such as the efficiency of current implementations and their capability for efficiently exploiting existing and future sequential and parallel hardware. The purpose of the discussion is in no way to present Computational Logic as the unique overall vehicle for the development of intelligent systems (in the firm belief that such a panacea is yet to be found) but rather to stress its strengths in providing reasonable solutions to several aspects of the task.

Modelling wake effects in large wind farms in complex terrain: the problem, the methods and the issues

Computational fluid dynamic (CFD) methods are used in this paper to predict the power production from entire wind farms in complex terrain and to shed some light into the wake flow patterns. Two full three-dimensional Navier–Stokes solvers for incompressible fluid flow, employing k − ϵ and k − ω turbulence closures, are used. The wind turbines are modeled as momentum absorbers by means of their thrust coefficient through the actuator disk approach. Alternative methods for estimating the reference wind speed in the calculation of the thrust are tested. The work presented in this paper is part of the work being undertaken within the UpWind Integrated Project that aims to develop the design tools for next generation of large wind turbines. In this part of UpWind, the performance of wind farm and wake models is being examined in complex terrain environment where there are few pre-existing relevant measurements. The focus of the work being carried out is to evaluate the performance of CFD models in large wind farm applications in complex terrain and to examine the development of the wakes in a complex terrain environment.

Development of a method of assessment of the problem-solving competence at the technical University of Madrid.

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help lecturers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with the objective of developing a model for teaching and evaluating core competences and providing support to lecturers. This paper deals with the problem-solving competence. The first step has been to elaborate a guide for teachers to provide a homogeneous way to asses this competence. This guide considers several levels of acquisition of the competence and provides the rubrics to be applied for each one. The guide has been subsequently validated with several pilot experiences. In this paper we will explain the problem-solving assessment guide for teachers and will show the pilot experiences that has been carried out. We will finally justify the validity of the method to assess the problem-solving competence.

Assessment of problem solving in computing studies

The assessment of learning outcomes is a key concept in the European Credit Transfer and Accumulation System (ECTS) since credits are awarded when the assessment shows the competences which were aimed at have been developed at an appropriate level. This paper describes a study which was first part of the Bologna Experts Team-Spain project and then developed as an independent study. It was carried out with the overall goal to gain experience in the assessment of learning outcomes. More specifically it aimed at 1) designing procedures for the assessment of learning outcomes related to these compulsory generic competences; 2) testing some basic psychometric features that an assessment device with some consequences for the subjects being evaluated needs to prove; 3) testing different procedures of standard setting, and 4) using assessment results as orienting feedback to students and their tutors. The process of development of tests to carry out the assessment of learning outcomes is described as well as some basic features regarding their reliability and validity. First conclusions on the comparison of the results achieved at two academic levels are also presented.

Development of a method of assessment of the problem-solving competency at the Technical University of Madrid

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help lecturers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with the objective of developing a model for teaching and evaluating core competences and providing support to lecturers. This paper deals with the problem solving competence. The first step has been to elaborate a guide for teachers to provide an homogeneous way to asses this competence. This guide considers several levels of acquisition of the competence and provided the rubrics to be applied for each one. The guide has been subsequently validated with several pilot experiences. In this paper we will explain the problem-solving assessment guide for teachers and will show the pilot experiences that has been carried out. We will finally justify the validity of the method to assess the problem solving competence.

Parallel Virtual Urban Workshops A “resasonable-cost” methodology for academic internationalization in problem-solving oriented postgraduate subjects

Descripción y análisis critic de una metodología de taller de posgrado a realizar entre dos universidades en idioma ingles y con el apoyo de las nuevas tecnologías

Métodos de resolución de problemas: Aplicación al diseño de sistemas inteligentes

Dos aspectos destacan entre los resultados más interesantes de la investigación en la década de los 90 en el campo de la ingeniería del conocimiento. Por un lado, se ha profundizado en el conocimiento sobre cómo las personas resuelven problemas. Esto se ha logrado por la vía empírica mediante un trabajo científico de observación, experimentación por medios computacionales y generalización. Como resultado de esta línea, actualmente se dispone de un primer conjunto de modelos formales, los llamados problem-solving methods (PSM), muy útiles en el campo de la ingeniería informática como plantillas de diseño que guían la construcción de nuevos sistemas. Por otro lado, como logro adicional en este campo de investigación, se ha creado un nuevo lenguaje descriptivo como complemento a las formas de representación tradicionales. Dicho lenguaje, que ha sido aceptado por un amplio número de autores, se sitúa en un mayor nivel de abstracción y permite la formulación de arquitecturas más complejas de sistemas basados en el conocimiento. Como autores que más han contribuido en este aspecto se pueden citar: Luc Steels que propuso los denominados componentes de la experiencia como forma de unificación de trabajos previos en este campo, Bob Wielinga, Guus Schreiber y Jost Breuker en el campo de metodologías de ingeniería del conocimiento y el equipo de Mark Musen respecto a herramientas. Dicho lenguaje descriptivo ha supuesto además el planteamiento de una nueva generación de herramientas software de ayuda a los técnicos desarrolladores para construcción de este tipo de sistemas. El propósito principal del presente texto es servir de base como fuente de información de ambos aspectos recientes del campo de la ingeniería del conocimiento. El texto está dirigido a profesionales y estudiantes del campo de la informática que conocen técnicas básicas tradicionales de representación del conocimiento. La redacción del presente texto se ha orientado en primer lugar para recopilar y uniformizar la descripción de métodos existentes en la literatura de ingeniería de conocimiento. Se ha elegido un conjunto de métodos representativo en este campo que no cubre la totalidad de los métodos existentes pero sí los más conocidos y utilizados en ingeniería del conocimiento, presentando una descripción detallada de carácter tanto teórico como práctico. El texto describe cada método utilizando una notación común a todos ellos, parcialmente basada en los estándares descriptivos seguidos por las metodologías más extendidas. Para cada método se incluyen algoritmos definidos de forma expresa para el presente texto con ejemplos detallados de operación. Ambos aspectos, la uniformización junto a la presentación detallada de la operación, suponen una novedad interesante respecto al estado actual de la literatura sobre este campo, lo que hace el texto muy adecuado para ser utilizado como libro de consulta como apoyo en la docencia de la asignatura de construcción de sistemas inteligentes.

A Knowledge Model for Automatic Configuration of Traffic Messages

This paper describes a knowledge model for a configuration problem in the do-main of traffic control. The goal of this model is to help traffic engineers in the dynamic selection of a set of messages to be presented to drivers on variable message signals. This selection is done in a real-time context using data recorded by traffic detectors on motorways. The system follows an advanced knowledge-based solution that implements two abstract problem solving methods according to a model-based approach recently proposed in the knowledge engineering field. Finally, the paper presents a discussion about the advantages and drawbacks found for this problem as a consequence of the applied knowledge modeling ap-proach.

Terminological Importation for Adapting Reusable Knowledge Representation Components in the KSM Environment

This paper describes the adaptation approach of reusable knowledge representation components used in the KSM environment for the formulation and operationalisation of structured knowledge models. Reusable knowledge representation components in KSM are called primitives of representation. A primitive of representation provides: (1) a knowledge representation formalism (2) a set of tasks that use this knowledge together with several problem-solving methods to carry out these tasks (3) a knowledge acquisition module that provides different services to acquire and validate this knowledge (4) an abstract terminology about the linguistic categories included in the representation language associated to the primitive. Primitives of representation usually are domain independent. A primitive of representation can be adapted to support knowledge in a given domain by importing concepts from this domain. The paper describes how this activity can be carried out by mean of a terminological importation. Informally, a terminological importation partially populates an abstract terminology with concepts taken from a given domain. The information provided by the importation can be used by the acquisition and validation facilities to constraint the classes of knowledge that can be described using the representation formalism according to the domain knowledge. KSM provides the LINK-S language to specify terminological importation from a domain terminology to an abstract one. These terminologies are described in KSM by mean of the CONCEL language. Terminological importation is used to adapt reusable primitives of representation in order to increase the usability degree of such components in these domains. In addition, two primitives of representation can share a common vocabulary by importing common domain CONCEL terminologies (conceptual vocabularies). It is a necessary condition to make possible the interoperability between different, heterogeneous knowledge representation components in the framework of complex knowledge - based architectures.

Training project management complexity in postgraduate and continuing education programs: a learning strategy in the eshe (European Space of Higher Education) framework

The objective of this paper is to address the methodological process of a teaching strategy for training project management complexity in postgraduate programs. The proposal is made up of different methods —intuitive, comparative, deductive, case study, problem-solving Project-Based Learning— and different activities inside and outside the classroom. This integration of methods motivated the current use of the concept of “learning strategy”. The strategy has two phases: firstly, the integration of the competences —technical, behavioral and contextual—in real projects; and secondly, the learning activity was oriented in upper level of knowledge, the evaluating the complexity for projects management in real situations. Both the competences in the learning strategy and the Project Complexity Evaluation are based on the ICB of IPMA. The learning strategy is applied in an international Postgraduate Program —Erasmus Mundus Master of Science— with the participation of five Universities of the European Union. This master program is fruit of a cooperative experience from one Educative Innovation Group of the UPM -GIE-Project-, two Research Groups of the UPM and the collaboration with other external agents to the university. Some reflections on the experience and the main success factors in the learning strategy were presented in the paper

Training project management complexity in postgraduate and continuing education programs: a learning strategy in the eshe (European Space of Higher Education) framework

The objective of this paper is to address the methodological process of a teaching strategy for training project management complexity in postgraduate programs. The proposal is made up of different methods —intuitive, comparative, deductive, case study, problem-solving Project-Based Learning— and different activities inside and outside the classroom. This integration of methods motivated the current use of the concept of ―learning strategy‖. The strategy has two phases: firstly, the integration of the competences —technical, behavioral and contextual—in real projects; and secondly, the learning activity was oriented in upper level of knowledge, the evaluating the complexity for projects management in real situations. Both the competences in the learning strategy and the Project Complexity Evaluation are based on the ICB of IPMA. The learning strategy is applied in an international Postgraduate Program —Erasmus Mundus Master of Science— with the participation of five Universities of the European Union. This master program is fruit of a cooperative experience from one Educative Innovation Group of the UPM -GIE-Project-, two Research Groups of the UPM and the collaboration with other external agents to the university. Some reflections on the experience and the main success factors in the learning strategy were presented in the paper.