Implications of agricultural production, policy and land use changes on water resource assessment

Una gestión más eficiente y equitativa del agua a escala de cuenca no se puede centrar exclusivamente en el recurso hídrico en sí, sino también en otras políticas y disciplinas científicas. Existe un consenso creciente de que, además de la consideración de las cambiantes condiciones climáticas, es necesaria una integración de ámbitos de investigación tales como la agronomía, planificación del territorio y ciencias políticas y económicas a fin de satisfacer de manera sostenible las demandas de agua por parte de la sociedad y del medio natural. La Política Agrícola Común (PAC) es el principal motor de cambio en las tendencias de paisajes rurales y sistemas agrícolas, pero el deterioro del medio ambiente es ahora una de las principales preocupaciones. Uno de los cambios más relevantes se ha producido con la expansión e intensificación del olivar en España, principalmente con nuevas zonas de regadío o la conversión de olivares de secano a sistemas en regadío. Por otra parte, el cambio de las condiciones climáticas podría ejercer un papel importante en las tendencias negativas de las aportaciones a los ríos, pero no queda claro el papel que podrían estar jugando los cambios de uso de suelo y cobertura vegetal sobre las tendencias negativas de caudal observadas. Esta tesis tiene como objetivo mejorar el conocimiento de los efectos de la producción agrícola, política agraria y cambios de uso de suelo y cobertura vegetal sobre las condiciones de calidad del agua, respuesta hidrológica y apropiación del agua por parte de la sociedad. En primer lugar, el estudio determina las tendencias existentes de nitratos y sólidos en suspensión en las aguas superficiales de la cuenca del río Guadalquivir durante el periodo de 1998 a 2009. Desde una perspectiva de política agraria, la investigación trata de evaluar mediante un análisis de datos de panel las principales variables, incluyendo la reforma de la PAC de 2003, que están teniendo una influencia en ambos indicadores de calidad. En segundo lugar, la apropiación del agua y el nivel de contaminación por nitratos debido a la producción del aceite de oliva en España se determinan con una evaluación de la huella hídrica (HH), teniendo en cuenta una variabilidad espacial y temporal a largo de las provincias españolas y entre 1997 y 2008. Por último, la tesis analiza los efectos de los cambios de uso de suelo y cobertura vegetal sobre las tendencias negativas observadas en la zona alta del Turia, cabecera de la cuenca del río Júcar, durante el periodo 1973-2008 mediante una modelización ecohidrológica. En la cuenca del Guadalquivir cerca del 20% de las estaciones de monitoreo muestran tendencias significativas, lineales o cuadráticas, para cada indicador de calidad de agua. La mayoría de las tendencias significativas en nitratos están aumentando, y la mayoría de tendencias cuadráticas muestran un patrón en forma de U. Los modelos de regresión de datos de panel muestran que las variables más importantes que empeoran ambos indicadores de calidad del agua son la intensificación de biomasa y las exportaciones de ambos indicadores de calidad procedentes de aguas arriba. En regiones en las que el abandono agrícola y/o desintensificación han tenido lugar han mejorado las condiciones de calidad del agua. Para los nitratos, el desacoplamiento de las subvenciones a la agricultura y la reducción de la cuantía de las subvenciones a tierras de regadío subyacen en la reducción observada de la concentración de nitratos. Las medidas de modernización de regadíos y el establecimiento de zonas vulnerables a nitratos reducen la concentración en subcuencas que muestran una tendencia creciente de nitratos. Sin embargo, el efecto de las exportaciones de nitratos procedente de aguas arriba, la intensificación de la biomasa y los precios de los cultivos presentan un mayor peso, explicando la tendencia creciente observada de nitratos. Para los sólidos en suspensión, no queda de forma evidente si el proceso de desacoplamiento ha influido negativa o positivamente. Sin embargo, los mayores valores de las ayudas agrarias aún ligadas a la producción, en particular en zonas de regadío, conllevan un aumento de las tasas de erosión. Aunque la cuenca del Guadalquivir ha aumentado la producción agrícola y la eficiencia del uso del agua, el problema de las altas tasas de erosión aún no ha sido mitigado adecuadamente. El estudio de la huella hídrica (HH) revela que en 1 L de aceite de oliva español más del 99,5% de la HH está relacionado con la producción de la aceituna, mientras que menos del 0,5% se debe a otros componentes, es decir, a la botella, tapón y etiqueta. Durante el período estudiado, la HH verde en secano y en regadío representa alrededor del 72% y 12%, respectivamente, del total de la HH. Las HHs azul y gris representan 6% y 10%, respectivamente. La producción de aceitunas se concentra en regiones con una HH menor por unidad de producto. La producción de aceite de oliva ha aumentado su productividad del agua durante 1997-2008, incentivado por los crecientes precios del aceite, como también lo ha hecho la cantidad de exportaciones de agua virtual. De hecho, las mayores zonas productoras presentan una eficiencia alta del uso y de productividad del agua, así como un menor potencial de contaminación por nitratos. Pero en estas zonas se ve a la vez reflejado un aumento de presión sobre los recursos hídricos locales. El aumento de extracciones de agua subterránea relacionadas con las exportaciones de aceite de oliva podría añadir una mayor presión a la ya estresada cuenca del Guadalquivir, mostrando la necesidad de equilibrar las fuerzas del mercado con los recursos locales disponibles. Los cambios de uso de suelo y cobertura vegetal juegan un papel importante en el balance del agua de la cuenca alta del Turia, pero no son el principal motor que sustenta la reducción observada de caudal. El aumento de la temperatura es el principal factor que explica las mayores tasas de evapotranspiración y la reducción de caudales. Sin embargo, los cambios de uso de suelo y el cambio climático han tenido un efecto compensatorio en la respuesta hidrológica. Por un lado, el caudal se ha visto afectado negativamente por el aumento de la temperatura, mientras que los cambios de uso de suelo y cobertura vegetal han compensado positivamente con una reducción de las tasas de evapotranspiración, gracias a los procesos de disminución de la densidad de matorral y de degradación forestal. El estudio proporciona una visión que fortalece la interdisciplinariedad entre la planificación hidrológica y territorial, destacando la necesidad de incluir las implicaciones de los cambios de uso de suelo y cobertura vegetal en futuros planes hidrológicos. Estos hallazgos son valiosos para la gestión de la cuenca del río Turia, y el enfoque empleado es útil para la determinación del peso de los cambios de uso de suelo y cobertura vegetal en la respuesta hidrológica en otras regiones. ABSTRACT Achieving a more efficient and equitable water management at catchment scale does not only rely on the water resource itself, but also on other policies and scientific knowledge. There is a growing consensus that, in addition to consideration of changing climate conditions, integration with research areas such as agronomy, land use planning and economics and political science is required to meet sustainably the societal and environmental water demands. The Common Agricultural Policy (CAP) is a main driver for trends in rural landscapes and agricultural systems, but environmental deterioration is now a principal concern. One of the most relevant changes has occurred with the expansion and intensification of olive orchards in Spain, taking place mainly with new irrigated areas or with the conversion from rainfed to irrigated systems. Moreover, changing climate conditions might exert a major role on water yield trends, but it remains unclear the role that ongoing land use and land cover changes (LULCC) might have on observed river flow trends. This thesis aims to improve the understanding of the effects of agricultural production, policies and LULCC on water quality conditions, hydrological response and human water appropriation. Firstly, the study determines the existing trends for nitrates and suspended solids in the Guadalquivir river basin’s surface waters (south Spain) during the period from 1998 to 2009. From a policy perspective, the research tries to assess with panel data analysis the main drivers, including the 2003 CAP reform, which are having an influence on both water quality indicators. Secondly, water appropriation and nitrate pollution level originating from the production of olive oil in Spain is determined with a water footprint (WF) assessment, considering a spatial temporal variability across the Spanish provinces and from 1997 to 2008 years. Finally, the thesis analyzes the effects of the LULCC on the observed negative trends over the period 1973-2008 in the Upper Turia basin, headwaters of the Júcar river demarcation (east Spain), with ecohydrological modeling. In the Guadalquivir river basin about 20% of monitoring stations show significant trends, linear or quadratic, for each water quality indicator. Most significant trends of nitrates are augmenting than decreasing, and most significant quadratic terms of both indicators exhibit U-shaped patterns. The panel data models show that the most important drivers that are worsening nitrates and suspended solids in the basin are biomass intensification and exports of both water quality indicators from upland regions. In regions that agricultural abandonment and/or de-intensification have taken place the water quality conditions have improved. For nitrates, the decoupling of agricultural subsidies and the reduction of the amount of subsidies to irrigated land underlie the observed reduction of nitrates concentration. Measures of irrigation modernization and establishment of vulnerable zones to nitrates ameliorate the concentration of nitrates in subbasins showing an increasing trend. However, the effect of nitrates load from upland areas, intensification of biomass and crop prices present a greater weight leading to the final increasing trend in this subbasins group, where annual crops dominate. For suspended solids, there is no clear evidence that decoupling process have influenced negatively or positively. Nevertheless, greater values of subsidies still linked to production, particularly in irrigated regions, lead to increasing erosion rates. Although agricultural production has augmented in the basin and water efficiency in the agricultural sector has improved, the issue of high erosion rates has not yet been properly faced. The water footprint (WF) assessment reveals that for 1 L Spanish olive oil more than 99.5% of the WF is related to the olive fruit production, whereas less than 0.5% is due to other components i.e. bottle, cap and label. Over the studied period, the green WF in rainfed and irrigated systems represents about 72% and 12%, respectively, of the total WF. Blue and grey WFs represent 6% and 10%, respectively. The olive production is concentrated in regions with the smallest WF per unit of product. The olive oil production has increased its apparent water productivity from 1997 to 2008 incentivized by growing trade prices, but also did the amount of virtual water exports. In fact, the largest producing areas present high water use efficiency per product and apparent water productivity as well as less nitrates pollution potential, but this enhances the pressure on the available water resources. Increasing groundwater abstractions related to olive oil exports may add further pressure to the already stressed Guadalquivir basin. This shows the need to balance the market forces with the available local resources. Concerning the effects of LULCC on the Upper Turia basin’s streamflow, LULCC play a significant role on the water balance, but it is not the main driver underpinning the observed reduction on Turia's streamflow. Increasing mean temperature is the main factor supporting larger evapotranspiration rates and streamflow reduction. In fact, LULCC and climate change have had an offsetting effect on the streamflow generation during the study period. While streamflow has been negatively affected by increasing temperature, ongoing LULCC have positively compensated with reduced evapotranspiration rates, thanks to mainly shrubland clearing and forest degradation processes. The research provides insight for strengthening the interdisciplinarity between hydrological and spatial planning, highlighting the need to include the implications of LULCC in future hydrological plans. These findings are valuable for the management of the Turia river basin, as well as a useful approach for the determination of the weight of LULCC on the hydrological response in other regions.

Radio-echo sounding and ice volume estimates of western Nordenskiöld Land glaciers, Svalbard

As part of ongoing work to obtain a reliable estimate of the total ice volume of Svalbard glaciers and their potential contribution to sea-level rise, we present here volume calculations, with detailed error estimates, for ten glaciers on western Nordenskiöld Land, central Spitsbergen, Svalbard. The volume estimates are based upon a dense net of GPR-retrieved ice thickness data collected over several field campaigns spanning the period 1999-2012. On the basis of the pattern of scattering in theradargrams, we also analyse the hydrothermal structure of these glaciers.

Evaluación del potencial fotovoltaico del Campus Sur de la Universidad Politécnica de Madrid

El presente proyecto engloba el estudio del potencial fotovoltaico del Campus Sur de la Universidad Politécnica de Madrid. Este estudio se divide en tres partes. En primer lugar, se calcula la productividad del campus. En segundo lugar, se diseña la disposición de los generadores fotovoltaicos en los terrenos disponibles. Como paso final, se realiza un estudio económico de distintos supuestos. Para realizar los cálculos de productividad, se utiliza IESPRO, un programa desarrollado en Matlab©, junto con una aplicación complementaria desarrollada en el mismo lenguaje. Gracias a estos dos software es posible obtener una estimación muy realista de la energía anual generada. El aprovechamiento del terreno se estudia con la ayuda del software libre Sketchup©. Gracias a esta aplicación, es posible la reconstrucción del Campus Sur en 3D. Dicha reconstrucción incluye edificaciones y vegetación, facilitando la distribución de los generadores fotovoltaicos en todas las zonas, pudiendo evitar zonas con sombreado o no aptas para la instalación, y maximizando la utilización del terreno. El conjunto de los análisis anteriores permiten determinar el rendimiento energético del Campus Sur en sus distintas configuraciones, es decir, únicamente instalando generadores fotovoltaicos en las azoteas de los edificios, o la instalación en todo el terreno disponible, el cual incluye las azoteas y los descampados. Este rendimiento energético, comparado con el consumo anual de todo el campus, permite estimar el coste financiero de llevar a cabo la instalación y su rentabilidad, todo ello detallado en el estudio económico. El estudio económico se basa en dos supuestos, el primero de ellos, únicamente tiene en cuenta la instalación en las azoteas de los edificios. El segundo estudio, incluye los descampados y las azoteas. Con estos dos estudios se puede verificar la viabilidad del proyecto, facilitando datos concretos sobre las ventajas de cada uno de ellos. ABSTRACT. The aim of this work is to study the photovoltaic potential in the South Campus of the Polytechnic University of Madrid. The work has been divided into three parts. The first one is focused on the calculus of the solar harvesting productivity of the South Campus. The second part is centered in the development of the complete photovoltaic system layout design, taking into account the available placement. In the third part, an economic study considering several different scenarios is carried out. In order to calculate the solar productivity, the MATLAB based software tool IESPRO together with a complementary application developed in MATLAB as well, have been used. These programs allow to obtain an accurate estimation of the generated annual energy. The land use is studied with the help of free software SketchUp. With this application, it is possible to rebuild the South Campus in 3D. This reconstruction includes: buildings and vegetation, facilitating the distribution of photovoltaic generators in all areas, to avoid shaded or unsuitable areas for the installation, and maximizing land use. All the above analysis allow determining the energy efficiency of the South Campus for two different configurations, i.e., installing solar photovoltaic arrays only on the roofs of the buildings, or installing solar photovoltaic arrays throughout the land available, including vacant lots and rooftops. The facilities final cost and the cost effectiveness are estimated by comparing the energy efficiency with the South Campus total consumption. This study is based on two different scenarios: the first one considers the solar arrays installation in the buildings roofs, and the second one includes in the layout the vacant lots and rooftops. These studies allow verifying the feasibility of the project, and provide specific information related to the advantages and drawbacks of each scenario.

Potencial de la producción de bioelectricidad de las Comarcas Agrarias de la Comunidad de Madrid en base a centeno y triticale

En el presente trabajo se estudia la producción potencial de biomasa procedente de los cultivos de centeno y triticale en las seis comarcas agrarias de la Comunidad de Madrid (CM) y la posibilidad de su aplicación a la producción de bioelectricidad en cada una de ellas. En primer lugar se realiza un estudio bibliográfico de la situación actual de la bioelectricidad. Uno de los principales datos a tener en cuenta es que en el PER 2011- 2020 se estima que el total de potencia eléctrica instalada a partir de biomasa en España en el año 2020 sea de 1.350 MW, unas dos veces y media la existente a finales de 2010. Además, se comenta el estado de la incentivación del uso de biomasa de cultivos energéticos para producción de electricidad, la cual se regula actualmente según el Real Decreto-ley 9/2013, de 12 de Julio, por el que se adoptaron medidas urgentes para garantizar la estabilidad financiera del sistema eléctrico, y se consideran los criterios de sostenibilidad en el uso de biocombustibles sólidos. Se realiza una caracterización de las seis comarcas agrarias que forman la Comunidad Autónoma de Madrid: Área Metropolitana, Campiña, Guadarrama, Lozoya- Somosierra, Sur-Occidental y Vegas, la cual consta de dos partes: una descripción de la climatología y otra de la distribución de la superficie dedicada a barbecho y cultivos herbáceos. Se hace una recopilación bibliográfica de los modelos de simulación más representativos de crecimiento de los cultivos (CERES y Cereal YES), así como de ensayos realizados con los cultivos de centeno y triticale para la producción de biomasa y de estudios efectuados mediante herramientas GIS y técnicas de análisis multicriterio para la ubicación de centrales de bioelectricidad y el estudio de la logística de la biomasa. Se propone un modelo de simulación de la productividad de biomasa de centeno y de triticale para la CM, que resulta de la combinación de un modelo de producción de grano en base a datos climatológicos y a la relación biomasa/grano media de ambos cultivos obtenida en una experiencia previa. Los modelos obtenidos responden a las siguientes ecuaciones (siendo TN = temperatura media normalizada a 9,9 ºC y PN = precipitación acumulada normalizada a 496,7 mm): - Producción biomasa centeno (t m.s./ha) = 2,785 * [1,078 * ln(TN + 2*PN) + 2,3256] - Producción biomasa triticale (t m.s./ha) = 2,595 * [2,4495 * ln(TN + 2*PN) + 2,6103] Posteriormente, aplicando los modelos desarrollados, se cuantifica el potencial de producción de biomasa de centeno y triticale en las distintas comarcas agrarias de la CM en cada uno de los escenarios establecidos, que se consideran según el uso de la superficie de barbecho de secano disponible (25%, 50%, 75% y 100%). Las producciones potenciales de biomasa, que se podrían alcanzar en la CM utilizando el 100% de la superficie de barbecho de secano, en base a los cultivos de centeno y triticale, se estimaron en 169.710,72 - 149.811,59 - 140.217,54 - 101.583,01 - 26.961,88 y 1.886,40 t anuales para las comarcas de Campiña - Vegas, Sur - Occidental - Área Metropolitana - Lozoya-Somosierra y Guadarrama, respectivamente. Se realiza un análisis multicriterio basado en la programación de compromiso para definir las comarcas agrarias con mejores características para la ubicación de centrales de bioelectricidad en base a los criterios de potencial de biomasa, infraestructura eléctrica, red de carreteras, espacios protegidos y superficie de núcleos urbanos. Al efectuar el análisis multicriterio, se obtiene la siguiente ordenación jerárquica en base a los criterios establecidos: Campiña, Sur Occidental, Vegas, Área Metropolitana, Lozoya-Somosierra y Guadarrama. Mediante la utilización de técnicas GIS se estudia la localización más conveniente de una central de bioelectricidad de 2,2 MW en cada una de las comarcas agrarias y según el uso de la superficie de barbecho de secano disponible (25%, 50%, 75% y 100%), siempre que exista potencial suficiente. Para el caso de la biomasa de centeno y de triticale en base seca se considera un PCI de 3500 kcal/kg, por lo que se necesitarán como mínimo 17.298,28 toneladas para satisfacer las necesidades de cada una de las centrales de 2,2 MW. Se analiza el potencial máximo de bioelectricidad en cada una de las comarcas agrarias en base a los cultivos de centeno y triticale como productores de biomasa. Según se considere el 25% o el 100% del barbecho de secano para producción de biomasa, la potencia máxima de bioelectricidad que se podría instalar en cada una de las comarcas agrarias variaría entre 5,4 y 21,58 MW en la comarca Campiña, entre 4,76 y 19,05 MW en la comarca Vegas, entre 4,46 y 17,83 MW en la comarca Sur Occidental, entre 3,23 y 12,92 MW en la comarca Área Metropolitana, entre 0,86 y 3,43 MW en la comarca Lozoya Somosierra y entre 0,06 y 0,24 MW en la comarca Guadarrama. La potencia total que se podría instalar en la CM a partir de la biomasa de centeno y triticale podría variar entre 18,76 y 75,06 MW según que se utilice el 25% o el 100% de las tierras de barbecho de secano para su cultivo. ABSTRACT In this work is studied the potential biomass production from rye and triticale crops in the six Madrid Community (MC) agricultural regions and the possibility of its application to the bioelectricity production in each of them. First is performed a bibliographical study of the current situation of bioelectricity. One of the main elements to be considered is that in the PER 2011-2020 is estimated that the total installed electric power from biomass in Spain in 2020 was 1.350 MW, about two and a half times as at end 2010. Also is discussed the status of enhancing the use of biomass energy crops for electricity production, which is currently regulated according to the Real Decreto-ley 9/2013, of July 12, by which urgent measures were adopted to ensure financial stability of the electrical system, and there are considered the sustainability criteria in the use of solid biofuels. A characterization of the six Madrid Community agricultural regions is carried out: Area Metropolitana, Campiña, Guadarrama, Lozoya-Somosierra, Sur-Occidental and Vegas, which consists of two parts: a description of the climatology and another about the distribution of the area under fallow and arable crops. It makes a bibliographic compilation of the most representative crop growth simulation models (CERES and Cereal YES), as well as trials carried out with rye and triticale crops for biomass production and studies conducted by GIS tools and techniques multicriteria analysis for the location of bioelectricity centrals and the study of the logistics of biomass. Is proposed a biomass productivity simulation model for rye and triticale for MC that results from the combination of grain production model based on climatological data and the average relative biomass/grain of both crops obtained in a prior experience. The models obtained correspond to the following equations (where TN = normalized average temperature and PN = normalized accumulated precipitation): - Production rye biomass (t d.m./ha) = 2.785 * [1.078 * ln (TN + 2*PN) + 2.3256] - Production triticale biomass (t d.m./ha) = 2,595 * [2.4495 * ln (TN + 2*PN) + 2.6103] Subsequently, applying the developed models, the biomass potential of the MC agricultural regions is quantified in each of the scenarios established, which are considered as the use of dry fallow area available (25%, 50%, 75 % and 100%). The potential biomass production that can be achieved within the MC using 100% of the rainfed fallow area based on rye and triticale crops, were estimated at 169.710,72 - 149.811,59 - 140.217,54 - 101.583,01 - 26.961,88 and 1.886,40 t annual for the regions of Campiña, Vegas, Sur Occidental, Area Metropolitana, Lozoya- Somosierra and Guadarrama, respectively. A multicriteria analysis is performed, based on compromise programming to define the agricultural regions with better features for the location of bioelectricity centrals, on the basis of biomass potential, electrical infrastructure, road network, protected areas and urban area criteria. Upon multicriteria analysis, is obtained the following hierarchical order based on criteria: Campiña, Sur Occidental, Vegas, Area Metropolitana, Lozoya-Somosierra and Guadarrama. Likewise, through the use of GIS techniques, the most suitable location for a 2,2 MW bioelectricity plant is studied in each of the agricultural regions and according to the use of dry fallow area available (25%, 50% , 75% and 100%), if there is sufficient potential. In the case of biomass rye and triticale dry basis is considered a PCI of 3500 kcal/kg, so it will take at least 17,298.28 t to satisfy the needs of each plant. Is analyzed the maximum bioelectricity potential on each of the agricultural regions on the basis of the rye and triticale crops as biomass producers. As deemed 25% or 100% dry fallow for biomass, the maximum bioelectricity potential varies between 5,4 and 21,58 MW in the Campiña region, between 4,76 and 19,05 MW in the Vegas region, between 4,46 and 17,83 MW in the Sur Occidental region, between 3,23 and 12,92 MW in the Area Metropolitana region, between 0,86 and 3,43 MW in the Lozoya-Somosierra region and between 0,06 and 0,24 MW in the Guadarrama region. The total power that could be installed in the CM from rye and triticale biomass could vary between 18.76 and 75.06 MW if is used the 25% or 100% of fallow land for rainfed crop.

The role of land and water for trade and food production in Latin America: Environmental trade-offs of agricultural intensification versus extensification

One of humanity’s major challenges of the 21st century will be meeting future food demands on an increasingly resource constrained-planet. Global food production will have to rise by 70 percent between 2000 and 2050 to meet effective demand which poses major challenges to food production systems. Doing so without compromising environmental integrity is an even greater challenge. This study looks at the interdependencies between land and water resources, agricultural production and environmental outcomes in Latin America and the Caribbean (LAC), an area of growing importance in international agricultural markets. Special emphasis is given to the role of LAC’s agriculture for (a) global food security and (b) environmental sustainability. We use the International Model for Policy Analysis of Agricultural Commodities and Trade (IMPACT)—a global dynamic partial equilibrium model of the agricultural sector—to run different future production scenarios, and agricultural trade regimes out to 2050, and assess changes in related environmental indicators. Results indicate that further trade liberalization is crucial for improving food security globally, but that it would also lead to more environmental pressures in some regions across Latin America. Contrasting land expansion versus more intensified agriculture shows that productivity improvements are generally superior to agricultural land expansion, from an economic and environmental point of view. Finally, our analysis shows that there are trade-offs between environmental and food security goals for all agricultural development paths.

Identifying Potential Risks and Benefits of Using Cloud in Distributed Software Development.

Cloud-based infrastructure has been increasingly adopted by the industry in distributed software development (DSD) environments. Its proponents claim that its several benefits include reduced cost, increased speed and greater productivity in software development. Empirical evaluations, however, are in the nascent stage of examining both the benefits and the risks of cloud-based infrastructure. The objective of this paper is to identify potential benefits and risks of using cloud in a DSD project conducted by teams based in Helsinki and Madrid. A cross-case qualitative analysis is performed based on focus groups conducted at the Helsinki and Madrid sites. Participants observations are used to supplement the analysis. The results of the analysis indicated that the main benefits of using cloud are rapid development, continuous integration, cost savings, code sharing, and faster ramp-up. The key risks determined by the project are dependencies, unavailability of access to the cloud, code commitment and integration, technical debt, and additional support costs. The results revealed that if such environments are not planned and set up carefully, the benefits of using cloud in DSD projects might be overshadowed by the risks associated with it.

Ice volume estimates from ground-penetrating radar surveys, western Nordenskiöld Land glaciers, Svalbard

As part of ongoing work within the SvalGlac project aimed to obtain a reliable estimate of the total ice volume of Svalbard glaciers and their potential contribution to sea level rise, in this contribution we present volume calculations, with detailed error estimates, for ten glaciers on western Nordenskiöld Land, central Spitsbergen, Svalbard. The volume estimates are based upon a dense net of GPR-retrieved ice thickness data collected over several field campaigns spanning the period 1999-2012, all of them except one within 2010-2012. The total area and volume of the ensemble are 113.38±0.09 km2 and 10.439±0.185 km3, respectively, while the individual areas, volumes and average ice thickness lie within 2.5-49.1 km2, 0.08-5.48 km3 and 29-108 m, respectively. The maximum recorded ice thickness, 265±15 m, corresponds to Fridtjovbreen, which has also the largest average thickness (108±1m). Available empirical formulae for Svalbard glaciers overestimate the total volume of these glaciers by 24% with respect to our calculation. On the basis of the pattern of scattering in the radargrams, we also analyse the hydrothermal structure of these glaciers. Nine out of ten are polythermal, while only one is entirely cold.

Ice volume estimates from ground-penetrating radar surveys, Wedel Jarlsberg Land glaciers, Svalbard

One of the aims of the SvalGlac project is to obtain an improved estimate, with reliable error estimates, of the volume of Svalbard glaciers and their potential contribution to sea level rise. As part of this work, we present volume calculations, with detailed error estimates, for eight glaciers on Wedel Jarlsberg Land, southern Spitsbergen, Svalbard. The volume estimates are based upon a dense net of GPR-retrieved ice thickness data collected over several field campaigns spanning the period 2004-2011. The total area and volume of the ensemble are 502.9±18.6 km2 and 80.72±2.85 km3, respectively. Excluding Ariebreen (a tiny glacier, menor que 0.4 km2 in area), the individual areas, volumes and average ice thickness lie within 4.7-141.0 km2, 0.30-25.85 km3 and 64-183 m, respectively. The maximum recorded ice thickness, ca. 619±13 m, is found in Austre Torellbreen. To estimate the ice volume of small non-echo-sounded tributary glaciers, we used a function providing the best fit to the ice thickness along the centre line of a collection of such tributaries where echo-soundings were available, and assuming parabolic cross-sections. We did some tests on the effect on the measured ice volumes of the distinct radio-wave velocity (RWV) of firn as compared to ice, and cold versus temperate ice, concluding that the changes in volume implied by such corrections were within the error bounds of our volume estimate using a constant RWV for the entire glacier inferred from common mid-point measurements on the upper ablation area.

Assessing the impact of adaptive accessibility on the optimal transport policy implementation by using an integrated land-use/transport model for Madrid

Accessibility is an essential concept widely used to evaluate the impact of land-use and transport strategies in transport and urban planning. Accessibility is typically evaluated by using a transport model or a land-use model independently or successively without a feedback loop, thus neglecting the interaction effects between the two systems and the induced competition effects among opportunities due to accessibility improvements. More than a mere methodological curiosity, failure to account for land- use/transport interactions and the competition effect may result in large underestimation of the policy effects. With the recent development of land-use and transport interaction (LUTI) models, there is a growing interest in using these models to adequately measure accessibility and evaluate its impact. The current study joins this research stream by embedding an accessibility measure in a LUTI model with two main aims. The first aim is to account for adaptive accessibility, namely the adjustment of the potential accessibility due to the effect of competition among opportunities (e.g., workplaces) as a result of improved accessibility. LUTI models are particularly suitable for assessing adaptive accessibility because the competition factor is a function of the number of jobs, which is related to land-use attractiveness and the number of workers which is related, among other factors, to the transport demand. The second aim is to identify the optimal implementation scenario of policy measures on the basis of the potential and adaptive accessibility and analyse the results in terms of social welfare and accessibility. The metropolitan area of Madrid is used as a case-study and two transport policy instruments, namely a cordon toll and bus frequency increase, have been chosen for the simulation study in order to present the usefulness of the approach to urban planners and policy makers. The MARS model (Metropolitan Activity Relocation Simulator) calibrated for Madrid was employed as the analysis tool. The impact of accessibility is embedded in the model through a social welfare function that includes not only costs and benefits to both road users and transport operators, but also costs and benefits for the government and society in general (external costs). An optimisation procedure is performed by the MARS model for maximizing the value of objective function in order to find the best (optimal) policy imp lementations intensity (i.e., price, frequency). Last, the two policy strategies are evaluated in terms of their accessibility. Results show that the accessibility with competition factor influences the optimal policy implementation level and also generates different results in terms of social welfare. In addition, mapping the difference between the potential and the adaptive accessibility indicators shows that the main changes occur in areas where there is a strong competition among land-use opportunities.

Climate Change and Restoration of Degraded Land

The United Nations Climate Change Conference, Durban 2011, delivered a breakthrough on the international community's response to climate change. In the second largest meeting of its kind, the negotiations advanced, in a balanced fashion, the implementation of the Convention and the Kyoto Protocol, the Bali Action Plan, and the Cancun Agreements. The outcomes included a decision by Parties to adopt a universal legal agreement on climate change as soon as possible, and no later than 2015. One of the decisions adopted by COP 17 and CMP 7 regard to the land use, land-use change and forestry, and invites the Intergovernmental Panel on Climate Change to review and, if necessary, update supplementary methodologies for estimating anthropogenic greenhouse gas emissions by sources and removals by sinks resulting from land use, land-use change and forestry activities under Article 3, paragraphs 3 and 4, of the Kyoto Protocol. Land degradation is a human-induced or natural process which negatively affects the productivity of land within an ecosystem. The direct causes of land degradation are geographically specific. Climate change, including changes in short-term variation, as well as long-term gradual changes in temperature and precipitation, is expected to be an additional stress on rates of land degradation. Book Topics: • Introduction to Climate Change and Land Degradation • Change Mitigation • Climate Change and Waste Land Restoration • Water Management and Planning • Erosion and Hydrological Restoration • Forest Fire Land Restoration • Polluted Soils Restoration • Combating Climate Change by Restoration of Degraded Land • Research Matters – Climate Change Governance • Advanced Statistics Climate Change and Restoration of Degraded Land is of interests to academics, engineers, consultans, designers and professionals involved in restoration of degraded lands projects.

Short-term effects of four tillage practices on soil physical properties, soil water potential, and maize yield

The area cultivated using conservation tillage has recently increased in central Spain. However, soil compaction and water retention with conservation tillage still remains a genuine concern for landowners in this region be- cause of its potential effect on the crop growth and yield. The aim of this research is to determine the short- term influences of four tillage treatments on soil physical properties. In the experiment, bulk density, cone index, soil water potential, soil temperature and maize (Zea mays L.) productivity have been measured. A field experiment was established in spring of 2013 on a loamy soil. The experiment compared four tillage methods (zero tillage, ZT; reservoir tillage, RT; minimum tillage, MT; and conventional tillage, CT). Soil bulk density and soil cone index were measured during maize growing season and at harvesting time. Furthermore, the soil water potential was monitored by using a wireless sensors network with sensors at 20 and 40 cm depths. Also, soil temperatures were registered at depths of 5 and 12 cm. Results indicated that there were significant differ- ences between soil bulk density and cone index of ZT method and those of RT, MT, and CT, during the growing season; although, this difference was not significant at the time of harvesting in some soil layers. Overall, in most soil layers, tillage practice affected bulk density and cone index in the order: ZT N RT N MT N CT. Regardless oftheentireobservationperiod,results exhibited that soils under ZT and RT treatments usually resulted in higher water potential and lower soil temperature than the other two treatments at both soil depths. In addition, clear differences in maize grain yield were observed between ZT and CT treatments, with a grain yield (up to 15.4%) increase with the CT treatment. On the other hand, no significant differences among (RT, MT, and CT) on maizeyieldwerefound.Inconclusion,the impact of soil compaction increase and soil temperature decrease,pro- duced by ZT treatment is a potential reason for maize yield reduction in this tillage method. We found that RT could be certainly a viable option for farmers incentral Spain,particularly when switching to conservation tillage from conventional tillage. This technique showed a moderate and positive effect on soil physical properties and increased maize yields compared to ZT and MT, and provides an opportunity to stabilize maize yields compared to CT.

Propuesta de un modelo de sistema de información interorganizacional: aplicación en el sector de la domótica para la gestión de servicios del hogar digital

El sector de la edificación es uno de los principales sectores económicos en España y, además, es un componente básico de la actividad económica y social, debido a su importante papel como generador de empleo, proveedor de bienes e incentivador del crecimiento. Curiosamente, es uno de los sectores con menos regulación y organización y que, además, está formado mayoritariamente por empresas de pequeña y mediana dimensión (pymes) que, por su menor capacidad, a menudo, se quedan detrás de las grandes empresas en términos de adopción de soluciones innovadoras. La complejidad en la gestión de toda la información relacionada con un proyecto de edificación ha puesto de manifiesto claras ineficiencias que se traducen en un gasto innecesario bastante representativo. La información y los conocimientos aprendidos rara vez son transmitidos de una fase a otra dentro del proyecto de edificación y, mucho menos, reutilizados en otros proyectos similares. De este modo, no sólo se produce un gasto innecesario, sino que incluso podemos encontrar información contradictoria y obsoleta y, por tanto, inútil para la toma de decisiones. A lo largo de los años, esta situación ha sido motivada por la propia configuración del sector, poniendo de manifiesto la necesidad de una solución que pudiera solventar este reto de gestión interorganizacional. Así, la cooperación interorganizacional se ha convertido en un factor clave para mejorar la competitividad de las organizaciones, típicamente pymes, que componen el sector de la edificación. La información es la piedra angular de cualquier proceso de negocio. Durante la última década, una amplia gama de industrias han experimentado importantes mejoras de productividad con la aplicación eficiente de las TIC, asociadas, principalmente, a incrementos en la velocidad de proceso de información y una mayor coherencia en la generación de datos, accesibilidad e intercambio de información. La aplicación eficaz de las TIC en el sector de la edificación requiere una combinación de aspectos estratégicos y tácticos, puesto que no sólo se trata de utilizar soluciones puntuales importadas de otros sectores para su aplicación en diferentes áreas, sino que se buscaría que la información multi-agente estuviera integrada y sea coherente para los proyectos de edificación. El sector de la construcción ha experimentado un descenso significativo en los últimos años en España y en Europa como resultado de la crisis financiera que comenzó en 2007. Esta disminución está acompañada de una baja penetración de las TIC en la interorganizacionales orientadas a los procesos de negocio. El descenso del mercado ha provocado una desaceleración en el sector de la construcción, donde sólo las pymes flexibles han sido capaces de mantener el ritmo a pesar de la especialización y la innovación en los servicios adaptados a las nuevas demandas del mercado. La industria de la edificación está muy fragmentada en comparación con otras industrias manufactureras. El alto grado de esta fragmentación está íntimamente relacionado con un impacto significativo en la productividad y el rendimiento. Muchos estudios de investigación han desarrollado y propuesto una serie de modelos de procesos integrados. Por desgracia, en la actualidad todavía no se está en condiciones para la formalización de cómo debe ser la comunicación y el intercambio de información durante el proceso de construcción. El paso del proceso secuencial tradicional a los procesos de interdependencia recíproca sin lugar a duda son una gran demanda asociada a la comunicación y el flujo de información en un proyecto de edificación. Recientemente se está poniendo mucho énfasis en los servicios para el hogar como un primer paso hacia esta mejora en innovación ya que la industria de los servicios digitales interactivos tiene un alto potencial para generar innovación y la ventaja estratégica para las empresas existentes. La multiplicidad de servicios para el hogar digital (HD) y los proveedores de servicios demandan, cada vez más, la aparición de una plataforma capaz de coordinar a todos los agentes del sector con el usuario final. En consecuencia, las estructuras organizacionales tienden a descentralizarse en busca de esa coordinación y, como respuesta a esta demanda, se plantea, también en este ámbito, el concepto de cooperación interorganizacional. Por lo tanto, ambos procesos de negocio -el asociado a la construcción y el asociado a la provisión de servicios del hogar digital, también considerado como la propia gestión de ese hogar digital o edificio, inteligente o no- deben de ser vistos en su conjunto mediante una plataforma tecnológica que les dé soporte y que pueda garantizar la agregación e integración de los diversos procesos, relacionados con la construcción y gestión, que se suceden durante el ciclo de vida de un edificio. Sobre esta idea y atendiendo a la evolución permanente de los sistemas de información en un entorno de interrelación y cooperación daría lugar a una aplicación del concepto de sistema de información interorganizacional (SIIO). El SIIO proporciona a las organizaciones la capacidad para mejorar los vínculos entre los socios comerciales a lo largo de la cadena de suministro, por lo que su importancia ha sido reconocida por organizaciones de diversos sectores. Sin embargo, la adopción de un SIIO en diferentes ámbitos ha demostrado ser complicada y con una alta dependencia de las características particulares de cada sector, siendo, en este momento, una línea de investigación abierta. Para contribuir a esta línea de investigación, este trabajo pretende recoger, partiendo de una revisión de la literatura relacionada, un enfoque en un modelo de adopción de un SIIO para el objeto concreto de esta investigación. El diseño de un SIIO está basado principalmente, en la identificación de las necesidades de información de cada uno de sus agentes participantes, de ahí la importancia en concretar un modelo de SIIO en el ámbito de este trabajo. Esta tesis doctoral presenta el modelo de plataforma virtual de la asociación entre diferentes agentes del sector de la edificación, el marco de las relaciones, los flujos de información correspondientes a diferentes procesos y la metodología que subyace tras el propio modelo, todo ello, con el objeto de contribuir a un modelo unificado que dé soporte tanto a los procesos relacionados con la construcción como con la gestión de servicios en el hogar digital y permitiendo cubrir los requisitos importantes que caracterizan este tipo de proyectos: flexibilidad, escalabilidad y robustez. El SIIO se ha convertido en una fuente de innovación y una herramienta estratégica que permite a las pymes obtener ventajas competitivas. Debido a la complejidad inherente de la adopción de un SIIO, esta investigación extiende el modelo teórico de adopción de un SIIO de Kurnia y Johnston (2000) con un modelo empírico para la caracterización de un SIIO. El modelo resultante tiene como objetivo fomentar la innovación de servicios en el sector mediante la identificación de los factores que influyen en la adopción de un SIIO por las pymes en el sector de la edificación como fuente de ventaja competitiva y de colaboración. Por tanto, esta tesis doctoral, proyectada sobre una investigación empírica, proporciona un enfoque para caracterizar un modelo de SIIO que permita dar soporte a la gestión integrada de los procesos de construcción y gestión de servicios para el hogar digital. La validez del modelo de SIIO propuesto, como fuente y soporte de ventajas competitivas, está íntimamente relacionada con la necesidad de intercambio de información rápido y fiable que demandan los agentes del sector para mejorar la gestión de su interrelación y cooperación con el fin de abordar proyectos más complejos en el sector de la edificación, relacionados con la implantación del hogar digital, y contribuyendo, así a favorecer el desarrollo de la sociedad de la información en el segmento residencial. ABSTRACT The building industry is the largest industry in the world. Land purchase, building design, construction, furnishing, building equipment, operations maintenance and the disposition of real estate have an unquestionable prominence not only at economic but also at social level. In Spain, the building sector is one of the main drivers of economy and also a basic component of economic activity and its role in generating employment, supply of goods or incentive for growth is crucial in the evolution of the economy. Surprisingly, it is one of the sectors with less regulation and organization. Another consistent problem is that, in this sector, the majority of companies are small and medium (SMEs), and often behind large firms in terms of their adoption of innovative solutions. The complexity of managing all information related to this industry has lead to a waste of money and time. The information and knowledge gathered is frequently stored in multiple locations, involving the work of thousands of people, and is rarely transferred on to the next phase. This approach is inconsistent and makes that incorrect information is used for decisions. This situation needs a viable solution for interorganizational information management. So, interorganizational co-operation has become a key factor for organization competitiveness within the building sector. Information is the cornerstone of any business process. Therefore, information and communication technologies (ICT) offer a means to change the way business is conducted. During the last decade, significant productivity improvements were experienced by a wide range of industries with ICT implementation. ICT has provided great advantages in speed of operation, consistency of data generation, accessibility and exchange of information. The wasted money resulting from reentering information, errors and omissions caused through poor decisions and actions, and the delays caused while waiting for information, represent a significant percentage of the global benefits. The effective application of ICT in building construction sector requires a combination of strategic and tactical developments. The building sector has experienced a significant decline in recent years in Spain and in Europe as a result of the financial crisis that began in 2007. This drop goes hand in hand with a low penetration of ICT in inter-organizational-oriented business processes. The market decrease has caused a slowdown in the building sector, where only flexible SMEs have been able to keep the pace though specialization and innovation in services adapted to new market demands. The building industry is highly fragmented compared with other manufacturing industries. This fragmentation has a significant negative impact on productivity and performance. Many research studies have developed and proposed a number of integrated process models. Unfortunately, these studies do not suggest how communication and information exchange within the construction process can be achieved, without duplication or lost in quality. A change from the traditional sequential process to reciprocal interdependency processes would increase the demand on communication and information flow over the edification project. Focusing on home services, the digital interactive service industry has the potential to generate innovation and strategic advantage for existing business. Multiplicity of broadband home services (BHS) and suppliers suggest the need for a figure able to coordinate all the agents in sector with the final user. Consequently, organizational structures tend to be decentralized. Responding to this fact, the concept of interorganizational co-operation also is raising in the residential market. Therefore, both of these business processes, building and home service supply, must be complemented with a technological platform that supports these processes and guarantees the aggregation and integration of the several services over building lifecycle. In this context of a technological platform and the permanent evolution of information systems is where the relevance of the concept of inter-organizational information system (IOIS) emerges. IOIS improves linkages between trading partners along the supply chain. However, IOIS adoption has proved to be difficult and not fully accomplished yet. This research reviews the literature in order to focus a model of IOIS adoption. This PhD Thesis presents a model of virtual association, a framework of the relationships, an identification of the information requirements and the corresponding information flows, using the multi-agent system approach. IOIS has become a source of innovation and a strategic tool for SMEs to obtain competitive advantage. Because of the inherent complexity of IOIS adoption, this research extends Kurnia and Johnston’s (2000) theoretical model of IOIS adoption with an empirical model of IOIS characterization. The resultant model aims to foster further service innovation in the sector by identifying the factors influencing IOIS adoption by the SMEs in the building sector as a source of competitive and collaborative advantage. Therefore, this PhD Thesis characterizes an IOIS model to support integrated management of building processes and home services. IOIS validity, as source and holder of competitive advantages, is related to the need for reliable information interchanges to improve interrelationship management. The final goal is to favor tracking of more complex projects in building sector and to contribute to consolidation of the information society through the provision of broadband home services and home automation.

Land cover dynamics and climate change implications on water resources in South Pacific Costa Rica

Water is fundamental to human life and the availability of freshwater is often a constraint on human welfare and economic development. Consequently, the potential effects of global changes on hydrology and water resources are considered among the most severe and vital ones. Water scarcity is one of the main problems in the rural communities of Central America, as a result of an important degradation of catchment areas and the over-exploitation of aquifers. The present Thesis is focused on two critical aspects of global changes over water resources: (1) the potential effects of climate change on water quantity and (2) the impacts of land cover and land use changes on the hydrological processes and water cycle. Costa Rica is among the few developing countries that have recently achieved a land use transition with a net increase in forest cover. Osa Region in South Pacific Costa Rica is an appealing study site to assess water supply management plans and to measure the effects of deforestation, forest transitions and climate change projections reported in the region. Rural Community Water Supply systems (ASADAS) in Osa are dealing with an increasing demand of freshwater due to the growing population and the change in the way of life in the rural livelihoods. Land cover mosaics which have resulted from the above mentioned processes are characterized by the abandonment of marginal farmland with the spread over these former grasslands of high return crops and the expansion of secondary forests due to reforestation initiatives. These land use changes have a significant impact on runoff generation in priority water-supply catchments in the humid tropics, as evidenced by the analysis of the Tinoco Experimental Catchment in the Southern Pacific area of Costa Rica. The monitoring system assesses the effects of the different land uses on the runoff responses and on the general water cycle of the basin. Runoff responses at plot scale are analyzed for secondary forests, oil palm plantations, forest plantations and grasslands. The Oil palm plantation plot presented the highest runoff coefficient (mean RC=32.6%), twice that measured under grasslands (mean RC=15.3%) and 20-fold greater than in secondary forest (mean RC=1.7%). A Thornthwaite-type water balance is proposed to assess the impact of land cover and climate change scenarios over water availability for rural communities in Osa Region. Climate change projections were obtained by the downscaling of BCM2, CNCM3 and ECHAM5 models. Precipitation and temperature were averaged and conveyed by the A1B, A2 and B1 IPCC climate scenario for 2030, 2060 and 2080. Precipitation simulations exhibit a positive increase during the dry season for the three scenarios and a decrease during the rainy season, with the highest magnitude (up to 25%) by the end of the 21st century under scenario B1. Monthly mean temperature simulations increase for the three scenarios throughout the year with a maximum increase during the dry season of 5% under A1B and A2 scenarios and 4% under B1 scenario. The Thornthwaite-type Water Balance model indicates important decreases of water surplus for the three climate scenarios during the rainy season, with a maximum decrease on May, which under A1B scenario drop up to 20%, under A2 up to 40% and under B1 scenario drop up to almost 60%. Land cover scenarios were created taking into account current land cover dynamics of the region. Land cover scenario 1 projects a deforestation situation, with forests decreasing up to 15% due to urbanization of the upper catchment areas; land cover scenario 2 projects a forest recovery situation where forested areas increase due to grassland abandonment on areas with more than 30% of slope. Deforestation scenario projects an annual water surplus decrease of 15% while the reforestation scenario projects a water surplus increase of almost 25%. This water balance analysis indicates that climate scenarios are equal contributors as land cover scenarios to future water resource estimations.

Economics of Wheat in Egypt

Este estudio pretende estimar la eficiencia y la productividad de las principales provincias de la producción de trigo en Egipto. Los datos utilizados en este estudio son datos de panel a nivel de provincias del período 1990-2012, obtenidos del Ministerio de Agricultura y Recuperación Tierras, y de la Agencia Central de Movilización Pública y Estadística, Egipto. Se aplica el enfoque de fronteras estocásticas para medir la eficiencia (función de producción de Cobb-Douglas) y se emplean las especificaciones de Battese y Coelli (1992) y (1995). También se utiliza el índice de Malmquist como una aproximación no paramétrica (Análisis de Envolvente de Datos) para descomponer la productividad total de los factores de las principales provincias productoras de trigo en Egipto en cambio técnico y cambio de eficiencia. El coeficiente de tierra es positivo y significativo en los dos especificaciones Battese y Coelli (1992) y (1995), lo que implica que aumentar la tierra para este cultivo aumentaría significativamente la producción de trigo. El coeficiente de trabajo es positivo y significativo en la especificación de Battese y Coelli (1992), mientras que es positivo y no significativo en la especificación de Battese y Coelli (1995). El coeficiente de la maquinaria es negativo y no significativo en las dos especificaciones de Battese y Coelli (1992) y (1995). El coeficiente de cambio técnico es positivo y no significativo en la especificación de Battese y Coelli (1992), mientras que es positiva y significativo en la especificación de Battese y Coelli (1995). Las variables de efectos del modelo de ineficiencia Battese y Coelli (1995) indican que no existe impacto de las diferentes provincias en la producción de trigo en Egipto; la ineficiencia técnica de la producción de trigo tendió a disminuir durante el período de estudio; y no hay ningún impacto de género en la producción de trigo en Egipto. Los niveles de eficiencia técnica varían entre las diferentes provincias para las especificaciones de Battese y Coelli (1992) y (1995); el nivel mínimo medio de eficiencia técnica es 91.61% en la provincia de Fayoum, mientras que el nivel máximo medio de la eficiencia técnica es 98.69% en la provincia de Dakahlia. La eficiencia técnica toma un valor medio de 95.37%, lo que implica poco potencial para mejorar la eficiencia de uso de recursos en la producción de trigo. La TFPCH de la producción de trigo en Egipto durante el período 1990-2012 tiene un valor menor que uno y muestra un declive. Esta disminución es debida más al componente de cambio técnico que al componente de cambio de eficiencia. La disminución de TFPCH mejora con el tiempo. La provincia de Menoufia tiene la menor disminución en TFPCH, 6.5%, mientras que dos provincias, Sharkia y Dakahlia, son las que más disminuyen en TFPCH, 13.1%, en cada uno de ellas. Menos disminución en TFPCH ocurre en el período 2009-2010, 0.3%, mientras que más disminución se produce en TFPCH en el período 1990-1991, 38.9%. La disminución de la PTF de la producción de trigo en Egipto se atribuye principalmente a la mala aplicación de la tecnología. ABSTRACT The objectives of this study are to estimate the efficiency and productivity of the main governorates of wheat production in Egypt. The data used in this study is a panel data at the governorates level, it represents the time period 1990-2012 and taken from the Ministry of Agriculture and Land Reclamation, and the Central Agency for Public Mobilization and Statistics, Egypt. We apply the stochastic frontier approach for efficiency measurement (Cobb-Douglas production function) and the specifications of Battese and Coelli (1992) and (1995) are employed. Also we use Malmquist TFP index as a non-parametric approach (DEA) to decompose total factor productivity of the main governorates of wheat production in Egypt into technical change and efficiency change. The coefficient of land is positive and significant at Battese and Coelli (1992) and (1995) specifications, implying that increasing the wheat area could significantly enhance the production of wheat. The coefficient of labor is positive and significant at Battese and Coelli (1992) specification, while it is positive and insignificant at Battese and Coelli (1995) specification. The coefficient of machinery is negative and insignificant at the specifications of Battese and Coelli (1992) and (1995). The technical change coefficient is positive and insignificant at Battese and Coelli (1992) specification, while it is positive and significant at Battese and Coelli (1995) specification. The variables of the inefficiency effect model indicate that there is no impact from the location of the different governorates on wheat production in Egypt, the technical inefficiency of wheat production tended to decrease through the period of study, and there is no impact from the gender on wheat production in Egypt. The levels of technical efficiency vary among the different governorates for the specifications of Battese and Coelli (1992) and (1995); the minimum mean level of technical efficiency is 91.61% at Fayoum governorate, while the maximum mean level of technical efficiency is 98.69% at Dakahlia governorate. The technical efficiency takes an average value of 95.37%, this implying that little potential exists to improve resource use efficiency in wheat production. The TFPCH of wheat production in Egypt during the time period 1990-2012 has a value less than one and shows a decline; this decline is due mainly to the technical change component than the efficiency change component. The decline in TFPCH is generally improves over time. Menoufia governorate has the least declining in TFPCH by 6.5%, while two governorates, Sharkia and Dakahlia have the most declining in TFPCH by 13.1% for each of them. The least declining in TFPCH occurred at the period 2009- 2010 by 0.3%, while the most declining in TFPCH occurred at the period 1990-1991 by 38.9%. The declining in TFP of wheat production in Egypt is attributed mainly to poor application of technology.

Approach to the potential production of giant reed in surplus saline lands of Spain

Growing energy crops on marginal land has been promoted as a way of ensuring that biomass production involves an acceptable and sustainable use of land. Saline and saline-prone agricultural lands represent an opportunity for growing energy crops avoiding the displacement of food production and contributing to restoration of degraded land. Giant reed (Arundo donax L.) is a perennial grass that has been proposed as a promising energy crop for lignocellulosic biomass production while its tolerance to salinity has been proved. In this work, the identification of surplus saline lands that could be irrigated with saline waters for growing tolerant-energy crops (giant reed) in the mainland of Spain and the assessment of the agronomically attainable yield in these limiting growing conditions were undertaken. To this purpose, a GIS analysis was conducted using geodatabases related to saline areas, agro-climatic conditions, irrigation water requirements, agricultural land availability, restrictions regarding the range of electrical conductivity tolerated by the crop, competition with agro-food crops and irrigation water provisions. According to the approach developed, the irrigated and saline agricultural area available and suitable for biomass production from giant reed amounted up to 34 412 ha. The agronomically attainable yield in these limiting conditions was estimated at 12.7 – 22.2 t dm ha−1 yr−1 and the potential production of lignocellulosic biomass, 597 338 t dm yr−1. The methodology followed in this study can be applied to other target regions; it allows the identification of this type of marginal lands, where salinity-tolerant plant species could be grown for bioenergy purposes, avoiding competition with agro-food crops, and where soil restoration measurements should be undertaken.