Development of novel melt-processable biopolymer nanocomposites based on poly(L-lactic acid) and WS2 inorganic nanotubes.

The use of tungsten disulphide inorganic nanotubes (INT-WS2) offers the opportunity to produce novel and advanced biopolymer-based nanocomposite materials with excellent nanoparticle dispersion without the need for modifiers or surfactants via conventional melt blending. The study of the non-isothermal melt-crystallization kinetics provides a clear picture of the transformation of poly(L-lactic acid) (PLLA) molecules from the non-ordered to the ordered state. The overall crystallization rate, final crystallinity and subsequent melting behaviour of PLLA were controlled by both the incorporation of INT-WS2 and the variation of the cooling rate. In particular, it was shown that INT-WS2 exhibits much more prominent nucleation activity on the crystallization of PLLA than other specific nucleating agents or nano-sized fillers. These features may be advantageous for the enhancement of mechanical properties and process-ability of PLLA-based materials. PLLA/INT-WS2 nanocomposites can be employed as low cost biodegradable materials for many eco-friendly and medical applications, and the exceptional crystallization behaviour observed opens new perspectives for scale-up and broader applications.

Robust fabrication of electrospun-like polymer mats to direct cell bahaviour

Currently, cell culture systems that include nanoscale topography are widely used in order to provide cells additional cues closer to the in vivo environment, seeking to mimic the natural extracellular matrix. Electrospinning is one of the most common techniques to produce nano fiber mats. However, since many sensitive parameters play an important role in the process, a lack of reproducibility is a major drawback. Here we present a simple and robust methodology to prepare reproducible electrospun-like samples. It consists of a polydimethylsiloxane mold reproducing the fiber pattern to solvent-cast a polymer solution and obtain the final sample. To validate this methodology, poly(L-lactic) acid (PLLA) samples were obtained and, after characterisation, bioactivity and ability to direct cell response were assessed. C2C12 myoblasts developed focal adhesions on the electrospun-like fibers and, when cultured under myogenic differentiation conditions, similar differentiation levels to electrospun PLLA fibers were obtained.

Protein diagenesis in Patella shells: implications for amino acid racemisation dating

Se analiza la racemización de aminoácidos en proteínas inter e intracristalinas en conchas de Patella y su utilización como herramienta geocronológica, fundamentalmente empleadas en yacimientos arqueológicos.The inter- and intra-crystalline fractions of Patella vulgata limpets recovered from archaeological sites in Northern Spain (covering Neolithic, Mesolithic, Magdalenian, Solutrean, and Aurignacian periods) were examined for amino acid composition and racemisation over time. The calcitic apex and rim areas of the shells were found to probably be composed of similar proteins, as the D/L values and amino acids were comparable and varied in the same way with increasing age; however, the mineral structures present in these areas differed. The aragonitic intermediate part of the shell showed a distinctly different amino acid composition and mineral structure. The main protein leaching from the inter-crystalline fraction occurred within the first 6000 yr after the death of the organism. In contrast, the intra-crystalline fraction — comprised of a different protein composition than the inter-crystalline fraction — appeared to behave as a closed system for at least 34 ka, as reflected by the lack of a significant decrease in the amino acid content; however, changes in the amino acid percentages occurred during this period. The concentration of aspartic acid remained almost constant with age both in inter- and intra-crystalline proteins, and its contribution to the total amino acid content increased with age at the expense of other amino acids such as glutamic acid, serine, glycine and alanine. Temperature is thought to play a key role in the amino acid racemisation of P. vulgata and could explain why in the localities belonging to the Gravettian and Solutrean period, which formed during relatively cold conditions, D/L values were similar to those detected in shells from sites formed during the Magdalenian.

Influence of the molecular architecture on the secondary relaxations of Poly(styrene-co-methylmethacrylate) copolymers

The processes of adsorption of grafted copolymers onto negatively charged surfaces were studied using a dissipative quartz crystal microbalance (D-QCM) and ellipsometry. The control parameters in the study of the adsorption are the existence or absence on the molecular architecture of grafted polyethyleneglycol (PEG) chains with different lengths and the chemical nature of the main chain, poly(allylamine) (PAH) or poly(L-lysine) (PLL). It was found out that the adsorption kinetics of the polymers showed a complex behavior. The total adsorbed amount depends on the architecture of the polymer chains (length of the PEG chains), on the polymer concentration and on the chemical nature of the main chain. The comparison of the thicknesses of the adsorbed layers obtained from D-QCM and from ellipsometry allowed calculation of the water content of the layers that is intimately related to the grafting length. The analysis of D-QCM results also provides information about the shear modulus of the layers, whose values have been found to be typical of a rubber-like polymer system. It is shown that the adsorption of polymers with a charged backbone is not driven exclusively by the electrostatic interactions, but the entropic contributions as a result of the trapping of water in the layer structure are of fundamental importance.

Análisis de las diferencias en el crecimiento vegetativo, en los componentes del rendimiento y en la composición de las uvas y vinos del cv. cabernet sauvignon (vitis vinifera L.), producidos por el déficit hídrico durante pre-envero y post-envero

La presente Tesis Doctoral se realizó con el fin de estimar conjuntamente la respuesta agronómica y fisiológica de la vid (Vitis vinifera L.), así como los efectos sobre la evolución de la maduración, composición y la calidad de la uva y del vino, bajo la aplicación de diferentes déficit hídricos en pre-envero y post-envero, dentro de un marco de referencia de cambio climático. La variación climática que prevén los estudios sobre el cambio climático, resulta un factor decisivo en la eficiencia del uso del agua en la vid. En zonas cálidas, las estrategias de cultivo del viñedo frente al cambio climático deben de ir dirigidas a atenuar sus efectos sobre el crecimiento y el desarrollo de la vid, haciéndose imprescindible el estudio pormenorizado del déficit hídrico como factor decisivo en la obtención de las uvas adecuadas, ya que son la clave indispensable para el éxito en la elaboración del vino, y de forma muy especial en los vinos enfocados a un sector de alta calidad. El ensayo se llevó a cabo en un viñedo comercial de Bodegas Licinia, en la Comunidad de Madrid, durante los años 2010 y 2011. La variedad estudiada fue Cabernet sauvignon / 41 B, plantada a un marco de plantación de 3 m x 1 m, con un guiado vertical de la vegetación. El dispositivo experimental fue totalmente al azar, y se establecieron 4 tratamientos experimentales con 4 grados de disponibilidad hídrica, déficit moderado continuo (T0,45-0,6), déficit severo continuo (T0-0,3), déficit severo después de envero (T0,45-0,3) y déficit severo antes de envero (T0-0,6). En cada tratamiento se distribuyeron 3 repeticiones. El año 2010 fue el más lluvioso de los años de ensayo, con 478 mm de precipitaciones anuales, lo que supuso 146 mm más que en el año 2011. Su distribución a lo largo del ciclo fue más homogénea en el año 2010, mientras que en 2011 las precipitaciones contabilizadas en el período de maduración de la uva fueron nulas. La temperatura media subió 0,9ºC en 2011, respecto a 2010 y en cuanto a la integral térmica eficaz, en 2011 se acumularon, desde el 1 de abril hasta el final de ciclo, 217 grados•día más que en 2010. El déficit hídrico en pre-envero, modificó notablemente el crecimiento vegetativo y la producción de cosecha de la parcela de ensayo, no así la fertilidad de las yemas. El tratamiento con mayor disponibilidad hídrica (T0,45-0,6) obtuvo el mayor peso de baya, y los tratamientos con menor déficit hídrico en pre-envero (T0,45-0,6 y T0,45-0,3) registraron los mayores rendimientos de cosecha, mientras que las menores tasas de cuajado correspondieron al tratamiento con un déficit severo continuo (T0-0,3). La parcela de ensayo se caracterizó por un exceso de vigor y un alto crecimiento vegetativo. El pH del mosto se vio afectado por el déficit hídrico, disminuyendo su valor en el tratamiento de déficit hídrico severo antes de envero (T0-0,6). Organolépticamente, no se percibieron diferencias significativas en los vinos elaborados en función del déficit hídrico, y respecto a su composición físico-química, solo existieron diferencias en la concentración de ácido L-Málico, con mayores concentraciones en los tratamientos sin déficit hídrico en pre-envero, T0,45-0,6 y T0,45-0,3. El déficit hídrico modificó notablemente el color del vino, aumentando los valores de las coordenadas CIELAB a* y b*, la luminosidad (L*), croma (C*) y tonalidad (H*), para los tratamientos con un déficit severo en pre-envero (T0-0,3 y T0-0,6) y disminuyendo estas en el tratamiento con mayor disponibilidad hídrica (T0,45-0,6). Del mismo modo, mediante el análisis de color por métodos tradicionales, IPT e IC de los vinos, aumentó en los tratamientos con mayor déficit hídrico en pre-envero (T0-0,3 y T0-0,6), respecto a los tratamientos de mayor disponibilidad (T0,45-0,6 y T0,45-0,3). La concentración de taninos de la baya en vendimia, no se vio afectada por el déficit hídrico, aunque sí estuvo relacionada positivamente con el tamaño de las bayas. Organolépticamente, los hollejos del año 2011 resultaron con menor frescura, acidez, afrutado, sensación herbácea e intensidad tánica, aunque con mayor astringencia respecto a 2010. Las pepitas fueron más astringentes y aromáticas pero menos crujientes, sin llegar a los niveles de madurez del año 2010. El catador relacionó los taninos con la calidad del vino, asociándolos con un mayor cuerpo, acidez, intensidad, equilibrio gustativo, amargor y menor astringencia en la fase gustativa. La concentración de taninos en los vinos se vio favorecida con el déficit hídrico en pre-envero y post-envero. Los tratamientos con mayor déficit hídrico en pre-envero, T0-0,6 y T0-0,3, obtuvieron las menores concentraciones de potasio en mostos y vinos. Las relaciones entre la concentración de potasio, ácido L-Málico y el porcentaje de color rojo puro (dA(%)) resultaron altamente significativas, de modo que las mayores tasas de potasio en el vino se asociaron a los valores más bajos de color rojo y a los mayores de ácido L-Málico. ABSTRACT The present Doctoral Thesis has been done in order to estimate the grapevine (Vitis vinifera L.) agronomic and physiologic performance or response as well as the impact in the grape and wine maturity, composition and quality evolution, with different water deficits. The variation in climate that the global warming studies for seen is a key factor for the grapevine water use efficiency. In warm areas the farming vineyards strategy to face the climatic change, should be focused on diminish the effects on the grapevine growth and development, so that the water deficit detailed analysis becomes decisive to obtain the appropriate grapes, that are the main subject for a successful wine production and especially for top quality wines. The trial was carried out in a commercial vineyard in Chinchón (Madrid), Licinia winery, during the 2010 and 2011 seasons. The grape variety studied was Cabernet Sauvignon grafted onto 41B with a vine spacing 3m x 1m trained as VSP. Experimental design consisted on 4 irrigation treatments with 3 replications totally randomized. Irrigation treatments were: moderate regulated deficit (T0,45-0,6), severe continuous deficit (T0-0,3), severe post-veraison deficit (T0,45-0,3) and severe pre veraison deficit (T0-0,6). The 2010 was rainier year than the 2011; Total annual rain in 2010 was 478 mm, which resulted in 146 mm more than in 2011. The distribution along the vine cycle was more homogeneous in the 2010, whereas precipitations in 2011 along the grape maturity period were nonexistent. The average temperature in 2011 was 0,9ºC higher than that of the 2010 and regarding to the thermal integral, in the 2011 from 1st April to the end of the growing cycle, was 217 degrees•day higher than that in 2010. Water deficit significantly modified the vegetative growth and yield but, it did not modified bud fertility. The treatment with the highest water availability (T0,45-0,6) got the highest berry size, the lowest berry set rates were found in the severe continuous deficit treatment (T0-0,3). The plot studied in this trial was characterized by both excessive vigour and vegetative growth. Water deficit modified the pH must by, reducing it in the severe water deficit during pre-veraison (T0-0,6). There were not differences in wine tasting between the water deficits treatments. Regarding to the physical-chemical composition, it only existed differences in the L-malic acid concentration, resulting higher concentrations in the water deficit pre-veraison treatments: T0,45-0,6 y T0,45-0,3. Water deficit significantly modified wine colour by, increasing the CIELAB coordinates a* and b*, the brightness (L*), croma (C*) and tonality (H*), in the lower water availability pre-veraison treatments (T0-0,3 y T0-0,6), and reducing them in the in the moderate continuous water deficit ones (T0,45-0,6). By means of traditional wine colour parameters analyses, red colour percentage, TPI, they became higher in the lower water availability pre-veraison treatments (T0-0,3 y T0-0,6), than in those with higher availability (T0,45-0,6 y T0,45-0,3). At harvest, berry tannins concentrations was not affected by the water deficit although it did in a positive way, in the berry size. Berry tasting in 2011, resulted in a lower freshness, acidity, fruity, herbaceous flavour and tannic intensity, but with higher astringency respect to the 2010 season. Seeds, in 2011, were more astringent and aromatic as in the 2010, but less crunchy, without getting to the point of maturity. The taster linked the tannins to wine quality, associating them with a higher bodiest wine, acidity, intensity, taste balance, bitterness and with a lower astringency in the tasting stage. Treatments with a higher water deficit up to veraison T0-0,6 y T0-0,3 got less musts and wines potassium concentration. The relation between L-malic acid and the full red color percentage (dA(%)), were highly related, resulting the higher potassium content the lower wine quality.

Building functional surfaces for biosensors development

Polyelectrolyte multilayers (PEM) built by layer-by-layer technique have been extensively studied over the last years, resulting in a wide variety of current and potential applications. This technique can be used to construct thin films with different functionalities, or to functionalize surfaces with substantial different properties of those of the underlying substrates. The multilayering process is achieved by the alternate adsorption of oppositely charged polyelectrolytes. In this work we get advantage of the protein resistant property of the Poly (l-lysine)-graft-(polyethyleneglycol) to create protein patterns. Proteins can be immobilized on a surface by unspecific physical adsorption, covalent binding or through specific interactions. The first protein used in this work was laccase, a copper-containing redox enzyme that catalyse the oxidation of a broad range of polyphenols and aromatic substrates, coupled to the reduction of O2 to H2O without need of cofactors. Applications of laccases have been reported in food, pulp, paper, and textile industry, and also in biosensor development. Some uses require the immobilization of the enzyme on solid supports by adsorption, covalent attachment, entrapment, etc, on several substrates. Especially for biosensor development, highly active, stable and reproducible immobilization of laccase is required.

Strain rate effect on semi‐crystalline plla mechanical properties measured by instrumented indentation tests

Poly(L‐lactide) is a widely studied biomaterial, currently approved for use in a range of medical devices. Its mechanical properties can be tailored giving the material different crystallinity degrees. PLLA presents a complex non‐linear behaviour that depends not only on structural parameters such as crystallinity degree but also on external parameters such as strain rate and temperature. Failure of polymeric implants is attributed to their intrinsic time‐dependent performance under static loading conditions.

Combine use of Selected Schizosaccharomyces pombe and Lachancea thermotolerans Yeast Strains as an Alternative to the Traditional Malolactic Fermentation in Red Wine Production

Most red wines commercialized in the market use the malolactic fermentationprocess in order to ensure stability from a microbiological point of view. In this secondfermentation, malic acid is converted into L-lactic acid under controlled setups. Howeverthis process is not free from possible collateral effects that on some occasions produceoff-flavors, wine quality loss and human health problems. In warm viticulture regions suchas the south of Spain, the risk of suffering a deviation during the malolactic fermentationprocess increases due to the high must pH. This contributes to produce wines with highvolatile acidity and biogenic amine values. This manuscript develops a new red winemakingmethodology that consists of combining the use of two non-Saccharomyces yeast strains asan alternative to the traditional malolactic fermentation. In this method, malic acid is totallyconsumed by Schizosaccharomyces pombe, thus achieving the microbiological stabilizationobjective, while Lachancea thermotolerans produces lactic acid in order not to reduce andeven increase the acidity of wines produced from low acidity musts. This technique reducesthe risks inherent to the malolactic fermentation process when performed in warm regions.The result is more fruity wines that contain less acetic acid and biogenic amines than thetraditional controls that have undergone the classical malolactic fermentation.

Influence of sequential fermentations with Torulaspora delbrueckii and Saccharomyces cerevisiae on wine quality

Torulaspora delbrueckii is a non-Saccharomyces yeast with interesting metabolic and physiological properties of potential use in oenology. This work examines the fermentative behaviour of five strains of T. delbrueckii in sequential fermentations with Saccharomyces cerevisiae, analysing the formation of aromatic compounds, polyalcohols and pigments. The fermentative power of these five strains ranged between 7.6 and 9.0% v/v ethanol; the associated volatile acidity was 0.2e0.7 g/l acetic acid. The production of glycerol was inferior to that of S. cerevisiae alone. The mean 2,3-butanediol concentration reached in single-culture S. cerevisiae fermentations was 73% higher than in the five sequential T. delbrueckii/S. cerevisiae fermentations. However, these fermentations produced larger quantities of diacetyl, ethyl lactate and 2-phenylethyl acetate than single-culture S. cerevisiae fermentation. 3-ethoxy propanol was produced only in the sequential fermentations. The five sequential fermentations produced smaller quantities of vitisin A and B than single-culture S. cerevisiae fermentation. In tests performed prior to the addition of the S. cerevisiae in the sequential fermentations, none of the T. delbrueckii strains showed any extracellular hydroxycinnamate decarboxylase activity. They therefore produced no vinyl phenolic pyranoanthocyanins.