Photoacoustic effect measurement in aqueous suspensions of gold nanorods caused by low-frequency and low-power near-infrared pulsing laser irradiation

When aqueous suspensions of gold nanorods are irradiated with a pulsing laser (808 nm), pressure waves appear even at low frequencies (pulse repetition rate of 25 kHz). We found that the pressure wave amplitude depends on the dynamics of the phenomenon. For fixed concentration and average laser current intensity, the amplitude of the pressure waves shows a trend of increasing with the pulse slope and the pulse maximum amplitude.We postulate that the detected ultrasonic pressure waves are a sort of shock waves that would be generated at the beginning of each pulse, because the pressure wave amplitude would be the result of the positive interference of all the individual shock waves.

A Wireless Charging System Applying Phase-Shift and Amplitude Control to Maximize Efficiency and Extractable Power

Wireless power transfer (WPT) is an emerging technology with an increasing number of potential applications to transfer power from a transmitter to a mobile receiver over a relatively large air gap. However, its widespread application is hampered due to the relatively low efficiency of current Wireless power transfer (WPT) systems. This study presents a concept to maximize the efficiency as well as to increase the amount of extractable power of a WPT system operating in nonresonant operation. The proposed method is based on actively modifying the equivalent secondary-side load impedance by controlling the phase-shift of the active rectifier and its output voltage level. The presented hardware prototype represents a complete wireless charging system, including a dc-dc converter which is used to charge a battery at the output of the system. Experimental results are shown for the proposed concept in comparison to a conventional synchronous rectification approach. The presented optimization method clearly outperforms state-of-the-art solutions in terms of efficiency and extractable power.

Andrea Branzi y la “Città senza architettura”: De la No-Stop City a los modelos de urbanización débil

El tema de estudio de esta tesis son las propuestas urbanas que Andrea Branzi ha desarrollado durante los últimos cincuenta años, centrándose especialmente en aquellas más elaboradas y completas: la No-Stop City (1970-71), que elabora como miembro del grupo radical Archizoom, y dos de sus modelos de urbanización débil, Agronica (1995) y el Master Plan para el Strijp Philips de Eindhoven (2000). Se trata de una parte de su obra que ha mantenido constante, a lo largo del tiempo, una propuesta de disolución de la arquitectura de notable consistencia que puede describirse con la fórmula “città senza architettura”, acuñada por él mismo. Una voluntad que ya se apunta en la muy variada producción de Archizoom previa a la No-Stop City, y que cristaliza y se hace explícita en este proyecto que aspiraba a: “liberar al hombre de la arquitectura”. A pesar de la continuidad de esta idea en el tiempo, la ciudad sin arquitectura de Branzi ha evolucionado claramente dando lugar a distintos tipos de disolución. Una disolución que, obviamente, no supone la efectiva desaparición de la disciplina, sino la formulación de una arquitectura “otra” basada en un replanteamiento radical de la naturaleza y el papel de la misma. Esta agenda contra la disciplina se ha desplegado a través de una serie de temas que socavan el objeto arquitectónico canónico (su vaciamiento expresivo, la pérdida de importancia de la envolvente y la forma acabada, el carácter anticompositivo, la independencia entre forma y función, la mutabilidad en el tiempo…), pero va más allá al poner en crisis el rol que la propia arquitectura ha tenido en la configuración material, política y simbólica del hábitat humano. Una pérdida de protagonismo y centralidad en la sociedad contemporánea que, en el discurso del arquitecto, implica necesariamente un papel subordinado. De este proceso de disolución surge un nuevo tipo de ciudad en la que la forma urbana o se ha perdido o se ha convertido en superflua, en la que se ha disuelto la zonificación funcional, cuyos espacios interiores se hallan en un proceso de permanente reprogramación que ignora las tipologías, que trasciende la división entre lo urbano y lo agrícola y que es, ante todo, un espacio de flujos y servicios. La crisis de la ciudad tradicional implica, en definitiva, un cambio en la naturaleza misma de lo urbano que pasa de considerarse un lugar físico y construido, a convertirse en una condición inmaterial y virtualmente omnipresente que se despliega independientemente de su soporte físico. En las investigaciones urbanas de Branzi convergen, además, muchas de las reflexiones que el arquitecto ha desarrollado sobre, y desde, las distintas “escalas” de la actividad profesional: diseño, arquitectura y urbanismo. Estas propuestas no sólo cuestionan las relaciones establecidas entre objetos, edificios, ciudades y territorios sino que ponen en cuestión estas mismas categorías. Unas ciudades sin arquitectura que se basan, en última instancia, en plantear preguntas que son muy sencillas y, por otra parte, eternas: ¿Qué es un edificio? ¿Qué es una ciudad? ABSTRACT The subject of study of this thesis are the urban proposals developed by Andrea Branzi over the last fifty years, with a special focus on the more developed and comprehensive ones: the No- Stop City (1970-1971), produced as a member of the architettura radicale group Archizoom, and two of his “weak urbanization models”: Agronica (1995) and the Master Plan for Philips Strijp in Eindhoven (2000). This area of his work has kept, over time, a remarkably consistent proposal for the dissolution of architecture that can be described with the motto città senza architettura (city without architecture), coined by himself. A determination, already latent in the very diverse production of Archizoom prior to No-Stop City, that crystallizes and becomes explicit in this project which was aimed to "liberate man from the architecture." Despite the continuity of this idea over time, Branzi’s city without architecture has clearly evolved leading to different types of dissolution. A dissolution that, obviously, does not mean the effective demise of the discipline, but rather, the formulation of an architecture autre based on a radical rethinking of its nature and role. This agenda against the discipline has been developed through a number of issues that undermine the canonical architectural object (its expressive emptying, the loss of importance of the envelope and the finished shape, the anticompositional character, the independence between form and function, the mutability over time...), but goes beyond it by putting into crisis the role that architecture itself has had in the material, political and symbolic configuration of the human habitat. A loss of prominence and centrality in contemporary society that, in the architect’s discourse, implies a subordinate role. From this dissolution process, a new type of city arises: a city where urban form has been lost or has become superfluous, in which functional zoning has dissolved, whose interiors are in a permanent process of reprogramming that ignores typologies, that transcends the division between urban and agricultural and becomes, above all, a space of flows and services. Ultimately, the crisis of the traditional city implies a change in the very nature of the urban that moves from being regarded as a physical and built place, to become an immaterial and virtually omnipresent condition that unfolds regardless of its physical medium. Many of the ideas Branzi has developed on, and from, the different "scales" of professional activity (design, architecture and urbanism) converge in his urban research. These proposals not only question the relations between objects, buildings, cities and territories but also these very categories. Cities without architecture that are based, ultimately, on raising simple questions that are, on the other hand, eternal: What is a building? What is a city?

Influence of local wind speed and direction on wind power dynamics - Application to offshore very short-term forecasting

Wind power time series usually show complex dynamics mainly due to non-linearities related to the wind physics and the power transformation process in wind farms. This article provides an approach to the incorporation of observed local variables (wind speed and direction) to model some of these effects by means of statistical models. To this end, a benchmarking between two different families of varying-coefficient models (regime-switching and conditional parametric models) is carried out. The case of the offshore wind farm of Horns Rev in Denmark has been considered. The analysis is focused on one-step ahead forecasting and a time series resolution of 10 min. It has been found that the local wind direction contributes to model some features of the prevailing winds, such as the impact of the wind direction on the wind variability, whereas the non-linearities related to the power transformation process can be introduced by considering the local wind speed. In both cases, conditional parametric models showed a better performance than the one achieved by the regime-switching strategy. The results attained reinforce the idea that each explanatory variable allows the modelling of different underlying effects in the dynamics of wind power time series.

Insignificance and Minor Architecture

The fragmented condition of our everyday brings us closer to the risks of hyper-expression. Against it two positions unfold to help us face a world that escapes our capacities: familiarity and poetic recognition. In the latter it is crucial the role of the insignificant as dynamic and relational instigator of a conscious threading of reality through the actions of the Poeta Faber and his careful look onto the world. / The production of the common as the material and symbolic fabric of the city, unstable reality in a perpetual becoming, leads us to a new and much needed reconsideration of the public/private division born from the modern state. Immersed in the confusion between public and common, we have not perceived that through the expropriation of the first we have been prepared for the willing surrendering of the second. / From insignificance to rebellion as affirmative going into action related to the idea of minor architecture as common and intensely political production, born from the inside of a society that has no more outsides.

Life cycle assessment of concentrated solar power (CSP) and the influence of hybridising with natural gas

Purpose Concentrating Solar Power (CSP) plants based on parabolic troughs utilize auxiliary fuels (usually natural gas) to facilitate start-up operations, avoid freezing of HTF and increase power output. This practice has a significant effect on the environmental performance of the technology. The aim of this paper is to quantify the sustainability of CSP and to analyse how this is affected by hybridisation with different natural gas (NG) inputs. Methods A complete Life Cycle (LC) inventory was gathered for a commercial wet-cooled 50 MWe CSP plant based on parabolic troughs. A sensitivity analysis was conducted to evaluate the environmental performance of the plant operating with different NG inputs (between 0 and 35% of gross electricity generation). ReCiPe Europe (H) was used as LCA methodology. CML 2 baseline 2000 World and ReCiPe Europe E were used for comparative purposes. Cumulative Energy Demands (CED) and Energy Payback Times (EPT) were also determined for each scenario. Results and discussion Operation of CSP using solar energy only produced the following environmental profile: climate change 26.6 kg CO2 eq/KWh, human toxicity 13.1 kg 1,4-DB eq/KWh, marine ecotoxicity 276 g 1,4-DB eq/KWh, natural land transformation 0.005 m2/KWh, eutrophication 10.1 g P eq/KWh, acidification 166 g SO2 eq/KWh. Most of these impacts are associated with extraction of raw materials and manufacturing of plant components. The utilization NG transformed the environmental profile of the technology, placing increasing weight on impacts related to its operation and maintenance. Significantly higher impacts were observed on categories like climate change (311 kg CO2 eq/MWh when using 35 % NG), natural land transformation, terrestrial acidification and fossil depletion. Despite its fossil nature, the use of NG had a beneficial effect on other impact categories (human and marine toxicity, freshwater eutrophication and natural land transformation) due to the higher electricity output achieved. The overall environmental performance of CSP significantly deteriorated with the use of NG (single score 3.52 pt in solar only operation compared to 36.1 pt when using 35 % NG). Other sustainability parameters like EPT and CED also increased substantially as a result of higher NG inputs. Quasilinear second-degree polynomial relationships were calculated between various environmental performance parameters and NG contributions. Conclusions Energy input from auxiliary NG determines the environmental profile of the CSP plant. Aggregated analysis shows a deleterious effect on the overall environmental performance of the technology as a result of NG utilization. This is due primarily to higher impacts on environmental categories like climate change, natural land transformation, fossil fuel depletion and terrestrial acidification. NG may be used in a more sustainable and cost-effective manner in combined cycle power plants, which achieve higher energy conversion efficiencies.

Symbolic vs substantive sustainability reporting: examining the role of company-level characteristics

As sustainability reporting (SR) practices have being increasingly adopted by corporations over the last twenty years, most of the existing literature on SR has stressed the role of external determinants (such as institutional and stakeholder pressures) in explaining this uptake. However, given that recent evidence points to a broader range of motives and uses (both external and internal) of SR, we contend that its role within company-level activities deserves greater academic attention. In order to address this research gap, this paper seeks to provide a more integrated perspective of both institutional and efficiency explanations of SR dynamics, as well as to highlight the role of company-level characteristics in explaining its contribution to sustainability management practices. More specifically, we suggest that substantive SR implementation can be predicted by assessing the level of fit between the organization and the SR framework being adopted. Building on this idea, our theoretical model defines three forms of fit (technical, cultural and political) and identifies organizational characteristics associated to each of these fits. Finally, implications for academic research, businesses and policy-makers are derived.