Ingeniería de la conservación: Investigación aplicada para la conservación de la fauna mediterránea amenazada

El ser humano nunca ha tenido una capacidad semejante a la actual para alterar el medio en el que vive. A través fundamentalmente de cambios en el uso del hábitat, alteración de los ciclos biogeoquímicos, cambio climático y presencia de especies invasoras, la tasa de extinción de especies se ha acelerado enormemente. Al crecer más rápido la población humana dentro de las áreas en las que se concentra una mayor biodiversidad (biodiversity hotspots), las tasas de transformación son mayores, por lo que dicha biodiversidad se encuentra más amenazada. Entre los principales 25 biodiversity hotspots globales se encuentra la cuenca mediterránea. Las afecciones a la biodiversidad hacen por tanto que en dicha cuenca mediterránea sea necesario poner en práctica iniciativas innovadoras para su conservación. Pero además de una cuidadosa selección, es necesario el seguimiento y la evaluación de la eficacia y la eficienca de dichas medidas, para comprobar su idoneidad y mejorarlas cuando sea posible. Esta es la tarea de la ingeniería de la conservación. Esta Memoria busca analizar y proponer mejoras en cuatro acciones experimentales de conservación de la biodiversidad que tienen un marco común, la conservación de especies subrogadas del monte mediterráneo. En concreto de cinco especies amenazadas: conejo de monte (Oryctolagus cuniculus, especie llave), águila imperial ibérica (Aquila adalberti), águila perdicera (Aquila fasciata), cigüeña negra (Ciconia nigra) y lince ibérico (Lynx pardinus), todas ellas especies paraguas y bandera. Casi todas estas especies se enfrentan a amenazas comunes, como son la pérdida de la calidad del hábitat, la mortalidad de origen humano, la escasez de alimento o la falta de eficiencia en las técnicas de seguimiento. Las acciones destinadas a revertir o minimizar estas amenazas han tenido un marco geográfico y ecológico común, 49 fincas privadas de monte mediterráneo situadas en 9 espacios de la Red Natura 2000 del centro-occidental peninsular, en las que se ha podido trabajar merced a acuerdos de custodia del territorio. Dichas actividades han sido financiadas casi por completo con cargo a fondos LIFE Naturaleza de la Comisión Europea. El presente documento contribuye a aportar el conocimiento científico imprescindible para mejorar la eficacia y eficiencia de las medidas técnicas de gestión y conservación: la ingeniería de la conservación. Como resultados más relevantes se pueden citar que la selección del conejo de las zonas sembradas aumenta con la presencia tanto de isletas de matorral como de refugios y resulta inferior en las zonas de matorral más cerrado; que la electrocución es una de las principales causas de mortalidad de las rapaces amenazadas, así como que se ha detectado que la mortalidad se concentra en determinadas zonas que deben ser prioritarias para su corrección y que éstas deben pasar por las modificaciones estructurales; que la selección de zonas de alimentación por parte de la cigüeña negra se ve afectada por numerosos factores y que una adecuada ubicación y gestión de las charcas para ganadería y caza mayor puede favorecer no sólo la alimentación de esta especie, sino suponer un lugar de cría para diversas especies de anfibios y peces autóctonos, en franco declive; finalmente, hay que destacar que la mejora en el seguimiento de las poblaciones de lince ibérico pasa por la incorporación de métodos de seguimiento novedosos, como las cámaras infrarrojas en letrinas, dada la capacidad de aprendizaje de la especie. Abstract Nowadays the human being has reached its top ability to exchange its environment. Mainly through habitat change, altering biogeochemical cycles, climatic change and alien species, global extinction rate has increased dramatically. Population increases faster in biodiversity hotspots, thus change rates are higher. Mediterranean basin is included within the 25 most valuable biodiversity hotspots. Affections on biodiversity turns necessary to develop innovative actions to maintain the most threatened species in this hotspot. But further than a careful selection and implementarion, survey and evaluation of those practices is necessary to check its suitability. Those are actions for the conservation engineering. This Memory looks for to analyze and to put forward improvements in four experimental biodiversity conservation actions with a common framework: conservation of surrogate Mediterranean species. Those actions were specifically directed to five threatened species: the European wild rabbit (Oryctolagus cuniculus, key species), Spanish imperial eagle (Aquila adalberti) and Bonelli’s eagle (Aquila fasciata, both of the umbrella and flagship species), black stork (Ciconia nigra, umbrella and flagship species) and the Iberian lynx (Lynx pardinus, umbrella and flagship species). Those species have common threats: habitat loss, maninduced mortality, food shortening and lack of surveying efficiency. Actions aimed to minimize those threats also had a common geographical frame: 49 privately owned states within 9 Natura 2000 areas in Southwestern Spain. Actions were developed through lands tewardship agreements, and were even wholly undertaken through European Commision LIFE’s fund. This document contributes to develop cientific knowledge necessary for increasing efficacy and efficiency for implementing technical measures devoted to conservation, the conservation engineering. One of the most outstanding result might be the necessity of including bushy islets or rabbit shelter within sowings when enhacing rabbit populations is the goal. Electrocution is one of the commonest man-induced death causes for raptors, especially for the threatened ones. Areas of concentration of this mortality have been detected, and when mitigation measures have been evaluated, only structural modifications had results. The black stork’s selection of feeding areas is influenced by several factors. An adequate location and management of livestock’s ponds can favour not only this species, but also creating new breeding places for amphibians and indigenous fish species, most of them in a sharp decline. Finally, improving the survey of the Iberian lynx might be achieved through implementing newly developed surveying systems, such as the infrared cameras in latrines.

Farm nitrogen balances in six European landscapes as an indicator for nitrogen losses and basis for improved management.

Improved management of nitrogen (N) in agriculture is necessary to achieve a sustainable balance between the production of food and other biomass, and the unwanted effects of N on water pollution, greenhouse gas emissions, biodiversity deterioration and human health. To analyse farm N-losses and the complex interactions within farming systems, efficient methods for identifying emissions hotspots and evaluating mitigation measures are therefore needed. The present paper aims to fill this gap at the farm and landscape scales. Six agricultural landscapes in Poland (PL), the Netherlands (NL), France (FR), Italy (IT), Scotland (UK) and Denmark (DK) were studied, and a common method was developed for undertaking farm inventories and the derivation of farm N balances, N surpluses and for evaluating uncertainty for the 222 farms and 11 440 ha of farmland included in the study. In all landscapes, a large variation in the farm N surplus was found, and thereby a large potential for reductions. The highest average N surpluses were found in the most livestock-intensive landscapes of IT, FR, and NL; on average 202 ± 28, 179 ± 63 and 178 ± 20 kg N ha−1 yr−1, respectively. All landscapes showed hotspots, especially from livestock farms, including a special UK case with large-scale landless poultry farming. Overall, the average N surplus from the land-based UK farms dominated by extensive sheep and cattle grazing was only 31 ± 10 kg N ha−1 yr−1, but was similar to the N surplus of PL and DK (122 ± 20 and 146 ± 55 kg N ha−1 yr−1, respectively) when landless poultry farming was included. We found farm N balances to be a useful indicator for N losses and the potential for improving N management. Significant correlations to N surplus were found, both with ammonia air concentrations and nitrate concentrations in soils and groundwater, measured during the period of N management data collection in the landscapes from 2007–2009. This indicates that farm N surpluses may be used as an independent dataset for validation of measured and modelled N emissions in agricultural landscapes. No significant correlation was found with N measured in surface waters, probably because of spatial and temporal variations in groundwater buffering and biogeochemical reactions affecting N flows from farm to surface waters. A case study of the development in N surplus from the landscape in DK from 1998–2008 showed a 22% reduction related to measures targeted at N emissions from livestock farms. Based on the large differences in N surplus between average N management farms and the most modern and N-efficient farms, it was concluded that additional N-surplus reductions of 25–50%, as compared to the present level, were realistic in all landscapes. The implemented N-surplus method was thus effective for comparing and synthesizing results on farm N emissions and the potentials of mitigation options. It is recommended for use in combination with other methods for the assessment of landscape N emissions and farm N efficiency, including more detailed N source and N sink hotspot mapping, measurements and modelling.

Localization and Tracking in Energy-Constrained Networks with Dynamic Connectivity

Systems used for target localization, such as goods, individuals, or animals, commonly rely on operational means to meet the final application demands. However, what would happen if some means were powered up randomly by harvesting systems? And what if those devices not randomly powered had their duty cycles restricted? Under what conditions would such an operation be tolerable in localization services? What if the references provided by nodes in a tracking problem were distorted? Moreover, there is an underlying topic common to the previous questions regarding the transfer of conceptual models to reality in field tests: what challenges are faced upon deploying a localization network that integrates energy harvesting modules? The application scenario of the system studied is a traditional herding environment of semi domesticated reindeer (Rangifer tarandus tarandus) in northern Scandinavia. In these conditions, information on approximate locations of reindeer is as important as environmental preservation. Herders also need cost-effective devices capable of operating unattended in, sometimes, extreme weather conditions. The analyses developed are worthy not only for the specific application environment presented, but also because they may serve as an approach to performance of navigation systems in absence of reasonably accurate references like the ones of the Global Positioning System (GPS). A number of energy-harvesting solutions, like thermal and radio-frequency harvesting, do not commonly provide power beyond one milliwatt. When they do, battery buffers may be needed (as it happens with solar energy) which may raise costs and make systems more dependent on environmental temperatures. In general, given our problem, a harvesting system is needed that be capable of providing energy bursts of, at least, some milliwatts. Many works on localization problems assume that devices have certain capabilities to determine unknown locations based on range-based techniques or fingerprinting which cannot be assumed in the approach considered herein. The system presented is akin to range-free techniques, but goes to the extent of considering very low node densities: most range-free techniques are, therefore, not applicable. Animal localization, in particular, uses to be supported by accurate devices such as GPS collars which deplete batteries in, maximum, a few days. Such short-life solutions are not particularly desirable in the framework considered. In tracking, the challenge may times addressed aims at attaining high precision levels from complex reliable hardware and thorough processing techniques. One of the challenges in this Thesis is the use of equipment with just part of its facilities in permanent operation, which may yield high input noise levels in the form of distorted reference points. The solution presented integrates a kinetic harvesting module in some nodes which are expected to be a majority in the network. These modules are capable of providing power bursts of some milliwatts which suffice to meet node energy demands. The usage of harvesting modules in the aforementioned conditions makes the system less dependent on environmental temperatures as no batteries are used in nodes with harvesters--it may be also an advantage in economic terms. There is a second kind of nodes. They are battery powered (without kinetic energy harvesters), and are, therefore, dependent on temperature and battery replacements. In addition, their operation is constrained by duty cycles in order to extend node lifetime and, consequently, their autonomy. There is, in turn, a third type of nodes (hotspots) which can be static or mobile. They are also battery-powered, and are used to retrieve information from the network so that it is presented to users. The system operational chain starts at the kinetic-powered nodes broadcasting their own identifier. If an identifier is received at a battery-powered node, the latter stores it for its records. Later, as the recording node meets a hotspot, its full record of detections is transferred to the hotspot. Every detection registry comprises, at least, a node identifier and the position read from its GPS module by the battery-operated node previously to detection. The characteristics of the system presented make the aforementioned operation own certain particularities which are also studied. First, identifier transmissions are random as they depend on movements at kinetic modules--reindeer movements in our application. Not every movement suffices since it must overcome a certain energy threshold. Second, identifier transmissions may not be heard unless there is a battery-powered node in the surroundings. Third, battery-powered nodes do not poll continuously their GPS module, hence localization errors rise even more. Let's recall at this point that such behavior is tight to the aforementioned power saving policies to extend node lifetime. Last, some time is elapsed between the instant an identifier random transmission is detected and the moment the user is aware of such a detection: it takes some time to find a hotspot. Tracking is posed as a problem of a single kinetically-powered target and a population of battery-operated nodes with higher densities than before in localization. Since the latter provide their approximate positions as reference locations, the study is again focused on assessing the impact of such distorted references on performance. Unlike in localization, distance-estimation capabilities based on signal parameters are assumed in this problem. Three variants of the Kalman filter family are applied in this context: the regular Kalman filter, the alpha-beta filter, and the unscented Kalman filter. The study enclosed hereafter comprises both field tests and simulations. Field tests were used mainly to assess the challenges related to power supply and operation in extreme conditions as well as to model nodes and some aspects of their operation in the application scenario. These models are the basics of the simulations developed later. The overall system performance is analyzed according to three metrics: number of detections per kinetic node, accuracy, and latency. The links between these metrics and the operational conditions are also discussed and characterized statistically. Subsequently, such statistical characterization is used to forecast performance figures given specific operational parameters. In tracking, also studied via simulations, nonlinear relationships are found between accuracy and duty cycles and cluster sizes of battery-operated nodes. The solution presented may be more complex in terms of network structure than existing solutions based on GPS collars. However, its main gain lies on taking advantage of users' error tolerance to reduce costs and become more environmentally friendly by diminishing the potential amount of batteries that can be lost. Whether it is applicable or not depends ultimately on the conditions and requirements imposed by users' needs and operational environments, which is, as it has been explained, one of the topics of this Thesis.

Perspectives on climate change and human development in the Mediterranean agriculture

The Mediterranean region is one of the world's climate change hotspots. Future climate projections envisage dramatic implications for the agricultural and water sectors that will endanger economic development and lead to natural resources degradation and social instability.

The Spanish water ?pressure cooker?: Threading the interplay between resource resilient water governance outcomes by strengthening the robustness of water governance processes.

This paper uses the metaphor of a pressure cooker to highlight how water problems in Spain are highly geographical and sectorial in nature, with some specific hotspots which raise the temperature of the whole water complex system, turning many potentially solvable water problems into ?wicked problems?. The paper discusses the tendency for water governance to be hydrocentric, when often the drivers and in turn the ?solutions? to Spanish water problems lie outside the water sphere. The paper analyzes of the current water governance system by looking at water governance as both a process, and its key attributes like participation, trans- parency, equity and rule of law, as well as an analysis of water governance as an outcome by looking at efficiency and sustainability of water use in Spain. It concludes on the need to have a deeper knowledge on the interactions of water governance as a process and as an outcome and potential synergies and arguing that water governance is an inherently political process which calls for strengthening the capacity of the system by looking at the interactions of these different governance attributes.

Desarrollo e implementación de un sistema robótico aéreo con programación tridimensional orientado al recorrido de rutas

En la actualidad se estudia en numerosos campos cómo automatizar distintas tareas ejecutadas por aeronaves con tripulación humana. Estas tareas son en todos los casos muy costosos, debido al gran consumo de combustible, gran coste de adquisición y mantenimiento de la propia aeronave, todo ello sin contar el riesgo para los mismos tripulantes. Como ejemplo de estas tareas se puede incluir la vigilancia policial y fronteriza, revisiones de tendidos de alta tensión, la alerta temprana de incendios forestales y la medición de parámetros contaminantes. El objetivo de este proyecto es el diseño y la construcción de un prototipo electrónico empotrado basado en microcontrolador con núcleo C8051 de Silicon labs, que sea capaz de gobernar una aeronave de radiocontrol de forma transparente, de manera que en un futuro se pueda sustituir el propio aeromodelo, con la modificación de algunos parámetros, para poder incorporar sistemas de video o distintos medios de detección de variables. El prototipo seguirá una ruta confeccionada y transferida como un archivo de texto con un formato determinado que contendrá los datos necesarios para poder navegar mediante GPS. El trabajo con los modelos de motorización térmica (motores de combustión interna tipo glow, en este caso) resulta peligroso debido a la gran energía que son capaces de alcanzar. A fin de mantener la máxima seguridad durante la evolución del proyecto, se ha diseñado un proceso de tres partes independientes que permitan la correcta familiarización de los distintos componentes que se emplearán. Las fases son las siguientes: 1. Test y modelado de todos los componentes mediante pequeños montajes con protoboard de inserción y programas individuales. Se realizará mediante una tarjeta multipropósito que contendrá un microcontrolador similar en características, aunque de menor complejidad, al del prototipo final. 2. Integración de todos los componentes mediante una tarjeta especialmente diseñada que servirá de interfaz entre la tarjeta multipropósito y todo el hardware necesario para el control de un vehículo terrestre de iguales características (actuadores y motorización) al aeromodelo. 3. Diseño de un sistema embebido que concentre todos los subsistemas desarrollados en las fases anteriores y que integre todos los componentes necesarios para el gobierno de una aeronave de ala fija. ABSTRACT. Nowadays, the way of automating different tasks done by manned vehicles is studied. These tasks are any case very expensive, due to large fuel consumption, costs of aircraft buying, without taking into account the risk for human crew. As an example of these tasks, we can include policing or border surveillance, maintenance of high voltage lines, early warning of forest fire and measuring of pollution parameters. The target of this project is the design and construction of an embedded electronic prototype, based on a microcontroller with C8051 core from Silicon labs, and it will be able to controlling an aircraft transparently, in order that in the future the flying model could be changed with the modification of some parameters, and video or any variables detection systems could be added. The prototype will follow a designed and transferred path as an plain text file with a given format, that will contain all the necessary data for GPS navigation. Working with heat engine models (internal combustion engine, glow type, in this case) becomes dangerous due to the large energy that can be able to acquire. In order to keep the maximum safety level during the project evolution a three independent stages process have been designed, this allows familiarizing properly with the parts that will be used. The stages are as follows: 1. Test and modeling of all of the parts by little assemblies with through-hole protoboard and stand alone programs. It will be done with a multipurpose card which contains a microcontroller of similar characteristics, although less complex, of the final prototype. 2. Integrating of all of parts through a dedicated design card that will serve as interface between multipurpose card and all the necessary hardware for controlling a ground vehicle with the same characteristics (actuators and engine) of the flying model. 3. Embedded system designing that contains all the developed subsystems in the previous stages and integrates all the necessary parts for controlling a fixed-wing aircraft.

Ecología de la dispersión de plantas en los bosques secos del suroccidente Ecuatoriano

La importancia del proceso de dispersión de semillas en la estructura y dinámica de los ecosistemas es ampliamente reconocida. Sin embargo, para los bosques tropicales estacionalmente secos los estudios relacionados con este proceso son aún escasos y dispersos en comparación con los bosques tropicales lluviosos. En este trabajo se estudió la importancia de los síndromes de dispersión de semillas en la estructuración de comunidades, mediante el análisis de los patrones de dispersión de semillas en el espacio y tiempo para comunidades de leñosas en los bosques secos del suroccidente Ecuatoriano. Esta área forma parte de la región Tumbesina, una de las áreas de endemismo más importantes del mundo, pero también uno de los hotspots más amenazados. El clima se caracteriza por una estación seca que va de mayo a noviembre y una estación lluviosa que se extiende desde diciembre a abril. Para toda esta zona se estima una temperatura promedio anual entre 20° y 26°C y una precipitación promedio anual entre 300 y 700 mm. El trabajo de campo se desarrolló entre febrero de 2009 y septiembre de 2012. El primer paso fue la recopilación de información sobre las especies leñosas nativas de los bosques secos del suroccidente de Ecuador, que permitiera asignar a cada especie a un síndrome de dispersión para determinar el espectro de síndromes de dispersión de semillas. Luego, utilizando la información disponible de 109 parcelas establecidas previamente a lo largo de cuatro cantones de la provincia de Loja que conservan bosques secos en buen estado, se analizó la relación entre el síndrome de dispersión y condiciones ambientales. La relación de los síndromes de dispersión con los patrones espaciales de las especies y con los patrones de la lluvia y banco de semillas se estudió dentro de una parcela permanente de 9 ha, en la Reserva Ecológica Arenillas. Dentro de esta parcela se estableció un transecto de aproximadamente 3,4 km, que se recorrió mensualmente para colectar excretas de cérvidos y analizar el rol de este grupo como dispersor de semillas. Una gran variedad de plantas en los bosques secos tropicales del suroccidente de Ecuador requirió la asistencia de animales para la dispersión de semillas. Sin embargo, un análisis del espectro de dispersión considerando no solo la riqueza, sino también la abundancia relativa de especies, permitió determinar que a pesar de la alta variedad de especies zoócoras, la mayor parte de la comunidad correspondía a individuos anemócoros, que no proveen ninguna recompensa para la dispersión por animales. Este patrón puede deberse a la abundancia relativa de hábitats adecuados para especies con diferente síndrome de dispersión. Las condiciones ambientales afectaron la estructura del espectro de dispersión en la comunidad de bosque seco neotropical estudiada. El análisis de la importancia relativa del síndrome de dispersión y de la heterogeneidad espacial en la formación de patrones espaciales de árboles adultos permitió determinar que la heterogeneidad ambiental ejercía un efecto adicional (y en algunos el único) en la formación de patrones agregados de la mayoría de especies estudiadas. Los resultados señalaron diferencias en los patrones espaciales de las especies dependiendo del síndrome de dispersión, pero también una gran variación en los patrones espaciales incluso entre especies del mismo síndrome de dispersión. El análisis simultáneo de los patrones de la lluvia de semillas y banco de semillas de una comunidad de leñosas y su relación con la vegetación establecida indicaron que la lluvia de semillas era temporalmente variable en número de especies y abundancia de semillas, y dependía del síndrome de dispersión. El síndrome de dispersión también influyó en la formación de bancos de semillas, siendo las especies con capacidad de dispersión limitada (autócoras) las de mayor riqueza de especies y abundancia de semillas. Los cérvidos también se consideraron como un elemento clave en el proceso de dispersión de semillas. Al menos ocho especies leñosas fueron dispersadas legítimamente vía endozoócora. La mayoría de las especies dispersadas presentaron diásporas sin adaptaciones obvias para la dispersión, por lo que la ingestión de semillas por cérvidos se constituye en una vía potencial para la dispersión de sus semillas a largas distancias y, con ello, mejora la posibilidad de colonizar nuevos sitios y mantener el flujo genético. Los resultados de este estudio aportan nuevas evidencias para el entendimiento de la importancia de los procesos de dispersión de semillas en la estructura de los bosques secos neotropicales. Uno de los principales hallazgos a partir de estos cuatro capítulos es que los patrones espaciales de las especies, así como las estrategias que utilizan para dispersarse y hacer frente a las condiciones adversas (es decir, lluvia o banco de semillas) llevan consigo un efecto del síndrome de dispersión, y que la intensidad ese efecto depende a la vez de las condiciones ambientales del lugar. ABSTRACT The importance of seed dispersal process in the estructuring and ecosystem dynamic is widely recongnized. However, for seasonally tropical dry forest studies related to this process are still scarce and scattered compared to tropical rain forests. The present research deals with the importance of seed dispersal syndromes as a driver in the community structure, focusing its attention to temporal and spatial patterns of seed dispersal in woody communities of seasonally dry forest at Southwestern Ecuador. This area is part of the Tumbesian region, one of the most important areas of endemism, but also one of the most threatened areas around the world. Climate is characterized by a dry season from May to November, and a rainy season from December to April. For the whole area an average temperature between 20 ° and 26 ° C, and an average annual rainfall between 300 and 700 mm are estimated. Fieldwork was carried out between February 2009 and September 2012. During a first step information about native woody species of dry forests of southwestern Ecuador was gathered, enabling to assign a dispersal syndrome to each species to determine the seed dispersal spectrum. In a second step, available information from 109 established plots along four municipalities in Loja province, which hold the highest and best conserved dry forest remanants, was analyzed to establish the relationship between dispersal syndromes and environmental conditions. The relationships between dispersal syndromes and species spatial patterns; and between dispersal syndromes and seed rain and seed bank patterns, were studied within a permanent plot of 9 ha, in the Arenillas Ecological Reserve. Within this plot one transect of approximately 3.4 km was set to collect monthly deer droppings, which were used to latter analyze the rol of this group as seed dispersers. The results showed that a large variety of plants in tropical dry forest of Southwestern Ecuador require animal assistance to dispers their seeds. However, an analysis of seed dispersal spectrum considering not only species richness, but also the relative abundance of species, allowed to determine that despite the high variety of zoochorous species, most individuals in the community corresponds to anemochoruos species. This shift may be due to the relative abundance of habitats that are suitable for species with different dispersal syndromes. Moreover, quantitative data analysis showed that environmental conditions affect the structure of seed dispersal spectrum in the studied community. The analysis of relative importance of dispersal syndrome, and the environmental heterogeneity on formation of adult trees spatial patterns, indicated that environmental heterogeneity exert an additional (or was the only) effect limiting the distribution of most species in this forest. The findings showed differences in spatial patterns related to dispersal syndrome, but also showed a large variation in spatial patterns even among species sharing the same dispersal syndrome. Simultaneous analysis of seed rain and seed bank patterns of a woody community, and their relationship with established vegetation, suggested that seed rain is temporally variable in species number and seeds abundance, and that variation is related to the dispersal syndrome. Dispersal syndrome also influenced on the formation of seed banks, being species with limited dispersal abilities (autochorous) the ones with highest species richness and seed abundance. Deer were found as a key element in the seed dispersal process. At least to eight woody species were dispersed legitimately by ingestion. Diaspores of most dispersed species had no obvious adaptations to seed dispersal, therefore, seed ingestion by deer represents a potential pathway for long-distance dispersal, and hence, improves the chances to colonizing new sites and to maintain gene flow. Overall, these results provide new evidence for understanding the importance of seed dispersal processes in the structure of Neotropical dry forests. One of the major findings from these four chapters is that spatial patterns of species, and the strategies used to disperse their seeds and to deal with the adverse conditions (i.e. seed rain or seed bank) are related with dispersal syndromes, and the intensity of that relation depends in turn, on environmental conditions.

Design and implementation of an adaptive dashboard and visualization interface for the dynamic optimization and control of Data Centers

Over the last few years, the Data Center market has increased exponentially and this tendency continues today. As a direct consequence of this trend, the industry is pushing the development and implementation of different new technologies that would improve the energy consumption efficiency of data centers. An adaptive dashboard would allow the user to monitor the most important parameters of a data center in real time. For that reason, monitoring companies work with IoT big data filtering tools and cloud computing systems to handle the amounts of data obtained from the sensors placed in a data center.Analyzing the market trends in this field we can affirm that the study of predictive algorithms has become an essential area for competitive IT companies. Complex algorithms are used to forecast risk situations based on historical data and warn the user in case of danger. Considering that several different users will interact with this dashboard from IT experts or maintenance staff to accounting managers, it is vital to personalize it automatically. Following that line of though, the dashboard should only show relevant metrics to the user in different formats like overlapped maps or representative graphs among others. These maps will show all the information needed in a visual and easy-to-evaluate way. To sum up, this dashboard will allow the user to visualize and control a wide range of variables. Monitoring essential factors such as average temperature, gradients or hotspots as well as energy and power consumption and savings by rack or building would allow the client to understand how his equipment is behaving, helping him to optimize the energy consumption and efficiency of the racks. It also would help him to prevent possible damages in the equipment with predictive high-tech algorithms.

Outward Rectification of Voltage-Gated K+ Channels Evolved at Least Twice in Life History

Voltage-gated potassium (K+) channels are present in all living systems. Despite high structural similarities in the transmembrane domains (TMD), this K+ channel type segregates into at least two main functional categories—hyperpolarization-activated, inward-rectifying (Kin) and depolarization-activated, outward-rectifying (Kout) channels. Voltage-gated K+ channels sense the membrane voltage via a voltage-sensing domain that is connected to the conduction pathway of the channel. It has been shown that the voltage-sensing mechanism is the same in Kin and Kout channels, but its performance results in opposite pore conformations. It is not known how the different coupling of voltage-sensor and pore is implemented. Here, we studied sequence and structural data of voltage-gated K+ channels from animals and plants with emphasis on the property of opposite rectification. We identified structural hotspots that alone allow already the distinction between Kin and Kout channels. Among them is a loop between TMD S5 and the pore that is very short in animal Kout, longer in plant and animal Kin and the longest in plant Kout channels. In combination with further structural and phylogenetic analyses this finding suggests that outward-rectification evolved twice and independently in the animal and plant kingdom.