The Ciborium or Lantern Tower of Valencia Cathedral: Geometry, Construction and Stability

Early 18th century treatise writer Tomas Vicente Tosca1 includes in his Tratado de la montea y cortes de Canteria [On Masonry Design and Stone Cutting], what is an important documentary source about the lantern of Valencia Cathedral. Tosca writes about this lantern as an example of vaulting over cross arches without the need of buttresses. A geometrical description is followed by an explanation of the structural behavior which manifests his deep understanding of the mechanics of masonry structures. He tries to demonstrate the absence of buttresses supporting his thesis on the appropriate distribution of loads which will reduce the "empujos" [horizontal thrusts] to the point of not requiring more than the thickness of the walls to stand (Tosca [1727] 1992, 227-230). The present article2 assesses T osca' s appreciation studying how loads and the thrusts they generate are transmitted through the different masonry elements that constitute this ciborium. In order to do so, we first present a geometrical analysis and make considerations regarding its materials and construction methods to, subsequently, analyze its stability adopting an equilibrium approach within the theoretical framework of the lower bound limit analysis.

The Ciborium or Lantern Tower of Valencia Cathedral: Geometry, Construction and Stability

Early 18th century treatise writer Tomas Vicente Tosca1 includes in his Tratado de la montea y cortes de Canteria [On Masonry Design and Stone Cutting], what is an important documentary source about the lantern of Valencia Cathedral. Tosca writes about this lantern as an example of vaulting over cross arches without the need of buttresses. A geometrical description is followed by an explanation of the structural behavior which manifests his deep understanding of the mechanics of masonry structures. He tries to demonstrate the absence of buttresses supporting his thesis on the appropriate distribution of loads which will reduce the "empujos" [horizontal thrusts] to the point of not requiring more than the thickness of the walls to stand (Tosca [1727] 1992, 227-230). The present article2 assesses T osca' s appreciation studying how loads and the thrusts they generate are transmitted through the different masonry elements that constitute this ciborium. In order to do so, we first present a geometrical analysis and make considerations regarding its materials and construction methods to, subsequently, analyze its stability adopting an equilibrium approach within the theoretical framework of the lower bound limit analysis.

Convective transport and stability in films of binary mixtures

Thin polymer films are increasingly used in advanced technological applications. The use of these films as coatings is often limited by their lack of stability due to their wettability properties on the substrates

Improvement of compatibility and stability on polyethylene-modified bitumen by use of an aromatic extra as compatibilizer.

Bitumen modification by polyethylene addition usually improves the mechanical properties of the binder and, therefore, the behavior in service of the bituminous mix: thermal susceptibility and rutting can be diminished, whilst the resistance to low temperature cracking may increase. To achieve this improvement it is necessary a good compatibility between the base bitumen and the polyethylene. Low compatibility between bitumen and polyethylene can lead to phase separation: the polymer- asphalt incompatibility translates into a deterioration of ultimate properties. The object of this research project was to determine if these problems can be diminished by using certain compatibilizer agents, e.g. an aromatic extract from the oil refinery. Compatibility and stability of the polyethylene modified bitumen were studied using conventional test methods and dynamic shear reometer (DSR). Blends of bitumen and polyethylene were prepared with neat bitumen (PMB) or bitumen with compatibilizer as component of the binder (PMBC) and then compared. The experimental results show that “colloid instability index”(IC) is a parameter that can be used to control the compatibility between bitumen and polyethylene. From polyethylene point of view, one of the parameters that govern is the “melt flow index” (MFI). Experimental results show that PMBC formulated with low IC bitumen and hi gh MFI lineal polyethylene can be considered as stable binder.

Stresses and stability of a mine paste fill

Se describe el comportamiento de los rellenos de pasta de las cámaras primarias de la mina de Aguas Teñidas y se calcula la resistencia que deben tener dichos rellenos para que no se desmoronen las paredes de los mismos que quedan expuestas al extraer las cámaras secundarias.Abstract:This article presents the study carried out at an underground mine to understand the stress distribution in the paste fills and to calculate the stability of the paste walls. The mine is operated using sublevel stopes. Three-dimensional numerical models designed with the FLAC 3D software are used to study the distribution of the vertical stresses in the paste. The numerical models have demonstrated that an arc-like effect is produced in the paste fills of the primary stopes. This effect relieves the vertical stresses and increases the stability of the exposed paste wall fill. Based on the results of the numerical models, in the 30m high secondary stopes, the arc effect starts to be evident only in paste walls with a width/height ratio lower than 0.8. 3-D calculations show that the use of Mitchell, R. J. et al. (1982) formula may be risky when estimating the fill stability in secondary stopes.

Flight dynamics and stability of kites in steady and unsteady wind conditions

The flight dynamics and stability of a kite with a single main line flying in steady and unsteady wind conditions are discussed. A simple dynamic model with five degrees of freedom is derived with the aid of Lagrangian formulation, which explicitly avoids any constraint force in the equations of motion. The longitudinal and lateral–directional modes and stability of the steady flight under constant wind conditions are analyzed by using both numerical and analytical methods. Taking advantage of the appearance of small dimensionless parameters in the model, useful analytical formulas for stable-designed kites are found. Under nonsteady wind-velocity conditions, the equilibrium state disappears and periodic orbits occur. The kite stability and an interesting resonance phenomenon are explored with the aid of a numerical method based on Floquet theory.

Study of the foundations, bearing soil and stability of the minaret-tower of Cordobas Mosque

This research in Cordoba's mosque tower main objective was to analyze and characterize the foundations and the underlying soil, calculating the stability of the monument as well as the settlement and deformations performed, using traditional calculation methods and also by finite elements, and to determine differences between both, as well as the stability factor of the Minaret Tower. The works done to study the soil, were drill bores and dynamic penetration tests, classification of samples by size, Atterberg limits, physical and chemical analysis, showing the typical geotechnical composition of the Guadalquivir valley: an alluvial material composed by sand, gravels and silt clays. To study the foundations, inclined bore samples were extracted with 10-65º, showing calcarenite stone ashlars and lime concrete alternating with stone and brick masonry.

Analytical study of the thermal behaviour and stability of a small satellite

In this work the thermal analysis of a small satellite orbiting around the Earth has been approached by direct integration of the heat balance equations of a two-node reduced model, obtaining a linearized second order ODE problem, similar in form to the classical case of the forced vibration of a damped system. As the thermal loads (solar radiation, albedo, etc.) are harmonic, the problem is solved by means of Fourier analysis methods. Research on that field can be directly applied to the analysis of thermal problems and the results obtained are satisfactory. Working on the frequency domain streamlines the analysis, simplifies the study and facilitates the experimental testing. The transfer functions are obtained for the two-node case but the study can be extended to an n-node model.

Sensing colour stability and mixtures of powder paprika using optical reflectance and image analysis.

The production and industry of paprika present several problems related to quality and to production costs. One of the main difficulties is to obtain an objective and quick method for predicting quality. Quality in powder paprika involves: quantity of carotenoids and the appearance and stability of colour. The method used currently for determining quality is the measurement of absorbance at 460 nm wavelength, of an acetone extract of carotenoids, but there is no information about the appearance of the paprika or the stability of its colour with time. " Another important problem is the presence of mixtures of powdered paprika produced in the Spanish region of "La Vera", which has a peculiar way of production, with a high '' quality and price, with other products of lower quality. It is necessary to obtain methods which are able to detect the fraud.

Resistance to malathion and lambda-cyhalothrin in Ceratitis capitata (Wiedemann) (Diptera: Tephritidae)

La mosca mediterránea de la fruta, Ceratitis capitata (Wiedemann, 1824) (Diptera: Tephritidae), es una de las plagas de mayor incidencia económica en cítricos y otros frutales a nivel mundial. En España las medidas de control de esta plaga en cítricos, desde mediados de los 90 hasta 2009, se basaron principalmente en el monitoreo de las poblaciones y en la aplicación de tratamientos aéreos y terrestres con malatión cebo. Sin embargo, desde la retirada en la Unión Europea en 2009 de los productos fitosanitarios que contienen malatión, los insecticidas más utilizados para el control de esta plaga han sido lambda-cihalotrina y spinosad. En 2004-2005 se detectaron poblaciones españolas de C. capitata resistentes a malatión. Esta resistencia se ha asociado a una mutación (G328A) en la acetilcolinesterasa (AChE), a una duplicación del gen de la AChE (Ccace2) (una de las copias lleva la mutación G328A) y a resistencia metabólica mediada por esterasas (posiblemente aliesterasas). Sin embargo, cuando se secuenció la aliesterasa CcE7 en individuos de una línea resistente a malatión, no se encontró ninguna de las mutaciones (G137D y/o W251L/S/G) asociadas a resistencia en otras especies, si bien se encontraron otras mutaciones al compararlos con individuos de una línea susceptible. Asimismo, mediante la selección en laboratorio de una línea resistente a malatión (W-4Km) con lambda-cihalotrina, se ha podido obtener una línea resistente a lambda-cihalotrina (W-1K). Finalmente, se ha demostrado la capacidad de esta especie para desarrollar resistencia a spinosad mediante selección en laboratorio. Los múltiples mecanismos de resistencia identificados evidencian el potencial de esta especie para desarrollar resistencia a insecticidas con diferentes modos de acción. Los objetivos de esta tesis doctoral son: 1) evaluar la susceptibilidad de poblaciones españolas de campo de C. capitata a lambda-cihalotrina y dilucidar los mecanismos de resistencia en la línea W-1Kλ; 2) comparar la herencia, el coste biológico y la estabilidad de la resistencia a malatión mediada por la mutación G328A y la duplicación del gen Ccace2 (una de las copias lleva la mutación G328A); y 3) investigar el papel de las mutaciones identificadas en la aliesterasa CcαE7 en la resistencia a malatión. Estos estudios son de utilidad para el desarrollo de estrategias de manejo de la resistencia que puedan prevenir o retrasar la aparición de resistencia y aumentar la sostenibilidad de los insecticidas disponibles para el control de esta plaga. Nuestros resultados indican que las poblaciones españolas de C. capitata analizadas han desarrollado resistencia a lambda-cihalotrina. Los valores de CL50 estimados para las poblaciones recogidas en la Comunidad Valenciana, Cataluña y Andalucía oscilaron entre 129 ppm y 287 ppm, igualando o sobrepasando la concentración recomendada para los tratamientos de campo (125 ppm). Estos resultados contrastan con los obtenidos con tres poblaciones de campo recogidas en Túnez, cuya susceptibilidad fue similar a la de la línea control (C). La línea resistente a lambda-cihalotrina W-1K se continuó seleccionando en el laboratorio alcanzándose unos niveles de resistencia de 205 veces con respecto a la línea C, siendo su CL50 (4224 ppm) más de 30 veces superior a la concentración recomendada para los tratamientos de campo. Esta línea resistente mostró altos niveles de resistencia cruzada a deltametrina (150 veces) y a etofenprox (240 veces), lo que sugiere que el desarrollo de resistencia a lambda-cihalotrina podría comprometer la eficacia de otros piretroides para el control de esta plaga. Hemos demostrado que la resistencia de la línea W-1K a lambda-cihalotrina fue casi completamente suprimida por el sinergista PBO, lo que indica que las enzimas P450 desempeñan un papel muy importante en la resistencia a este insecticida. Sin embargo, tanto las moscas de la línea susceptible C como las de la línea resistente W-1K perdieron inmediatamente la capacidad de caminar (efecto “knock-down”) al ser tratadas tópicamente con lambda-cihalotrina, lo que sugiere que la resistencia no está mediada por alteraciones en la molécula diana (resistencia tipo “kdr”). La resistencia metabólica mediada por P450 fue analizada comparando la expresión de 53 genes CYP (codifican enzimas P450) de las familias CYP4, CYP6, CYP9 y CYP12 en adultos de la línea resistente W-1K y de la línea susceptible C. Nuestros resultados muestran que el gen CYP6A51 (número de acceso GenBank XM_004534804) fue sobreexpresado (13-18 veces) en la línea W-1K. Por otra parte, la expresión del gen CYP6A51 fue inducida tanto en adultos de la línea W-1K como de la línea C al ser tratados con lambda-cihalotrina. Sin embargo, no se obtuvieron diferencias significativas entre la línea susceptible C y la línea resistente W-1K al comparar la cantidad de P450 y la actividad NADPH-citocromo c reductasa presente en fracciones microsomales obtenidas a partir de abdómenes. Asimismo, no hemos podido correlacionar el metabolismo de deltametrina, estimado in vitro mediante la incubación de este insecticida con fracciones microsomales, con el nivel de resistencia a este piretroide observado en los bioensayos con la línea W-1K. Por otro lado, no se encontró ninguna alteración en la región promotora 5'UTR del gen CYP6A51 (-500 pb desde el inicio de la traducción) que pudiera explicar su sobreexpresión en la línea W-1K. Los datos obtenidos sugieren que la resistencia a lambda-cihalotrina en la línea W-1K está mediada por P450 y que la sobreexpresión de CYP6A51 puede desempeñar un papel importante, aunque se necesitan más evidencias para establecer una asociación directa de la resistencia con este gen. Hemos estudiado la herencia, el coste biológico y la estabilidad de la resistencia a malatión mediada por la mutación G328A y la duplicación del gen Ccace2 (una de las copias lleva la mutación G328A). La línea susceptible C, donde no se encuentra la mutación G328A (genotipo S/S), se cruzó con dos isolíneas establecidas para representar genotipos únicos correspondientes a los dos mecanismos de resistencia asociados a la molécula diana: 1) la isolínea 267Y (genotipo R/R) establecida a partir de una pareja que portaba la mutación G328A en homocigosis; 2) la isolínea 306TY (genotipo RS/RS) establecida a partir de una pareja que portaba en homocigosis la duplicación del gen Ccace2. No se realizaron cruces recíprocos, ya que mediante experimentos de hibridación in situ en cromosomas politénicos se pudo comprobar que el locus de la AChE y la duplicación (probablemente en tándem) se localizan en el cromosoma autosómico 2L. La susceptibilidad al malatión de los parentales resistentes (R/R o RS/RS) y susceptibles (S/S), los cruces F1 (S/R, S/RS y R/RS) y los retrocruzamientos indican que la resistencia a malatión es semi-dominante en ambos casos. Sin embargo, nuestros resultados no fueron concluyentes con respecto a la naturaleza monogénica de la resistencia a malatión en estas isolíneas. Por lo tanto, no podemos descartar que otros genes que contribuyan a la resistencia, además de la mutación G328A (isolínea 267Y) y de la duplicación del gen Ccace2 (isolínea 306TY), puedan haber sido seleccionados durante el proceso de selección de 267Y y 306TY. Varios parámetros biológicos fueron evaluados para determinar si estos dos mecanismos de resistencia a malatión suponen un coste biológico para los genotipos resistentes. Individuos con genotipo R/R mostraron un retraso en el tiempo de desarrollo de huevo a pupa, un peso de pupa reducido y una menor longevidad de los adultos, en comparación con los individuos con genotipo S/S. Sin embargo, el peso de pupa de los individuos con genotipo RS/RS fue similar al de los individuos S/S, y su desarrollo de huevo a pupa intermedio entre S/S y R/R. Estas diferencias en el coste biológico pueden estar relacionadas con la reducción de la eficiencia catalítica de la AChE mutada en los individuos R/R, y al efecto compensatorio que la copia no mutada del gen tiene en los individuos RS/RS que portan la duplicación. La estabilidad de la resistencia a malatión mediada por la mutación G328A y la duplicación se analizó mediante el seguimiento de los caracteres de resistencia en la progenie de retrocruzamientos S/R x R/R y S/RS x RS/RS a lo largo de varias generaciones en ausencia de presión de selección con insecticidas. Nuestros resultados muestran que la frecuencia del alelo que porta la mutación G328A disminuyó desde 67,5% en la primera generación del retrocruzamiento S/R x R/R (75% esperado, asumiendo segregación mendeliana y que sólo hay dos alelos: uno mutado y otro no mutado) a 12% después de 10 generaciones. Por el contrario, la frecuencia de la duplicación sólo disminuyó desde 75% en en la primera generación del retrocruzamiento S/RS x RS/RS (75% esperado, asumiendo segregación Mendeliana y que la duplicación segrega como un único alelo) a 50% en el mismo período, lo que indica que la duplicación es más estable que la mutación. Asimismo, se analizó la presencia de la mutación y de la duplicación en poblaciones de campo recogidas en seis localidades en 2004-2007, cuando todavía se usaba el malatión, y se comparó con poblaciones recogidas en los mismos campos en 2010, un año después de la prohibición del malatión en la Unión Europea. La frecuencia media del genotipo susceptible (S/S) aumentó del 55,9% en el período 2004-2007 a 70,8% en 2010, mientras que la frecuencia de los genotipos portadores de la mutación en homocigosis o heterocigosis (R/R y S/R) disminuyó del 30,4 al 9,2%, los que llevan la duplicación en homocigosis o heterocigosis (RS/RS y S/RS) aumentaron levemente desde 12,8 hasta 13,3%, y los que llevan a la vez la mutación y la duplicación (R/RS) también aumentaron del 1 al 6,7%. Estos resultados son consistentes con que la duplicación del gen Ccace2 (con una copia con la mutación G328A y la otra copia no mutada) es más ventajosa que la mutación G328A por si sola, ya que la duplicación mantiene los niveles de resistencia a la vez que limita el coste biológico. Para investigar la asociación entre la resistencia a malatión y las mutaciones encontradas previamente en CcE7, hemos generado isolíneas con mutaciones específicas seleccionadas por su ubicación próxima a la entrada al centro activo de la enzima. La isolínea Sm2 (procedente de una hembra heterocigota para la mutación V96L y un macho homocigoto para el alelo no mutado) mantuvo altos niveles de resistencia a malatión, incluso después de 30 generaciones sin presión de selección. Por el contrario, la isolínea 267Y (compuesta por individuos homocigotos para la mutación L267Y) y la línea 306TY (compuesta por individuos homocigotos para la doble mutación R306T-N307Y) mostraron una reducción significativa en los niveles de resistencia. También hemos encontrado que la resistencia a malatión de la línea Sm2 fue parcialmente revertida por DEF y TPP, y que Sm2 mostró una reducción significativa en la actividad MTB, como se ha descrito en otras especies que muestran resistencia específica a malatión mediada por aliesterases. Además, fue posible asociar la presencia de la mutación V96L en individuos de la línea Sm2 con supervivencia a una concentración discriminante de malatión (5,000 ppm) y con una baja actividad MTB. Estos resultados sugieren una posible relación entre la mutación V96L en la aliesterasa CcE7 y la resistencia a malatión, aunque todavía no se puede concluir que la resistencia es causada por esta mutación, siendo necesarios más estudios para comprobar su contribución a la resistencia. En conclusión, se ha encontrado por primera vez resistencia a lambda-cihalotrina en poblaciones de campo de C. capitata, y nuestros resultados indican que las P450 son el principal mecanismo de resistencia en la línea W-1K. Esta situación se suma al caso previamente descrito de resistencia en campo a malatión asociada a la mutación G328A, a la duplicación del gen Ccace2 (una de las copias lleva la mutación G328A) y a resistencia metabólica mediada por esterasas. Nuestros resultados también indican que la alteración de la molécula diana AChE parece ser responsable de un cierto nivel de resistencia a malatión en C. capitata, que puede ser estimada como aproximadamente 25-40 veces para la mutación G328A y 40-60 veces para la duplicación; mientras que la resistencia mediada por esterasas y que ha sido asociada en este estudio con la mutación V96L en CcE7 puede conferir un efecto multiplicativo (por un factor de 5 a 10) aumentando la resistencia a malatión a 200-400 veces. Por otra parte, hemos demostrado que los insectos resistentes que llevan la duplicación tienen un coste biológico menor y muestran una estabilidad mayor que aquellos con la mutación G328A en ausencia de presión de selección con insecticidas. Esto representa un escenario en el que los genotipos con la duplicación permanecerán en el campo en frecuencias bajas a moderadas, pero podrían ser seleccionados rápidamente si se utilizan malatión u otros insecticidas que muestren resistencia cruzada. Estos resultados tienen importantes implicaciones para los programas de manejo de la resistencia, ya que el repertorio de insecticidas eficaces para el control de C. capitata es cada vez más limitado. Además, la coexistencia de múltiples mecanismos de resistencia en poblaciones de campo ofrece el potencial para desarrollar resistencia frente a otros insecticidas disponibles para el control de esta plaga. Estrategias para de manejo de la resistencia basadas en la alternancia de insecticidas con diferentes modos de acción, y su combinación con otros métodos de control, deben ser implementadas para evitar el desarrollo de resistencia en campo. ABSTRACT The Mediterranean fruit fly (Medfly), Ceratitis capitata (Wiedemann, 1824) (Diptera: Tephritidae), is one of the most economically damaging pests of citrus and other fruit crops worldwide. Control measures in citrus crops in Spain from the mid 90's to 2009 were mainly based on field monitoring of population levels and aerial and ground treatments with malathion bait sprays. However, since the withdrawal of phytosanitary products containing malathion in the European Union in 2009, lambda-cyhalothrin and spinosad have become the most widely used insecticides for the control of this pest. Resistance to malathion was found in Spanish field populations of C. capitata in 2004-2005. This resistance has been associated with a mutation G328A in the acetylcholinesterase (AChE), a duplication of the AChE gene (Ccace2) (one of the copies bearing the mutation G328A), and metabolic resistance mediated by esterases (probably aliesterases). However, when the gene of the aliesterase CcE7 was sequenced in individuals from a malathion resistant strain of C. capitata, none of the known G137D and/or W251L/S/G mutations associated to resistance in other species were found, though other mutations were detected when compared with individuals from a susceptible strain. Noteworthy, a lambda-cyhalothrin resistant strain (W-1K) was obtained by selecting a field-derived malathion resistant strain (W-4Km) with lambda-cyhalothrin. Moreover, it has also been demonstrated the capacity of this species to develop resistance to spinosad by laboratory selection. The multiple resistance mechanisms identified highlight the potential of this species to develop resistance to insecticides with different modes of action. The objectives of this PhD Thesis are: 1) to assess the susceptibility of Spanish field populations of C. capitata to lambda-cyhalothrin and to elucidate the resistance mechanisms in the W-1Kλ strain; 2) to compare the inheritance, fitness cost and stability of the malathion resistance mediated by the G328A mutation and the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A); and 3) to investigate the role of the aliesterase CcαE7 mutations in malathion resistance. All these studies will be of use for devising proactive resistance management strategies that could prevent or delay resistance development and would increase the sustainability of the insecticides available for Medfly control. Our results indicate that Spanish field populations of C. capitata have developed resistance to lambda-cyhalothrin. The LC50 values estimated for populations collected at Comunidad Valenciana, Cataluña and Andalucía ranged from 129 ppm to 287 ppm, equaling or overpassing the recommended concentration for field treatments (125 ppm). These results contrast with those obtained with three different Tunisian field populations, whose susceptibility was similar to that of the control (C) strain. The lambda-cyhalothrin resistant W-1K strain has been further selected to achieve a 205-fold resistance compared to the C strain, being its LC50 (4,224 ppm) more than 30 times higher than the recommended concentration for field applications. This resistant strain showed high levels of cross-resistance to deltamethrin (150-fold) and etofenprox (240-fold), suggesting that the development of resistance to lambda-cyhalothrin may compromise the effectiveness of other pyrethroids for the control of this species. We have shown that the resistance of the W-1K strain to lambda-cyhalothrin was almost completely suppressed by the synergist PBO, indicating that P450 enzymes play a very important role in resistance to this insecticide. However, both susceptible C and resistant W-1K flies were knocked down after topical treatment with lambda-cyhalothrin, suggesting that kdr resistance mediated by alterations of the target site is not playing a major role. Metabolic resistance mediated by P450 was further analyzed by comparing the expression of 53 genes of the families CYP4, CYP6, CYP9 and CYP12 in adults flies from the resistant W-1K and the susceptible C strains. We found that the gene CYP6A51 (GenBank accession number XM_004534804) was overexpressed (13-18-fold) in the W-1K strain. Moreover, the expression of the CYP6A51 gene was induced when adults of the W-1K and C strains were treated with lambda-cyhalothrin. However, no significant differences were obtained between susceptible C and resistant W-1K strains for the quantity of P450 and for the activity of NADPH- cytochrome c reductase measured in microsomal fractions obtained from abdomens. Moreover, we failed to correlate the metabolism of deltamethrin, analyzed in vitro by incubating this insecticide with microsomal fractions, with the resistance level against this pyrethroid observed in bioassays with W-1K. The sequencing of the 5´UTR region of the CYP6A51 gene failed in finding an alteration in the promoter region (-500 bp from translation start site) that could explain overexpression in the W-1K strain. All data obtained suggest that resistance to lambda-cyhalothrin in the W- 1K strain is mediated by P450 and that overexpression of CYP6A51 may play a major role, although further evidences are needed to establish a direct association of resistance with this gene. We have studied the inheritance, fitness cost and stability of the malathion resistance mediated by the G328A mutation and the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A). The malathion-susceptible C strain where the G328A mutation is not found (S/S genotype) was crossed with two isolines established to represent unique genotypes corresponding to the two target-site resistance mechanisms: 1) the 267Y isoline (genotype R/R) was established from a couple bearing the mutation G328A in homozygosis; and 2) the 306TY isoline (genotype RS/RS) was established from a couple being homozygous for the duplication of the Ccace2 gene. Reciprocal crosses have not been performed, since in situ hybridization on polythene chromosomes showed that the AChE locus and the duplication (most probably in tandem) are placed at the autosomal chromosome 2L. Mortality responses to malathion of resistant isolines (R/R or RS/RS) and susceptible (S/S) genotypes, F1 crosses (S/R, S/RS, and R/RS), and the back-crosses indicated that resistance to malathion is inherited as a semi-dominant trait in both cases. However, our results were not conclusive about the monogenic nature of the resistance to malathion in these isolines. Thus, we can not discard that other genes contributing to resistance, in addition to the mutation G328A (isoline 267Y) and the duplication of the Ccace2 gene (isoline 306TY), may have been selected during the selection process of 267Y and 306TY. Several biological parameters were evaluated to determine if these two malathion resistance mechanisms impose a fitness cost for resistant genotypes. Individuals with genotype R/R have a reduced fitness in terms of developmental time from egg to pupa, pupal weight and adult longevity, when compared to susceptible individuals (genotype S/S). Interestingly, the fitness cost was substantially diminished in individuals with genotype RS/RS. These differences in fitness may be related to the reduction of the catalytic efficiency of mutated AChE in individuals R/R, and the compensatory effect that the non-mutated copy of the gene has on individuals RS/RS bearing the duplication. The stability of malathion reistance associated with the mutation G328A or the duplication was analyzed by following these resistant traits in the progeny of the back-crosses S/RS x RS/RS and S/R x R/R over consecutive generations in the absence of insecticide selection pressure. Our results show that the frequency of the allele bearing the mutation G328A decreased from 67.5% at the first generation of the back-cross S/R x R/R (75% expected, assuming Mendelian segregation and that there are only two alleles: one mutated and the other non-mutated) to 12% after 10 generations. By contrast, the frequency of the duplication only declined from 75% at the first generation of the back-cross S/RS x RS/RS (75% expected, assuming Mendelian segregation and that the duplication segregates as an unique allele) to 50% in the same period, indicating that the duplication is more stable than the mutation. The presence of the mutation and the duplication was analyzed in field populations collected in six localities in 2004-2007, when malathion was still used, and compared to populations collected in the same fields in 2010, one year after the prohibition of malathion in the European Union. The average frequency of the susceptible genotype (S/S) increased from 55.9% in the period 2004-2007 to 70.8% in 2010, whereas the frequency of those genotypes carrying the mutation in homozygosis or heterozygosis (R/R and S/R) declined from 30.4 to 9.2%, those carrying the duplication in homozygosis or heterozygosis (RS/RS and S/RS) increased slightly from 12.8 to 13.3%, and those carrying both the mutation and the duplication (R/RS) also increased from 1 to 6.7%. These results are consistent with the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A and the other copy non-mutated) being more advantageous than the G328A mutation alone by maintaining resistance while restoring part of the fitness. In order to investigate the association of malathion resistance with mutations previously found in the aliesterase CcE7, we have generated isolines bearing specific mutations selected by their putative location near the upper part of the active site gorge of the enzyme. The isoline Sm2 (originating from a female heterozygous for the mutation V96L and a male homozygous for the non-mutated allele) kept high levels of resistance to malathion, even after 30 generations without selection pressure. On the contrary, the isoline 267Y (composed by individuals homozygous for the mutation L267Y) and the strain 306TY (composed by homozygous for the double mutation R306T-N307Y) showed a significant reduction in the levels of resistance. We have found also that resistance to malathion in the Sm2 isoline was partially reverted by DEF and TPP, and that Sm2 showed a significant reduction in MTB activity, as reported for other species showing malathion-specific resistance mediated by aliesterases. Besides, it was possible to associate the presence of the mutation V96L in individuals from the Sm2 isoline with both survival to a discriminating concentration of malathion (5,000 ppm) and low MTB activity. Our results point out to a possible connection betwen the mutation V96L in the aliesterase CcE7 and resistance to malathion, though we can not yet conclude that the resistance is caused by the mutation, being needed further work to understand its contribution to resistance. In conclusion, resistance to lambda-cyhalothrin has been found for the first time in field populations of C. capitata, and metabolic resistance mediated by P450 appears to be the main resistance mechanism in the resistant strain W-1K. These findings add to the previously reported case of field resistance to malathion, associated to the G328A mutation and the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A) and to metabolic resistance mediated by esterases. Our results also indicate that altered target site AChE appears to be responsible for a certain level of resistance to malathion in C. capitata, that can be estimated as about 25-40-fold for the mutation G328A and 40-60-fold for the duplication; whereas metabolic resistance mediated by esterases and associated in this study with the mutation V96L in CcE7 may confer a multiplicative effect (by a factor of 5 to10) increasing malathion resistance to 200-400-fold. Moreover, we have shown that resistant insects carrying the duplication have better fitness and exhibit a higher stability than those with the mutation G328A in the absence of insecticide pressure. This represents a scenario where genotypes with the duplication will remain in the field at low to moderate frequencies, but could be rapidly selected if malathion or other insecticides showing cross-resistance are used. These findings have important implications for resistance management programs, as the repertoire of effective insecticides for C. capitata control is becoming very limited. Besides, multiple resistance mechanisms coexisting in field populations provide the potential to develop resistance to other available insecticides for the control of this pest. Appropriate resistance management strategies based on the alternation of insecticides with different modes of action, and their combination with other control methods, must then be implemented to avoid the evolution of resistance in the field.

Higher-order regularization and morphological techniques for image segmentation

La segmentación de imágenes es un campo importante de la visión computacional y una de las áreas de investigación más activas, con aplicaciones en comprensión de imágenes, detección de objetos, reconocimiento facial, vigilancia de vídeo o procesamiento de imagen médica. La segmentación de imágenes es un problema difícil en general, pero especialmente en entornos científicos y biomédicos, donde las técnicas de adquisición imagen proporcionan imágenes ruidosas. Además, en muchos de estos casos se necesita una precisión casi perfecta. En esta tesis, revisamos y comparamos primero algunas de las técnicas ampliamente usadas para la segmentación de imágenes médicas. Estas técnicas usan clasificadores a nivel de pixel e introducen regularización sobre pares de píxeles que es normalmente insuficiente. Estudiamos las dificultades que presentan para capturar la información de alto nivel sobre los objetos a segmentar. Esta deficiencia da lugar a detecciones erróneas, bordes irregulares, configuraciones con topología errónea y formas inválidas. Para solucionar estos problemas, proponemos un nuevo método de regularización de alto nivel que aprende información topológica y de forma a partir de los datos de entrenamiento de una forma no paramétrica usando potenciales de orden superior. Los potenciales de orden superior se están popularizando en visión por computador, pero la representación exacta de un potencial de orden superior definido sobre muchas variables es computacionalmente inviable. Usamos una representación compacta de los potenciales basada en un conjunto finito de patrones aprendidos de los datos de entrenamiento que, a su vez, depende de las observaciones. Gracias a esta representación, los potenciales de orden superior pueden ser convertidos a potenciales de orden 2 con algunas variables auxiliares añadidas. Experimentos con imágenes reales y sintéticas confirman que nuestro modelo soluciona los errores de aproximaciones más débiles. Incluso con una regularización de alto nivel, una precisión exacta es inalcanzable, y se requeire de edición manual de los resultados de la segmentación automática. La edición manual es tediosa y pesada, y cualquier herramienta de ayuda es muy apreciada. Estas herramientas necesitan ser precisas, pero también lo suficientemente rápidas para ser usadas de forma interactiva. Los contornos activos son una buena solución: son buenos para detecciones precisas de fronteras y, en lugar de buscar una solución global, proporcionan un ajuste fino a resultados que ya existían previamente. Sin embargo, requieren una representación implícita que les permita trabajar con cambios topológicos del contorno, y esto da lugar a ecuaciones en derivadas parciales (EDP) que son costosas de resolver computacionalmente y pueden presentar problemas de estabilidad numérica. Presentamos una aproximación morfológica a la evolución de contornos basada en un nuevo operador morfológico de curvatura que es válido para superficies de cualquier dimensión. Aproximamos la solución numérica de la EDP de la evolución de contorno mediante la aplicación sucesiva de un conjunto de operadores morfológicos aplicados sobre una función de conjuntos de nivel. Estos operadores son muy rápidos, no sufren de problemas de estabilidad numérica y no degradan la función de los conjuntos de nivel, de modo que no hay necesidad de reinicializarlo. Además, su implementación es mucho más sencilla que la de las EDP, ya que no requieren usar sofisticados algoritmos numéricos. Desde un punto de vista teórico, profundizamos en las conexiones entre operadores morfológicos y diferenciales, e introducimos nuevos resultados en este área. Validamos nuestra aproximación proporcionando una implementación morfológica de los contornos geodésicos activos, los contornos activos sin bordes, y los turbopíxeles. En los experimentos realizados, las implementaciones morfológicas convergen a soluciones equivalentes a aquéllas logradas mediante soluciones numéricas tradicionales, pero con ganancias significativas en simplicidad, velocidad y estabilidad. ABSTRACT Image segmentation is an important field in computer vision and one of its most active research areas, with applications in image understanding, object detection, face recognition, video surveillance or medical image processing. Image segmentation is a challenging problem in general, but especially in the biological and medical image fields, where the imaging techniques usually produce cluttered and noisy images and near-perfect accuracy is required in many cases. In this thesis we first review and compare some standard techniques widely used for medical image segmentation. These techniques use pixel-wise classifiers and introduce weak pairwise regularization which is insufficient in many cases. We study their difficulties to capture high-level structural information about the objects to segment. This deficiency leads to many erroneous detections, ragged boundaries, incorrect topological configurations and wrong shapes. To deal with these problems, we propose a new regularization method that learns shape and topological information from training data in a nonparametric way using high-order potentials. High-order potentials are becoming increasingly popular in computer vision. However, the exact representation of a general higher order potential defined over many variables is computationally infeasible. We use a compact representation of the potentials based on a finite set of patterns learned fromtraining data that, in turn, depends on the observations. Thanks to this representation, high-order potentials can be converted into pairwise potentials with some added auxiliary variables and minimized with tree-reweighted message passing (TRW) and belief propagation (BP) techniques. Both synthetic and real experiments confirm that our model fixes the errors of weaker approaches. Even with high-level regularization, perfect accuracy is still unattainable, and human editing of the segmentation results is necessary. The manual edition is tedious and cumbersome, and tools that assist the user are greatly appreciated. These tools need to be precise, but also fast enough to be used in real-time. Active contours are a good solution: they are good for precise boundary detection and, instead of finding a global solution, they provide a fine tuning to previously existing results. However, they require an implicit representation to deal with topological changes of the contour, and this leads to PDEs that are computationally costly to solve and may present numerical stability issues. We present a morphological approach to contour evolution based on a new curvature morphological operator valid for surfaces of any dimension. We approximate the numerical solution of the contour evolution PDE by the successive application of a set of morphological operators defined on a binary level-set. These operators are very fast, do not suffer numerical stability issues, and do not degrade the level set function, so there is no need to reinitialize it. Moreover, their implementation is much easier than their PDE counterpart, since they do not require the use of sophisticated numerical algorithms. From a theoretical point of view, we delve into the connections between differential andmorphological operators, and introduce novel results in this area. We validate the approach providing amorphological implementation of the geodesic active contours, the active contours without borders, and turbopixels. In the experiments conducted, the morphological implementations converge to solutions equivalent to those achieved by traditional numerical solutions, but with significant gains in simplicity, speed, and stability.

Fishing effort control regulations influence on stability, safety and operability of small fishing vessels: study of a series of stability related accidents occurred in Spain between 2004 and 2007

Entre los años 2004 y 2007 se hundieron por problemas de estabilidad cinco pesqueros españoles de pequeña eslora, de características parecidas, de relativamente poca edad, que habían sido construidos en un intervalo de pocos años. La mayoría de los tripulantes de esos pesqueros fallecieron o desaparecieron en esos accidentes. Este conjunto de accidentes tuvo bastante repercusión social y mediática. Entre ingenieros navales y marinos del sector de la pesca se relacionó estos accidentes con los condicionantes a los diseños de los pesqueros impuestos por la normativa de control de esfuerzo pesquero. Los accidentes fueron investigados y publicados sus correspondientes informes; en ellos no se exploró esta supuesta relación. Esta tesis pretende investigar la relación entre esos accidentes y los cambios de la normativa de esfuerzo pesquero. En la introducción se expone la normativa de control de esfuerzo pesquero analizada, se presentan datos sobre la estructura de la flota pesquera en España y su accidentalidad, y se detallan los criterios de estabilidad manejados durante el trabajo, explicando su relación con la seguridad de los pesqueros. Seguidamente se realiza un análisis estadístico de la siniestralidad en el sector de la pesca para establecer si el conjunto de accidentes estudiados supone una anomalía, o si por el contrario el conjunto de estos accidentes no es relevante desde el punto de vista estadístico. Se analiza la siniestralidad a partir de diversas bases de datos de buques pesqueros en España y se concluye que el conjunto de accidentes estudiados supone una anomalía estadística, ya que la probabilidad de ocurrencia de los cinco sucesos es muy baja considerando la frecuencia estimada de pérdidas de buques por estabilidad en el subsector de la flota pesquera en el que se encuadran los cinco buques perdidos. A continuación el trabajo se centra en la comparación de los buques accidentados con los buques pesqueros dados de baja para construir aquellos, según exige la normativa de control de esfuerzo pesquero; a estos últimos buques nos referiremos como “predecesores” de los buques accidentados. Se comparan las dimensiones principales de cada buque y de su predecesor, resultando que los buques accidentados comparten características de diseño comunes que son sensiblemente diferentes en los buques predecesores, y enlazando dichas características de diseño con los requisitos de la nueva normativa de control del esfuerzo pesquero bajo la que se construyeron estos barcos. Ello permite establecer una relación entre los accidentes y el mencionado cambio normativo. A continuación se compara el margen con que se cumplían los criterios reglamentarios de estabilidad entre los buques accidentados y los predecesores, encontrándose que en cuatro de los cinco casos los predecesores cumplían los criterios de estabilidad con mayor holgura que los buques accidentados. Los resultados obtenidos en este punto permiten establecer una relación entre el cambio de normativa de esfuerzo pesquero y la estabilidad de los buques. Los cinco buques accidentados cumplían con los criterios reglamentarios de estabilidad en vigor, lo que cuestiona la relación entre esos criterios y la seguridad. Por ello se extiende la comparativa entre pesqueros a dos nuevos campos relacionados con la estabilidad y la seguridad delos buques: • Movimientos a bordo (operatividad del buque), y • Criterios de estabilidad en condiciones meteorológicas adversas El estudio de la operatividad muestra que los buques accidentados tenían, en general, una mayor operatividad que sus predecesores, contrariamente a lo que sucedía con el cumplimiento de los criterios reglamentarios de estabilidad. Por último, se comprueba el desempeño de los diez buques en dos criterios específicos de estabilidad en caso de mal tiempo: el criterio IMO de viento y balance intenso, y un criterio de estabilidad de nueva generación, incluyendo la contribución original del autor de considerar agua en cubierta. Las tendencias observadas en estas dos comparativas son opuestas, lo que permite cuestionar la validez del último criterio sin un control exhaustivo de los parámetros de su formulación, poniendo de manifiesto la necesidad de más investigaciones sobre ese criterio antes de su adopción para uso regulatorio. El conjunto de estos resultados permite obtener una serie de conclusiones en la comparativa entre ambos conjuntos de buques pesqueros. Si bien los resultados de este trabajo no muestran que la aprobación de la nueva normativa de esfuerzo pesquero haya significado una merma general de seguridad en sectores enteros de la flota pesquera, sí se concluye que permitió que algunos diseños de buques pesqueros, posiblemente en busca de la mayor eficiencia compatible con dicha normativa, quedaran con una estabilidad precaria, poniendo de manifiesto que la relación entre seguridad y criterios de estabilidad no es unívoca, y la necesidad de que éstos evolucionen y se adapten a los nuevos diseños de buques pesqueros para continuar garantizando su seguridad. También se concluye que la estabilidad es un aspecto transversal del diseño de los buques, por lo que cualquier reforma normativa que afecte al diseño de los pesqueros o su forma de operar debería estar sujeta a evaluación por parte de las autoridades responsables de la seguridad marítima con carácter previo a su aprobación. ABSTRACT Between 2004 and 2007 five small Spanish fishing vessels sank in stability related accidents. These vessels had similar characteristics, had relatively short age, and had been built in a period of a few years. Most crewmembers of these five vessels died or disappeared in those accidents. This set of accidents had significant social and media impact. Among naval architects and seamen of the fishing sector these accidents were related to the design constraints imposed by the fishing control effort regulations. The accidents were investigated and the official reports issued; this alleged relationship was not explored. This thesis aims to investigate the relationship between those accidents and changes in fishing effort control regulations. In the introduction, the fishing effort control regulation is exposed, data of the Spanish fishing fleet structure and its accident rates are presented, and stability criteria dealt with in this work are explained, detailing its relationship with fishing vessel safety. A statistical analysis of the accident rates in the fishing sector in Spain is performed afterwards. The objective is determining whether the set of accidents studied constitute an anomaly or, on the contrary, they are not statistically relevant. Fishing vessels accident rates is analyzed from several fishing vessel databases in Spain. It is concluded that the set of studied accidents is statistically relevant, as the probability of occurrence of the five happenings is extremely low, considering the loss rates in the subsector of the Spanish fishing fleet where the studied vessels are fitted within. From this point the thesis focuses in comparing the vessels lost and the vessels that were decommissioned to build them as required by the fishing effort control regulation; these vessels will be referred to as “predecessors” of the sunk vessels. The main dimensions between each lost vessel and her predecessor are compared, leading to the conclusion that the lost vessels share design characteristics which are sensibly different from the predecessors, and linking these design characteristics with the requirements imposed by the new fishing control effort regulations. This allows establishing a relationship between the accidents and this regulation change. Then the margin in fulfilling the regulatory stability criteria among the vessels is compared, resulting, in four of the five cases, that predecessors meet the stability criteria with greater clearance than the sunk vessels. The results obtained at this point would establish a relationship between the change of fishing effort control regulation and the stability of vessels. The five lost vessels complied with the stability criteria in force, so the relation between these criteria and safety is put in question. Consequently, the comparison among vessels is extended to other fields related to safety and stability: • Motions onboard (operability), and • Specific stability criteria in rough weather The operability study shows that the lost vessels had in general greater operability than their predecessors, just the opposite as when comparing stability criteria. Finally, performance under specific rough weather stability criteria is checked. The criteria studied are the IMO Weather Criterion, and one of the 2nd generation stability criteria under development by IMO considering in this last case the presence of water on deck, which is an original contribution by the author. The observed trends in these two cases are opposite, allowing to put into question the last criterion validity without an exhaustive control of its formulation parameters; indicating that further research might be necessary before using it for regulatory purposes. The analysis of this set of results leads to some conclusions when comparing both groups of fishing vessels. While the results obtained are not conclusive in the sense that the entry into force of a new fishing effort control in 1998 caused a generalized safety reduction in whole sectors of the Spanish fishing fleet, it can be concluded that it opened the door for some vessel designs resulting with precarious stability. This evidences that the relation between safety and stability criteria is not univocal, so stability criteria needs to evolve for adapting to new fishing vessels designs so their safety is still guaranteed. It is also concluded that stability is a transversal aspect to ship design and operability, implying that any legislative reform affecting ship design or operating modes should be subjected to assessing by the authorities responsible for marine safety before being adopted.

Glassy State and Cryopreservation of Mint Shoot Tips

Vitrification refers to the physical process by which a liquid supercools to very low tem- peratures and finally solidifies into a metastable glass, without undergoing crystallization at a practical cooling rate. Thus, vitrification is an effective freeze-avoidance mechanism and living tissue cryopreservation is, in most cases, relying on it. As a glass is exceedingly vis- cous and stops all chemical reactions that require molecular diffusion, its formation leads to metabolic inactivity and stability over time. To investigate glassy state in cryopreserved plant material, mint shoot tips were submitted to the different stages of a frequently used cryopreservation protocol (droplet-vitrification) and evaluated for water content reduction and sucrose content, as determined by ion chromatography, frozen water fraction and glass transitions occurrence by differential scanning calorimetry, and investigated by low-tempera- ture scanning electron microscopy, as a way to ascertain if their cellular content was vitri- fied. Results show how tissues at intermediate treatment steps develop ice crystals during liquid nitrogen cooling, while specimens whose treatment was completed become vitrified, with no evidence of ice formation. The agreement between calorimetric and microscopic observations was perfect. Besides finding a higher sucrose concentration in tissues at the more advanced protocol steps, this level was also higher in plants precultured at 25/21?C than in plants cultivated at 25?C.

Design and analysis of ripple-based controls based on the discrete modeling and Floquet theory

Ripple-based controls can strongly reduce the required output capacitance in PowerSoC converter thanks to a very fast dynamic response. Unfortunately, these controls are prone to sub-harmonic oscillations and several parameters affect the stability of these systems. This paper derives and validates a simulation-based modeling and stability analysis of a closed-loop V 2Ic control applied to a 5 MHz Buck converter using discrete modeling and Floquet theory to predict stability. This allows the derivation of sensitivity analysis to design robust systems. The work is extended to different V 2 architectures using the same methodology.

Numerical and experimental study of the dynamics of axisymmetric slender liquid bridges

A one-dimensional inviscid slice model has been used to study numerically the influence of axial microgravity on the breaking of liquid bridges having a volume close to that of gravitationless minimum volume stability limit. Equilibrium shapes and stability limits have been obtained as well as the dependence of the volume of the two drops formed after breaking on both the length and the volume of the liquid bridge. The breaking process has also been studied experimentally. Good agreement has been found between theory and experiment for neutrally buoyant systems