Materials Research for HiPER Laser Fusion Facilities: Chamber Wall, Structural Material and Final Optics

The European HiPER project aims to demonstrate commercial viability of inertial fusion energy within the following two decades. This goal requires an extensive Research &Development program on materials for different applications (e.g., first wall, structural components and final optics). In this paper we will discuss our activities in the framework of HiPER to develop materials studies for the different areas of interest. The chamber first wall will have to withstand explosions of at least 100 MJ at a repetition rate of 5-10 Hz. If direct drive targets are used, a dry wall chamber operated in vacuum is preferable. In this situation the major threat for the wall stems from ions. For reasonably low chamber radius (5-10 m) new materials based on W and C are being investigated, e.g., engineered surfaces and nanostructured materials. Structural materials will be subject to high fluxes of neutrons leading to deleterious effects, such as, swelling. Low activation advanced steels as well as new nanostructured materials are being investigated. The final optics lenses will not survive the extreme ion irradiation pulses originated in the explosions. Therefore, mitigation strategies are being investigated. In addition, efforts are being carried out in understanding optimized conditions to minimize the loss of optical properties by neutron and gamma irradiation

Using Virtual Reality in the teaching of manufacturing processes with material removal in CNC Machine-Tools

This paper presents a methodology for the incorporation of a Virtual Reality development applied to the teaching of manufacturing processes, namely the group of machining processes in numerical control of machine tools. The paper shows how it is possible to supplement the teaching practice through virtual machine-tools whose operation is similar to the 'real' machines while eliminating the risks of use for both users and the machines.

Approximation to earth material from international normative

For centuries, earth has been used as a construction material. Nevertheless, the normative in this matter is very scattered, and the most developed countries, to carry out a construction with this material implies a variety of technical and legal problems. In this paper we review, in an international level, the normative panorama about earth constructions. It analyzes ninety one standards and regulations of countries all around the five continents. These standards represent the state of art that normalizes the earth as a construction material. In this research we analyze the international standards to earth construction, focusing on durability test (spray and drip erosion tests). It analyzes the differences between methods of test. Also we show all results about these tests in two types of compressed earth block.

Diseño y construcción del vertedero para el depósito del material de excavación del túnel del Espiño (Orense)

El presente documento presenta la definición de las obras e instalaciones necesarias para dar cobertura a unos niveles de producción de material de excavación proveniente del túnel del Espiño, para lo cual se decide construir el Vertedero del Espiño. Dicho vertedero cumple con la normativa ambiental, una vez finalizadas las actividades dentro del túnel el vertedero se clausura, sella y recupera medioambientalmente la zona afectada. Para ello se incluyen todos los documentos necesarios para la definición, justificación y valoración de las obras. This paper presents the definition of works and facilities needed to cover production levels of material from tunnel excavation Espiño, for which it is decided to build the weir Espiño. This landfill complies with environmental regulations, once finalized the activities inside the tunnel the landfill closes, environmentally sealed and recovers the affected area. To do all the necessary documents for the definition, justification and evaluation of the works included

Integrated Studies for the Evaluation of Conservation Treatments on Stone Material from Archaeological Sites. Application to the Case of Merida (Spain)

The application of conservation treatments, such as consolidation and protection ones, has been demonstrated ineffective in many cases, and even harmful. Evaluation studies should be a mandatory task, ideally before and after the intervention, but both tasks are complex and unusual in the case of archaeological heritage. This study is mainly focused on analyzing changes in petrophysical properties of stone material from archaeological sites of Merida (Spain), evaluating, both on site and in laboratory, effects derived from different conservation treatments applied in past interventions, throughout the integration of different non-destructive techniques (NDT) and portable devices of analysis available at the Institute of Geosciences (CSIC,UCM). These techniques allow, not only assessment of effectiveness and alteration processes, but also monitoring durability of treatments, focused mainly on 1996 intervention in the case of Roman Theater, as well as different punctual interventions from the 90’s until date in the House of Mitreo. Studies carried out on archaeological sites of Merida permit us to compare outcomes and also check limitations in the use of those equipments. In this paper we discuss about the use of some techniques, their integration and limits, for the assessment of conservation treatments, showing some examples of Merida’s case study.

Seven Ulmus minor clones tolerant to Ophiostoma novo-ulmi registered as forest reproductive material in Spain

The Spanish elm programme began in 1986 in response to the devastating impact of Dutch elm disease on natural elm stands and urban trees. Its main objectives were to conserve remaining genetic resources and select and breed tolerant native elm genotypes. After 27 years of work conducting susceptibility trials on thousands of elm genotypes, the first seven tolerant Ulmus minor trees are now being registered by the Spanish Environmental Administration. This paper presents the results of the susceptibility tests on these clones and their distinctive genetic, morphological and phenological features. In all susceptibility trials the commercial ?Sapporo Autumn Gold? clone, which is highly tolerant to O. novo-ulmi, was used as a control. The registered clones were named ?Ademuz?, ?Dehesa de la Villa?, ?Majadahonda?, ?Toledo?, ?Dehesa de Amaniel?, ?Retiro? and ?Fuente Umbría?. The most tolerant clone was ?Dehesa de Amaniel?, as its wilting values were below 5% during the two consecutive inoculation trials performed in Madrid. ?Fuente Umbría?, tested over four consecutive years in Guadalajara and Palencia, was the Spanish clone with the most reliable tolerance level to O. novo-ulmi. The ?Ademuz? and ?Majadahonda? clones had the highest ornamental scores and are promising trees for use in urban environments and tree breeding for ornamental quality. These two genotypes showed a later bud burst phenology than the other U. minor clones, demonstrating suitability to areas with late frost events. The Spanish programme aims to substantially increase the range of tolerant native elms through new selections and crossings to gain a better understanding of the genetic basis of resistance.