Oxygen photo-adsorption related quenching of photoluminescence in group-III nitride nanocolumns

GaN and InGaN nanocolumns of various compositions are studied by room-temperature photoluminescence (PL) under different ambient conditions. GaN nanocolumns exhibit a reversible quenching upon exposure to air under constant UV excitation, following a t−1/2 time dependence and resulting in a total reduction of intensity by 85–90%, as compared to PL measured in vacuum, with no spectral change. This effect is not observed when exposing the samples to pure nitrogen. We attribute this effect to photoabsorption and photodesorption of oxygen that modifies the surface potential bending. InGaN nanocolumns, under the same experimental conditions do not show the same quenching features: The high-energy part of the broad PL line is not modified by exposure to air, whereas a lower-energy part, which does quench by 80–90%, can now be distinguished. We discuss the different behaviors in terms of carrier localization and possible composition or strain gradients in the InGaN nanocolumns.

Epidemiological characteristics and diagnostic approach in patients admitted to the emergency room for transient loos of consciousness: Group for Syncope Study in the Emergency Room (GESINUR) study

Aims: To assess the clinical presentation and acute management of patients with transient loss of consciousness (T-LOC) in the emergency department (ED). Methods and results: A multi-centre prospective observational study was carried out in 19 Spanish hospitals over 1 month. The patients included were 14 years old and were admitted to the ED because of an episode of T-LOC. Questionnaires and corresponding electrocardiograms (ECGs) were reviewed by a Steering Committee (SC) to unify diagnostic criteria, evaluate adherence to guidelines, and diagnose correctly the ECGs. We included 1419 patients (prevalence, 1.14%).ECG was performed in 1335 patients (94%) in the ED: 498 (37.3%) ECGs were classified as abnormal. The positive diagnostic yield ranged from 0% for the chest X-ray to 12% for the orthostatic test. In the ED, 1217 (86%) patients received a final diagnosis of syncope, whereas the remaining 202 (14%) were diagnosed of non-syncopal transient lossof consciousness (NST-LOC). After final review by the SC, 1080 patients (76%) were diagnosed of syncope, whereas 339 (24%) were diagnosed of NST-LOC (P , 0.001). Syncope was diagnosed correctly in 84% of patients. Only 25% of patients with T-LOC were admitted to hospitals. Conclusion Adherence to clinical guidelines for syncope management was low; many diagnostic tests were performed with low diagnostic yield. Important differences were observed between syncope diagnoses at the ED and by SC decision.

Augmenting PROV with Plans in P-PLAN: Scientific Processes as Linked Data

Provenance models are crucial for describing experimental results in science. The W3C Provenance Working Group has recently released the PROV family of specifications for provenance on the Web. While provenance focuses on what is executed, it is important in science to publish the general methods that describe scientific processes at a more abstract and general level. In this paper, we propose P-PLAN, an extension of PROV to represent plans that guid-ed the execution and their correspondence to provenance records that describe the execution itself. We motivate and discuss the use of P-PLAN and PROV to publish scientific workflows as Linked Data.

Preliminary approach to neutron instrument selecction at ESSB-Bilbao based on experience at ISIS molecular spectroscopy group

Collaborative efforts between the Neutronics and Target Design Group at the Instituto de Fusión Nuclear and the Molecular Spectroscopy Group at the ISIS Pulsed Neutron and Muon Source date back to 2012 in the context of the ESS-Bilbao project. The rationale for these joint activities was twofold, namely: to assess the realm of applicability of the low-energy neutron source proposed by ESS-Bilbao - for details; and to explore instrument capabilities for pulsed-neutron techniques in the range 0.05-3 ms, a time range where ESS-Bilbao and ISIS could offer a significant degree of synergy and complementarity. As part of this collaboration, J.P. de Vicente has spent a three-month period within the ISIS Molecular Spectroscopy Group, to gain hands-on experience on the practical aspects of neutron-instrument design and the requisite neutron-transport simulations. To date, these activities have resulted in a joint MEng thesis as well as a number of publications and contributions to national and international conferences. Building upon these previous works, the primary aim of this report is to provide a self-contained discussion of general criteria for instrument selection at ESS-Bilbao, the first accelerator-driven, low-energy neutron source designed in Spain. To this end, Chapter 1 provides a brief overview of the current design parameters of the accelerator and target station. Neutron moderation is covered in Chapter 2, where we take a closer look at two possible target-moderator-reflector configurations and pay special attention to the spectral and temporal characteristics of the resulting neutron pulses. This discussion provides a necessary starting point to assess the operation of ESSB in short- and long-pulse modes. These considerations are further explored in Chapter 3, dealing with the primary characteristics of ESS-Bilbao as a short- or long-pulse facility in terms of accessible dynamic range and spectral resolution. Other practical aspects including background suppression and the use of fast choppers are also discussed. The guiding principles introduced in the first three chapters are put to use in Chapter 4 where we analyse in some detail the capabilities of a small-angle scattering instrument, as well as how specific scientific requirements can be mapped onto the optimal use of ESS-Bilbao for condensed-matter research. Part 2 of the report contains additional supporting documentation, including a description of the ESSB McStas component, a detailed characterisation of moderator response and neutron pulses, and estimates ofparameters associated with the design and operation of neutron choppers. In closing this brief foreword, we wish to thank both ESS-Bilbao and ISIS for their continuing encouragement and support along the way.

Diseño de un Procesador de Membranas Paralelo para los Sistemas P de Transición

La computación con membranas surge como una alternativa a la computación tradicional. Dentro de este campo se sitúan los denominados Sistemas P de Transición que se basan en la existencia de regiones que contienen recursos y reglas que hacen evolucionar a dichos recursos para poder llevar a cada una de las regiones a una nueva situación denominada configuración. La sucesión de las diferentes configuraciones conforman la computación. En este campo, el Grupo de Computación Natural de la Universidad Politécnica de Madrid lleva a cabo numerosas investigaciones al amparo de las cuales se han publicado numerosos artículos y realizado varias tesis doctorales. Las principales vías de investigación han sido, hasta el momento, el estudio del modelo teórico sobre el que se definen los Sistemas P, el estudio de los algoritmos que se utilizan para la aplicación de las reglas de evolución en las regiones, el diseño de nuevas arquitecturas que mejoren las comunicaciones entre las diferentes membranas (regiones) que componen el sistema y la implantación de estos sistemas en dispositivos hardware que pudiesen definir futuras máquinas basadas en este modelo. Dentro de este último campo, es decir, dentro del objetivo de construir finalmente máquinas que puedan llevar a cabo la funcionalidad de la computación con Sistemas P, la presente tesis doctoral se centra en el diseño de dos procesadores paralelos que, aplicando variantes de algoritmos existentes, favorezcan el crecimiento en el nivel de intra-paralelismo a la hora de aplicar las reglas. El diseño y creación de ambos procesadores presentan novedosas aportaciones al entorno de investigación de los Sistemas P de Transición en tanto en cuanto se utilizan conceptos que aunque previamente definidos de manera teórica, no habían sido introducidos en el hardware diseñado para estos sistemas. Así, los dos procesadores mantienen las siguientes características: - Presentan un alto rendimiento en la fase de aplicación de reglas, manteniendo por otro lado una flexibilidad y escalabilidad medias que son dependientes de la tecnología final sobre la que se sinteticen dichos procesadores. - Presentan un alto nivel de intra-paralelismo en las regiones al permitir la aplicación simultánea de reglas. - Tienen carácter universal en tanto en cuanto no depende del carácter de las reglas que componen el Sistema P. - Tienen un comportamiento indeterminista que es inherente a la propia naturaleza de estos sistemas. El primero de los circuitos utiliza el conjunto potencia del conjunto de reglas de aplicación así como el concepto de máxima aplicabilidad para favorecer el intra-paralelismo y el segundo incluye, además, el concepto de dominio de aplicabilidad para determinar el conjunto de reglas que son aplicables en cada momento con los recursos existentes. Ambos procesadores se diseñan y se prueban mediante herramientas de diseño electrónico y se preparan para ser sintetizados sobre FPGAs. ABSTRACT Membrane computing appears as an alternative to traditional computing. P Systems are placed inside this field and they are based upon the existence of regions called “membranes” that contain resources and rules that describe how the resources may vary to take each of these regions to a new situation called "configuration". Successive configurations conform computation. Inside this field, the Natural Computing Group of the Universidad Politécnica of Madrid develops a large number of works and researches that provide a lot of papers and some doctoral theses. Main research lines have been, by the moment, the study of the theoretical model over which Transition P Systems are defined, the study of the algorithms that are used for the evolution rules application in the regions, the design of new architectures that may improve communication among the different membranes (regions) that compose the whole system and the implementation of such systems over hardware devices that may define machines based upon this new model. Within this last research field, this is, within the objective of finally building machines that may accomplish the functionality of computation with P Systems, the present thesis is centered on the design of two parallel processors that, applying several variants of some known algorithms, improve the level of the internal parallelism at the evolution rule application phase. Design and creation of both processors present innovations to the field of Transition P Systems research because they use concepts that, even being known before, were never used for circuits that implement the applying phase of evolution rules. So, both processors present the following characteristics: - They present a very high performance during the application rule phase, keeping, on the other hand, a level of flexibility and scalability that, even known it is not very high, it seems to be acceptable. - They present a very high level of internal parallelism inside the regions, allowing several rule to be applied at the same time. - They present a universal character meaning this that they are not dependent upon the active rules that compose the P System. - They have a non-deterministic behavior that is inherent to this systems nature. The first processor uses the concept of "power set of the application rule set" and the concept of "maximal application" number to improve parallelism, and the second one includes, besides the previous ones, the concept of "applicability domain" to determine the set of rules that may be applied in each moment with the existing resources.. Both processors are designed and tested with the design software by Altera Corporation and they are ready to be synthetized over FPGAs.

Escuela en Hunstanton de A+P Smithson: el Nuevo Brutalismo en Inglaterra

La tesis estudia en detalle la Hunstanton Secondary School y su trascendencia. Así, se trata de analizar el conjunto de procesos que hace que esta obra sea entendida como el manifiesto construido del Nuevo Brutalismo en Inglaterra. La Escuela en Hunstanton fue la primera obra proyectada y construida por los Smithson y, si se considera que el legado que dejaron Alison y Peter fue más de carácter teórico que constructivo, ésta se ha convertido en un edificio relevante dentro de su trayectoria profesional. Además, el rigor con el que fue realizado el proyecto y la ratificación de las ideas que subyacían tras él, a pesar del extenso intervalo temporal que caracterizó su proceso constructivo, hacen que esta obra se convierta en una síntesis de la filosofía arquitectónica gestada en Inglaterra tras la guerra. Por otro lado, hay que contemplar que la sencillez del lenguaje constructivo empleado, viene dada por la compleja reiteración de los sistemas proyectuales tipo que formulan para este proyecto y el establecimiento de una gramática casi matemática. La sistematización de su vocabulario hace que, tras el análisis de su arquitectura, se encuentren nuevos parámetros capaces de documentar este momento de la historia de la arquitectura en Inglaterra. La envolvente del edificio constituye al tiempo fachada y estructura. Esta característica ha pasado inadvertida cuando, en numerosas ocasiones y durante seis décadas, se han venido publicando las fotografías de la obra terminada y los dibujos que los Smithson habían realizado en la fase de proyecto. Como consecuencia, ha proliferado el conocimiento de la arquitectura de la escuela a un nivel más superficial, mostrando el resultado formal de la misma y con ello, simplemente se ha dejado intuir la gran influencia que Mies Van der Rohe provocó en los Smithson en los primeros años de desarrollo de su labor como arquitectos. El objetivo principal de esta tesis es, por tanto, facilitar el entendimiento del espacio que propusieron los Smithson a partir del análisis pormenorizado de los distintos sistemas constructivos empleados y del equipo personal que se vio implicado en su construcción. Para ello, es necesario abordar el estudio de los materiales y mecanismos proyectuales que hicieron posible que este conjunto de espacios –interiores y exteriores- resultase definido a través de la relación entre dos variables: una evidente austeridad en la utilización de los materiales y la combinación de los distintos sistemas intervinientes a partir del recurso de la repetición. La Escuela de Hunstanton, a pesar de las inoportunas intervenciones realizadas para adaptar el centro a unas necesidades derivadas de su número de alumnos actual (el doble que en su inicio), continúa proclamando su integridad espacial. Partiendo de la hipótesis de que la arquitectura de la Secondary School en Hunstanton, representa el manifiesto construido del Nuevo Brutalismo en Inglaterra, se concluye que el resultado de su construcción fue consecuencia de numerosas influencias que, en relación con los Smithson, estuvieron presentes durante los años en que se gestó. Algo que va más allá de la conclusión de aquellos debates arquitectónicos que se habían emprendido, por escrito, en las distintas revistas locales de arquitectura. Los mecanismos compositivos empleados, también habían tenido mucho que ver con lo que los historiadores del arte habían venido aportando a la historia de la arquitectura hasta ese momento. Desde los años 40, éstos últimos habían emprendido una nueva manera de contar la historia en la que quedaba fuertemente involucrada su capacidad crítica, provocando interferencias en la mentalidad de los arquitectos de nueva generación y otorgándoles un bagaje cultural subliminalmente determinado y subjetivo. Por supuesto, en el resultado arquitectónico final, también tuvieron mucho que ver los recursos materiales de que se disponía en aquel momento. Así como la optimización de los mismos a través de la adopción de nuevas metodologías de trabajo como puede ser la organización multidisciplinar. La inclusión del ingeniero Ronald Jenkins en el equipo de trabajo de los Smithson supuso una gran oportunidad. Este ingeniero, propuso poner en práctica la entonces innovadora Teoría Plástica en la metodología de cálculo estructural y, con ello consiguió enriquecer el resultado espacial, posibilitando la percepción de una arquitectura ligera –a pesar de sus grandes dimensiones- y vinculada al paisaje donde se inserta. Pero todos estos condicionantes fueron pasados a su vez por el filtro del deseo de una regeneración social, que buscaba el modelo de la sociedad americana. El Buen Vivir que propugnaban los americanos, viajaba a Europa de la mano de la publicidad. Y, al igual que la componente publicitaria tuvo algo que ver en el proceso creativo de la arquitectura de la escuela, también lo tuvo el conocimiento del arte pop y sus recursos compositivos. ABSTRACT The thesis examines in detail the project of Hunstanton Secondary School and the architectural language’s significance used in it. Thus, it is reinterpreting the set of processes that makes this work to be understood as the “built manifesto” of the English New Brutalism. Hunstanton School’s project was the first work designed and built by the Smithsons and, considering their legacy -more theoretical than constructed-, make of this building an important work within their career. In addition, the rigor with which it was carried out the project and the ratification of the ideas lying behind him, make this work becomes a synthesis of the architectural philosophy gestated in England after the war, despite the extensive time interval that characterized its construction process. On the other hand, it must be considered the simplicity of the constructive language used in this project. It is given by the complex projective repetition of the type systems and by the establishment of a quasi-mathematical grammar. The systematization of its vocabulary makes, after a deep analysis of its architecture, to recognize new parameters able to document this moment in the history of English architecture. The building envelope is, at the same time, facade and structure. This feature has been overlooked when many photographs of the finished work and its drawings -made by the Smithsons during the design phase- has been exposed over six decades. As a result, it has proliferated the knowledge of Hunstanton Secondary Modern School’s architecture as a more superficial level, just by showing the formal outcome of its project and thus simply been left the sensation of the great influence that Mies Van der Rohe provocated in the Smithson thinking during their first years of developing his work as architects. Therefore, the main objective of this thesis is to facilitate an understanding of the Smithsons’ proposed space. This is made possible through the detailed analysis of the different systems used in it and, by understanding the knowledge of the team involved in its construction. To prove this, it is necessary to pay attention to the study of the materials and to different project mechanisms that make possible to this group of spaces -inner and outer- be defined through the game played by two variables: an apparent austerity in the use of materials and the combination of the various participant systems through the resource of repetition. Despite the untimely interventions made in order to adapt the center to the new needs (the large increase in the number of students), Hunstanton School’s building continues proclaiming its spatial integrity. Assuming that Hunstanton Secondary School’s architecture represents the manifesto of New Brutalism in England, it is concluded that the result of its construction was the result of numerous influences that, in connection with the Smithsons, were present during the years in which its project was conceived. This meaning goes beyond the conclusions made from the architectural debate that was published in many of local architectural magazines. The compositional mechanisms employed, are also linked to what art historians had contributed to the history of architecture until then. Since the 40s, historians had undertaken a new way to tell History. This new mode strongly implied its critical capacity. All this, was causing interferences in the mentality of the architects of the new generation and, giving them a subliminally determined and very subjective cultural background. Of course, the final architectural result had much to do with the material resources available at that time and, with its optimization through the adoption of new working methods as the multidisciplinary organization. The inclusion of engineer Ronald Jenkins in the team of the Smithsons was a great opportunity. He proposed to implement the new Plastic Theory in the structural calculation and thereby he got enrich the spatial results achieved, by enabling the perception of a lightweight construction, despite its large size and, linked to the landscape where it is inserted. But all these conditions were passed through the filter of social regeneration’s desire, following the American society’s model. This American model travelled to Europe in the hands of advertising. And, in the same way that publicity had something to do with the creative process of this architecture, also had a lot to do the knowledge of pop art and its compositional resources.