Reverse logistics practices for recovering mobile phones in Spain

The main objective of this article is to characterize the reverse logistics system for mobile phones in Spain. The study includes the characterization of the different actors involved in the reverse logistics system and the description of the most common logistics practices in the sector. We will also opose alternative practices for managing this complex reverse logistics system and finally, we analyse the challenges of the current reverse logistics model. Some alternatives for the current model are location of reception points for end-of-use mobiles, the need to legislate the secondhand mobile phone market, and the location of the necessary recycling centres according to current legislation.

Reverse logistics systems for waste generated throughout vehicles life-cycle

Waste produced during the service life of automobiles has received much less attention than end-of-life vehicles themselves. In this paper, we deal with the set up of a reverse logistics system for the collection and treatment of use-phase residues. First, the type of waste arising during vehicles? service life is characterized. Data were collected in collaboration with SIGRAUTO, the product stewardship organization in charge of vehicles? recovery in Spain. Next, three organizational models are proposed. The three alternatives are benchmarked and assessed from a double organizational and operational perspective for the particular case of the Madrid region in Spain

Outsourcing and acquisition models comparison related to IT supplier selection decision analysis

This paper presents a comparison of acquisition models related to decision analysis of IT supplier selection. The main standards are: Capability Maturity Model Integration for Acquisition (CMMI-ACQ), ISO / IEC 12207 Information Technology / Software Life Cycle Processes, IEEE 1062 Recommended Practice for Software Acquisition, the IT Infrastructure Library (ITIL) and the Project Management Body of Knowledge (PMBOK) guide. The objective of this paper is to compare the previous models to find the advantages and disadvantages of them for the future development of a decision model for IT supplier selection.

Outsourcing: un proceso para mejorar la competitividad

Analiza el outsourcing como factor clave para la competitividad

Robustness and Recoverability in Transport Logistics

Abstract Transport is the foundation of any economy: it boosts economic growth, creates wealth, enhances trade, geographical accessibility and the mobility of people. Transport is also a key ingredient for a high quality of life, making places accessible and bringing people together. The future prosperity of our world will depend on the ability of all of its regions to remain fully and competitively integrated in the world economy. Efficient transport is vital in making this happen. Operations research can help in efficiently planning the design and operating transport systems. Planning and operational processes are fields that are rich in combinatorial optimization problems. These problems can be analyzed and solved through the application of mathematical models and optimization techniques, which may lead to an improvement in the performance of the transport system, as well as to a reduction in the time required for solving these problems. The latter aspect is important, because it increases the flexibility of the system: the system can adapt in a faster way to changes in the environment (i.e.: weather conditions, crew illness, failures, etc.). These disturbing changes (called disruptions) often enforce the schedule to be adapted. The direct consequences are delays and cancellations, implying many schedule adjustments and huge costs. Consequently, robust schedules and recovery plans must be developed in order to fight against disruptions. This dissertation makes contributions to two different fields: rail and air applications. Robust planning and recovery methods are presented. In the field of railway transport we develop several mathematical models which answer to RENFE’s (the major railway operator in Spain) needs: 1. We study the rolling stock assignment problem: here, we introduce some robust aspects in order to ameliorate some operations which are likely to fail. Once the rolling stock assignment is known, we propose a robust routing model which aims at identifying the train units’ sequences while minimizing the expected delays and human resources needed to perform the sequences. 2. It is widely accepted that the sequential solving approach produces solutions that are not global optima. Therefore, we develop an integrated and robust model to determine the train schedule and rolling stock assignment. We also propose an integrated model to study the rolling stock circulations. Circulations are determined by the rolling stock assignment and routing of the train units. 3. Although our aim is to develop robust plans, disruptions will be likely to occur and recovery methods will be needed. Therefore, we propose a recovery method which aims to recover the train schedule and rolling stock assignment in an integrated fashion all while considering the passenger demand. In the field of air transport we develop several mathematical models which answer to IBERIA’s (the major airline in Spain) needs: 1. We look at the airline-scheduling problem and develop an integrated approach that optimizes schedule design, fleet assignment and passenger use so as to reduce costs and create fewer incompatibilities between decisions. Robust itineraries are created to ameliorate misconnected passengers. 2. Air transport operators are continuously facing competition from other air operators and different modes of transport (e.g., High Speed Rail). Consequently, airline profitability is critically influenced by the airline’s ability to estimate passenger demands and construct profitable flight schedules. We consider multi-modal competition including airline and rail, and develop a new approach that estimates the demand associated with a given schedule; and generates airline schedules and fleet assignments using an integrated schedule design and fleet assignment optimization model that captures the impacts of schedule decisions on passenger demand.

Increasing the accuracy of positive displacement meters for the measurement of volume in liquid hydrocarbon logistics

Accuracy in the liquid hydrocarbons custody transfer is mandatory because it has a great economic impact. By far the most accurate meter is the positive displacement (PD) meter. Increasing such an accuracy may adversely affect the cost of the custody transfer, unless simple models are developed in order to lower the cost, which is the purpose of this work. PD meter consists of a fixed volume rotating chamber. For each turn a pulse is counted, hence, the measured volume is the number of pulses times the volume of the chamber. It does not coincide with the real volume, so corrections have to be made. All the corrections are grouped by a meter factor. Among corrections highlights the slippage flow. By solving the Navier-Stokes equations one can find an analytical expression for this flow. It is neither easy nor cheap to apply straightforward the slippage correction; therefore we have made a simple model where slippage is regarded as a single parameter with dimension of time. The model has been tested for several PD meters. In our careful experiments, the meter factor grows with temperature at a constant pace of 8?10?5?ºC?1. Be warned

¿Necesitan los proveedores de servicios de outsourcing una metodología para provisión de servicios?

El mercado de outsourcing ha estado creciendo en los últimos años y se prevé que lo siga haciendo en los próximos, pero este crecimiento ha estado limitado por el fracaso de muchos proyectos que, en algunos casos, han llevado a las organizaciones a asumir de nuevo esos servicios (insourcing). Estos fracasos se han debido en gran parte a los problemas con los proveedores: falta de experiencia, de capacidades para asumir los proyectos, dificultad en la comunicación. Así como hay marcos de buenas prácticas para la gestión de los proyectos de outsourcing para los clientes, no ocurre lo mismo con los proveedores, que basan la provisión de los servicios en sus experiencias anteriores y en sus capacidades técnicas. El objetivo de este artículo es demostrar la necesidad de proponer una metodología que guíe a los proveedores durante todo el ciclo de vida un proyecto de outsourcing y que facilite la provisión de servicios de calidad y bien gestionados. ABSTRACT. The outsourcing market has been growing in recent years and it is expected to keep doing it, but this growth has been limited by the failure of many projects. These failures have been due to a major degree to problems with providers: lack of experience and capacity to take on the projects and difficult communication. There are good practices frameworks for managing outsourcing projects for clients, but it is not the same for providers, who base the provision of services on their past experience and technical capabilities. The aim of this paper is to state the need to propose a methodology that guides providers throughout the whole outsourcing life cycle and facilitates the provision of quality services and their management.

Propuesta de una metodología para gestión de proyectos de outsourcing de TI para proveedores

Los avances tecnológicos actuales que han llevado a una economía globalmente conectada, junto con la creciente tendencia hacia la privatización, globalización y desregulación están dando lugar a nuevos modelos organizativos y a un aumento de la colaboración entre proveedores y clientes, compartiendo información y flujos de proceso. Todo ello ha contribuido directamente a la gran expansión del outsourcing y a que se considere como una herramienta estratégica para las organizaciones. En este entorno y dada la creciente complejidad organizativa, el uso de una metodología para ayudar a la implantación de proyectos de outsourcing se ha convertido en algo casi necesario. En los últimos años se han propuesto algunas metodologías, especialmente para apoyo de las organizaciones cliente de outsourcing, pero no consideramos que sean completas en cuanto a contemplar todos los aspectos necesarios para guiar un proyecto de outsourcing. Es por ello que, en este artículo, proponemos una metodología para gestión de proyectos de outsourcing de TI desde el punto de vista del proveedor que sea completa y fácil de aplicar. Abstract -. Current technological advances that have led to a globally connected economy, together with the increasing trend towards privatization and deregulation, are leading to new organizational models and increased collaboration between suppliers and customers, sharing information and process flows. This has directly contributed to the great expansion of outsourcing, considering it as a strategic tool for organizations. In this environment, and given the increasing organizational complexity, the use of a methodology to assist the implementation of outsourcing projects has become almost necessary. In recent years several methodologies and models have been proposed, especially for supporting client outsourcing organizations, but we do not consider them to be complete, they do not cover all necessary aspects to manage an outsourcing project. That is the reason because we, in this paper, propose a methodology for outsourcing project management from the point of view of the suppliers that was complete and easy to apply.

¿Necesitan los proveedores de outsourcing una metodología para la provisión de servicios?

El mercado de outsourcing ha estado creciendo en los últimos años y se espera que lo siga haciendo, pero este crecimiento se ha visto limitado por el fracaso de muchos proyectos. Estos fracasos se han debido en gran parte a los problemas con los proveedores: la falta de experiencia y capacidad para asumir los proyectos, y una comunicación difícil. Se han propuesto marcos de buenas prácticas para la gestión de proyectos de outsourcing desde el punto de vista del cliente, pero no ha sido así para los proveedores, que basan la prestación de servicios en su experiencia pasada y sus capacidades técnicas. El objetivo de este trabajo es establecer la necesidad de proponer una metodología que guíe a los proveedores a lo largo de todo el ciclo de vida del outsourcing y facilite la provisión de servicios de calidad y bien gestionados. ABSTRACT. The outsourcing market has been growing in recent years and it is expected to keep doing it, but this growth has been limited by the failure of many projects. These failures have been due to a major degree to problems with providers: lack of experience and capacity to take on the projects and difficult communication. There are good practices frameworks for managing outsourcing projects for clients, but it is not the same for providers, who base the provision of services on their past experience and technical capabilities. The aim of this paper is to state the need to propose a methodology that guides providers throughout the whole outsourcing life cycle and facilitates the provision of quality services and their management.

Propuesta de una metodología para provisión de servicios de outsourcing de TI

El mercado de outsourcing ha estado creciendo en los últimos años y se prevé que lo siga haciendo en los próximos, pero este crecimiento ha estado limitado por el fracaso de muchos proyectos que, en algunos casos, han llevado a las organizaciones a asumir de nuevo esos servicios (insourcing). Estos fracasos se han debido en gran parte a los problemas con los proveedores: falta de experiencia, de capacidades para asumir los proyectos, dificultad en la comunicación,… A diferencia de lo que ocurre en otras disciplinas, no existe una metodología que ayude, tanto a los clientes como a los proveedores de servicios de outsourcing de TI, a gobernar y gestionar sus proyectos y conseguir los resultados buscados. En los últimos años han aparecido, al mismo tiempo que la expansión del outsourcing, algunos modelos y marcos de buenas prácticas para la gestión de los proyectos de outsourcing, pero generalmente sólo cubren algunos aspectos de la gestión. No se los puede considerar metodologías, porque no definen roles, responsabilidades ni entregables. Por lo general, son el resultado de la experiencia en la gestión de otros tipos de proyectos. Hay que considerar también que, excepto eSCM-SP, que es un modelo de buenas prácticas para mejorar la capacidad en la provisión de servicios, están todos orientados al cliente. El objetivo de esta tesis es, por un lado, demostrar la necesidad de contar con una metodología que guíe a los proveedores durante todo el ciclo de vida un proyecto de outsourcing y, por otro, proponer una metodología que contemple desde la fase inicial de la búsqueda de oportunidades de negocio, evaluación de las propuestas RFP, la decisión de hacer una oferta o no para la prestación de servicios, la participación en la due diligence, la firma del contrato, la transición y la entrega de servicios, hasta la finalización del contrato. La metodología se ha organizado en base a un ciclo de vida del outsourcing de cinco etapas, definiendo para cada una de ellas los roles que participan y las responsabilidades que deberán asumir, las actividades a realizar y los entregables que se deberán generar, y que servirán de elementos de control tanto para la gestión del proyecto como para la provisión del servicio. La validación de la metodología se ha realizado aplicándola en proyectos de provisión de servicios de TI de una mediana empresa española y comparando los resultados obtenidos con los conseguidos en proyectos anteriores. ABSTRACT The outsourcing market has been growing in recent years and it is expected to keep doing so in the coming years, but this growth has been limited by the failure of many projects that, in some cases, has led organizations to take back those services (insourcing). These failures have been due to a major degree to problems with providers: lack of experience and capacity to take on the projects, and difficulties of communication. Unlike what happens in other disciplines, there is no methodology for helping both customers and providers of outsourcing services. In recent years, some good practice frameworks have also appeared at the same time as the expansion of outsourcing. They are not methodologies because they have not defined any roles, responsibilities and deliverables. These frameworks aim to help organizations to be successful at managing and governing outsourcing projects. They are usually the result of their experience in managing other kinds of projects. In consequence, it is not appropriate to name them "methodologies" for managing outsourcing projects and much less "standards". It is also important to note that all existing good practice frameworks, except eSCM-SP, are client-oriented. The aim of this thesis is to state the need to propose a methodology that guides providers throughout the whole outsourcing life cycle and facilitates the provision of quality services and their management, and the proposal of a methodology in which the stages, activities, deliverables, roles and responsibilities are clearly defined. The proposed methodology cover all the stages of the outsourcing life cycle, from the early stage of searching for business opportunities, evaluation of the RFP proposals, the decision to bid or not to bid for the service provision, participation in the due diligence if necessary, the signing of the contract, the transition and delivery of service to the termination of the contract. For each activity, roles, responsibilities and deliverables have been defined. The validation of the methodology has been done by applying it in the provision of some outsourcing projects carried out by a Spanish IT medium company and comparing the results with those obtained in previous projects.

Methodology for developing and application outsourcing in the cloud using SOA

New technologies such as, the new Information and Communication Technology ICT, break new paths and redefines the way we understand business, the Cloud Computing is one of them. The on demand resource gathering and the per usage payment scheme are now commonplace, and allows companies to save on their ICT investments. Despite the importance of this issue, we still lack methodologies that help companies, to develop applications oriented for its exploitation in the Cloud. In this study we aim to fill this gap and propose a methodology for the development of ICT applications, which are directed towards a business model, and further outsourcing in the Cloud. In the former the Development of SOA applications, we take, as a baseline scenario, a business model from which to obtain a business process model. To this end, we use software engineering tools; and in the latter The Outsourcing we propose a guide that would facilitate uploading business models into the Cloud; to this end we describe a SOA governance model, which controls the SOA. Additionally we propose a Cloud government that integrates Service Level Agreements SLAs, plus SOA governance, and Cloud architecture. Finally we apply our methodology in an example illustrating our proposal. We believe that our proposal can be used as a guide/pattern for the development of business applications.

A framework for implementing outsourcing schemes

En esta tesis se aborda el problema de la externalización segura de servicios de datos y computación. El escenario de interés es aquel en el que el usuario posee datos y quiere subcontratar un servidor en la nube (“Cloud”). Además, el usuario puede querer también delegar el cálculo de un subconjunto de sus datos al servidor. Se presentan dos aspectos de seguridad relacionados con este escenario, en concreto, la integridad y la privacidad y se analizan las posibles soluciones a dichas cuestiones, aprovechando herramientas criptográficas avanzadas, como el Autentificador de Mensajes Homomórfico (“Homomorphic Message Authenticators”) y el Cifrado Totalmente Homomórfico (“Fully Homomorphic Encryption”). La contribución de este trabajo es tanto teórica como práctica. Desde el punto de vista de la contribución teórica, se define un nuevo esquema de externalización (en lo siguiente, denominado con su término inglés Outsourcing), usando como punto de partida los artículos de [3] y [12], con el objetivo de realizar un modelo muy genérico y flexible que podría emplearse para representar varios esquemas de ”outsourcing” seguro. Dicho modelo puede utilizarse para representar esquemas de “outsourcing” seguro proporcionando únicamente integridad, únicamente privacidad o, curiosamente, integridad con privacidad. Utilizando este nuevo modelo también se redefine un esquema altamente eficiente, construido en [12] y que se ha denominado Outsourcinglin. Este esquema permite calcular polinomios multivariados de grado 1 sobre el anillo Z2k . Desde el punto de vista de la contribución práctica, se ha construido una infraestructura marco (“Framework”) para aplicar el esquema de “outsourcing”. Seguidamente, se ha testado dicho “Framework” con varias implementaciones, en concreto la implementación del criptosistema Joye-Libert ([18]) y la implementación del esquema propio Outsourcinglin. En el contexto de este trabajo práctico, la tesis también ha dado lugar a algunas contribuciones innovadoras: el diseño y la implementación de un nuevo algoritmo de descifrado para el esquema de cifrado Joye-Libert, en colaboración con Darío Fiore. Presenta un mejor comportamiento frente a los algoritmos propuestos por los autores de [18];la implementación de la función eficiente pseudo-aleatoria de forma amortizada cerrada (“amortized-closed-form efficient pseudorandom function”) de [12]. Esta función no se había implementado con anterioridad y no supone un problema trivial, por lo que este trabajo puede llegar a ser útil en otros contextos. Finalmente se han usado las implementaciones durante varias pruebas para medir tiempos de ejecución de los principales algoritmos.---ABSTRACT---In this thesis we tackle the problem of secure outsourcing of data and computation. The scenario we are interested in is that in which a user owns some data and wants to “outsource” it to a Cloud server. Furthermore, the user may want also to delegate the computation over a subset of its data to the server. We present the security issues related to this scenario, namely integrity and privacy and we analyse some possible solutions to these two issues, exploiting advanced cryptographic tools, such as Homomorphic Message Authenticators and Fully Homomorphic Encryption. Our contribution is both theoretical and practical. Considering our theoretical contribution, using as starting points the articles of [3] and [12], we introduce a new cryptographic primitive, called Outsourcing with the aim of realizing a very generic and flexible model that might be employed to represent several secure outsourcing schemes. Such model can be used to represent secure outsourcing schemes that provide only integrity, only privacy or, interestingly, integrity with privacy. Using our new model we also re-define an highly efficient scheme constructed in [12], that we called Outsourcinglin and that is a scheme for computing multi-variate polynomials of degree 1 over the ring Z2k. Considering our practical contribution, we build a Framework to implement the Outsourcing scheme. Then, we test such Framework to realize several implementations, specifically the implementation of the Joye-Libert cryptosystem ([18]) and the implementation of our Outsourcinglin scheme. In the context of this practical work, the thesis also led to some novel contributions: the design and the implementation, in collaboration with Dario Fiore, of a new decryption algorithm for the Joye-Libert encryption scheme, that performs better than the algorithms proposed by the authors in [18]; the implementation of the amortized-closed-form efficient pseudorandom function of [12]. There was no prior implementation of this function and it represented a non trivial work, which can become useful in other contexts. Finally we test the implementations to execute several experiments for measuring the timing performances of the main algorithms.