Water harvesting for young trees using Peltier plates powered by photovoltaic solar energy

Young trees transplanted from nursery into open field require a minimum amount of soil moisture to successfully root in their new location, especially in dry-climate areas. One possibility is to obtain the required water from air moisture. This can be achieved by reducing the temperature of a surface below the air dew point temperature, inducing water vapor condensation on the surface. The temperature of a surface can be reduced by applying the thermoelectric effect, with Peltier modules powered by electricity. Here, we present a system that generates electricity with a solar photovoltaic module, stores it in a battery, and finally, it uses the electricity at the moment in which air humidity and temperature are optima to maximize water condensation while minimizing energy consumption. Also, a method to reduce the evaporation of the condensed water is proposed. The objective of the system, rather than irrigating young plants in such a degree as to boost their growth, is to maintain them alive in the dryer periods.

Water harvesting for young trees using Peltier modules powered by photovoltaic solar energy

Young trees transplanted from nursery into open field require a minimum amount of soil moisture to successfully root in their new location, especially in dry-climate areas. One possibility is to obtain the required water from air moisture. This can be achieved by reducing the temperature of a surface below the air dew point temperature, inducing water vapor condensation on the surface. The temperature of a surface can be reduced by applying the thermoelectric effect, with Peltier modules powered by electricity. Here, we present a system that generates electricity with a solar photovoltaic module, stores it in a battery, and finally, uses the electricity at the moment in which air humidity and temperature are optimal to maximize water condensation while minimizing energy consumption. Also, a method to reduce the evaporation of the condensed water is proposed. The objective of the system is to sustain young plants in drier periods, rather than exclusively irrigating young plants to boost their growth.

Diseño e implementación de un módulo para la anotación de imágenes médicas

Se comenzó el trabajo recabando información sobre los distintos enfoques que se le había dado a la anotación a lo largo del tiempo, desde anotación de imágenes a mano, pasando por anotación de imágenes utilizando características de bajo nivel, como color y textura, hasta la anotación automática. Tras entrar en materia, se procedió a estudiar artículos relativos a los diferentes algoritmos utilizados para la anotación automática de imágenes. Dado que la anotación automática es un campo bastante abierto, hay un gran numero de enfoques. Teniendo las características de las imágenes en particular en las que se iba a centrar el proyecto, se fueron descartando los poco idoneos, bien por un coste computacional elevado, o porque estaba centrado en un tipo diferente de imágenes, entre otras cosas. Finalmente, se encontró un algoritmo basado en formas (Active Shape Model) que se consideró que podría funcionar adecuadamente. Básicamente, los diferentes objetos de la imagen son identicados a partir de un contorno base generado a partir de imágenes de muestra, siendo modicado automáticamente para cubrir la zona deseada. Dado que las imágenes usadas son todas muy similares en composición, se cree que puede funcionar bien. Se partió de una implementación del algoritmo programada en MATLAB. Para empezar, se obtuvieron una serie de radiografías del tórax ya anotadas. Las imágenes contenían datos de contorno para ambos pulmones, las dos clavículas y el corazón. El primer paso fue la creación de una serie de scripts en MATLAB que permitieran: - Leer y transformar las imágenes recibidas en RAW, para adaptarlas al tamaño y la posición de los contornos anotados - Leer los archivos de texto con los datos de los puntos del contorno y transformarlos en variables de MATLAB - Unir la imagen transformada con los puntos y guardarla en un formato que la implementación del algoritmo entendiera. Tras conseguir los ficheros necesarios, se procedió a crear un modelo para cada órgano utilizando para el entrenamiento una pequeña parte de las imágenes. El modelo obtenido se probó con varias imágenes de las restantes. Sin embargo, se encontro bastante variación dependiendo de la imagen utilizada y el órgano detectado. ---ABSTRACT---The project was started by procuring information about the diferent approaches to image annotation over time, from manual image anotation to automatic annotation. The next step was to study several articles about the diferent algorithms used for automatic image annotation. Given that automatic annotation is an open field, there is a great number of approaches. Taking into account the features of the images that would be used, the less suitable algorithms were rejected. Eventually, a shape-based algorithm (Active Shape Model) was found. Basically, the diferent objects in the image are identified from a base contour, which is generated from training images. Then this contour is automatically modified to cover the desired area. Given that all the images that would be used are similar in object placement, the algorithm would probably work nicely. The work started from a MATLAB implementation of the algorithm. To begin with, a set of chest radiographs already annotated were obtained. These images came with contour data for both lungs, both clavicles and the heart. The first step was the creation of a series of MATLAB scripts to join the RAW images with the annotation data and transform them into a format that the algorithm could read. After obtaining the necessary files, a model for each organ was created using part of the images for training. The trained model was tested on several of the reimaining images. However, there was much variation in the results from one image to another. Generally, lungs were detected pretty accurately, whereas clavicles and the heart gave more problems. To improve the method, a new model was trained using half of the available images. With this model, a significant inprovement of the results can be seen.

Aeroacoustic noise prediction in high speed trains due to attached and detached flow

This paper aims to set out the influence of the flow field around high speed trains in open field. To achieve this parametric analysis of the sound pressure inside the train was performed. Three vibroacoustic models of a characteristic train section are used to predict the noise inside the train in open field by using finite element method FEM, boundary element method (BEM) and statistical energy analysis (SEA) depending on the frequency range of analysis. The turbulent boundary layer excitation is implemented as the only airborne noise source, in order to focus on the study of the attached and detached flow in the surface of the train. The power spectral densities of the pressure fluctuation in the train surface proposed by [Cockburn and Roberson 1974, Rennison et al. 2009] are applied on the exterior surface of the structural subsystems in the vibroacoustic models. An increase in the sound pressure level up to10 dB can be appreciated due to the detachment of the flow around the train. These results highlight the importance to determine the detached regions prediction, making critical the airborne noise due to turbulent boundary layer.

Vibroacoustic Problems in High Speed Trains

Passengers comfort in terms of acoustic noise levels is a key train design parameter, especially relevant in high speed trains, where the aerodynamic noise is dominant. The aim of the work, described in this paper, is to make progress in the understanding of the flow field around high speed trains in an open field, which is a subject of interest for many researchers with direct industrial applications, but also the critical configuration of the train inside a tunnel is studied in order to evaluate the external loads arising from noise sources of the train. The airborne noise coming from the wheels (wheelrail interaction), which is the dominant source at a certain range of frequencies, is also investigated from the numerical and experimental points of view. The numerical prediction of the noise in the interior of the train is a very complex problem, involving many different parameters: complex geometries and materials, different noise sources, complex interactions among those sources, broad range of frequencies where the phenomenon is important, etc. During recent years a research plan is being developed at IDR/UPM (Instituto de Microgravedad Ignacio Da Riva, Universidad Politécnica de Madrid) involving both numerical simulations, wind tunnel and full-scale tests to address this problem. Comparison of numerical simulations with experimental data is a key factor in this process.

An open-source simulation tool of grid-connected PV systems.

This paper will present an open-source simulation tool, which is being developed in the frame of an European research project1. The tool, whose final version will be freely available through a website, allows the modelling and the design of different types of grid-connected PV systems, such as large grid-connected plants and building-integrated installations. The tool is based on previous software developed by the IES-UPM2, whose models and energy losses scenarios have been validated in the commissioning of PV projects3 carried out in Spain, Portugal, France and Italy, whose aggregated capacity is nearly 300MW. This link between design and commissioning is one of the key points of tool presented here, which is not usually addressed by present commercial software. The tool provides, among other simulation results, the energy yield, the analysis and breakdown of energy losses, and the estimations of financial returns adapted to the legal and financial frameworks of each European country. Besides, educational facilities will be developed and integrated in the tool, not only devoted to learn how to use this software, but also to train the users on the best design PV systems practices. The tool will also include the recommendation of several PV community experts, which have been invited to identify present necessities in the field of PV systems simulation. For example, the possibility of using meteorological forecasts as input data, or modelling the integration of large energy storage systems, such as vanadium redox or lithium-ion batteries. Finally, it is worth mentioning that during the verification and testing stages of this software development, it will be also open to the suggestions received from the different actors of the PV community, such as promoters, installers, consultants, etc.

Crowdsourcing de información geográfica: proyectos Open Source y desarrollo de una plataforma móvil para mantenimiento de infraestructura urbana.

El presente trabajo se centra en la investigación del modelo de crowdsourcing y su relación con la Información Geográfica Voluntaria y otras actividades participativas para la creación de conocimiento geográfico de forma colaborativa. Primero se expone una introducción al concepto y distintos ámbitos de aplicación y uso en la adquisición,visualización y análisis de datos geográficos, presentándose las herramientas, tecnologías web y móviles que han hecho posible su implementación. Después se hace una breve revisión de algunas plataformas de código abierto que faciliten la creación de contenido geolocalizado por el usuario y proporcionen funcionalidades para el análisis básico y manipulación de información mediante la implementación de estrategias de crowdsourcing. En los apartados siguientes, se hace un breve análisis de requisitos para el caso de uso específico de una aplicación móvil de crowdsourcing para el mantenimiento urbano, sirviendo este, como base en el desarrollo de una plataforma Web-móvil que facilite la gestión de este tipo de infraestructura. El diseño de la plataforma propuesta permite consultar y actualizar información por medio de etiquetas NFC (Near Field Communications o comunicación de campo cercano) utilizadas en el mobiliario urbano inventariado y empleando dispositivos inteligentes habilitados con la misma tecnología y conexión a Internet, para dar seguimiento y reportar el estado de la infraestructura. También, es posible generar reportes geolocalizados sobre problemas en instalaciones urbanas no inventariadas, así como crear eventos geolocalizados que convoquen a tareas participativas para la mejora de la ciudad. Además, integra entradas de conversación de redes sociales para contribuir a la participación activa de los ciudadanos en la vigilancia y mantenimiento urbano. Por último, el trabajo presenta algunas conclusiones y líneas futuras.

On the acquisition of high-resolution maps with open source software and commercials off-the-shelf quad-rotors

Mosaics are high-resolution images obtained aerially and employed in several scientific research areas, such for example, in the field of environmental monitoring and precision agriculture. Although many high resolution maps are obtained by commercial demand, they can also be acquired with commercial aerial vehicles which provide more experimental autonomy and availability. For what regard to mosaicing-based aerial mission planners, there are not so many - if any - free of charge software. Therefore, in this paper is presented a framework designed with open source tools and libraries as an alternative to commercial tools to carry out mosaicing tasks.

Global instability analysis and control of three-dimensional long open cavity flow

The three-dimensional wall-bounded open cavity may be considered as a simplified geometry found in industrial applications such as leading gear or slotted flats on the airplane. Understanding the three-dimensional complex flow structure that surrounds this particular geometry is therefore of major industrial interest. At the light of the remarkable former investigations in this kind of flows, enough evidences suggest that the lateral walls have a great influence on the flow features and hence on their instability modes. Nevertheless, even though there is a large body of literature on cavity flows, most of them are based on the assumption that the flow is two-dimensional and spanwise-periodic. The flow over realistic open cavity should be considered. This thesis presents an investigation of three-dimensional wall-bounded open cavity with geometric ratio 6:2:1. To this aim, three-dimensional Direct Numerical Simulation (DNS) and global linear instability have been performed. Linear instability analysis reveals that the onset of the first instability in this open cavity is around Recr 1080. The three-dimensional shear layer mode with a complex structure is shown to be the most unstable mode. I t is noteworthy that the flow pattern of this high-frequency shear layer mode is similar to the observed unstable oscillations in supercritical unstable case. DNS of the cavity flow carried out at different Reynolds number from steady state until a nonlinear saturated state is obtained. The comparison of time histories of kinetic energy presents a clearly dominant energetic mode which shifts between low-frequency and highfrequency oscillation. A complete flow patterns from subcritical cases to supercritical case has been put in evidence. The flow structure at the supercritical case Re=1100 resembles typical wake-shedding instability oscillations with a lateral motion existed in the subcritical cases. Also, This flow pattern is similar to the observations in experiments. In order to validate the linear instability analysis results, the topology of the composite flow fields reconstructed by linear superposition of a three-dimensional base flow and its leading three-dimensional global eigenmodes has been studied. The instantaneous wall streamlines of those composited flows display distinguish influence region of each eigenmode. Attention has been focused on the leading high-frequency shear layer mode; the composite flow fields have been fully recognized with respect to the downstream wave shedding. The three-dimensional shear layer mode is shown to give rise to a typical wake-shedding instability with a lateral motions occurring downstream which is in good agreement with the experiment results. Moreover, the spanwise-periodic, open cavity with the same length to depth ratio has been also studied. The most unstable linear mode is different from the real three-dimensional cavity flow, because of the existence of the side walls. Structure sensitivity of the unstable global mode is analyzed in the flow control context. The adjoint-based sensitivity analysis has been employed to localized the receptivity region, where the flow is more sensible to momentum forcing and mass injection. Because of the non-normality of the linearized Navier-Stokes equations, the direct and adjoint field has a large spatial separation. The strongest sensitivity region is locate in the upstream lip of the three-dimensional cavity. This numerical finding is in agreement with experimental observations. Finally, a prototype of passive flow control strategy is applied.

Soundscape quality analysis by fuzzy logic: A field study in Cordoba, Argentina

This research studies urban soundscapes through the comparative analysis of twelve public open spaces in the city of Córdoba (Argentina), taken as case studies. The work aims to examine selection of indicators and assessment tools intended to characterize soundscape quality. The field study was carried out through surveys and acoustic and psychoacoustic indicators, that are used together to objectively describe the sound quality of urban spaces. The study shows that, while there is a relationship of these indicators with the sound quality of the spaces, this is not linear. Their relative importance or influence depends on the interrelations occurring between the parameters studied. A model analyzing and correlating the parameters with the sound quality, based on the postulates of fuzzy logic, was applied as a tool of analysis, and it was seen to achieve a very close approximation to the subjective or perceptual response of the inhabitants. This close match between the model results and the perceptual response of the users confirms the fuzzy model as an effective tool for the study, not only of soundscapes, but also for those situations in which objective parameters must be related to the perceptual response of users.