Effect of the season on the free phytoprostanes content in Cornicabra extra virgin olive oil from deficit irrigated olive trees

BACKGROUND: The effect of regulated deficit irrigation (RDI) on the phytoprostane (PhytoP) content in extra virgin olive (Olea europaea L., cv. Cornicabra) oil (EVOO) was studied. During the 2012 and 2013 seasons, T0 plants were irrigated at 100% ETc, while T1 and T2 plants were irrigated avoiding water deficit during phases I and III of fruit growth and saving water during the non-critical phenological period of pit hardening (phase II), developing amore severewater deficit in T2 plants. In 2013, a fourth treatment (T3) was also performed, which was similar to T2 except that water saving was from the beginning of phase II to 15 days after the end of phase II. RESULTS: 9-F1t-PhytoP, 9-epi-9-F1t-PhytoP, 9-epi-9-D1t-PhytoP, 9-D1t-PhytoP, 16-B1-PhytoP and 9-L1-PhytoP were present in Cornicabra EVOO, and their contents increased in the EVOO fromRDI plants. CONCLUSION: Deficit irrigation during pit hardening or for a further period of 2 weeks thereafter to increase irrigation water saving is clearly critical for EVOO composition because of the enhancement of free PhytoPs, which have potential beneficial effects on human health. The response of individual free PhytoPs to changes in plant water status was not as perceptible as expected, preventing their use as biomarkers of water stress.

Canopy fruit location can affect olive oil quality in Arbequina hedgerow orchards

The effect of location of fruit in canopies of hedgerow olive trees (Olea europaea L., cv. ‘Arbequina’) on quality of virgin oil was tested by analyzing oils extracted from different height layers and faces of 9 olive hedgerows (6 North-South oriented and 3 East-West). Although sensory attributes were not different other oil quality parameters may be significantly modified by fruit position. In some hedgerows, oils extracted from fruits harvested from higher layers exhibited significantly higher stability against oxidation, along with higher palmitic acid, linoleic acid and phenol contents, but lower oleic acid content. Oils extracted from fruits harvested from East and North facing hedgerows oriented North-South and East-West, respectively, exhibited higher oleic contents and lower saturated and polyunsaturated fatty acid contents. The mean phenol content of oils extracted from fruits from a North-South oriented hedgerow was significantly greater from one of the East-West oriented hedgerows. These findings may be relevant for the design of future olive hedgerows destined for olive oil production.

Influence of climate change on the flowering of temperate fruit trees

It is well known that winter chilling is necessary for the flowering of temperate trees. The chilling requirement is a criterion for choosing a species or variety at a given location. Also chemistry products can be used for reducing the chilling-hours needs but make our production more expensive. This study first analysed the observed values of chilling hours for some representative agricultural locations in Spain for the last three decades and their projected changes under climate change scenarios. Usually the chilling is measured and calculated as chilling-hours, and different methods have been used to calculate them (e.g. Richarson et al., 1974 among others) according to the species considered. For our objective North Carolina method (Shaltout and Unrath, 1983) was applied for apples, Utah method (Richardson et al. 1974) for peach and grapevine and the approach used by De Melo-Abreu et al. (2004) for olive trees. The influence of climate change in temperate trees was studied by calculating projections of chilling-hours with climate data from Regional Climate Models (RCMs) at high resolution (25 km) from the European Project ENSEMBLES (http://www.ensembles-eu.org/). These projections will allow for analysing the modelled variations of chill-hours between 2nd half of 20C and 1st half of 21C at the study locations.

Canopy fruit location can affect olive oil quality in Arbequina hedgerow orchards.

The effect of location of fruit in canopies of hedgerow olive trees (Olea europaea L., cv. ‘Arbequina’) on quality of virgin oil was tested by analyzing oils extracted from different height layers and faces of nine olive hedgerows (6 North–South oriented and 3 East– West). Although sensory attributes were not different, other oil quality parameters may be significantly modified by fruit position. Oils extracted from fruits harvested from higher layers exhibited significantly higher stability against oxidation, along with higher palmitic acid, linoleic acid and phenol contents, but lower oleic acid content. Oils extracted from fruits harvested from East and North facing hedgerows oriented North–South and East–West, respectively, exhibited higher oleic contents and lower saturated and polyunsaturated fatty acid contents. The mean phenol content of oils extracted from fruits from a North–South oriented hedgerow was significantly greater from one of the East–West oriented hedgerows. These findings may be relevant for the design of future olive hedgerows destined for olive oil production.

FMECA application to Rainfall Hazard prevention

This paper presents a System Safety application to reduce the economical impact hazards in growings produced by Rainfall. System Safety is an engineering subdiscipline oriented to identify and mitigate the possible hazards to a system under study. Inside the System Safety area, the FMECA (Failure Mode, Effects and Criticallity Analysis) is a popular tool to analyze and identify the failures and weaknesses points of any system. Basically, it consist on identifying systematically the failure modes of a system to mitigate them as much as possible. The idea is to study three different kind of growings (stone fruits in the south of Spain, wheat production in Castilla Leon and Olive trees production in Andalucia) using this methodology in order to identify all the hazardous situations produced by rainfall. Applying the state of the art weather forecast techniques, this information would help farmers to prevent and mitigate the identified hazardous situations. The aim of the work is to prevent the economical hazards as are defined in the System Safety area: "Any real or potential condition that can cause injury, illness, or death to personnel; damage to or loss of a system, equipment or property; or damage to the environment", so the study is not reduced to the analysis of catastrophical situations but aboutany kind of economical damage produced by rainfall.

Energy requirements in pressure irrigation systems

Modernization of irrigation schemes, generally understood as transformation of surface irrigation systems into pressure –sprinkler and trickle- irrigation systems, aims at, among others, improving irrigation efficiency and reduction of operation and maintenance efforts made by the irrigators. However, pressure irrigation systems, in contrast, carry a serious energy cost. Energy requirements depend on decisions taken on management strategies during the operation phase, which are conditioned by previous decisions taken on the design project of the different elements which compose the irrigation system. Most of the countries where irrigation activity is significant bear in mind that modernization irrigation must play a key role in the agricultural infrastructure policies. The objective of this study is to characterize and estimate the mean and variation of the energy consumed by common types of irrigation systems and their management possibilities. The work includes all processes involved from the diversion of water into irrigation specific infrastructure to water discharge by the emitters installed on the crop fields. Simulation taking into account all elements comprising the irrigation system has been used to estimate the energy requirements of typical irrigation systems of several crop production systems. It has been applied to extensive and intensive crop systems, such us extensive winter crops, summer crops and olive trees, fruit trees and vineyards and intensive horticulture in greenhouses. The simulation of various types of irrigation systems and management strategies, in the framework imposed by particular cropping systems, would help to develop criteria for improving the energy balance in relation to the irrigation water supply productivity.

Ecotoxicology of pesticides on natural enemies of olive groves. Potential of ecdysone agonists for controlling Bactrocera oleae (Rossi) (Diptera: Tephritidae)

Pesticide applications are still one of the most common control methods against the main olive grove pests and diseases: the olive fruit fly, Bactrocera oleae (Rossi), the olive moth, Prays oleae (Bernard), the black scale, Saissetia oleae (Olivier), and the olive leaf spot, caused by the fungus Spilocaea oleagina Fries. However, and because the new pesticide legislation is aimed at an integrated pest and disease management, it is still important to evaluate and to know the ecotoxicology of pesticides on the natural enemies of the different agrosystems. A part of this work has been focusses on evaluating the direct and indirect effects of kaolin particle films and two copper-based products (Bordeaux mixture and copper oxychloride) through different laboratory, extended laboratory and semi-field experiments. Two natural enemies have been chosen: Psyttalia concolor (Szèpligeti), a parasitoid of the olive fruit fly, and Chilocorus nigritus (F.), predator of Diaspididae. This predator has been used instead of C. bipustulatus (L.), which is the species found in olive orchards. Kaolin mainly acts as a repellent of insects and/or as an oviposition deterrent. It is used in olive groves to control the olive fruit fly and the olive moth. Copper is applied against fungal and bacterial diseases. In olive groves it is used against the olive leaf spot and other diseases. No statistical differences were found in any of the experiments performed, compared to the controls, except when the oral toxicity of the products was evaluated on P. concolor females. In this case, kaolin and copper oxychloride caused a higher mortality 72 hours after the treatments, and both kaolin and the two copper formulations decreased females’ life span. Reproductive parameters were only negatively affected when kaolin was ingested. Apart from these experiments, due to the uncommon mode of action of kaolin, two extra experiments were carried out: a dual choice and a no-choice experiment. In this case, both P. concolor females and C. nigritus adults showed a clear preference for the untreated surfaces when they had the possibility of choosing between a treated surface and an untreated one. When there was no choice, no statistical differences were found between the treatments and the controls. Furthermore, the efficacy and the selectivity of three insect growth regulators (methoxyfenozide, tebufenozide and RH-5849) on B. oleae and P. concolor, respectively, have also been evaluated. In addition to laboratory experiments to evaluate the toxicity of the insecticides, also molecular approaches were used. RNA of both insects was isolated. cDNA was subsequently synthesized and the complete sequences of the ligand biding domain (LBD) of the ecdysone receptor of each insect were then determined. Afterwards the three dimensional structures of both LBDs were constructed. Finally, the docking of the insecticide molecules in the cavity delineated by the 12 α-helix that composed the LBD was performed. Both toxicity assays and molecular docking approaches showed that either methoxyfenozide or tebufenozide had no negative effects nor on B. oleae nor on P. concolor. In contrast, RH-5849 had no deleterious effect to the parasitoid but decreased olive fruit fly adults’ life span, especially when they were in contact with the fresh residue of the insecticide applied on a glass surface. The docking study of RH-5849 molecule has shown a very light hindrance with the wall of the LBD pocket. This means that this molecule could more or less adjust in the cavity. Thus, searching of new insecticides for controlling the olive fruit fly could be based on the basic lead structure of RH-5849 molecule.

The water footprint of olives and olive oil in Spain

This paper evaluates the water footprint of Spanish olives and olive oil over the period 1997-2008. In particular, it analyses the three colour components of the water footprint: green (rainwater stored in the soil), blue (surface and groundwater) and grey (freshwater required to assimilate load of pollutants). Apparent water productivity and virtual water embedded in olive oil exports have also been studied. Results show more than 99.5% of the water footprint of one liter of bottled olive oil is related to the olive production, whereas less than 0.5% is due to the other components such as bottle, cap and label. Over the studied period, the green water footprint in absolute terms of Spanish olive oil production represents about 72% in rainfed systems and just 12% in irrigated olive orchards. Blue and grey water footprints represent 6% and 10% of the national water footprint, respectively. It is shown that olive production is concentrated in regions with the smallest water footprint per unit of product. However, the increase of groundwater consumption in the main olive producing region (Andalusia), from 98 to 378 Mm3 between 1997 and 2008, has added significant pressure in the upstream Guadalquivir basin. This raises questions about the sustainability of irrigated olive orchards for export from the region. Finally, the virtual water related to olive oil exports illustrate the importance of green water footprint of rainfed olives amounting to about 77% of the total virtual water exports.

Determination of the mechanical properties of corn grains and olive fruits required in DEM simulations

Discrete element method (DEM) is a numerical technique widely used for simulating the mechanical behavior of granular materials involved in many food and agricultural industry processes. Additionally, this technique is also a powerful tool to understand many complex phenomena related to the mechanics of granular materials. However, to make use of the potential of this technique it is necessary to develop DEM models capable of representing accurately the reality. For that, among some other questions, it is essential that the values of the microscopic material properties used to define the numerical model are accurately determined.

Soil fragmentation study applying different tillage systems

Runoff generation depends on rainfall, infiltration, interception, and surface depressional storage. Surface depressional storage depends on surface microtopography, usually quantified trough soil surface roughness (SSR). SSR is subject to spatial and temporal changes that create a high variability. In an agricultural environment, tillage operations produce abrupt changes in roughness. Subsequent rainfall gradually decreases roughness. Beside it, local variation in soil properties and hydrology cause its SSR to vary spatially at different scales. The methods commonly used to measure it involve collecting point elevations in regular grids using laser profilers or scanners, digital close range stereo-photogrammetry and terrestrial laser scanning or LIDAR systems. In this case, a laser-scanning instrument was used to obtain representative digital elevation models (DEMs) at a grid resolution of 7.2x7.2mm that cover an area of 0.9x0.9m. The DEMs were obtained from two study sites with different soils. The first study site was an experimental field on which five conventional tillage methods were applied. The second study site was a large olive orchard with trees planted at 7.5x5.0m and bare soils between rows. Here, three tillage treatments were applied. In this work we have evaluated the spatial variability of SSR at several scales studying differences in height calculated from points separated by incremental distances h were raised to power values q (from 0 to 4 in steps of 0.1). The q = 2 data were studied as a semivariogram model. The logarithm of average differences plotted vs. log h were characterized by their slope, ?(q). Structure functions [?(q) vs. q] were fitted showing that data had nonlinear structure functions typical of multiscale phenomena. Comparisson of the two types of soil in their respective structure functions are shown.

Water harvesting for young trees using Peltier plates powered by photovoltaic solar energy

Young trees transplanted from nursery into open field require a minimum amount of soil moisture to successfully root in their new location, especially in dry-climate areas. One possibility is to obtain the required water from air moisture. This can be achieved by reducing the temperature of a surface below the air dew point temperature, inducing water vapor condensation on the surface. The temperature of a surface can be reduced by applying the thermoelectric effect, with Peltier modules powered by electricity. Here, we present a system that generates electricity with a solar photovoltaic module, stores it in a battery, and finally, it uses the electricity at the moment in which air humidity and temperature are optima to maximize water condensation while minimizing energy consumption. Also, a method to reduce the evaporation of the condensed water is proposed. The objective of the system, rather than irrigating young plants in such a degree as to boost their growth, is to maintain them alive in the dryer periods.

Summer deficit irrigation strategies in hedgerow olive orchard cv. ‘Arbequina’: Effect on fruit characteristics and yield.

Maximum production in hedgerow olive orchards is likely not achieved with maximum evapotranspiration over the long-term. Thus, regulated deficit irrigation (RDI) should be considered as a management option. Four irrigation treatments were evaluated during the summer when olive is most drought resistant. Control (CON) was irrigated to maintain the rootzone close to field capacity. Severe water deficit was applied by irrigating 30% CON from end of fruit drop to end July (DI-J) and from end July until beginning of oil synthesis (DI-A). Less severe water deficit was applied during July and August (DI-JA) by irrigating 50% CON. Flowering, fruiting, abscission, fruit development, fresh and dry weight of fruits, and oil production were evaluated. There were not significant differences in number of buds initiated, number of fruits per inflorescence and fruit drop. Oil production was significantly different between irrigation treatments in all experimental years. CON produced more oil and fruit with higher oil% than DI-A and DI-JA. Oil production of DI-J was not significantly reduced compared to CON and oil% was greater. DI-J was the most effective RDI strategy; with 16% less applied water relative to CON average loss in oil production of 8% was not significantly different to CON. While DI-JA saved most water (27%), oil production was reduced by 15%. Greatest loss in oil production (21%) was observed in DI-A with water saving of 22%.

Simulation of oil productivity and quality of N-S oriented olive hedgerow orchards in response to structure and interception of radiation

Simulations of oil yield and quality are presented for N–S oriented, hedgerow olive orchards of a range of structures (viz. canopy depth, canopy width, canopy slope and row spacing) using responses of yield and quality parameters to solar irradiance on canopy walls measured in a range of orchards, cv. Arbequina, in Spain. Results reveal that orchard yield of hedgerows of rectangular shape reaches a maximum when canopy depth equals alley width (row spacing−canopy width) and decreases at wider spacing, and/or with wider canopies, as the length of productive row decreases per unit area. Maximum yields for 4-m deep canopies were 2885 kg ha−1 at 1-m width and 5-m row spacing, 2400 kg ha−1 at 2-m width and 6-m spacing, and 2050 kg ha−1 at 3-m width and 7-m spacing. Illumination of canopies can be increased by applying slopes to form rhomboidal hedgerows. Substantial yield advantage can be achieved, especially for wide hedgerows, partly by closer row spacing that increases row length per unit area. By comparison, responses to latitude in the range 30–40◦ are small and do not warrant different row spacing. Oil quality parameters also respond to orchard structure. Responses are presented for oleic and palmitic acid, stability, and maturity index. Oleic acid content declines as alley spacing increases and is smaller, shallow than in wide, deep canopies. Palmitic acid content, stability, and maturity index increase with row alley spacing and are greater in narrow, shallow than in wide, deep canopies.

Olive growing in the arid valleys of Northwest Argentina (provinces of Catamarca, La Rioja and San Juan)

En este artículo se describe la situación del olivar en las provincias argentinas de Catamarca, La Rioja y San Juan.

Growth data from a field trial of Quercus suber plants regenerated from selected trees and their half-sib progenies by somatic embryogenesis

The development of reliable clonal propagation technologies is a requisite for performing Multi-Varietal Forestry (MVF). Somatic embryogenesis is considered the tissue culture based method more suitable for operational breeding of forest trees. Vegetative propagation is very difficult when tissues are taken from mature donors, making clonal propagation of selected trees almost impossible. We have been able to induce somatic embryogenesis in leaves taken from mature oak trees, including cork oak (Quercus suber). This important species of the Mediterranean ecosystem produces cork regularly, conferring to this species a significant economic value. In a previous paper we reported the establishment of a field trial to compare the growth of plants of somatic origin vs zygotic origin, and somatic plants from mature trees vs somatic plants from juvenile seedlings. For that purpose somatic seedlings were regenerated from five selected cork oak trees and from young plants of their half-sib progenies by somatic embryogenesis. They were planted in the field together with acorn-derived plants of the same families. After the first growth period, seedlings of zygotic origin doubled the height of somatic seedlings, showing somatic plants of adult and juvenile origin similar growth. Here we provide data on height and diameter increases after two additional growth periods. In the second one, growth parameters of zygotic seedlings were also significantly higher than those of somatic ones, but there were not significant differences in height increase between seedlings and somatic plants of mature origin. In the third growth period, height and diameter increases of somatic seedlings cloned from the selected trees did not differ from those of zygotic seedlings, which were still higher than data from plants obtained from somatic embryos from the sexual progeny. Therefore, somatic seedlings from mature origin seem not to be influenced by a possible ageing effect, and plants from somatic embryos tend to minimize the initial advantage of plants from acorns